Cannot remove cover memory! Satellite Pro A100

Similar Questions

• Satellite A100 - how to remove the Memory Stick Pro DUO card slot

  Hey,.

  I really need help with how to remove my Memory Stick Pro DUO card slot.

  The laptop read the stick very well and I can see all the files into it but I can't seem to get out. I tried to push a little to get out, but it does not work and it's also pretty far in so I can't get out.

  Anyone have any ideas?

  Thank you

  Hello

  To my knowledge there is no extra help for Memory Stick Pro DUO removing as on the PCMCIA port.
  You should try to get him out. If you n t manage to pull him out with you fingers, you can use a pair of tweezers.
  But be careful.

• Satellite Pro A100-81: memory Pro Duo card is stuck in the card reader

  I am the proud owner of a Satellite Pro A100-81. I inserted a Duo Pro Memstick into the slot of the card reader...

  The card slipped too deeply into the slot so that I unfortunately can't remove the card more.
  Any ideas how to remove the card?

  Hi Gary

  Are you sure that the laptop computer s card reader supports memory stick Pro Duo?
  It s unusual who supported cards will slip to deep into the slot, something as may occur if the card is not taken in charge and is not compatible with the slot

  However, you shouldn't t do anything hard disk average if you n t know how remove it ask someone to help him with more experience for laptop

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye

• Satellite Pro A100 - 4 GB memory motherboard?

  I have this model of Board of Directors: V000068460 there a docking port/blue graphics capabilities of the tooth/footprint/microphone/infra-red/external and pci-e connector for the wi - fi accepts cards pci-e dual use, but the system memory is limited to 3 GB because of the revision of the chipset.

  So no one knows of a compatible Board that offers the same options (infra-red is optional) but has a later chipset revision so that the memory can use 4 GB or almost 4 GB of ram?

  Hello

  As far as I know the Toshiba Satellite Pro A100-196 PSAACE-001009AR supports 4 GB of RAM.

  Google a little bit and found out that the Council V000068140 is compatible for Satellite Pro A100-196

  Hope this helps

• Satellite Pro A100-830 with 4 GB of memory but the BIOS tells me that I have only 3 GB

  I have a Satellite Pro A100-830 and I bought the maximum memory for what is 2x2gb, for a total of 4 GB in my world. When I put the DIMMs in themselves in a slot, the BIOS reports 2 GB. BIOS Bravo! When I put both together, I see only 3 GB in the bios!

  I found this link on the Crucial site. http://www.crucial.com/kb/answer.asp?QID=4251

  Suggest page files, peripherals etc. occupy memory on your system at startup, before the operating system is used I guess. If you do not have the maximum memory installed, you should see the total memory. If you got the maximum memory installed, you will not see the memory used by page etc. files. Why would it be? Why you would see 2 GB if you have only 2 GB but then see 3 GB if you have 4 GB due to the system!

  Anyone can shed some light on this subject and be eligible or reject the information in this link. I need to replace the memory and/or the pc?

  Thank you

  Mark

  This is not a BIOS problem but a Windows.
  I found this info:
  Windows XP Professional 32-bit is limited to 4 GB of address space. If you have 4 GB of RAM installed, it won't show 4 GB in Windows. You will probably get what the size of your pagefile subtracted the 4 GB.

  Some of this address space is reserved for the hardware and the operating system... so you will never have access to the 4 GB maximum in any case. If you want access to 4 GB of RAM +... your best solution is to pick up XP Pro 64 - bit... but this will only work if your CPU P4 has EMT64. (64-bit)
  You can also try to turn on DEP if it is not already enabled... This will also allow EAP that can give you access to all 4 GB

  So finally a response:
  > Do I need to replace the memory and/or the pc
  -> No, everything is ok... you need not to change the hardware

• Satellite Pro A100-828 has an interface 64-bit on X 1600 GPU memory?

  Hello

  Satellite Pro A100-828 has an interface 64-bit on X 1600 GPU memory? Please help I get only 2500 points on 3dMark05 on a Satellite Pro A100-828. The GPU is X 1600 with memory dedicated 128 MB + 384 MB Hypermemory. This card should be approximately 3500 brands.

