Cannot print on my local printer when you use remote desktop to access the server (Server 2008).

Similar Questions

• Mouse Bluetooth stops working when you use Remote Desktop

  Hello, I have a Dell i7 using Windows 8 and a comfort Sculpt bluetooth mouse.  The two work together well, but when I use remote desktop, the mouse stops working.  I have checked the logs of windows, but don't see anything apparent that would explain the bluetooth mouse to stop working with RDP.  Is this a known issue?  And is there a known solution?

  Hi Sharief, thanks for the quick response!  I think that I could find my own solution to the problem.  I ended up remove the bluetooth driver that came with my Dell laptop and allowed the Microsoft Generic bluetooth driver to take charge.  The mouse now works like a charm, especially when I am using RDP.   I did have a problem again on the generic driver.  Thanks again!

• Take screenshots when you use Remote Desktop Store app

  How this is done?

  This is because the Remote Desktop app captures the key windows as a Windows key on the remote computer. Therefore impossible to use the Windows key the Surface to take screenshots at the Remote Desktop application.

  As a work-around, what I do is put another app on the side of my application of RD and then clicking on in the application, so this is the active application. Now, when you press the Windows key and the low volume button, it will take a screenshot of the entire screen which will include both the remote screen. Then you can crop the App on the side if you wish.

  It is a workaround, but at least it allows you to take a screenshot. Just be sure to resize your remote desktop screen when multitasking and no multitasking so that you get the maximum image.

  Another option is to shoot to the top of the keyboard to the screen (in all Apps > accessibility of Windows), you can then move the keyboard of the road so that it takes as little as possible of the screen and still allow you to push the print screen on it button. Once it is low, you can paste the image that has been save to your Clipboard as you would when you take a screenshot in Windows.

• Sound when you use remote desktop...

  Hi all.  I am glad that I found this forum.  In any case, I was FINALLY able to connect to my desktop, Windows XP Pro, using remote desktop, since my laptop Vista Home Premium, but I can't get sound from my desktop for work.  This was the reason why I wanted to log in because my office has an impressive system of 5.1 speakers and we ALL know what kind of sound, a laptop... lol.  I want to be able to play music on the desk while I work on the laptop. I get the sound through the laptop here, but I can't figure out how to have the opposite effect.  I noticed on the office, he says he uses the audio device of RDP and I even tried accepts for the Realtek device but nothing helped.

  Is it possible that I can hear my music on my desktop?

  Please, it would be SO awesome!

  Thanking you in advance,
  Karen

  Ok. Open the desktop connection remote [DRC] on your mobile client DRC and select Options > local resources. Configure the remote computer to allow for the remote computer.

  Depending on which version of the client DRC the wording may be slightly different. In the distant past of the people also reported need to launch audio player function, IE. Media Player for example, on the DRC host PC before connecting to her customer's DRC PC/computer laptop. MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• Is it possible to change the font size or screen resolution when you use Remote Desktop

  We use mstsc to connect to our Windows 2008 R2 server. Not everyone uses the same font size and screen resolution. No way to change this on an individual basis? We all get the message that "display settings is not editable in a remote session.

  Thank you

  Anne

  Hi AnneWallace,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums to get help:

  TechNet Windows Server general forums

• Code error 8024002d when you use Windows Update to install the update of security for Director 2.6 for windows vista

  I get the error code 8024002d message when you use Windows Update to install the update of security for Director 2.6 for windows vista. It try to install then a window pops up saying: he cannot locate a file called "MM26_ENU [1] .msi '. I have serached my PC and no such file exisits. Grateful for any help. This is supposed to be an update of important safety for Movie Maker.

  Alan McC
  Do you have other accounts of users on this PC?  If you install this update from the main account?

  You should get the number of the update of the updated history list and then download the file here: Microsoft downloads.
  If sure that nothing else is running, and then install the update manually.  Give it a try and let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What event will be triggered when you use your finger to scroll the screen?

  I want to do the scrolling list, now I can do this by using the mouse to drag, but how do I apply it by using your finger to scroll?

  The question is that I don't know when you use your finger to scroll the screen, what event will trigger?

  Please help me if there is no solution?

  You can use the same code as the mouse. Mouse events are also triggered when you use a finger on a touch screen. However, if you want more features, for, etc. example pinching to the zoom, you'll have to watch the TouchEvent class.

  App playbook: Car accident 

• Correct way to use Bind variables when you use an interface to MS SQL Server

  Hey,.
  I have some difficulty to find how to use bind variables in a view, when you use an interface to MS SQL Server. For some reason when I use an ApplicationModule who has a library of MS SQL Server JDBC loaded and I try to click on OK when you change the following query:
  
  SELECT kit_status, component_id
  OF numbered_inv
  WHERE trialname =: 1
  
  I get an error stating that ' SQL Query Error Message incorrect syntax near ':'. JDeveloper is compatible with SQL server for bind variable as this query works fine if I replace the: 1 with a Word to say "Test test".
  
