Cannot ping router

Similar Questions

• Cannot Ping router remotely

  Currently, I get to work with WRT54GL router for customers who are looking for a cheaper camera, I am trying to ping the public IP address of remote, so we could properly monitor these devices and I get a timeout of the request, I looked at the settings that I couldn't find anything to help me on this Please let me know if anyone has had knowledge of how do.

  It's on the Security tab. I think that on the WRT54GL called 'Block anonymous Internet requests. Turn this option off.

  If she's not still go through, it may also be the ISP blocks...

• Comments of the ESXi5 cannot ping gateway

  Hello

  Structure of the environment

  
  Router (192.168.6.1)
  -Linux
  Virtual machine workstation - 8
  -ESXi5 (192.168.6.220)
  -srv01 ((Win2008r2) (192.168.6.221)(static pi))
  -srv02 (WIn2008r2) (192.168.6.111) (DHCP)

  Srv01 can ping srv02
  Srv01 can ping ESXi5
  Srv01 cannot ping

  SRV02 can get the ip address of the server DHCP (192.168.6.1)
  SRV02 can ping srv01
  SRV02 can ping ESXi5
  SRV02 cannot ping router

  Router cannot ping srv01, srv02
  Router can ping ESXi5

  Question:
  What should I do:
  to get srv01 ping router
  to get the router to ping srv01?

  See http://kb.vmware.com/kb/287 for instructions on enabling virtual for your ethernet adapters promiscuous mode.

• Cisco 5505, inside, I cannot ping the external IP of the router, but inside I can ping anything else

  Hello

  5505 Cisco's internal IP: 10.10.0.1 static, securty level 100

  External IP of Cisco 5505: 36.X.X.23 Dhcp, 0 security level

  of within peut all host external example ping by host 10.10.0.3 to google.com

  inside peut ping all domestic example of the host, host 10.10.0.3 to 10.10.0.5 included the internal IP of Cisco 10.10.0.1

  inside peut ping ip network address different on the same network from my router external example the host 36.x.x.25

  cannot ping inside the IP 36.X.X.23?

  from outside peuvent ping the IP 36.X.X.23

  outside peuvent ping different extenal network 36.X.X.X network ip

   
  How can I ping the 36.X.X.23 of the Interior, any suggestions?

  It's called background management which is not supported in the ASA

  https://Tools.Cisco.com/bugsearch/bug/CSCtd86651

  That's why is not and this will never work the ASA design does not

  It will be useful.

• Router and Switch cannot ping each other

  Hello

  I just build a lab at home.

  In my current lab, I have 2 SW and 3 the router.

  I have a problem, I do not know what Miss me in my config. My router cannot ping my SW.

  and I also want to change my LAN from VLAN 1 interface connection at 30 of VLAN... but when I configure the VLAN 30 he show me line is in PLACE but the Protocol is DOWN.

  Another question, if I want to create a VLAN with a different address, what should I do?

  for example

  VLAN 10 > 10.10.10.1

  VLAN 20 > 20.20.20.1
  etc...

  interface Vlan1 description LAN ip address 10.10.10.1 255.255.255.0 secondary ip address 30.30.30.1 255.255.255.0 secondary ip address 40.40.40.1 255.255.255.0 secondary ip address 20.20.20.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat inside ip virtual-reassembly dot1q tunneling ethertype 0x9100 hold-queue 100 out!

  Here's the conf for my RT. ROUTER > 877SW > 2950 24 WS

  CISCO_877#sh runBuilding configuration...
  
  Current configuration : 3468 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname CISCO_877!boot-start-markerboot-end-marker!enable secret 5 $1$.ISW$71jzJ0Or0nenXZd/8D8.x/!no aaa new-model!!dot11 syslogip cefno ip dhcp use vrf connectedip dhcp excluded-address 20.20.20.0 20.20.20.30!ip dhcp pool LAN network 20.20.20.0 255.255.255.0 domain-name SYS.local default-router 20.20.20.1  dns-server 202.123.2.6 202.123.2.11  lease 0 4!!!!!username admin privilege 15 secret 5 $1$A1V4$GR9sPtPVXDRoOiDKRtC1M1! ! archive log config hidekeys!!!!!interface ATM0 description (OUTSIDE)ADSL_WAN no ip address no ip redirects no ip unreachables no ip proxy-arp no atm ilmi-keepalive pvc 8/35  encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto !interface FastEthernet0!interface FastEthernet1 dot1q tunneling ethertype 0x9100!interface FastEthernet2!interface FastEthernet3!interface Vlan1 description LAN ip address 20.20.20.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat inside ip virtual-reassembly dot1q tunneling ethertype 0x9100 hold-queue 100 out!interface Vlan30 description LAN no ip address no ip redirects no ip unreachables no ip proxy-arp shutdown hold-queue 100 out!interface Dialer0 description WAN_OUTSIDE ip address negotiated ip mtu 1498 ip nat outside ip virtual-reassembly max-reassemblies 1024 encapsulation ppp ip tcp adjust-mss 1400 dialer pool 1 dialer-group 1 no cdp enable ppp authentication chap callin ppp chap hostname [email protected]/*  */ ppp chap password 7 071C385F5C001D0403 ppp pap sent-username [email protected]/*  */ password 7 120A1C04000208053E ppp ipcp mask request ppp ipcp route default ppp ipcp address accept!ip default-gateway 20.20.20.1ip forward-protocol ndip route 0.0.0.0 0.0.0.0 Dialer0ip route 10.10.10.0 255.255.255.0 Vlan1!no ip http serverno ip http secure-serverip nat inside source list 110 interface Dialer0 overload!access-list 110 permit ip 20.20.20.0 0.0.0.255 anyaccess-list 110 permit ip 10.10.10.0 0.0.0.255 anyaccess-list 110 permit ip 30.30.30.0 0.0.0.255 anyaccess-list 110 permit ip 40.40.40.0 0.0.0.255 anyaccess-list 110 permit ip 50.50.50.0 0.0.0.255 anyaccess-list 110 permit ip 60.60.60.0 0.0.0.255 any!!!control-plane!banner motd ^C
  
  :'######::'##::::'##:'########::'######::'##::::'##:'##... ##: ##:::: ##: ##.....::'##... ##: ##:::: ##: ##:::..:: ##:::: ##: ##::::::: ##:::..:: ##:::: ##:. ######:: #########: ######:::. ######:: #########::..... ##: ##.... ##: ##...:::::..... ##: ##.... ##:'##::: ##: ##:::: ##: ##:::::::'##::: ##: ##:::: ##:. ######:: ##:::: ##: ########:. ######:: ##:::: ##::......:::..:::::..::........:::......:::..:::::..::
  
  ^C!line con 0 no modem enableline aux 0line vty 0 4 password 7 xxxx login!scheduler max-task-time 5000end
  
  CISCO_877#

  And this is for my SW

  CATALYST_2960_01#sh runBuilding configuration...
  
  Current configuration : 5166 bytes!version 12.1no service padservice timestamps debug uptimeservice timestamps log uptimeservice password-encryption!hostname CATALYST_2960_01!enable secret 5 $1$MGrN$PtHgL3KfH0vy7Mr1Fo0hF.!ip subnet-zero!ip ssh time-out 120ip ssh authentication-retries 3vtp mode transparent!!spanning-tree mode rapid-pvstno spanning-tree optimize bpdu transmissionspanning-tree extend system-idspanning-tree vlan 1-4093 priority 16384!!!!vlan 10 name ADSL!vlan 20 name GUEST!vlan 30 name MANAGEMENT!interface Port-channel1 switchport trunk allowed vlan 1,10,20,30 switchport mode trunk switchport nonegotiate spanning-tree cost 1!interface FastEthernet0/1 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/2 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/3 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/4 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/5 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/6 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/7 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/8 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/9 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/10 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/11 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/12 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/13 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/14 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/15 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/16 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/17 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/18 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/19 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/20 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/21 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/22 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/23 switchport trunk allowed vlan 1,10,20,30 switchport mode trunk switchport nonegotiate channel-group 1 mode active!interface FastEthernet0/24 switchport trunk allowed vlan 1,10,20,30 switchport mode trunk switchport nonegotiate channel-group 1 mode active!interface Vlan1 ip address 20.20.20.2 255.255.255.0 no ip route-cache!interface Vlan10 no ip address no ip route-cache shutdown!interface Vlan30 no ip address no ip route-cache shutdown!ip default-gateway 20.20.20.1ip http server!line con 0line vty 0 4 password 7 xxxx loginline vty 5 15 login!!end
  
