Cannot remove HARD disk configuration PERC 6i with use of the SAS drives foreign. Existing data are not important. Scratch reloading to redeploy the server.

Similar Questions

• Hard disk Configuration question...

  Hello

  I just ordered a new Qosmio custom.  It has an i7 Processer 4700MQ and 16 GB DDR3L 1600 MHZ SDRAM.  The primary HD is an mSATA SSD 256GB.  The second and third HDs are the two 500 GB (7200 RPM, Serial ATA)

  I'm looking for the best configuration of the installation for the first Pro on hard disks for best results with respect to the speed and efficiency.  Any info would be greatly appreciated.

  Thank you for your consideration.  It is a big problem for me and I am in kind of uncharted waters with several hard drives.  It is a big step up.  (I'm not a professional.  It's all related hobby)

  It looks like a portable Setup loud enough!

  I suggest doing a RAID 0 the two HDS and most all the data files (media, projects, export) on the RAID. This should give you the best performance for your hardware.

  For files of zero and cache you can experiment with try them first on boot/OS/programs (SSD) drive vs RAID array 0.

  Good luck and please report your finds for your specific projects.

  Kind regards

  Jim

• After the reinstallation of Vista (32 bit) I'm done with Windows and most of the stuff on the disk 1 (c), but with stuff on the disk 2 (d).

  original title: after reinstallation of Vista (32 bit), I found myself with Windows and most of the stuff on the disk 1 (c), but with stuff on the disk 2 (d). It's hard to backup.

  I wish all the disk 0, which is 250 GB, leaving the 1 free 500 GB disc to have been the repository of backup and archiving of others.  But I don't want to have to reinstall everything.  I couldn't move bootmgr, BOOTSECT. BAK and 'boot' folder on the disk 1 (c) by somehow the system partition?  Then there would be no OS stuff on disk 0 (D :); back, but better than mixed.)  What happens if I disconnect physically the smallest disk, Startup Repair will make the disc with Windows boot and system partitions? Thank you.

  Hi OldScientist,

  Before performing these steps, it is recommended to make a backup of your important data.

  Step 1: Mark Disk 1 (C) as active partition, then launch Startup Repair

  Follow the steps mentioned in the link below to mark C as active partition

  Mark a partition as active

  http://Windows.Microsoft.com/en-us/Windows-Vista/mark-a-partition-as-active

  Follow the steps mentioned in the link below to launch the Startup Repair tool

  How to use Startup Repair?

  If the problem persists,

  Step 2: Follow the steps mentioned in the article below to rebuild the BCD (Boot Configuration data)

   

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information".

  http://support.Microsoft.com/kb/927391

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer won't allow me to access my files on my portable hard disk without error appear "you must format the E: drive before using it. How can I fix this please!

  My computer won't allow me to access my files on my portable hard disk without error appear "you must format the E: drive before using it. How can I fix this please!

  Try to scan your driver with anti-virus, also try to throw the disc looking for this driver and as you try to run the following tools:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

• Using the service 'Release hard disk': some pictures of stay in "Update the Photos to reissue", even if I publish it

  Hello

  First of all please excuse my bad English. [I am french :-)]

  I have 2 different problems with pictures in smart albums used in a service of "Publish on hard drive" [Publication of the Service of hard disk] :

  -some of them stay in the section "Updating the Photos to republish" ['Changed to republish photos'] even when I publish it. The published photo is created and saved on my hard drive, but the picture goes to the section "Published photos" [published Photos by] for a second and then go back to the section "update the Photos to republish. To move back then in 'Published Photo', I need to use the "mark as up to date" [mark as updated] option in the right click menu.

  d ' other hand, some ot them (maybe the same) are still stuck in the section 'photos Publised' even if I do some changes (adding keyword, change some options of development...).

  Can I have some help please?

  Fabien.

  I had the same problem and I found the solution here: Lightroom CC 2015, error Publishing Services

  -Terje

• the size of my hard disk decreases every time I used tune up utilities

  the size of my hard disk decreases every time I used tune up utilities, then I uninstalled tunup utilities, but on cheking the hard dist, I found that I actually used only 368 168 GB but it demonstrates that only 141 Go free instead of 200 GB, how do I find my free space of hard disk?

