Cannot open the web interface. No. 8080 listener.

Similar Questions

• BlackBerry Smartphones connected to the Internet, but cannot open the web browser, facebook...

  My Blackberry Bold 9900 connects to internet with wi - fi and 3 G/edge connection (w / caps) and receive emails, but cannot open the web browser, facebook, twitter, bbm, app world... for the last two days (I think that I have improved some applications). Everyone knows the same?
  Can someone help me pls? Thank you!!

  OK, at least you get the signal necessary for many applications work.

  Please remove your battery while your phone is on, and then replace it.

  Let us know if that helps you.

• under vista and it cannot open the Web 192.168.1.1 for linksys router

  I have a Linksys wrt54gl router wireless and I hard wire plugged into my computer so I connected to the internet broadband router. Connections to work because the flashing lights on the front of the router blink correctly.  So I open internet explore and type 192.168.1.1 in the hope that I get the page for the router setting, but instead, I get a message that explore cannot detect the Web site. Wrong address. I get a similar error with Firefox.  The computer was working fine connected directly to the internet bandwidth so sure the internet works. The IP address is set to automatic detection. Someone at - it ideas?

  Hello

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Aironet 1240AG - cannot use the web interface

  I'm trying to set up a new Aironet 1240AG. After that she won an IP from the DHCP in my LAN, I can always connect using the web interface. I use an Internet Explorer 6.0 on Win 2000. It keeps telling me cannot find the server. Please I need help

  Hi Olivier,.

  First off you're welcome :) This method really works without the need for a WLC, be patient. Check the address static IP put you on your TFTP (* range 10.0.0.2 to 10.0.0.30)

  Rename the access point image file in the folder of the server TFTP c1200-k9w7 - tar.default for a series of 1200 access point

  Looks like a problem TFTP (no firewall on your PC?)

  Take a look at the details in the following threads that each has to do with TFTP. There are some great tips to troubleshoot TFTP some of my NetPros favorite ScottMac, Cisco's Stephen and Jack Young. The likely culprit may be you need to uncheck "Hide extensions for known file types" on your server TFTP;

  http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=WLAN%20Radio%20Standards&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc042b/8#selected_message

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc03c4/2#selected_message

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddbf271

  I hope this helps! Good luck!

  Rob

  Remember messages useful rate...

• Cannot open the web page in another tab of the browser in application for the custom shop page

  I have a custom stores html page and an external link (such as < a href = "...) (' > < / a >) in this html page.  Now when I type this external link, it opens the web page in the same container and crush the store custom html page. But I hope that it can open the external page in another tab of the browser in application with the button "close".   As this external link is in mode folio. Please let me know if I could do it. Thank you

  We do not support this with the current v2 API. We will be adding in release 27 support for this.

  Neil

• Cannot open the web page "recovery media".

  According to the brochure '10 Recovery right Media Pro Windows', we are supposed to go to http://www.lenovo.com/lenovorecovery to apply for restoration of media.

  However, when you open this page, all I get is an error message: cannot display the requested page

  Correct the problem.

  OK, I found the cause of the problem.

  Lenovo.com is one of those rare sites that don't work well with the module of the Electronic Frontier Foundation HTTPS Everywhere .

  I have disabled HTTPS and now the page is loaded.

• Firewall settings is enabled, disabled and cannot open the Web page in Internet Explorer: "IE can not display the webpage".

  Original title: how to manually configure the firewall?

  Let me know how I can configure my firewall setting manually as it is said that your firewall setting is disabled. I have HomeXP, SP3. I am now faced with another problem with IE8 when I try to open another page, I find this error-"IE can not display the webpage". Sometimes, it works when it is updated and not some time.

  Hello

  1. do you use third-party security software that runs on the computer firewall settings?
  2. What is the error code / message displayed when trying to turn on the Windows Firewall?
  Please follow these steps in the KB article to turn on the Windows Firewall.
  Step 1
  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
  http://support.Microsoft.com/kb/283673
  Step 2
  How to enable Internet Connection Firewall in Windows XP
  http://TechNet.Microsoft.com/en-us/library/bb456986.aspx
  Follow the steps in order and read the content.
  See also,
  
  "Internet Explorer cannot display the webpage" error in Internet Explorer
  
  http://support.Microsoft.com/kb/956196

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  
  I hope this helps.

• Cannot open the Web Photo Gallery in CS4

  In my CS2 PS Web Photo Gallery version was already installed. In CS4, is not. I downloaded the plugin from Adobe, but it will not appear when I say PS / file / automate. The address where I placed the folder is:

  C:\Program Files\Adobe\Adobe Photoshop CS4 (64 bit) \Presets\Web Photo Gallery

  Does anyone have an idea why I can not access it via the PS4, version 11? I have to "turn on" in some way to the PS?

  Thanks, Airpix

  You have installed the presets for the web gallery, but you also need to install the plugin:

  II WebContactSheet in the folder plugins/automate

  C:\Program Files\Adobe\Adobe Photoshop CS4 (64 Bit) \Plug-ins\Automate

  Make sure that you install the 64 bit version of the plugin WebContactSheet II.

  Added the: included in the download is a pdf file that explains the exact locations

  where goes the different things.

