Possible drive with backup problem

Similar Questions

• iCloud drive with Sierra problems

  When I upgraded to Sierra, during the implementation, I registered inadvertently to the top enable My Documents & Desk Top to synchronize without realizing account. Everything was going well in the Finder, until I realized that I was looking for to iCloud Drive/Documents not iMac/Documents and realized what I had done. I went in the iCloud preferences and unchecked Documents & Desk Top iCloud Drive options but I got a pop up stating 'If you keep Documents on your desk and you file Documents will be visible in iCloud drive away. No documents in iCloud drive are deleted. "

  I want to stop iCloud sync my Documents and office of the road and come back as it was before moving on to the Sierra of Finder.

  Hello man pine.
  Thank you for using communities of Apple Support.

  If I understand your message which is more, you want to use iCloud drive and are concerned that you have received the message, "If you keep Documents on your desktop and you file Documents will be visible in iCloud drive away. No document will be deleted from iCloud drive. "When you disable iCloud Drive, the folder remains in the Finder, but you can move the documents from the folder of the iCloud drive to your Documents folder or any other folder of your choice. The only difference is that any changes to these documents will not be synchronized via iCloud to your other devices.

  Best regards.

• upgrade a SATA drive with the largest disk ata

  I have an old Presario S5000NX with a second ATA hard disk of 500 GB. Can I replace this 500 GB drive with a new Seagate Barracuda 750 GB Ultra ATA/100 drive with no problem with the BIOS or motherboard?

  According to our database, this unit came with 40 GB HARD drive and the system's cable support all hard drives ATA-66/100.

  There is an update of the BIOS available for the motherboard 3.17 if it is not updated:

  http://ftp.HP.com/pub/softlib/software2/COL5057/PV-17526-1/sp24024.exe

• I save by mistake several times my C drive to the D drive and this resulted in my D drive is almost full with backups of 150 GB. How can I delete the backups of my D drive?

  I make mistake and have backed up all my C drive on my D drive contains and this resulted in my D drive is almost full with backups of 150 GB drive C. How can I clean all my backups of my D drive?

  Hi, Mr. flame.

  What is your operating system?

  If you have been creating full backups, the backup only that you keep is the last.

  Data backup file: offers the possibility to delete backups of data on the target files to free up space.

  Backup disk space management

  http://blogs.technet.com/b/filecab/archive/2009/11/23/managing-backup-disk-space.aspx

  You can also delete them using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

• MCBUILDER. EXE running rampant, competing with updates for CPU and possibly associated with an update failed chess SP2 and the backup and restore

  Running Vista Home Premium SP1 and the system has been slow and freezing. MCbuilder appear to be using 50 to 100% of CPU, and it is a process that seems no way of killing. I disabled in Services, but again, it seems to start without any particular reason and hinders attempts to install programs or updates vista hogging resources. This can be associated with a problem that has arisen since June because I am not able to perform backups or set restore points (gives the error "0 x 81000101 the creation of a shadow copy has timed out"). I tried to install SP2 in the hope that it will not solve the problem, but the failure of installation and install KB947821 doesn't seem to work either. As the restoration of the system is defective, I would be grateful for the pointers to the resolve or completely remove this mcbuilder problem.

  You have COMODO or AVG Antii-virus installed on your system?  It is known problems with these two programs and MCbuilder.exe.  I don't have Microsoft Resource Builder Cache as a service in the Services (so I can't activate or deactivate it)-you which version of Vista to help (bit, SP-number version)?  I have 32 bit Vista Business SP2. I see no way to turn it off in order to close it with the Task Manager when it is - with the exception, but who could become annoying if it happens frequently and with multiple instances.  I could find nothing useful in Knowledge Base Microsoft on it hogging resources although I've seen a few threads using Bing (which is where I came up with COMODO and AVG anti-virus conflicts).

  You can be infected by malware (which may be the origin of the program to activate and run "without reason"). While in Test Mode safe mode (press F8 during startup and select mode safe mode with networking repeatedly) to run anti-malware programs. To resolve this problem (if it is a problem) download, install, and run the following two programs: http://www.malwarebytes.org/mbam.php and http://www.safer-networking.org/en/index.html.  You can also try a free trial of Pandasoft (www.pandasoft.com).  Before you download pandasoft, uninstall all anti-virus program you currently use (because the installation and execution of two simultaneously can cause conflicts, freezes and all sorts of problems).  Once you have uninstalled your current AV program, download, install, update and scan using Pandasoft.  I think you might be amazed at how much she notes that other software missed.  Once complete, uninstall pandasoft and re - install your current AV program (unless you decide to spend that I did when I tried about 4 years ago).  You can also try the new, free Microsoft Security Essentials http://www.microsoft.com/security_essentials/default.aspx (with the same caveat that only program AV one ALONE can be installed and running on your system at any time). Restart after finishing all the scans and see if the problem has been resolved.