  

  Thanks in advance.

  Eliane,

  Please remove the etherchannel port f0/24 of the switch configuration and store it in the trunk.

  interface FastEthernet0/24 switchport trunk allowed vlan 1,10,20,30 switchport mode trunk switchport nonegotiate channel-group 1 mode active  <<< Remove this 

  Configure f0 on the router as trunk I think has 877, a switchport which fe interfaces are a part of. To display the corresponding Lass on the router, that you need to configure the VLANS corresponding on the router, then only the Lass will be in a State of going / up otherwise it will be in a down state. See if that helps. Thank you, hyacinth

• WAG320N - LAN clients cannot ping clients WLAN.

  Hi all

  I wonder if you can help. I currently have a router WAG320N, which seems to work out for a small problem.

  However, the problem I am facing is that my LAN clients cannot ping my clients wireless and vice versa.

  I googled this problem which has recommended that the AP isolation is off which is was by default.

  Any other ideas?

  Thanking in advance.

  Sprite

  As you are not able to ping customers wireless to wireline customers. Turn on the isolation of the AP.

  See if that helps you.

• Once the VPN connection is established, cannot ping or you connect other IP devices

  Try to get a RV016 installed and work so that people can work from home.  You will need to charge customers remote both WIN XP and MAC OS X.

  Have the configured router and works fine with the VPN Linksys client for WIN XP users.  Can connect, ping, mount the shared disks, print to printers to intellectual property, etc.

  Can connect to the router fine with two VPN clients third 3 for Mac: VPN Tracker and IPSecuritas.  However, once the connection is established, cannot ping the VPN LinkSYS router or any other IP address on the LAN Office.  Turn the firewall on or off makes no difference.

  Is there documentation anywhere that describes how the LinksysVPN for Windows Client communicates so these can be replicated in 3rd VPN clients from third parties for the Mac in OS X?

  The connection with IPSecuritas and VPN Tracker is performed using a shared key and a domain name.  It is not a conflict of IP address network between the client and the VPN 192.168.0.0/24 network.

  VPN Tracker and IPSecuritas are able to connect to the routers CISCO easy VPN with no poblem.

  Any ideas on how to get the RV016 to work for non-Windows users?

  We found and fixed the problem, so using VPN Tracker or current IPSecuritas on OS X people have access to the LAN via the RV016 machines. The "remote networks" in the screen BASE in VPN Tracker has been set on the entire subnet: 192.168.0.0/255.255.255.0 the in the RV016 has been set to the IP of 192.168.0.1 to 192.168.0.254 range. Even if the addresses are essentially the same, without specifying the full subnet in the RV016 has allowed the connection to do but prevented the VPN client machine to connect because the RV016 would pass all traffic to the Remote LAN. Change the setting of 'local group' in RV016 settings in the screen "VPN/summary/GroupVPN', 'Local Group Zone' for the subnet 192.168.0.0/24 full solved the problem.

• Cannot ping Lan devices in Vlan

  Hello

  I looked for a solution to this for the week without success. I came across a Cisco C3560, which is used because of its ability of poe to power some Deskphones Voip. While the works of great poe, machines connected to the switch can only communicate with each other and don't can't ping or otherwise access any device connected directly to the router of the network.