  MTSTUNER

  Post edited by: MTSTUNER

• Cannot open the web camera, says side-by-side configuration incorrect.

  said its all in the title, but it has worked one day stop, cannot be opened because side-by-side configuration is incorrect and I went into the event log and found the error and its reason is:

  Microsoft.VC80.OpenMP, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.762' is not found. Please use sxstrace.exe for detailed diagnosis.

  Any help would be greatly appreciated. Thanks in advance

  "' Microsoft.VC80.OpenMP, processorArchitecture ="x 86"publicKeyToken ="1fc8b3b9a1e18e3b", type ="win32", version ="8.0.50727.762 ' is not found. Please use sxstrace.exe for detailed diagnosis.

  This means that you will install the Visual C++ 2005 Sp1 Runtime (and NO, 2008):

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200b2fd9-AE1A-4a14-984d-389c36f85647&displaylang=en
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Cannot open the Web site nk.pl - already reset, uninstall and install new ff.

  After a virus (-serach.com, special box, search protect) changed my search on the site, I can't open a website nk.pl.
  Already done all that is described in the internet to get rid of virus, but still can't open a site.

  Separate the issue;
  Shows details of the system;

  Plug-ins installed

  Shockwave Flash 17.0 r0
  Shockwave Flash 11.8 r800

  Having multiple versions of a program can cause problems.

  Take uninstaller from here:
  Uninstall Flash Player | Windows
  Uninstall Flash Player | Mac
  Reinstall the latest version.

  Flash Player Version 17.0.0.134
  https://www.Adobe.com/products/flashplayer/distribution3.html

  https://support.Mozilla.org/en-us/KB/Firefox-cant-load-websites-other-browsers-can

• Cannot open the Web site, that I have used for over a year, get message "no site configured at this address", works very well to explore. What can I do?

  The site worked almost all day and then all of a sudden, he had disappeared. Only got the above message. The site opened very well in IE, which I generally don't use.

  Could you post the link?

  Try clear your recent history:

  • Recent history of claire

• New Server 2.0 installation, cannot run the Web Interface.

  Just installed VMWare server 2.  Windows XP X 64.

  Used to use 1.x and when they change to the new style because I couldn't make it work then or on the left.

  Now I have a job that needs me to use it. So no choice.

  I get a mixture of problems just trying to connect to the * ing WebService.

  First: No answer, just a white screen.

  Second, it evokes the login, and when I type my details it won't let me. Myriad of errors of the operation failed on the server is down.

  Third: He seems to accept the details, but just once more with a white screen.

  Third: It lets me and display stuff, but then the lower panel said only: "loading...". "and nothing else.

  I tried:

  activation of SSL2 (makes the connection bit faster when it worked, but not worked as frequently)

  Confirming the service is running

  Upgrade to the latest version of Java and TomCat say to use

  Also checking hosts for its content file and deleted everything else, but the details of closure. Still nothing.

  Change of address to the server name localhost. No dice.

  Changed static ip address. No help

  Changed the address bar to the ip address. Nada

  Tried with and without secure connection and above all different addresses. Guess what has been the result? Nothing.

  etc etc.

  Now I'm at the end of my * attached with this stupid program.

  I have much better to do than wax autour with this shit.

  Please can someone make me a sort.

  TIA

  edooze1

  First of all, XP is not a supported for VMware Server host operating system. Second, please stop using certain "key" words you used in your post, even if VMware Server mind...

  In all, it sounds like everything just works very slowly in your case. Have you considered using Vmware Player already? It does not use this web GUI, with that many people have problems.

  However, what run you next to VMware Server?

  Is there a special reason why use VMware Server? He is no development work was for him more.

  AWo

  VMware Mod community

• PowerConnect 2824 cannot enter in the web interface

  My company bought a powerconnect 2824, in any case this is the 1st time, I configure the Dell switch. I managed to Setup using cli mode, but after anyway I can't config interface only able to display information and also cannot enter the web interface with the default setting, or after.

  What I did wrong?

  Have you tried to connect to the web gui via different ports? you mentioned port 1 light does not, which is the port you are trying to access the switch through?

  When you are connected to the CLI, which is the result of show # configuration interfaces?

  What are the customers IP settings to?

• Cannot open Expression Web 4 program... says "program stopped working."

  Downloaded and installed .NET and Expression Web 4 but cannot open the web program... says "program stopped working" already deleted and reinstalled... same message

  Hello

  It comes to the installation of vista operating system instance

  Please repost in the community of expressions microsoft at the link below

  http://expression.Microsoft.com/en-us/default.aspx

• iPod touch will not got to some Web sites - "Safari cannot open the page because the network connection has been lost."

  Safari refuses to go to certain websites (facebook.com, youtube.com) on my iPod Touch and instead displays this error:

  S afari cannot open the page because the network connection has been lost.

  The bubble at the top where I typed in the URL doesn't change, it always says "facebook.com" or something else.

  No matter where I am, so it won't get fixed by resetting my home Wi - Fi router. Other sites load fine. I have reset the iPod, too, by pressing the sleep button and one on the front (whatever it's called) until I see the apple logo. I also did 'Story clear and data Web site' in the Safari settings.

  I searched the web and found a number of threads that start with similar complaints, but I can't find one where the problem has been resolved in fact.

  Thank you!

  Not "no matter where I am," means, it happens with all networks?

  If so:

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar