Windows don't update also cannot access the websites for microsoft in normal mode.

Similar Questions

• Unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon.

  Original title: I tried to apply the photo viewer to open a file and the photo viewer icon replaced each icon on my desktop. Now I can't open anything on my desktop. What is going on?

  The name is below the icon, but the correct icon has been replaced by windows Photo Viewer icon. When I click to open it, it says: windows Photo Viewer cannot open this photo because Photo Viewer does not support this file format, or you do not have the latest updates... I don't know what I did!

  Hi,

   

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you are unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon. Please let me know if you do not experience this problem.

  I understand the inconvenience caused to you. I'll help you solve the problem!

   

  Before troubleshooting, I have little information on the issue.

  1. did you of recent changes to the computer before this problem?

  Try the methods suggested in the article below and check after each method:

  Method 1: Icons change incorrectly in Windows: http://support.microsoft.com/kb/2396571

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base: 322756. How to back up and restore the registry in Windows: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

   

  Method 2: Run scan files system (CFS) auditor, to repair missing or corrupted system files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• Windows 7 does not start & cannot access the advanced boot options

  Ive a 4Yr old windows 7 computer acer laptop, on start-up I get black screen saying:

  PXE - E61: media test failure, check cable of
  PXE - MOF: out broadcom PXE ROM.
  No boot device insert the diskette boot & press one touch
  same message when I insert the disc of recovery, even when ive him asked to boot from the cd first through f2 drive, I can enter the setup through f2, but can't access boot options via f8, help! I don't know what else to do.
  Thanks in advance.

  Hello

  There are normally 3 possible reasons of this error you have.

  1 BIOS Boot Oder set to Network Boot: BIOS settings to check the boot order.

  Check the boot sequence, if possible and make sure that HD is set to 1 in the boot order

  2. check the cable connections between the motherboard and the hard disk to ensure that they are not loose

  3. doesn't have a hard drive.

  Test the hard drive.

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And you can also use this method to test your hard drive:

  "SeaTools for DOS.

  http://www.Seagate.com/support/downloads/SeaTools/

  "SeaTools for BACK tutorial.

  See you soon.

• Cannot access the site Web Microsoft Updates - error 0X8024402F code (cannot display page)

  original title: the site has encountered a problem and cannot display the page you are trying to view. Error 0X8024402F code I can not download the updates to my computor

  I tried to download the updates on Microsoft Update, but get the error 0X8024402F Code. The website has encountered a problem and cannot display the page you are trying to see!

  0X8024402F

  Treatment of the external WU_E_PT_ECP_SUCCEEDED_WITH_ERRORS file completed with errors.

  It is a Windows Update error, which indicates some sort of connectivity problem.

  See - you may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941>

  UTC/GMT is 07:19 Monday, January 2, 2012

• Cannot access the password for administrator on Win7, how can we access this account?

  There are two accounts on this computer. An administrative and standard user.

  I can't access the administrative account. I forgot the password for this account.
  I can access the standard user account, but I can't change the administrative password because his account not administrative and I do not know the password on the admin account.
  How can I either change the standard user to admin user without having need of the admin password or how can I access the administrator account?
  The admin account is my main account with everything I need.
  His family win7 premium is a desktop computer.
  I, also, don't have Internet. The only internet I have is on my mobile phone with limited data.
  This is why I can't download anything to help.
  Help or knowledge is much appreciated.
  Thank you

  I can't access the administrative account. I forgot the password for this account.

  There are a lot of options built into Windows to help you out of this situation:
  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
  • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

• Cannot search the network for Microsoft Windows (XP SP3)

  Hello

  On holiday, I have a PC running Windows 8.1 and a former under XP (SP3), both connected to a Netgear router for Internet access.

  Under Windows, 8.1, the XP PC appear not at all, even when I search by name.

  The WinXP when I click (down posted by exploring folders) on "Microsoft Windows network", I got an Error Message:

  Impossible to scan the network, you have no network, or the network is not started.

  I've followed all the recommendations for sharing files between Windows 8.1 and XP:

  Same network type: private

  Even working group: PERSONAL

  Different names.

  Option of sharing files on two PCs in network settings.

  Windows 8.1, I chose: encryption 40 or 56-bit.

  I can share folders between your desktop in Windows 7 with Win 8.1 and Windows XP Home.

  File sharing has been possible, in my view, before I've upgraded to SP3 of XP last year.