  The Cisco switch is configured with a vlan and a default gateway, but nothing comes out by behind the switch. On connected devices can ping by default gateway (192.168.0.1 - a tp-link router), receive a lease dhcp from the router said successfully and can connect to the internet, but on the local network, nothing works. (unable to connect to the printer connetced directly to the router or other computers connected directly to the router.

  Any advice? I am new to cisco switches, don't know what I'm doing here. I'm just trying to get devices that are connected directly to the switch to communicate with devices connected directly to the router.

  Switch#show runBuilding configuration...

  Current configuration : 1528 bytes!version 12.2service configno service padservice timestamps debug uptimeservice timestamps log uptimeno service password-encryption!hostname Switch!enable secret 5 {}{}{}{}{}{}{}{}{}{}{}{}!no aaa new-modelclock timezone UTC 2system mtu routing 1500ip subnet-zero!!!!no file verify autospanning-tree mode pvstspanning-tree extend system-id!vlan internal allocation policy ascending!interface FastEthernet0/1!interface FastEthernet0/2!interface FastEthernet0/3!interface FastEthernet0/4!interface FastEthernet0/5!interface FastEthernet0/6!interface FastEthernet0/7!interface FastEthernet0/8!interface FastEthernet0/9!interface FastEthernet0/10!interface FastEthernet0/11!interface FastEthernet0/12!interface FastEthernet0/13!interface FastEthernet0/14!interface FastEthernet0/15!interface FastEthernet0/16!interface FastEthernet0/17!interface FastEthernet0/18!interface FastEthernet0/19!interface FastEthernet0/20!interface FastEthernet0/21!interface FastEthernet0/22!interface FastEthernet0/23!interface FastEthernet0/24 switchport mode access!interface GigabitEthernet0/1!interface GigabitEthernet0/2!interface Vlan1 ip address 192.168.0.26 255.255.255.0 no ip route-cache!ip default-gateway 192.168.0.1ip classlessip default-network 192.168.0.0ip http server!access-list 1 permit any log!control-plane!!line con 0line vty 0 4 password XXXXXXXXX login length 0line vty 5 15 password XXXXXXXX login length 0!end

   Switch#show interface

  Vlan1 is up, line protocol is up Hardware is EtherSVI, address is 001e.bd27.c4c0 (bia 001e.bd27.c4c0) Internet address is 192.168.0.26/24 MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 3 packets/sec 138534 packets input, 9472693 bytes, 0 no buffer Received 0 broadcasts (68 IP multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 30296 packets output, 2248820 bytes, 0 underruns 0 output errors, 1 interface resets 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/2 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c484 (bia 001e.bd27.c484) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:56, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 46000 bits/sec, 37 packets/sec 5 minute output rate 582000 bits/sec, 71 packets/sec 1941044 packets input, 327622438 bytes, 0 no buffer Received 38375 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 30699 multicast, 0 pause input 0 input packets with dribble condition detected 3224783 packets output, 2069682884 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out
  
