Cannot print on 8620 via the option on my network wireless

Similar Questions

• Cannot turn off bluetooth from the option of the family disappeared in the context menu of Tablet

  Hello

  Well, I installed Win 7 on my X61t, as well as new software from Lenovo, and I can't understand how to disable bluetooth now. I used to do that via the context Menu in tablet, I had radios settings there and I could turn off/turn on the WiFi and Bluetooth separately there. Now, I have only one option of radio wireless disable, which basically does the same thing as the wireless switch, so it's a bit useless.

  I guess that option could have dissaperaed because I have not installed logins now (and I can't install it because I'm fine with what I get with 7).

  So, how can I disable BT now? I tried through the taskbar icon, I tried via the Control Panel, through network connections, even through the Device Manager. Even when I disable all BT devices and connections Bluetooth LED remains on, so it is not totally disabled at the hardware level. Of course, so I want to be able to turn off quickly, as I did through the context menu of the Tablet, via the control panel is not really a solution anyway.

  Oh, and I don't know if it's important, but the Bluetooth light is on all the time during the boot now, and I don't think that it was before. Although maybe I just never used on startup with bluetooth turned on, so I didn't notice... here, not sure.

  Any ideas?

  Thanks, has soon!

  Dear Stansfield

  Hope a low-tech suggestion works for you.
  Have had a similar experience with the portability of devices two radio WLAN and Bluetooth individually vs black & white radio power.

  Found I needed to load the last shortcut key driver in your case for a X 61 Tablet 7764 CTO,
  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-68009

  Then use the combination Fn and F5 (in blue) instead of other options in some menus of the Windows user interface.
  And voila, I found that the behavior has been defined in the "Fn + F5 parameters" button at the bottom of the pop-up window, the second box option
  "Alternate between turn off all wireless radios and by turning on all radios.
  instead of the first choice that I wanted
  'Display a menu that allows me to control the parameters of power to radio wireless in my system individually.

  Had the behavior corrected, and now he's doing what I want to happen.
  It will be useful for you, too.

  concerning
  Mika

• Cannot print.  Receive messages "The Document cannot be printed." "No pages selected.  Cannot print image.  I tried the suggested solution in wire 30/11/15, but that has not worked.  Have current printer driver.

  Cannot print.  Receive messages "The Document cannot be printed." "No pages selected.  Cannot print image.  I tried the suggested solution in wire 30/11/15, but that has not worked.  Have current printer driver.

  Hi cirjcus,

  In this case, I will propose you to perform a new installation of drive.

  Download Adobe Reader and Acrobat cleaning tool - Adobe Labs

  Adobe - Adobe Acrobat Reader DC Distribution

  Try again with DC first then with XI.

  Thank you

  Abhishek

• InDesign extension is not displayed when run via the option "Debug as".

  InDesign extension is not displayed when run via the option "Debug as".

  Hi all

  I worked on an application InDesign Extension for a few months now. I am Member creative cloud. I FlashBuilder 4.6 + Extension Builder 2.1 (both licensed versions) and InDesign CS6 and CC installed on my machine. The application is targeted for InDesign CS 5.x and 6 CS and CC versions. So far, I've tested it via "run as" and "Debug as" options of the FB; and in time, I "export as" ZXP for internal versions.

  I'm having two problems, do not know if they are related.

  1. when I try to bundle manifest, it fails with the following error: (at first, I thought it was an installation problem, but I did another test project and bundle manifest works on that one)

  Could not open the Editor: an unexpected exception was thrown.