  Try a system restore to a point in time BEFORE the problem started (which can be a problem if it began all the way back in June - you should have posted here then when this process would probably have worked).  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points (but I doubt that you will have a pretty far back and forth to the system restore may not be a viable option).  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well it will complete with no corruption, he couldn't fix it (if there is such corrouption post here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  I bet there is something involving the program or associated with this program.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side.

  I hope one of these procedures can solve your problem (probably the SFC command or controls anti-virus).  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  BTW, for update of the problems you are having with SP2, post on the Forum of Windows Update to: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in update issues will be happy to help you with your concerns and get SP2 running on your system (perhaps despite this particular problem).  As you say, it can even solve the problem - who knows.

  Good luck!
  Lorien - a - MCSE/MCSA/network + / A +.

• Windows the dates that I am up to 22 gigabytes off 69.5 gigabits on drive D. Can someone help me with this problem so I don't run out of space

  original title: windows dates

  on my computer windows vista home basic, is Drive - D were all my windows updates are stored. I do not stor photos or other long-term files on my computer.
  I ' am up to 22 gigabytes of 69.5 gigabits on drive D. Can someone help me with this problem so I don't run out of space.
  Also all update my windows go back as far as the year 2008. Note-windows update are the only element which appear on the D drive and also when I backup windows is were I notice less space on this drive. Is there something I can do so I don't run out of space on this drive?
  could someone help me with this problem.

  I have found, do not delete the old windows updates.
  they could corrupt your entire system.

• Seeking help with a problem with the LR I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message, "could not create a JPEG sponsor limit you 92 k Bytes.Plea.

  Seeking help with a problem with the LR

  
  

  I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message.

  "Could not create a respondent JPEG limit you 92 k Bytes.Please increase the size limit files
  . (1).
  .....

  I tried to increase the size of the file several times,

  I left LR

  I restarted the computer.

  
  

  Any help or advice for this problem will be greatly appreciated

  
  

  Thanks in advance

  
  

  @stu

  Not because of the number of pixels, in this photo and the chosen level of quality there is no possible way to create a JPG file to the size of file you requested. You must change your export settings.

  Show us a copy of the export dialog box, so we can see clearly the part file setting and the size of the Image.

  Also indicate the number of this image (width and height) pixels after cropping (as appropriate) and prior to export.

• Is it possible to replace the hard drive with an SSD? or would it be too expensive?

  Is it possible to replace the hard drive with an SSD?

  or would it be too expensive?

  Yes.  There are several alternatives.  I found a way relatively inexpensive, using a map of mSATA (very small SSD) and an adapter to connect it to the connector IDE 44 pin internal of my PowerBook.  It works very well.  Rather than repeat what I posted previously, you can watch these two topics (which also has good info, other users)

  Re: This win to install a SSD drive in a PowerBook G4?

  Re: SSDS  (my post is halfway - "this is how I did with my trusty Pismo...) »)

  FYI - I have used the adapter is even cheaper now

  https://www.Amazon.com/GP/product/B009BA8V4M

• Driver Toshiba G450 with Vista32bit problem

  Hello.

  I bought a Toshiba G450 phone with 3G modem. It is tiny and really well designed.

  My computer is running with the 32-bit edition of Windows Vista.
  I first installed default Wellphone software supplied with default CD packed. Installation of the software is OK, but when I'm launching Wellphone XT, it tries to install the drivers for the G450 and it fails with pilot HSDPA. On the Device Manager screen, it is said, "pilots is not designed for this platform.

  So I dug a little short on this forum and read that I should use 3_7_671_33 version for Vista. So I downloaded suite url and launched the installation.

  Setup does not work. In the end, I'm launching WellPhone XT, which begins to re - install the drivers. But when she fails with driver HSDPA.
  On the Device Manager screen, it is said, "pilots is not designed for this platform. So I double click on the device and I try to update driver with HSDPA USB Modem\WellPhone XT\InstallDrivers\drivers\TOSHIBA\DRV_TOSHIBA_PIKE \WinVista folder, but it fails too.

  Do you have some instructions to make this device work?

  Thanks in advance.

  PS: With all due respect, It's a little discouraging to have a brand new, out of box material that does not work.