  FastEthernet0/4 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c486 (bia 001e.bd27.c486) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:01, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec 129069 packets input, 64947010 bytes, 0 no buffer Received 9953 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9759 multicast, 0 pause input 0 input packets with dribble condition detected 600269 packets output, 45540585 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/6 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c488 (bia 001e.bd27.c488) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:50, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec 32693 packets input, 4244428 bytes, 0 no buffer Received 9942 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9759 multicast, 0 pause input 0 input packets with dribble condition detected 588460 packets output, 45003331 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/8 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c48a (bia 001e.bd27.c48a) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:30, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 32694 packets input, 4243413 bytes, 0 no buffer Received 9934 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9757 multicast, 0 pause input 0 input packets with dribble condition detected 588485 packets output, 45009466 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/12 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c48e (bia 001e.bd27.c48e) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:28, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 32742 packets input, 4252075 bytes, 0 no buffer Received 9947 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9763 multicast, 0 pause input 0 input packets with dribble condition detected 588497 packets output, 45019272 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/13 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c48f (bia 001e.bd27.c48f) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:13, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec 148160 packets input, 73818106 bytes, 0 no buffer Received 9973 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9760 multicast, 0 pause input 0 input packets with dribble condition detected 599666 packets output, 49045070 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/14 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c490 (bia 001e.bd27.c490) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:05, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec 129165 packets input, 68409495 bytes, 0 no buffer Received 9982 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9773 multicast, 0 pause input 0 input packets with dribble condition detected 600283 packets output, 45551497 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/18 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c494 (bia 001e.bd27.c494) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:49, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 21000 bits/sec, 18 packets/sec 5 minute output rate 13000 bits/sec, 16 packets/sec 606386 packets input, 88151136 bytes, 0 no buffer Received 159883 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 55198 multicast, 0 pause input 0 input packets with dribble condition detected 941617 packets output, 308269004 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/20 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c496 (bia 001e.bd27.c496) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:54, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 1000 bits/sec, 1 packets/sec 5 minute output rate 1000 bits/sec, 2 packets/sec 515813 packets input, 87006769 bytes, 0 no buffer Received 21466 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 19952 multicast, 0 pause input 0 input packets with dribble condition detected 1858112 packets output, 1700009146 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/24 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c49a (bia 001e.bd27.c49a) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 546556 packets output, 41182636 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  GigabitEthernet0/1 is up, line protocol is up (connected) Hardware is Gigabit Ethernet, address is 001e.bd27.c481 (bia 001e.bd27.c481) MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive not set Full-duplex, 1000Mb/s, link type is auto, media type is 10/100/1000BaseTX SFP input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 556000 bits/sec, 83 packets/sec 5 minute output rate 76000 bits/sec, 63 packets/sec 4457827 packets input, 3961330567 bytes, 0 no buffer Received 15028 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 11213 multicast, 0 pause input 0 input packets with dribble condition detected 3822373 packets output, 728132696 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out
  
  

  Switch#show vlan

  VLAN Name     Status         Ports---- -------------------------------- --------- -------------------------------1     default active    Fa0/1, Fa0/2, Fa0/3, Fa0/4, Fa0/5, Fa0/6, Fa0/7, Fa0/8, Fa0/9, Fa0/10, Fa0/11, Fa0/12, Fa0/13, Fa0/14, Fa0/15, Fa0/16                        Fa0/17, Fa0/18, Fa0/19, Fa0/20, Fa0/21, Fa0/22, Fa0/23, Fa0/24, Gi0/1, Gi0/21002 fddi-default act/unsup1003 token-ring-default act/unsup1004 fddinet-default act/unsup1005 trnet-default act/unsup

  VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------1 enet 100001 1500 - - - - - 0 01002 fddi 101002 1500 - - - - - 0 01003 tr 101003 1500 - - - - - 0 01004 fdnet 101004 1500 - - - ieee - 0 01005 trnet 101005 1500 - - - ibm - 0 0

  Remote SPAN VLANs------------------------------------------------------------------------------

  Primary Secondary Type Ports------- --------- ----------------- ------------------------------------------

  Hello

  first thing, please edit your post and remove your remote vty lines access password

  never send passwords on a public forum for the just in case production equipment

  line vty 0 4
  password xxxxxx

  ***********************

  Your question

  What is the configuration of the router as a switch which seems to work correctly you're saying and I configured its doing its job, don't forget you said that you cannot route no between the router and the router switch should take care of this, whats the vlan ports on the router are on is - what the same subnet do they get an ip address in the same subnet off dhcp as devices of switching, if they do, and you cannot ping them to the same subnet theres something upward on the side of the router it would treat for layer 3 routing ip traffic

  the ping to the router devices connected to the cisco switch and can the device on the router cannot ping devices switches

  If you move a device out of the router and attach it to the doe sit switch still work ok, reach the talk of the internet to other devices on the switch?