  Details:

  java.lang.NullPointerException

  at com.adobe.cside.ui.editors.pages.MainBundlePage.isPointProductSupported (unknown Source)

  at com.adobe.cside.ui.editors.pages.MainBundlePage.createTargetAppSection (unknown Source)

  at com.adobe.cside.ui.editors.pages.MainBundlePage.createFormContent (unknown Source)

  to org.eclipse.ui.forms.editor.FormPage$ 1.run(FormPage.java:152)

  at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)

  at org.eclipse.ui.forms.editor.FormPage.createPartControl(FormPage.java:150)

  at org.eclipse.ui.forms.editor.FormEditor.pageChange(FormEditor.java:471)

  at com.adobe.cside.ui.editors.BundleManifestEditor.pageChange (unknown Source)

  at org.eclipse.ui.part.MultiPageEditorPart.setActivePage(MultiPageEditorPart.java:1067)

  at org.eclipse.ui.forms.editor.FormEditor.setActivePage(FormEditor.java:603)

  at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:352)

  at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:670)

  at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:465)

  at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)

  at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:289)

  at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2945)

  at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2850)

  to org.eclipse.ui.internal.WorkbenchPage.access$ 11 (WorkbenchPage.java:2842)

  to org.eclipse.ui.internal.WorkbenchPage$ 10.run(WorkbenchPage.java:2793)

  at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)

  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2789)

  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2773)

  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2756)

  at com.adobe.cside.ui.popup.actions.CSIDEBundleEditorAction.run (unknown Source)

  at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)

  at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection (ActionContributionI tem.java:584)

  to org.eclipse.jface.action.ActionContributionItem.access$ 2 (ActionContributionItem.java:501)

  to org.eclipse.jface.action.ActionContributionItem$ 5.handleEvent (ActionContributionItem.java:411)

  at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)

  at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)

  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)

  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)

  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)

  at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)

  at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)

  at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)

  at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2696)

  at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2660)

  to org.eclipse.ui.internal.Workbench.access$ 4 (Workbench.java:2494)

  to org.eclipse.ui.internal.Workbench$ 7.run(Workbench.java:674)

  at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)

  at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:667)

  at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)

  at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start (FlashBuilderApplication.ja goes: 108)

  at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)

  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication (EclipseAppLau ncher.java:110)

  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start (EclipseAppLauncher.jav one: 79)

  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)

  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)

  at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)

  at org.eclipse.equinox.launcher.Main.run(Main.java:1410)

  Here is my manifest file:

  <? XML version = "1.0" encoding = "UTF-8"? >

  < ExtensionManifest Version = "2.0" ExtensionBundleId = "ConnectXPress".

  " ExtensionBundleVersion ="1.0.0"xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance ">

  < author >

  <! [CDATA [Swati Sisodia]] >

  < / author >

  < ExtensionList >

  < extension Id = "com.pubpress.CXP.extension1" Version = "1.0" / > "

  < / ExtensionList >

  < ExecutionEnvironment >

  < parameter Listehotes >

  < host name = "IDSN" Version = "7.0" / >

  < host name = "Clement POUPARD" Version = "7.0" / >

  < / parameter Listehotes >

  < LocaleList >

  < Locale code = 'All' / >

  < / LocaleList >

  < RequiredRuntimeList >

  < RequiredRuntime Name = "CSXS" Version = "2.0" / >

  < / RequiredRuntimeList >

  < / ExecutionEnvironment >

  < DispatchInfoList >

  < Id = "com.pubpress.CXP.extension1 extension" >

  < DispatchInfo >

  < resources >

  < SwfPath >./ConnectXPress.swf < / SwfPath >

  < / resource >

  life cycle of the <>

  < AutoVisible > true < / AutoVisible >

  < / life cycle >

  < UI >

  Panel < type > < / Type >

  ConnectXPress < menu > < / Menu >

  < geometry >

  < size >

  < height > 520 < / height >

  < width > 350 < / width >

  < / size >

  < / geometry >

  < icons >

  < Type icon = 'Normal' >./icons/normal_icon.png < / icon >

  < Type icon = "RollOver" >./icons/rollover_icon.png < / icon >

  < Type icon = "Disabled" >./icons/disabled_icon.png < / icon >

  < Type icon = "DarkNormal" >./icons/dark_icon.png < / icon >

  < Type icon = "DarkRollOver" >./icons/dark_icon.png < / icon >

  < / icons >

  < /UI >

  < / DispatchInfo >

  < / extension >

  < / DispatchInfoList >

  < / ExtensionManifest >

  2. my other problem is, I recently changed the name of the project and the name of the application in the Menu, and since I did that, my extension is not displayed when I perform "run as" or "Debug as" Flash Builder. To enforce as / debug as, the code compiles and appears in the folder "bin-debug", the application is triggered, but when I navigate to Windows > Extensions, my extension is not present here. Although when I export as ZXP and install via Extension Manager CS 6 or CC, it shows my last extension in Windows > Extensions with the correct name.

