Satellite Pro A100 - 828 Max memory speed

Similar Questions

• Satellite Pro A100-828 has an interface 64-bit on X 1600 GPU memory?

  Hello

  Satellite Pro A100-828 has an interface 64-bit on X 1600 GPU memory? Please help I get only 2500 points on 3dMark05 on a Satellite Pro A100-828. The GPU is X 1600 with memory dedicated 128 MB + 384 MB Hypermemory. This card should be approximately 3500 brands.

  Thank you

  Shahid

  I studied in the World Wide Web, and it seems that the X 1600 supports a 128-bit interface
  I not found any x 1600 with 64 bit so I think that it s a 128 bit

• Satellite Pro A100-828 refuses to connect to the internet with modem MDA Vario 2

  I have an Equium A60 which I use regularly as a modem for mobile internet access. Still, it connects to my MDA VARIO 2 (HTC Tytn) and gives quick access.
  However I just bought a Satellite pro a100-828 who, for some reason, refuses to connect to the internet through this phone.

  T-mobile want nothing to do with the problem and that it is a conflict between the phone and the bluetooth stack Toshiba. The phone has always look like that is going to connect and then to computer recording connected to the screen network switches the modem feature phone.

  As you can guess I'm sitting at the old equium typing this so if anyone can shed some light on this I would be very happy?

  I tried to uninstall the bluetooth stack.

  The fact that your old Equium was connected via BT to this modem?
  Perhaps a Bluetooth stack of new version of battery BT facility allows or you can try to use the same version of BT stack that is installed on the old notebook

• Satellite Pro A100-828: Need drivers Toshiba Umbuntu Linux

  I have the toshiba satellite pro A100-828.
  Ubuntu feisty fawn works wery well but best I need display driver for my laptop.
  I want to use beryl, or Combiz desktop.

  Ubuntu will now display the X server at startup of system crash when I installed the ati linux driver.

  the output of

  Cat /var/log/Xorg.0.log | tail

  could be interesting.

• Satellite Pro A100 - 4 GB memory motherboard?

  I have this model of Board of Directors: V000068460 there a docking port/blue graphics capabilities of the tooth/footprint/microphone/infra-red/external and pci-e connector for the wi - fi accepts cards pci-e dual use, but the system memory is limited to 3 GB because of the revision of the chipset.

  So no one knows of a compatible Board that offers the same options (infra-red is optional) but has a later chipset revision so that the memory can use 4 GB or almost 4 GB of ram?

  Hello

  As far as I know the Toshiba Satellite Pro A100-196 PSAACE-001009AR supports 4 GB of RAM.

  Google a little bit and found out that the Council V000068140 is compatible for Satellite Pro A100-196

  Hope this helps

• Bluetooth is not recognized on Satellite Pro A100

  I have a Satellite Pro A100 828 running Win XP Pro.

  He is supposed to have integrated bluetooth but when I install the bluetooth stack, a message appears saying peripheral usb has malfunctioned and is not recognized by windows.

  In Device Manager, it is listed as an unknown device.
  I tried different versions of the bluetooth stack, but the same message still appears.

  Is there a software fix for this or does this mean that my hardware is defective? Would be grateful for any advice.

  Thank you.

  Hello

  where downloaded battery Bluetooth? And another question: do you have bluetooth never work properly? It would be interesting.
  Try another might be to download a Linux Live-CD and to check if the problem is perhaps more a hardware related issue.

  So, if you need an alternative download source then try this address:

  http://209.167.114.38/support/download/ln_byModel.asp

  Greetings

• Satellite Pro A100 - how to activate the shortcut keyboard-support on Vista?

  Hello. I've recently updated my satellite pro a100-828 to windows vista, and things work well to a large extent with two exceptions:

  1. I can't figure out how to activate the shortcut keyboard-support: media-keys to the left and the fn keys do nothing. There seems to be no shortcut keyboard-utility for windows vista in the drivers * tion. So what to do?
  2. the standby electricity utility is not available, which is good because of the power saver new vista. Except that I can't dim the screen, so the battery does not last me too long. How can I do this?

  Thanks in advance
  Best regards
  Christian

  Hello

  These problems can be solved in a few minutes. You only need the added package Toshiba. It contains the driver for the FN - key, Toshiba Power Saver and more useful tips.

  Here you can download:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck! :)

• Where to find bars of memory 2 GB for Satellite Pro A100

  According to the Toshiba site, the A100 has 2 memory slots for up to 2 GB per slot, but I can only find 1 GB max cards. Anyone know where I can find 2 GB cards?

  With the card, you mean the memory modules?

  You Satellite Pro A100 must be a unit of PSAACE-xxxx series because AFAIK other A100 Pro supports only 2 GB of memory.

  In any case, someone posted a useful link to the site to upgrade memory. I found this:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=26257&ft=m&St=3

  I chose the ProA100-828 because I put t know what exactly your unit.
  However, there is a 2 GB module shown.

  By the way: 200 pin DDR2-533 SODIMM modules are compatible!