  I know that Windows XP is not supported, but I need this old PC to display movies on my old TV (S_Video)!

  Thanks for your replies.

  MdParis

  In addition...

  You may translate the error of another language?

  On the XP computer.

  • Click Start, run, type "services.msc" (without the quotes) and click OK
  • Scroll down to "Workstation" (probably the last item in the list) and double-click it
  • Make sure the "Startup type" is "automatic".
  • Click on the 'Start' button (if the service has already started, please report this), and then click OK
  • Close the Services applet

• Cannot start the Toshiba Satellite A300 in normal mode or safe mode.

  Original title: Normal and safe mode start two taped please wait

  Hi my problems started last night when I tried to open my laptop (Toshiba Satellite A300 Windows Vista)

  In normal mode starts near the top of the screen loads fine up please wait...
  I left on until this morning that then the screen turned black and nothing was clickable.
  I can't boot mode safe either, as it happens the same thing.
  Sometimes when I try and start it tells me that the C drive has something wrong with it and what are the fixing.
  A warning saying that this file is corrupted and unreadable left me with a scintillating display that fluctuated between black and the background of vista.
  I managed to log on once while my office quickly froze and I had to close my laptop.

  Startup Repair cannot detect all problems. I restore Windows to an earlier date with the system restore but that did nothing to help and when I tried to restore the system to an earlier date of even the sign of a catastrophic failure rises.

  I'm really ideas outside the restoration of factory settings.
  Someone please help.
  Thank you

  Hello

  
  Have you tried another recovery option?
   
  
  I suggest you to press the F8 key as the computer starts up to the top and check the option in the advanced boot menu.
   
  
  Advanced, including safe mode startup options
   
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode-1
   
  
  If you are able to open the advanced boot menu then you can execute the menu command prompt and type the command and check.
   
  
  Type CHKDSK c:/r or
  
  Type CHKDSK c:/f
   
  
  Important: even if running chkdsk on the drive if any bad sectors are found, chkdsk attempts to repair this sector and if all data on this sector it could get lost.
   
  
  If you are not able to perform the steps then you may need to get the Vista installation DVD. You can contact the manufacturer for more details.

• Cannot find the Code for Microsoft Flight C46.

  Original title: Code for Microsoft Flight C46

  I installed Microsft vol. Purched the C - 46 and can't find the Code

  It depends on where you bought the code but anyway that steam and xbox marketplaces they both have support teams and contact information where you should be able to apply the code you purchased.

• Dvd - cd rom on my laptop (Acer Aspire 5515) stop working, I get a code 19 saying that windows cannot access the drivers for this device., how can I solve this problem?

  I had used the Device Manager, try to reinstall the drivers fix for windows etc nothing works

  Hello

  ·         Did you make any changes before the show?

  I suggest that you run the fixit provided in the link below and check if it helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Cannot access the websites of google on ipad

  I have an iPad 2 and can go in safari, but can not enter in all of the proposed web sites, nothing happens.

  Hello

  Try to connect your device to ITunes via your pc or laptop if you did a backup on your computer go to backup and restore manually and restore the backup on the date of your previous to your device and that should work as it worked for my I Pad generation 4, however my I-Pod touch, I bought a few months ago are very good with my I Phone 5 C bought in November.

  TOny

• BearShare was downloaded on this computer. It has been removed, however when I try to access the website for my employer employee, he appears in Bearshare and wont let me enter my account.

  BearShare was downloaded on this computer. It has been removed, however when I try to access my employer employee Web site, it appears in Bearshare and wont let me you on my account how to remove?

  original title: removal of bearshare
  'Sherry and TomCaserta' wrote

   

  BearShare was downloaded on this computer, it was deleted but when I try to access my site used, employers it appears in bearshare and wont let me enter my account how to remove?

   

   

  BearShare default installs a lot of other rubbish - and changes your research assistants.

  Download and install Malwarebytes Anti-Malware (www.malwarebytes.org - free version) - update but do NOT enable the trial of real-time protection. Run a full scan of the system.

   

  When done, delete everything it finds. Open Internet Options and change your home page you what you want, and then in the tab programs, click on Manage Add-ons - change research you favorite.

   

• Cannot access the windows installer

  try to install itunes and other windows updates and I get error 643 on updates and cannot access the windows with itunes installation programs.  Is there something blocking these files that they do not work

  try to install itunes and other windows updates and I get error 643 on updates and cannot access the windows with itunes installation programs.  Is there something blocking these files that they do not work

  RE: Windows updates :
  You should be psoting in section updates from Windows:
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Here's the tutorial for number 643.
  Have a look while you wait for answers from the section updates to Windows.

  Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  Re: Itunes
  You wrote. .. Cannot access windows with itunes installation programs.
  The Windows Installer Service could not be accessed
  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/

  Questions about Apple products will be better displayed on the Apple forums.
  It is where are the experts itunes and quicktime.
  Apple Discussion: Category: itunes
  http://discussions.Apple.com/category.jspa?categoryID=149

  Discussion of Apple - installation abd update itunes for Windows
  http://discussions.Apple.com/forum.jspa?forumid=792

  Problem installing itunes or quicktime for Windows
  http://support.Apple.com/kb/HT1926

  Uninstall and reinstall itunes and quicktime
  http://support.Apple.com/kb/HT1923

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Cannot open the icon for MY COMPUTER

  I use Windows XP Home Edition and cannot open the icons for MY COMPUTER AND MY DOCUMENTS AND SOME SHORTCUTS

  Hello

  1 are. what icons you referring?
  2. what exactly happens when you try to open the icons or documents or shortcuts? If you get an error message and then, after return the exact error message.
  3 How long have you been faced with this problem?
  4. don't you make changes on the computer before this problem?

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
  How to ask a question
  http://support.Microsoft.com/kb/555375

• Windows 7 error: "Windows cannot access the specified device, path or file. You don't have appropriate permissions to access. »

  Hi I encounter an error message "Windows cannot access the specified device, path or file. You don't have appropriate permissions to access. »

  The error message every time I click on administrative tools of the window (including the Control Panel, windows update, the Windows Explorer, etc.) but without impact on other programs I have.

  I rebooted in safe mode and discover that everything works fine (no error message will appear when you click on window management tools).

  I proceed to do a clean boot-> first disable all services of third parties (message yet to come), and then clear the components of the service windows (message yet to come)

  I tried to type "explorer.exe" in the start menu-> search field then click right highlight to run with administrative rights, then received another message of error "Server execution failed".

  I am the administrator account on this PC - and have full access.

  The error seems to have appeared on 11 August after Windows Update the following:

  Update of security for Microsoft Windows (KB2536276, 2556532 2559049, 2560656, 2563894, 2567680), and

  Update for Microsoft Windows KB2563227

  A security update for the Microsoft.net framework 4 client profile (verson 1)

  There is no installation of any software or updates outside the windows update.

  I also tried to restore the windows before August 10, 2011, but that did nothing.

  As the error prevents me to access any object Admin window - I'm unable to retrieve the product ID and write to Microsoft Tech and ask for help.

  I hope some of you can offer the suggestion of possible solutions (I really want to re - install window 7 and other software, I'm sure).

  Thank you.

  My solution works in about 2 minutes, it's a very weird error and only happened to 3 jobs in the last 3 years, this solution does not need to create another account if local administrator is active and allows access to the corrupt user documents ect.

  Log in as the local administrator or a domain administrator

  If the local administrator is not activated refer to http://support.microsoft.com/kb/555910 and after completing these newspapers of steps on the local administrator account.

  Locate the user for example files. C:\Users\[username]\

  If you see no AppData press Alt to see the toolbar at the top of the window, select Tools > folder options, go to the view tab and select "Show hidden files, folders and drives" click OK.

  Go to AppData\Local

  Select all (Ctrl + a).

  Delete

  * Do not delete credentials (as it will remove their wallpaper) *.

  This allows to release the error.

• Cannot open programs and files error: windows cannot access the file or the path of the specified unit. you don't have the appropriate permissions to access the item

  Original title: Search programs and files will not let me

  I get no response from the search - when I hit to see more results I request = aa indicating that windows cannot access the file or the path of the specified unit.  you don't have the appropriate permissions to access the item

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2 when was the last time it was working fine?

  3 are you facing this problem only with Web sites or other sites also?

  I suggest you try the steps below and check if it helps

  Step 1:
  Try to start the computer in safe mode with network and check if the same error message, here is the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:
  However, to work around the problem, try the step below:

  a. right click on the program file, select Properties.

  b. on the general tab, at the bottom, you will see listed in the issue of safety: this file came from another computer and might be blocked to help protect this computer.

  c. unlock.

  d. click on apply.
  e. click OK.

  Hope this information is useful.