  Any help is very appreciated. Please let me know if I need to provide more information.

  Kind regards

  Swati.

  I've solved both of my problems. And I thought I'll post for others.

  First problem, where the manifest failed Bundle of FlashBuilder, was resolved by a change in the manifest.xml (who lives at /.staged-extension/CSXS). The change I made was tag. Earlier it was (generated by FlashBuilder 4.5):

  I changed it to:

  I did a bit of hit and trial and it seems that FlashBuilder generated 4.5 tag host with the Version with only the specialties of the minimum version while FlashBuilder 4.6 requires that all versions of specialties listed in the Version attribute.

  The second problem of debug/run as not to install the extension properly in InDesign, has been set as a result of the software update of FlashBuilder.

  This is what brought me to do:

  I retraced my steps and realized last thing I did before the "Debug as Adobe InDesign Extension" of in FlashBuilder broke on my machine has been updated InDesign CS6 to the latest available version, which probably ended up with flash/flex versions of InDesign and FlashBuilder. Therefore, perform a fixed update debugging.

• How to increase the font size. the details of what to do via the options did not work at all.

  I went through the firefox to the options tab, font size of content options and an increase of 16 including on the Advanced tab. looks still unchanged at font size 10.
  any ideas please?

  Perhaps unchecking (via the advanced under the content tab button) which reads "Allow pages to choose their own fonts, instead of my selections above" will help you.

  Also FYI, when you browse websites using CTRL and "+" (that is, the plus sign) will increase the font size. CTRL and "-" (minus sign) will reduce the font size. and CTRL and "0" (zero) will restore the original font size.

• HP 7520 - cannot print custom size of the photo tray photo

  I am trying to print a photo of small 2.5 cm wide on a 4 x 6 "piece of photo paper. If I choose the "custom" paper size then I can select 4 x 6 on the right and put 4 copies of the photo on the sheet.  But when I click on print it always goes for the main paper tray and then gives me an error (I emptied the main tray because I don't want it to be used). I don't want to use a large sheet of paper.

  How can I force to take the paper from the photo bin? I tried every setting I can think. The selection of paper size automatically assumes that it is the size of the photo I want! If I choose 4 x 6 as my paper size it only allows me to print one full page. I need a tiny picture, preferably several times on one page. Without doubt, I should be able to say print the picture of this exact size and paper tray! Can anyone help please?

  I use the HP Photosmart 7520 and Windows 7. Thank you.

  SeoulGal,

  Thanks for the quick response. You have me a little confused, so I just want to clarify - initially you were trying to print on 4 X 6 paper, you then changed to 10 x 15, because the paper was not shooting from the photo tray? I assume you mean 10x15cm which is always the same size from 4 x 6 paper.

  Anyway I understand that he won't shoot the photo tray paper, you place the tray in the photo tray when selecting to print? Have a look here at how change printer settings so it pulls the correct status bar: Print the Photos saved on your computer (Windows)

  Please don't forget to take a look at the paper handling section in the printer Specifications as 2.5 photo size you are interested in is not, see here: 7520 Photosmart e-all-in-one printer printer Specifications

  I could open my Windows Live Photo Gallery and play with the settings of the picture, when I select option 4 x 6 as you, I only get the option for "picture full page. Now when I select the letter or 8x10inches I am then given more options 2-4x6s, 1-8 x 10, 9-wallets and Board contact etc.. So that leads me to believe this is a limitation of the software.

  Have you tried using another photo program to see if this allows you to get you exactly what you want? I open HP Photo Creations on my computer and did the following:

  1. click on the option of high prints

  2. navigate to multiple display prints and select display multiple impressions of grid.