  Windows 7 - disk space usage reports

  JDiskReport:
  http://www.jgoodies.com/freeware/JDiskReport/
  Shows the use of the space by folder and also great records list 50.
  This will give you a breakdown of your disk space if you can identify what is using all your disk space.
  (Works in Windows 7, requires that Java is installed: http://www.java.com/en/)

  Strategies to free up disk space
  http://Windows.Microsoft.com/en-us/Windows7/strategies-for-freeing-disk-space

  J W Stuart: http://www.pagestart.com

• I had to rebuild my computer after a hard disk failure. How can I reinstall the CC that I already paid for?

  I had to rebuild my computer after a hard disk failure. How can I reinstall the CC that I already paid for on my new drive?

  Install the application of cc on your new hard drive desktop, https://creative.adobe.com/products/creative-cloud and use it to install your programs of cc.

  [moved from the download, installation, commissioning creative cloud download &install]

• Z10 Z10 BlackBerry BlackBerry data are not compatible with the version of the software you are currently using

  Due to some problems with my BlackBerry Z10 I concerned with my service provider, after recommendation that I wiped my BlackBerry Z10, to update the OS security

  After all this. I am unable to restore completely, (Emails, Contacts, calendar and device settings cannot be restored)

  Link blackBerry screen: the data are not compatible with the version of the software that you are currently runnin

  Kindly guide me I'm too worried about my data, which is very important for me

  If you still get www.bberror.com//bb10-0015 and have not corrected:

  Read the troubleshooting tips for error Knowledge Base BB10-0015
  0015 - file unrecoverable system error has been detected.
  More information can be found here: http://support.blackberry.com/kb/articleDetail?ArticleNumber=000034545

  http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/error-BB10-0015/m-p/2685103#M45693

  I recommend you use a charger automatic file to restore the operating system on your device:
  https://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/upgrading-OS10-devices-using-aut...

• New PC with Windows XP, XP replacement. My PDF docs are not open

  New PC with Windows XP, XP replacement. My PDF docs are not open and I get the following messages: BE Adobe Reader could not open 'xxx.doc' because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded). OR Word now converts your PDF in an editable Word document. This can take some time. etc. Help please.

  You have Microsoft Word installed? If so, it seems that you need to change your file associations so that Word opens files .doc instead of the player. To do this, select a .doc file, right-click and choose "open with > choose default program", select MS Word and make sure that "Always use the selected program to open this type of file" is selected.

• Need help with my hard disk configuration

  Hi guys,.
  Ive read a lot about the best configuration of hard disk for my editing video pc... but I need some feedback. Here are my specs. Im running Windows 10 with this HD configuration. I use my system for Premiere Pro, Photoshop, Lightroom, and After Effects.

  1 SDS drive 250 GB operating system, program files, swap file

  2 HDD (sata III) of disk 2 TB stockmedia / assets / my documents

  Disc 3 HARD drive (sata III) projects 2 TB

  4 drive HARD drive (sata III) 750Go export/renders, PP previews

  5 HARD drives (sata III) of disk cache AE, PP, scratchdisk photoshop, captured 750Go audio/video media cache

  
  

  If it would be really beneficial to my performance, I also have another HARD drive disc (sataIII) 2 TB which I could build in the case.

  It looks all right? Or you guys change anything? I have a RAID configuration, but what I understand... RAID 3 or 5 would have need of more disks (same size preferred) and preferably a hardware controller. But my budget will not allow this for now.

  Thanks in advance for your comments guys...

  You probably already read this, but if you do not page Tweakers: Disk Setup

  you drive configuration looks good, you can use the windows resources monitor to determine if the readers are struggling as well.