  Thanks in advance
  
  Edited by: NullCheck December 15, 2010 14:06

  Use positional JDBC Style Binding to bind variables
  Try to use? Instead of:
  As shown here:
  http://www.Oracle.com/technetwork/developer-tools/jdev/multidatabaseapp-085183.html

• HBR error thrown when you use @NEXTSIBLING or @SHIFTSIBLING in the HOTFIX

  Hello
  
  I'm working on a HBR that works very well, when you use the following code:
  SET CREATENONMISSINGBLK
  + FIX ("BegBalance", [KHSA_PLAN2_ACCOUNT], [KHSA_PLAN2_CUSTOM3], [KHSA_PLAN2_CUSTOM4], "E-00000", "FY10", "Budget", "Robocza", [KHSA_PLAN2_CURRENCY], HSP_InputValue) +.
  FIX (T4)
  
  + "C2-00000" = 2; +
  ENDFIX
  ENDFIX
  
  Now, I would use the @NEXTSIBLING or the @SHIFTSIBLING in the second statement to FIX, so the BR code looks like this:
  
  SET CREATENONMISSINGBLK
  + FIX ("BegBalance", [KHSA_PLAN2_ACCOUNT], [KHSA_PLAN2_CUSTOM3], [KHSA_PLAN2_CUSTOM4], "E-00000", "FY10", "Budget", "Robocza", [KHSA_PLAN2_CURRENCY], HSP_InputValue) +.
  FIX (@NEXTSIBLING (T4))
  
  + "C2-00000" = 2; +
  ENDFIX
  ENDFIX
  
  During the launch, the HBR throws an error: detail: cannot calculate. Essbase Error (1200315): the formula (line 3) [statement of DIFFICULTY] parse error: invalid object type
  
  I'm missing something, I'm not?
  
  Thanks for the help, regards
  Marcin Stawny

  I think you should change the string referring to a member with @MEMBER @NEXTSIBLING name.

  Something like:
  FIX (@MEMBER (@NEXTSIBLING (T4)))

  Copy the following code that is valid as a calc script and goes against my very favorite Essbase Database in The wide world whole:
  FIX (@MEMBER (@NEXTSIBLING("200-20")))
  'Sales' = 'Dirty' + 1;
  ENDFIX

  Kind regards

  Cameron Lackpour

• Quick question on network printing when you use e3000 in cascade mode

  HELO there! I'm new to the community and would be very happy if someone can help me please with a small question I have?

  I just got Verizon FiOs in my house and still have my old Linksys e3000 router. I was reading online that it is possible to configure as an another access point wireless or cascade to expand my wifi. However, I am in a pinch of becaue I have I used to print wireless from my laptop. My printers are connected by ethernet to my router. I don't know if I can make the LAN - LAN configuration so I was looking at the LAN - WAN configuration procedure, but he said something on that there are separate networks (2) instead of (1) if I like that. I'm unable to connect a wire from my Verizon for the Linksys router.

  So my question is, if I do LAN - WAN configuration cascading, I would be still able to print from my printers if they are always connected to the e3000 if I am connected to the main network? Or if I should move to the other network before printing?

  I apologize if my question makes no sense - I don't have a lot of experience with routers or the words with her.

  I would be very happy if someone could help me. Thank you!

  I followed this guide - http://www.linksys.com/ca/support-article?articleNum=132275

  Cascading E3000 LAN to LAN works perfectly with the existing configuration of the printer.

  In waterfall or connect a Linksys router to another router

  Things to keep in mind when cascading a second router:

  1. Change the IP address of the secondary router to something like 192.168.1.254 so its on the same network, but is not in conflict with the main router
  2. Make sure that the DHCP service is disabled on the secondary router
  3. Make sure that nothing is ever connected to the Internet port on the secondary router

• OfficeJet pro 8600 vertical black lines printing when you use the scanner/copier of SMA

  I have an Officejet Pro 8600 Plus model N911g that I got a year out of warranty. Worked perfectly until this week when I scanned approximately 50 pages through the ADM.  During the process of digitisation of the black vertical lines began to appear on documents that are scanned or print (color or BW) through the ADM.  Scanning or printing directly from the scanner glass is not the problem.

  I checked, cleaned and cleaned all (rolls, strip scanning, scanning glass) it is possible via the information provide in these forums from other veins knows on their production lines.  No change...

  I unplugged the printer all the network and fax cables and tried scanning or copying with the power of the device, NO CHANGE.  Don't know what the next step might be other than the factory reset (don't have documentation on this process).  Additional suggestions would be appreciated.

