Cannot read dvd, says that a compatible decoder is installed

Similar Questions

• Windows media player error c00d1163 cannot read dvd

  error cood1163 cannot read dvd, says problem with copy protection with video from the dvd player and decoder card. recent problem was working before

  Please create a new thread for assistance. Don't forget to provide the exact problem in as much detail as possible, as well as all the error messages in their entirety and any other information that may be useful.

• Portable Satellite 1800-750 cannot read DVDs that require files avi (codec)

  my laptop satellite S1800-750 cannot read DVDs that require avi (codec) files. l have updated dvd drivers and upgrades of my multimedia player of series 10, but nothing helped. I need emergency aid.

  Hello

  I suggest, that it can not ONLY play .avi files. Am I wrong?
  In this case, you need additional codecs.
  This has nothing to do with the DVD drivers or firmware.
  Check the internet for the codec. I'm sure you will find a lot of info if you want to google a bit.

  Good luck

• My DVD has stopped working "cannot read DVDs Please decrease the current resolution.

  Original title: DVD

  My DVD has stopped working - error that says: cannot read DVDs Please decrease the current resolution and ensure that the connection of display type is taken care... Help!

  Hello

   
  What program you're using to play the DVD? Mention the name of the program?
   
  Try to play the DVD with Windows Media Player , and let me know if you get an error message.
  Play a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player
   
  Response with more information to help you.

• my window 7 cannot open my program that is compatible with windows XP, windows 98 etc.,.

  my window 7 cannot open my program that is compatible with windows XP, windows 98 etc.,.

  Right-click on the EXE and select Properties, then select the compatibility mode.  Also if you have Pro 7 or higher, you can try the windows xp mode.

• Does not update CS5 Production Premium, re-installed on the new PC (Windows 8.1). Cannot read Canon CR2 files.  I have re-installed.  What's wrong?

  Does not update CS5 Production Premium, re-installed on the new PC (Windows 8.1). Cannot read Canon CR2 files.  I have re-installed.  What's wrong?

  Jeff, thank you.  I couldn't update any program in CS5.  It turned out that I had to do a 'update manual".  Not sure why it was different, but it worked.

• Network controller is not properly understood, impossible to download anything, the diagnostic report saying that there is no driver installed for this device

  Original title:. network controller error?

  the device, network controller, is not understood correctly. report "tv_ConfigMgrErr1". Impossible to download whatever it is or it causes Internet Explore stops working. I get a diagnostic report saying that there is no driver installed for this device. It was working fine yesterday and then around 05:45, my computer made automatic updates and it was after that when I tried to download a game for my grandson and started to get in trouble. I'm no computer expert so I don't have any idea what to do.

  Hello

  1. you are using an internet connection wired or wireless?

  2. What is the exact error message you get when you try to download?

  3. what happens when you try to download the game?

  4. What were the updates that were installed yesterday on your computer?

  Check out the following link.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Method 1:

  You can see the following link.

  Solve the problem of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  See also:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2:

  You see the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  http://support.Microsoft.com/kb/936211

  Method 3:

  I suggest you uninstall and reinstall the network card and check. Follow the steps.

  (a) click Start and type devmgmt.msc and press ENTER.

  (b) find the network card and expand it.

  (c) right click on the Uninstall adapter selection.

  (d) restart the computer.

  Windows should install the necessary drivers.

  You can now try to install the latest driver on the manufacturing site.
  Check out the following link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• I can not install Illustrator, they ask me to change the direction of the application, but he always says that it can not be installed in the root directory. What can I do?

  I can not install Illustrator, they ask me to change the direction of the application, but he always says that it can not be installed in the root directory. What can I do?

  Hi alexisp25256377,

  Please mention the exact error message that you found when installing Illustrator and here are the steps that you can follow to change the installation location.

  1. go to preferences using the gear on creative cloud icon

  2. go in creative menu Cloud

  3. do Apps and then change the installation location to another directory.

• I downloaded the Adobe Pro 9 Setup program on a new mac and it says that it can not be installed because it comes from an unidentified developer. I have a serial number and want to just 9 Pro on my new machine

  I downloaded the Adobe Pro 9 Setup program on a new mac and it says that it can not be installed because it comes from an unidentified developer. I have a serial number and want to just 9 Pro on my new machine

  How to open third-party applications to developers not identified in Mac OS X "Mac tips.

• I am trying to install CS5 on my iMac, after my computer crashed. I get a message saying that the software is already installed and will not install again. How can I install it again?

  I am trying to install CS5 on my iMac, after my computer crashed. I get a message saying that the software is already installed and will not install again. How can I install it again?