  As there is a layer 2 switch you don't need this command you have your entry door you can remove it.. .IP default-network 192.168.0.0

• ASA 5540 - cannot ping inside the interface

  Hi all. We have recently upgraded PIX to ASA5540 and we saw a strange thing going. In a Word, we can ping the inside interface of the ASA from any beach on our 6500 network (which is connected directly behind the ASA on the inside), but one where our monitoring tools are placed. Inside there is an ACL that allows all of our core networks, but it does not help that the interface is really strange.

  In the ASDM, I see messages like this:

  ID ICMP echo request: 2004 x.x.x.x y.y.y.y on the inside interface to. I don't think that's the problem, but I could be wrong.

  This is also the configuration of the interface VLAN VIRTUAL local area network from which we cannot ping inside the interface we can ping to and since this VLAN and machines without problem. The only problem is ping the inside interface of the ASA.

  interface Vlanx

  IP x.x.x.x 255.255.255.0

  IP broadcast directed to 199

  IP accounting output-packets

  IP pim sparse - dense mode

  route IP cache flow

  load-interval 30

  Has anyone experiences the problem like this before? Thanks in advance for any help.

  Can you post the output of the following on the ASA:-

  display the route

  And the output of your base layer diverter: -.

  show ip route<>

  HTH >

• Cisco ezvpn ASAs cannot ping each other inside interfaces

  I have a set ezvpn in place with a 5506 (position B) client-side and a 5520 (location A) server-side. I have successfully connected vpn, and traffic flows. My problem is that I can't SSH in the location b. investigate this more than I can not ping is within the interface of the ASA opposing, or the machines inside each ASA ASA.

  I found the following links that describes a scenario similar to mine, but nothing on one of them helped me.
  http://www.experts-exchange.com/questions/28388142/cannot-ping-ASA-5505-inside-interface-across-VPN.html
  https://www.fir3net.com/firewalls/Cisco/Cisco-ASA-proxy-ARP-gotcha.html
  https://supportforums.Cisco.com/discussion/11755586/Cisco-ASA-VPN-established-cant-ping

  I joined sanitized versions of these two configs. Any help is appreciated.

  Hi Adam

  The site of B I'm not able to see "management of access to inside. Please try to set up the same. He could solve the problem.

  Also on the instruction of the ASA takes place nat can you please try to add keywords 'search non-proxy-arp route'.

  something like:

  nat (inside,outside) source static (Location A)_Networks (Location A)_Networks destination static (location B)-remote_network (location B)-remote_network no-proxy-arp route-lookup

  as I have noted problems with inside access to interface via the VPN when those keywords are not applied. If I remember correctly 8.6.x ASA version had a bug regarding the same. Cordially Véronique

• cannot ping remote ip on ASA no firewall (VPN site to site on SAA) configired no proxy, icmp not inspect, no chance

  some help me

  (Q) ping remote ip unable on ASA is not Firewall not on pc (VPN site to site on SAA) configired no proxy, icmp not inspect, no chance

  Note - I can ping PC but not the same subnet ip on ASA2 L3

  PC---> > ASA1 - ASA2<>

  Hi Matt,

  Let me answer your question in two points:

  • You cannot ping an ASA on another interface other than the one where you are connected to the ASA of.

  For example, ASA1 and ASA2 are connected through their interfaces 'outside '. ASA1 (or any other device on the external interface) can not ping/access ASA2 on his (ASA2) within the interface. The only time wherever this can be substituted is a tunnel VPN with the command "access management" configured for other interface, for example management-access inside

  • Traffic ASA1 ping to a remote client behind ASA2 won't over the VPN tunnel and as such is not encrypted. That's because ASA1 will forward traffic based on its routing table that probably this way through its 'outside' interface Except that traffic is allowed with the ASA2 (using the ACL), it will fail.

  We can do on the routers of sourcing our ping to another interface, but it will not work on the SAA.

• cannot ping between remote vpn site?

  vpn l2l site A, site B is extension vpn network, connect to the same vpn device 5510 to the central office and work well.  I can ping from central office for two remote sites, but I cannot ping between these two vpn sites?  Tried to debug icmp, I can see the icmp side did reach central office but then disappeared! do not send B next?  Help, please...