  Thank you

  Shahid

  I studied in the World Wide Web, and it seems that the X 1600 supports a 128-bit interface
  I not found any x 1600 with 64 bit so I think that it s a 128 bit

• Satellite Pro A100 - 828 Max memory speed

  Hello

  Can someone please tell me the max speed of memory for Satellite Pro A100-828, I'm wanting to move to the 4 GB maximum but is some sites say the maximum speed is 533 MHz while others say to 667 MHz. For example, the Toshiba site lists only memory 533 MHz under the "Compatible" Options yet other sites list 667 MHz memory as compatible.

  Thanks for your help.

  Hello

  You should check which bus (FSB) front would support.
  Install the hardware diagnostic tool like Everest home edition, and you should be able to find this value.

  If your chipset would support 667 Mhz then you can use these modules and the modules would go with 667 Mhz too.

• Satellite Pro A100 - cannot update driver ATI

  Hello!

  I have a problem with my graphics ATI Mobility Radeon x 1600 card card. I can't update to the latest driver from the ATI. The program says that it can not install on my system - contact company for the most recent driver. But the one that is provided by Toshiba is almost two years!
  It all started with, that I could not run FIFA 2009... even if it clearly States in EA own manual that this graphics card is supported! But I do not see everything in the game - except the players. Only their shadows are visible...

  I know it's a lot, but I'm pulling the hair here!

  HEEELP!

  BTW: my system: Toshiba Satellite Pro A100-PSAACE - Core2Duo 2.0 GHz, 3 GB RAM, 120 GB of HARD drive Windows XP Pro.

  I really wonder that many people do not understand why the laptop manufacturers don't offer drivers for graphics cards so often.
  Each laptop manufacturer deals with design, hardware components and drivers used for the operation of the equipment. On laptops, hardware components are miniaturized and placed close to each other. This means that the heat and is a common problem for the designers of the laptop.

  Each computer laptop (hardware, drivers, BIOS, cooling system) is designed to operate in optimal conditions. If you want the new driver that can force a graphics card to run on the maximum limit, the result will be more heat. More heat means more risk for damaging hardware and overheating.

  So to laptops, there are limits that must and should be respected. Graphics card manufacturers cannot just offer new drivers for laptops and be responsible for the damage. When some owner of the laptop is damage graphics card because of the driver who should be responsible? ATI or Toshiba?

  For this reason, graphics card manufacturers say clearly: If you want the new driver laptop computer contact the manufacturer. Manufacturers must also protect the customer s of material and be careful with this stuff.

  So I think you see how it works and the display driver update will be probably endless discussion on each laptop computers forum.

  Good luck!

• Where to find bars of memory 2 GB for Satellite Pro A100

  According to the Toshiba site, the A100 has 2 memory slots for up to 2 GB per slot, but I can only find 1 GB max cards. Anyone know where I can find 2 GB cards?

  With the card, you mean the memory modules?

  You Satellite Pro A100 must be a unit of PSAACE-xxxx series because AFAIK other A100 Pro supports only 2 GB of memory.

  In any case, someone posted a useful link to the site to upgrade memory. I found this:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=26257&ft=m&St=3

  I chose the ProA100-828 because I put t know what exactly your unit.
  However, there is a 2 GB module shown.

  By the way: 200 pin DDR2-533 SODIMM modules are compatible!

• Satellite Pro A100-229 - Incompatible of CRUCIAL memory

  Hello friends,

  Just bought memory upgrade for my Satellite Pro A100-229 in Crucial.com but these modules do not work in my laptop?

  Details of the product is:-_ * CT12864AC667.8FG (1 GB SODIMM DDR2 200PIN 128 M x 64 PC2-5300 * _).

  Does anyone know what memory modules will work in my Satellite Pro series please?

  Or y at - it anyway I can make these modules work please?

  Thank you very much.

  Hello

  If the modules are not compatible so you won't get work
  I think you should check some Kingston modules: * DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM *.

  I ve bought some Kingoston modules and they are working properly.