  Hi Marleneb3511919,

  I'm sorry for the inconvenience caused to you.

  I guess you tried rebooting your system?  If so, and the problem persists please try the steps listed in this document https://discussions.apple.com/thread/240851?start=0&tstart=0

  Please let us know if this goes through.

  Kind regards

  Aurélie hamadi

• Cannot read DVDs, error: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer

  DVD playback problem started today.  SE message: Windows Media Player cannot play the DVD because no compatible DVD decoder is installed on your computer ot.  I have not had this problem before.

  Hi RosemaryHanna,

  Thanks for posting in the Microsoft community!

  I understand that you are unable to read the DVD. I will try to help you with this question.

  (1) did you make any changes before the show?

  (2) the video works fine when playing any video recorded or audio files on the computer?

  Method 1: Solve the video issues in Windows Media Player and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/?WA=wsignin1.0

  Method 2: You can see the steps mentioned in the article below

  Supported decoders MPEG - 2 software DVD in Windows Media Player for Windows XP and Windows Vista

  http://support.Microsoft.com/kb/306331

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Cannot read DVD or CD error: "Windows Media Player cannot play this DVD because no compatible DVD decoder is not installed on your computer.

  Original title: I CANNOT READ THE DVD OR CD ON MEDIA PLAYER, IT is A what NO NOISE 'n' INSTALLED EITHER ALL THE IDEAS THAT DO?

  I HAVE PROBLEMS WITH THE PLAYER ON MY LAPTOP, I JUST GOT ALL OF THE DELETED CONTENT SO THAT IT IS FIXED AND I AM UNABLE TO PLAY DVDS OR GET ANY SOUND MEDIA PLAYER WHEN I ENTERED A DVD THE MESSAGE READ:

  "Windows Media Player cannot play this DVD because no compatible DVD decoder is not installed on your computer."

  ANY IDEAS PEOPLE? I THINK I NEED TO REINSTALL THE SOUND AND EVERYTHING BUT DON'T HAVE ANY IDEA OF THAT KIND OF THING OR WHERE TO GET IT FROM :( ANY HELP WOULD BE GREATLY APPRECIATED.

  Hi SARAH-82.

  The sound works fine when playing any video recorded or audio files on the computer?

  Method 1: You may need to download the audio effect plug-ins or ability of DVD in Windows Media Player, please visit the link below

  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Method 2: You can see the steps mentioned in the article below

  Supported decoders MPEG - 2 software DVD in Windows Media Player for Windows XP and Windows Vista

  http://support.Microsoft.com/kb/306331

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 3: To the problem of audio or audio playback, you can follow the steps mentioned in the link
  Tips for solving common audio problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• Why my laptop used more read the DVD. says I have no decoder?

  When I first got this laptop (vista) it played DVD, now it does not work.  Says I need a decoder

  Hi, Chris,.

  Do with Roxio and Cyberlink software?

  Did you uninstall software recently?

  To check if the DVD decoding software is installed, right click on command prompt and select run as administrator

  Type the following: dvdupgrd / detect

  Press enter

  You should see a message with the software brand

  Resolution of the problems of reading

  http://Player.InterActual.com/help/support/articles/0137.asp

  How long it lasts?

  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

• Different geographical region cannot read DVD

  Why if I always buy a disc of DVD (Korean film) WMP says that "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. »

  Anyone can solve my problem?

  See http://www.ehow.com/how_6226370_change-region-windows-media-player.html

  Important: The region can change only a limited number of times. When changes remaining equals 1, and then select a new region, an alert is displayed to warn you that after this, you only will be able to play DVDs from that region, even if you reinstall Windows or move the DVD drive to another computer.  Be aware that you will not be able to change the region setting for some DVD hardware and software decoders.

  See also http://ice.he.net/~hedden/DVD_video_standards.html

• Satellite Pro A40: CD-RW/DVD drive cannot read DVD

  Hello

  The reader combo CD-RW/DVD on my Satellite Pro A40 (14 months) stopped reading DVDs (DVD - R or the video, have not tried other types), although it can play DVDs some time. I've cleaned the disc by using a cleaning disc. I think the problem started when I upgraded the OS to WinXP SP1 to SP2, but not sure. I tried CD - R and CD - RW writing and no errors were reported, but the CD that result are unusable (can't be read in the drive, with the LED blinks a few times and then to infinity).

  Someone has an idea how solve this ptoblem? Thank you

  Richard

  Hi Richard,

  I suggest that you go the Device Manager on your laptop and then remove your devive DVD-ROM in the list. When you have done this and then select the option "Find new hardware" and allow Windows XP Reinstall the device and associate the appropriate driver.

  HTH