  3. click on customize and print

  4. along the top, you are given the option to choose size, please make sure that the value is 4 x 6. See below

  5. now under the advance printing options, go ahead and select the following settings:

  

  6. you are also able to change the number of pictures you want per sheet, I've now fixed it 2. If you want to only 1 copy of the photo under Copies change this to 1

  7. now you can go ahead and select print (remember under the parameter to select the right printer tray)

  You are now able to print the smaller picture on paper photo 4 x 6 size the correct status bar? I look forward to hearing from you, fingers crossed

• HP Officejet Pro L7590: HP Officejet Pro L7590 printer CANNOT PRINT but can browse the all-in-one software

  I lost connectivity for printing service about a week ago. Maybe it's me trying to add an older HP Cad printer plotter to my selection of printers.  So, based on the recommendations of HP:

  1. I uninstalled all drivers of HP and my pc software (all-in-one)

  2. He unplugged printer HP

  3 - reloaded HP drivers and software on the site of HP (all-in-one).

  4 - connected to the printer.

  I did several times. Together with network using ethernet cable connections as well as direct USB cable to the printer.

  Results:

  1. I can't print all the al.  either through the ethernet connection or via a direct usb cable.

  2 - However, I can scan, fax via the software on my PC HP solution Center

  3 - the printer itself is fine because I can print using the other PCs on my home network.

  So, I tried everthing I can think.  There are configuration, etc. think I cannt understand that my PC keeps me from printing.  Help, please.

  Hi flyfish08,

  Thank you for your answer!

  • Uninstall the software. Uninstalling the printer software.

  • If you are using a USB connection. Unplug the printer USB cable.

  • Clean boot the computer. How to perform a boot in Windows.

  • Disable all Antivirus programs. Disable Antivirus software.

  • Disable all firewall programs. The WF of end-to-end.

  • Create a new user account. Management of user accounts and connections (Windows 10).

  • Connect to the new user account.

  • Reinstall using full feature software and drivers. (Wait for the software to tell you to plug in the USB printer cable).

  Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope that these measures will help!

• HP4660 - cannot print, but pilots recognize the printer and can print test page

  I just installed a HPJ4660 printer.

  From the driver control panel I can choose to print the Test Page and it will display a test page.

  I can print a Diagnostic page as well.

  From Microsoft Word, Mozilla Firefox, or any other program when I select Print, it shows Document waiting in the Document Manager, and then nothing happens. The file prints ever.

  Can anyone help?

  I'm on Windows 7 x 64. The system is a Dell 710H2C, 4 GB of RAM.

  Complete software package is installed.

  Follow these steps and let me know the results.

  1. Unplug the printer from the pc
  2. Click Start, then all programs and open the folder called HP.
  3. Find your printer and you should have the option uninstall Select this option and the uninstall of the printer.
  4. If you have downloaded the software and saved go ahead and launch the software, if you did not save it, then you will need to download the software from HP.com
  5. You just need to run the software it needs to open up and ask you if you want to install, just get out and close the software.
  6. Click the Windows Start icon and you should see a box of files and research programs, in this box type folder it should find the temp folder, go ahead and open it.
  7. What you're looking for, this is a file that begins with 7z, once you find this folder open and you should see a folder with your printer.  Open this repetoire and you should see a util folder, open it and open the ccc folder and you want to look up a batch of Windows called uninstall_l3 file, double-click on this and it will launch a program to uninstall your printer software, let the software complete uninstallation that should lend your PC restart once this done install the patch you have installed earlier (I don't know if uninstalling of) L3 it removes or not) and then install the Windows 7 software for the printer.

• Cannot print - jobs stuck in the queue of the printer

  original title: printer

  Cannot print my document microphone on the preview page before printing

  Specifies the numbers 6 documents how impression on hold
  work? printer is a kodak

  See if Kodak printer support can help you:
  http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=9652&PQ-locale=en_GB

  If no help here, take a look at these tutorials:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1:
  Check the hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows
  Technical problems of Vista and troubleshooting - printing
  http://support.Microsoft.com/ph/11732#tab11

• Why my eclipse cannot print console imformation in the BB project?