  Hey Buddy

  To be honest I put t have a laptop Toshiba G450 and I never had the chance to test a. So I can't help you resolve this problem.

  But a question: have you ever contacted an authorized service provider or operator of mobile telephony? In my opinion, they should be able to help you because most of the questions here are only on laptops and Windows so that you will not find any mobile phone experts here.

  Good luck!
  And if you have solved your problem, you can post it here again. Maybe that other users are interested too, and so your thread might be useful. :)

• backup to external hard drive with the Mavericks El Capitan

  How to back up the El Capitan on the same external hard drive with the Mavericks?

  How Mavericks backup external hard disk?

• iPhone (with iOS9.1) initialize with backup using iOS9.1: incompatibility problem

  Hi guys.

  I bought an iphone 6s (mounting iOS 9.1) and tried to initialize with the iCloud backup made with my previous iphone 5 using iOS9.2.

  When I try to choose the back upward, I got a message saying "no backup is compatible with iOS 9.1 present on this phone.

  What can I do to solve the problem?

  Thank you

  A typo in in the subject...

  iPhone (with iOS9.1) initialize with backup using iOS9. 2: incompatibility problem

• Backup HD on the external hard drive with/without Time Machine backup

  I use a drive external iomega hard so that I can save my Mac hard drive. I used the iomega to back up my old computer before and succeeded with just drag / drop the files I needed. I simply slipped fell the Mac HD icon in my iomega DHM and was able to open all the files inside. It made me skeptical however, if I would be able to open the icon Mac HD with all my files so it was on another mac. All information that I looked upwards on a hd on a disk external drive to backup talk using Time Machine, which I've never used, and was not sure if it's even necessary to use.

  Here's what I mean by dragging my HD on the external hard drive.

  It is not at all a backup. This is just a link to the internal drive. Is there a reason why you do not want to use Time Machine?

• ThinkPad Edge S430 - is possible to replace the hard drive with an ssd?

  Hey, Lenovo,.

  I bought a Thinkpad Edge S430 and wonder if it is possible to replace the hard drive with an ssd?

  Kind regards

  Mikael

  
  

• Is it possible to change the 500 GB HARD drive with an SSD on my HP Pavilion MS228sc?

  I wonder if it is possible to change the 500 GB HARD drive with an SSD on my HP Pavilion MS228sc?

  If 'yes', I guess I have to go for a SATA SSD if there is. But I have to worry about other specs?

  If 'Yes'... what could be.

  I googled my question but no answers... so I ty Wizzards :-) Forum

  @Lord_Nikon

  In fact, this is not true. As long as he uses a large SSD enough it will be able to use the recovery media. I suggest using a SSD of 256 or 512 GB if budgeted for the upgrade...

  He doesn't have to make a Windows 7 installation USB drive and use the activation key license on the certificate of authenticity from the PC Windows to perform a cleanup to install.

  One of them should be on your PC. The Prodct key is what is needed for installation and activation online.

  

• Driver with ATI Radeon HD 3850 AGP under Windows 7 Pro 32 bit problems

  Windows 7 Pro 32 bit reports after installation of the driver that no driver is present. There was patch drivers provided by ATI to solve these problems, but these drivers did not resolve the problems. Has anyone had success with this installation, and if so, would you please provide me with how you did this? Thank you. BTW, I did the ususal uninstall and then install, reinstalled the operating system via a facility clean and then installed the drivers, etc, etc. So far,nothing has worked. After Googling this issue I found that many others have had similar experiences with these driver problems. Now I have XP Pro and Win 7 Pro installed via dual boot and XP Pro is running pilots ok with no problems. Thank you!

  I came across the work of question three years ago on one of my machines.

  It is a problem of compatibility between the nForce 3 and AGP.  I don't remember the exact details, but with a nForce 3 and similar day SIS chipsets and a few others when they had a dual-core CPU in them, they would change the AGP port to use a PCI driver or something of this nature to enable the multi-core support (such as it's been hacked on toward the end of their development).  On Windows Vista and upward, such a workaround solution does not work.  SiS and some other published updates driver for the motherboard chipsets which he sorted, nVidia did not worth it, despite nForce 3 sold as Vista compatible.  nVidia pulled this stunt with a lot of things at the time, including their GeForce 5 cards, saying they supported Vista, same with the beta drivers and then they just canned originally.  They took both.

  It is a solution that will be the kind of work, but as you may have guessed, you will need to disable one of the cores of your CPU.

  You can do this by going to msconfig, click on the Startup tab, click Advanced... and changing the number of processors at 1.

  Reboot and your graphics drivers will spring magically to life.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet atwindowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)