  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  !
  object-group network SITE-a.
  object-network 192.168.42.0 255.255.255.0
  !
  object-group network SITE-B
  object-network 192.168.46.0 255.255.255.0
  !
  extended OUTSIDE allowed a whole icmp access list
  HOLT-VPN-ACL extended access-list allow ip object-CBO-NET object group SITE-a.
  !
  destination SITE-a NAT (outside, outside) static source SITE - a static SITE to SITE-B-B
  !
  address for correspondence card crypto VPN-card 50 HOLT-VPN-ACL
  card crypto VPN-card 50 peers set *. *.56.250
  card crypto VPN-card 50 set transform-set AES-256-SHA ikev1
  VPN-card interface card crypto outside
  !
  internal strategy group to DISTANCE-NETEXTENSION
  Remote CONTROL-NETEXTENSION group policy attributes
  value of DNS server *. *. *. *
  VPN-idle-timeout no
  Ikev1 VPN-tunnel-Protocol
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value REMOTE-NET2
  value by default-field *.org
  allow to NEM
  !
  remote access of type tunnel-group to DISTANCE-NETEXTENSION
  Global DISTANCE-NETEXTENSION-attributes tunnel-group
  authentication-server-group (inside) LOCAL
  Group Policy - by default-remote CONTROL-NETEXTENSION
  IPSec-attributes tunnel-group to DISTANCE-NETEXTENSION
  IKEv1 pre-shared-key *.
  tunnel-group *. *.56.250 type ipsec-l2l
  tunnel-group *. *.56.250 ipsec-attributes
  IKEv1 pre-shared-key *.
  !

  !

  ASA - 5510 # display route. include the 192.168.42
  S 192.168.42.0 255.255.255.0 [1/0] via *. *. 80.1, outside
  ASA - 5510 # display route. include the 192.168.46
  S 192.168.46.0 255.255.255.0 [1/0] via *. *. 80.1, outside
  ASA-5510.

  !
  Username: Laporte-don't Index: 10
  Assigned IP: 192.168.46.0 public IP address: *. *.65.201
  Protocol: IKEv1 IPsecOverNatT
  License: Another VPN
  Encryption: 3DES hash: SHA1
  TX Bytes: bytes 11667685 Rx: 1604235
  Group Policy: Group remote CONTROL-NETEXTENSION Tunnel: remote CONTROL-NETEXTENSION
  Opening time: 08:19:12 IS Thursday, February 12, 2015
  Duration: 6 h: 53 m: 29 s
  Inactivity: 0 h: 00 m: 00s
  Result of the NAC: unknown
  Map VLANS: VLAN n/a: no
  !
  ASA - 5510 # display l2l vpn-sessiondb

  Session type: LAN-to-LAN

  Connection: *. *.56.250
  Index: 6 IP Addr: *. *.56.250
  Protocol: IPsec IKEv1
  Encryption: AES256 3DES hash: SHA1
  TX Bytes: bytes 2931026707 Rx: 256715895
  Connect time: 02:00:41 GMT Thursday, February 12, 2015
  Duration: 13: 00: 10:00

  Hi Rico,

  You need dynamic nat (for available IP addresses) for the two side to every subset of remote access to the other side remote subnet and so they can access every other subnet as if both from the traffic from your central location.

  example:

  Say, this IP (10.10.10.254) is unused IP to the central office, allowed to access remote tunnel 'A' and 'B' of the site.

  object-group network SITE-a.
  object-network 192.168.42.0 255.255.255.0
  !
  object-group network SITE-B
  object-network 192.168.46.0 255.255.255.0

  dynamic source destination SITE-a. 10.10.10.254 NAT (outdoors, outdoor)
  public static SITE SITE-B-B

  destination NAT (outdoors, outdoor) SITE-B 10.10.10.254 dynamic source
  SITE static-SITE a

  Hope this helps

  Thank you

  Rizwan James

• Customer remote VPN cannot ping certain IP

  My Cisco VPN client can establish the tunnel with my successful ASA5505 Office vpn but cannot ping some IP such as an internal server (10.100.194.6).