• Satellite Pro A100 - cannot install display driver

  I am updating a Satellite Pro A100.
  I downloaded the update of the display driver but can't install it because it say its longer 88 charicters.

  Anyone has any ideas, tips or suggestions please?
  My goal is to alow the user to be able to play Sims 2 if it is possibe, because I know that some video cards do not support the game (or whatever it is).

  Hello

  I assume that you have downloaded the zip package.
  Rename the package for example in "display driver" and then uncompress the package.
  Then go to the folder where the driver was decompressed and then launch the installation.

  Can you do this?

• Cannot use wireless LAN with my Satellite Pro A100

  Toshiba Satellite Pro A100-830
  NETGEAR DG834G

  Can not use the Wi - Fi connection. When you use "Free Config" to find peripheral wireless the popup "this connection is controlled by other software. I don't know what that means and what software controls the connection. I have other laptop which is duly connected by wireless. I'm ok with wired connection.

  I don't know much about the technical aspects and therefore ask for help so any reader can.
  Thank you
  Kris

  > Can't use the Wi - Fi connection. When you use "Free Config" to find peripheral wireless the popup "this connection is controlled by other software.

  You may not use the ConfigFree for configuring Wlan but own Vista configuration options or the WLan configuration tool like Atheros Clint Utility or Intel ProSet utility. It depends on the WLan card which utility can be used.
  Card Intel-> Intel ProSet utility; Card Atheros WLan-> Atheros Clint Utility

  I guess the message + this connection is controlled by other software + appears because one of the above options controls the WLan.

• Norton Ghost crushes on Satellite Pro A100

  Good afternoon everyone,

  I'm having a problem with a few laptops I have here. I just got a few Satellite Pro A100 but I have problems with making an image of the HARD disk. I tried Norton Ghost and a few other programs that can back up a disk to an image, but none of them worked. For some reason, they all crash when they are tryig to get started.

  I tried it on 3 different PC laptops and failed each time, exactly at the same place. I guess it has something to do with how these programs manage the memory.

  If someone has had this problem before and have you found a solution for this?

  Hello

  I doubt that the problem is something serious. But I can say that your best bet is to bring to an authorized service provider. The hard drive under sometimes is used to disconnect after a bit of work. But this isn't anything you can do to fix it. You must take it to a repair shop and ask them to look at. The reason that Norton blocked is because it cannot read the disk hard because she is not completely connected. I would like to know how this happens. And one last thing, if you want to turn the laptop and to take cover in the lower right and see if the hard drive is seated properly and firmly. Then try to use the ghost.

• Satellite Pro A100 - card reader no longer works

  Hello

  I have a Satellite Pro A100 - PSAACE-008002EN, that I bought a month ago, its worked perfectly so far and has been fantastic to use.

  The main part that I use is the memory located on the front card reader, I have used it with SD, MMC and cards XD for my pda and cameras, until now, it worked well, but recently, I was music transfer etc for my Sony PSP Memory Stick using a Memorystick Pro Duo Pro adapter so that the card fits properly in the slot and it works very well.

  All of a sudden the laptop can no more read on my MS card, I tried the card in a usb card reader and it works perfectly with or without the adapter. The laptop card reader reads cards SD MMC and XD, still perfectly fine but when I framed my memorystick, it shows the stick as being there in my computer, but when I click on the dialog box appears and says that there is no disc?

  I tried to install the latest drivers but it does not work, any help is appreciated

  Thank you very much

  Rich

  I found this information and first of all, I want to put a list of supported cards:

  SD (support of multiple Digital Media Card slot) capacity 8MB - 2GB
  Memory Stick (supported by several Digital Media Card slot) capacity 8 to 256 MB
  photo 16-1 GB xD card
  Memory Stick 8 to 256 MB
  Memory Stick Pro 256 MB to 2 GB
  MultiMediaCard 8 MB - 1 GB

  According to this list, the Memory Stick Pro Duo is not supported. But you used an adapter.
  But maybe this is a reason why the card reader cannot read the MS cards more.

  What you can do is to remove the card from the Device Manager reader, and after new restart try to install this new device