• Satellite Pro A100 carpet * dvd uj - 841 s write at very slow speed

  Hello.

  The carpet * a dvd multi drive uj - 841 s that came with my satellite pro a100 written on very slow DVD. Firmware 1.50
  I use good philips and kodak media (both rated 16 X).

  now, I know that the drive is only rated at 8 X max. But I can't even reach 6 X.

  A firmware update would solve this?

  Thank you very much.

  Hello

  To my knowledge, some burning applications control the burning speed to obtain the best possible results from burning
  As you probably n t know the speed of combustion higher risk of burn errors
  I burn my DVD only using a single 1 x speed.

  Then I can be sure that all DVD players would be able to play the burned DVD.

  Greetings

• Satellite Pro A100-81: memory Pro Duo card is stuck in the card reader

  I am the proud owner of a Satellite Pro A100-81. I inserted a Duo Pro Memstick into the slot of the card reader...

  The card slipped too deeply into the slot so that I unfortunately can't remove the card more.
  Any ideas how to remove the card?

  Hi Gary

  Are you sure that the laptop computer s card reader supports memory stick Pro Duo?
  It s unusual who supported cards will slip to deep into the slot, something as may occur if the card is not taken in charge and is not compatible with the slot

  However, you shouldn't t do anything hard disk average if you n t know how remove it ask someone to help him with more experience for laptop

• Satellite Pro A100-830 with 4 GB of memory but the BIOS tells me that I have only 3 GB

  I have a Satellite Pro A100-830 and I bought the maximum memory for what is 2x2gb, for a total of 4 GB in my world. When I put the DIMMs in themselves in a slot, the BIOS reports 2 GB. BIOS Bravo! When I put both together, I see only 3 GB in the bios!

  I found this link on the Crucial site. http://www.crucial.com/kb/answer.asp?QID=4251

  Suggest page files, peripherals etc. occupy memory on your system at startup, before the operating system is used I guess. If you do not have the maximum memory installed, you should see the total memory. If you got the maximum memory installed, you will not see the memory used by page etc. files. Why would it be? Why you would see 2 GB if you have only 2 GB but then see 3 GB if you have 4 GB due to the system!

  Anyone can shed some light on this subject and be eligible or reject the information in this link. I need to replace the memory and/or the pc?

  Thank you

  Mark

  This is not a BIOS problem but a Windows.
  I found this info:
  Windows XP Professional 32-bit is limited to 4 GB of address space. If you have 4 GB of RAM installed, it won't show 4 GB in Windows. You will probably get what the size of your pagefile subtracted the 4 GB.

  Some of this address space is reserved for the hardware and the operating system... so you will never have access to the 4 GB maximum in any case. If you want access to 4 GB of RAM +... your best solution is to pick up XP Pro 64 - bit... but this will only work if your CPU P4 has EMT64. (64-bit)
  You can also try to turn on DEP if it is not already enabled... This will also allow EAP that can give you access to all 4 GB

  So finally a response:
  > Do I need to replace the memory and/or the pc
  -> No, everything is ok... you need not to change the hardware

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye

• Cannot remove cover memory! Satellite Pro A100

  Hello, I am sorry to say that I am not able to remove the cover of the memory on the bottom of my laptop (satellite pro a100-491). I learned from the user guide that there is that a single screw to open the cover. But despite remove the screws (to the extent possible) the lid does not move. I don't want to use force so I wondering if theres a trick to open easily. I tried really a lot before posting here.
  If anyone can help me I would be very grateful.
  THX kai

  Hello

  Simply replace the cover with a little force.

  Good bye

• Satellite Pro A100-229 - Incompatible of CRUCIAL memory

  Hello friends,

  Just bought memory upgrade for my Satellite Pro A100-229 in Crucial.com but these modules do not work in my laptop?

  Details of the product is:-_ * CT12864AC667.8FG (1 GB SODIMM DDR2 200PIN 128 M x 64 PC2-5300 * _).

  Does anyone know what memory modules will work in my Satellite Pro series please?

  Or y at - it anyway I can make these modules work please?

  Thank you very much.

  Hello

  If the modules are not compatible so you won't get work
  I think you should check some Kingston modules: * DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM *.

  I ve bought some Kingoston modules and they are working properly.

• How to find out the resolution of the external monitor max on Satellite Pro A100-02Y

  I have a Satellite Pro A100-02Y.

  I want to launch an external monitor but don't have any idea how big a monitor will deal graphics drivers. How will I know?

  Thanks for any help.

  Hello

  You should keep one fact in mind that the available screen resolution depends on the graphics card and the graphics card driver.
  If I'm not mistaken, you can find the max somewhere graphics card resolution information in the user manual.

  But note; If the graphics card driver does not support you favorite resolution then you will not be able to use and to choose!

  In the properties of the graphics card, you can find the available screen are supported by GPU driver resolutions.
  Usually these resolutions could be used on the external monitor, but only if the external monitor takes care of everything.

  Best regards