  Why my eclipse cannot work?  as 'System.out.println ("error");' cannot print anthing?

  Please tell me the reason .thanks

  the eclipse debugger is not connected to the default Simulator. You must use remote debugging. See the guide to the developer for more information.

• Cannot print pdf.  indicates the pages are not selected when everything is selected or 1-12 is selected.  Why not print it and what has changed since he has always worked in the past?

  Cannot print pdf.  Message says pages are not selected when "all" is selected or when the "pages 1-12" is selected.  Why will it not print what is always in the past?

  Hi donw50735963,

  Please try the steps in the following article: Acrobat and Reader help / troubleshooting PDF printing | Adobe Acrobat, Adobe Reader

  Thank you

  Abhishek

• Cannot print any document of the iMAC

  The only file type that allows to print's email (Gmail account).  When you try to print any type of document from MS Office, PDF, or HTML, the page file is empty.  I restarted my iMac (el Capitan OS) and my printer (Epson XP-400) without change.  Problem just started today (12-16 August).

  Try to reset the printing system by following the instructions to solve problems of printer on your Mac - Apple Support and then reinstall the printer and repeat the test. You can restart in Mode safe after resetting, it deletes some caches.

• Color Laser Jet MFP M176n Pro: Cannot print bar code in the PDF document

  We have just received our Laser Jet printer and tried to print a PDF document that has a barcode in the lower left corner. The document print very well however the barcode area is empty and the numbers under the barcode are printed.

  How can I get the barcode to the printer?

  I thank very much for your guide, we printed the document as an image. My husband tells me that this happens because the primer is not postscript.

• Host of the print driver for 32 bit applications has stopped working (v515w) - cannot print in addition to the test pages

  My printer is Dell v515w Red

  Currently, I can only test pages print.  When I try to print from any other application, I get this error-

  Host of the print driver for 32 bit applications has stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: splwow64.exe

  Application version: 6.1.7600.16385

  Application timestamp: 4a5bd3ca

  Fault Module name: ntdll.dll

  Fault Module Version: 6.1.7600.16559

  Timestamp of Module error: 4ba9b802

  Exception code: c0000710

  Exception offset: 000000000006e3f9

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 1033

  Additional information 1: 3edf

  More information 2: 3edf0feac74021b377b392a0115d74c0

  Additional information 3: bf41

  Additional information 4: bf41409fee27240aa0d3cd0ee9bc9fa9

  I've updated through microsoft and dell and some solutions.

  What is a dell problem or a problem of microsoft?

  My features are-

  Studio Dell XPS 1645, Win7 64 bit, IE8

  extacy1375,

  Unplug the printer.

  Uninstall the printer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download 64-bit Vista drivers and save them on your desktop. Install the drivers for Vista 64 bit in compatibility mode.

  Links to the 64 bit Vista drivers are to...

  Wireless printer Dell V515w All In One Printer - owners (RED) wire

  Rick

• HP LaserJet P1102 cannot print both sides of the paper

  I updated my Windows 8 Windows 8.1 and now I can't print both sides of the paper.

  In my old Windows 8 my printer HP LaserJet P1102 printed the odd sides of the document, then a pop-up window appears and when I click on the 'next' botton and submit the documents to the printer printed the sides of the document. After that the Windows update in the context menu does not appear, so the printer simply prints the odd sides and then nothing happens (just the red flashing on the printer).

  I tried to update the driver (downloaded from your site), but nothing has changed.

  I hope that you can add some useful tips and I can solve this huge problem.

  Thank you!

  Hello

  I understand that you can print is more on both sides.

  When the light flashes try and open and close the lid to see if continues to print.

  (there is no button for the printer but which will resume print jobs)

  I would do a complete uninstall and reinstall the printer software to see if that makes a difference.
  You can download the drivers from this url.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=4110396&

  Win8 and Win8.1 drivers are the same Version9.0.

  If you need more simply make assistance let me know.

  Please let me know if the printer is connected by usb or the installer on a wireless network.