  Bcrigler

  Hello

  Please go through this document from HP, this problem is because of the dust or some contamination on glass scalled

  http://support.HP.com/us-en/document/c02881567

  Here is a video, the printer is not JO 8600 but the mechanism is the same, then even this video will be a great help

  http://www.YouTube.com/watch?v=CGn7FJvH8sE

• "Cannot be activated" error is emitted when you use a Workflow - OAM 10.1.4.3

  Hello
  We have implemented the management of password according to http://download.oracle.com/docs/cd/E15217_01/ doc.1014 /e12489/idconfig.htm#CBDGGGHE and notes 444094.1 . We try to create a user through IdentityXML using the basic user workflow create that we created, but it fails. So we tried to create a user in Identity Manager from the link to create the user identity. We receive: initiated - finished, Enable - failed. We see http://download.oracle.com/docs/cd/E12530_01/oam.1014/b32419/trblsht.htm#BABBAEAH statement about the searchbase, but he seems OK with our domain name and any authorized person. Anyone have any other ideas what could be the problem, or a way to solve this?
  
  Thanks for your help

  As the link to the documentation pointed out - the ' enable - failed ' could be for various reasons such as licences in directory attributes, not provided necessary etc etc. The final place to look for what's not in the logs from the server identity - you can lower the threshold to DEBUG3 to get more detailed logs.

  -Vinod

• When you use Windows Explorer to view the files and folders, the thumbnails of image files appear briefly then are replaced with the default icon of the image file. I tried the answers to similar problems, but none worked.

  Browse the folders with image files, I cannot see the thumbnail icons for images correctly.  I know, it should be possible, but I can't do it.

  When I first open a folder in Explorer, I see the correct images for a fraction of a second, then all images are replaced by the thumbnail of the image file (which looks like part of a digital SLR).
  I put all folders to display picture to display the preview and the filter, and the "always show icons never thumbnails" is not checked.  Display file icon "on the photos' is unchecked (I tried checking, too, without change).  I also deleted the thumbnails using disk cleanup as suggested on another question, but which did not allow them.
  The result is that, if I want to open an image for editing or downloading, I have to use a third-party application (for example, Pentax Photo Browser) to preview images, and then return to the Explorer window to select the correct file by name. Don't try to difficulty of these things that are not broken.

  izzlecrate,
  You might want to try it and I just did this procedure myself a moment ago and surprising, it worked!  First of all I must tell you that I have Windows Vista, but the information I got was for Windows 7 and it worked.

  First: You must create a NEW FOLDER and put it on your desktop.
  Second: Move or copy the contents of the original file in the NEW FOLDER on the desktop. I copied the content, just in case something went wrong.
  Third: After that is finished and all the contents are inside you.
  Fourth: On the desktop right click on the folder and click Properties at the bottom of the box.
  Fifth: Click Customize tab at the top and then the Middle click on DEFAULT settings for the folder.  Click on apply to, click OK and your done

  NOW! You can move the folder wherever you want by drag-and - drop the folder and when it's done and that's the best part, you should see the thumbnails of the folder on the EDGE of the folder that you just created.  It worked for me and I hope it works for you.
  I have 10 years of experience with my computer and have troubleshooted my friends for viruses and other computer problems successfully.  I'm advanced computer user.

  That this is done, it restores the folder its original settings.  Good luck! Rick

• When you use a blank CD in the CD drive and try to open it to put the files, it is written "Please insert a disk in the drive."

  Original title: windows 7

  CD drive reads CD when there is something on it but not read a blank CD. When I put a blank CD in the CD drive and try to open it to put the files it contains, it says please insert a disk in the drive.

  Movido al foro EN - U.S. / /.

  Hi Robert,.

  Thanks for the screenshot of your system information.

  As you can see in the screenshot, on the right side, the Description indicates that this is a CD-ROM drive, it means that it's a player-CD (Read Only Memory) which can only read the discs, but cannot write data to the disk. You may need to replace it with a CD/DVD burner drive for read/write drives.

  Hope this information is useful. If you have any additional questions on the issue, please post back, we will be happy to help you.

• thinapps does not start when you use a VPN gateway access

  Hello

  We have a test lab that we use for demo/test Horizon Workspace.  When we use a Windows 7 VM inside the field of local laboratory which the vApps Horizon are on, all the features - including ThinApps - works fine.  However, when we VPN for the lab and try to launch a Thinapp of Horizon, seems to fail. No error message - just thinapp does not launch.

  I have attached the diagnosis local Horizon of my phone files that I used to try to launch Thinpps all in VPNed in, if someone could help me I would be really grateful.  Thank you.

  -Allen

  Today there is no real solution for this. If you want to manage ThinApps clients must be in the same domain as the ThinApp/workspace repository.