  FIREWALL-1 # ping 10.100.194.6
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 10.100.194.6, wait time is 2 seconds:
  !!!!!
  Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/1 ms

  Why I can't ping certain IP?

  Help, please.

  Thank you.

  Hey Kevin,

  Check out the capture, it is obvious that there is a problem of internal routing as we can see packets from the VPN client requests, but there is no response from the server package.

  Please ensure that the server has pointing on the Firewall VPN subnet route.
  HTH.

  Kind regards

  Dinesh Moudgil

  PS: Please check the useful messages.

• Cannot ping via the VPN client host when static NAT translations are used

  Hello, I have a SRI 3825 configured for Cisco VPN client access.

  There are also several hosts on the internal network of the static NAT translations have a services facing outwards.

  Everything works as expected with the exception that I cannot ping hosts on the internal network once connected via VPN client that is internal IP addresses have the static NAT translations in external public addresses, I ping any host that does not have static NAT translation.

  For example, in the example below, I cannot ping 192.168.1.1 and 192.168.1.2, but I can ping to the internal interface of the router, and any other host on the LAN, I can ping all hosts in the router itself.

  Any help would be appreciated.

  Concerning

  !

  session of crypto consignment

  !

  crypto ISAKMP policy 10

  BA 3des

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group vpnclient

  key S3Cu4Ke!

  DNS 192.168.1.1 192.168.1.2

  domain domain.com

  pool dhcppool

  ACL 198

  Save-password

  PFS

  netmask 255.255.255.0

  !

  !

  Crypto ipsec transform-set-SECURE 3DES esp-3des esp-sha-hmac

  !

  Crypto-map dynamic dynmap 10

  86400 seconds, life of security association set

  game of transformation-3DES-SECURE

  market arriere-route

  !

  card crypto client cryptomap of authentication list drauthen

  card crypto isakmp authorization list drauthor cryptomap

  client configuration address card crypto cryptomap answer

  map cryptomap 65535-isakmp ipsec crypto dynamic dynmap

  !

  interface GigabitEthernet0/0

  NAT outside IP

  IP 1.2.3.4 255.255.255.240

  cryptomap card crypto

  !

  interface GigabitEthernet0/1

  IP 192.168.1.254 255.255.255.0

  IP nat inside

  !

  IP local pool dhcppool 192.168.2.50 192.168.2.100

  !

  Note access-list 198 * Split Tunnel encrypted traffic *.
  access-list 198 allow ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255

  !
  Note access-list 199 * NAT0 ACL *.
  access-list 199 deny ip 192.168.0.0 0.0.255.255 192.168.0.0 0.0.255.255
  access-list 199 permit ip 192.168.1.0 0.0.0.255 any

  !

  Sheep allowed 10 route map
  corresponds to the IP 199

  !
  IP nat inside source map route sheep interface GigabitEthernet0/0 overload

  !

  IP nat inside source static 192.168.1.1 1.2.3.5
  IP nat inside source static 192.168.1.2 1.2.3.6

  The problem seems to be that static NAT take your nat exemption.

  The solution would be:

  IP nat inside source static 192.168.1.1 1.2.3.5 sheep map route
  IP nat inside source static 192.168.1.2 1.2.3.6 sheep map route

  HTH

  Herbert

• Cannot ping ASA inside the interface via VPN

  Hello

  I have a scenario with tunel VPN between a router and ASA and can ping subnet behind ASA subnet behind the router (and), but I cannot ping the ASA inside the interface on the VPN tunnel. I need to access the remote location ASDM. How can it be done?

  Thanks for your suggestions.

  Remi

  Hello

  You must have the 'inside access management' command configured on the SAA.

  If you run a 8.3 software or newer on the SAA, should also look at the configuration 'nat' IF the above command solves your problem

  -Jouni