  If I had to change something, I would try 2x2tb raid 0 (disk 2 and 3) for media/assets/projects using mbd raid (if your mbd supports raid). I might even try to add the spare hard drive 2 TB, 3x2tb RAID 0 for performance even more. If 'my documents' is just random storage (not for your active video projects), you can move to another drive out of the raid, as the 4 drive or another room to spare. Since you already have these parts, raid can be a good way to boost performance for free. any raid can add some risks more data loss, so you just make sure that your backups stick to the currents. You can save a copy of the project first (just the file .prproj) in a few different places at the end of your editing sessions, or use auto-enregistre to another location, to avoid having to save as much.

  Moreover a unique fast sata ssd is comparable to 3 hard drives in raid, so you could look (s) ssd, sata for better cheaper and simpler vs an expensive hardware raid card. SATA ssd prices keep falling off and show no signs of slowing down, so if/when you get some later, they could be even more affordable.

• C220 M3 independent RAID / hard disk configuration

  Hi all

  We recently received a C220 1.5.3b M3 which will serve as a virtual machine for Cisco servers. I have difficulty getting the machine to detect the hard drive, which I added. It does even not show the hard drive in the boot option in the BIOs. I watched some of the related topic and found this: http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-com...

  The list of hard drives are given in table 11 of the document. At the end of the table, he States:

  Approved (1) the RAID Configurations on board, mezzanine cards and all RAID PCIe controllers

  If you have not selected the option upgrade integrated RAID (ROM5 or ROM55), a mezzanine card or a PCIe RAID controller on the internal disks (LSI MegaRAID 9271 - 8i or 9271CV-8i), you can select up to 4 drives SATA only which will be controlled with the only integrated SATA RAID controller.

  Otherwise, select up to eight SAS + SATA drives listed in table 11. You can mix SAS and SATA drives

  Does this mean C220 needs a RAID controller or a Mezzanine Card to detect a hard drive?

  Also, should we use hard drives in table 11?

  Thank you!

  Greetings.

  According the data sheet you have referenced, you may use any Sata disks listed with the controller on board.

  If you have the ROM5/ROM55 or LSI megaraid card, then you can use one of the disks SATA or SAS registered.

  If you bought the SAS drives, but strictly the sata controller integrated without the option ROM5/ROM55 chip, then do not see or be able to use the disks.

  If you use other readers what can be found on the data sheet, the system will not recognize the readers.

  If you have disks Sata and intend to use the built in software raid LSI, you will want to confirm that you have enabled the UCS ROM option (see http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C220/install/C220/raid.html#80418

  Note that the embedded software raid controller is not supported in VMware.

  Thank you

  Kirk...

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/c/HW/C220/install/C220/RAID.html

• Remove hard disk while the VM is on

  I have a requirement for the removal of a hard disk of a VM to script while it is running. I can do this OK the client virtual infrastructure, but if I try and get the PowerCLI I get an error that the operation cannot be performed while the virtual machine is on. Any ideas on how to work around this problem? Here are the commands I'm using:

  $hd = get-disk hard - vm myvmname | where {$_.} Name - eq 'hard drive'}

  Remove-hard drive - disk hard $hd - confirm: $false

  I am running 4.0U1 PowerCLI and the latest version of vSphere, ESXi and vCenter.

  Thank you

  James

  You can remove hard drives a guest under tension when the disks are connected to a SCSI controller.

  For IDE hard drives that won't work.

  And you are right, that the cmdlet Remove-hard drive does not seem to be taken into account.

  It will remove only the hard drives when the host is turned off.

  But you can use the SDK ReconfigVM_Task method.

  $vmName = "MyVM"
  $hdName = "Hard disk 3"
  
  $vm = Get-VM $vmName | Get-View
  $tgtdev = $vm.Config.Hardware.Device | where {$_.DeviceInfo.Label -eq $hdName}
  $dev = New-Object VMware.Vim.VirtualDeviceConfigSpec
  $dev.operation = "remove"
  $dev.device = $tgtdev
  $spec = New-Object VMware.Vim.VirtualMachineConfigSpec
  $spec.DeviceChange += $dev
  $vm.ReconfigVM($spec)
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Tecra S11 - 140 - HARD disk Protection works only with windows 10

  After a clean install of windows 10 in my laptop S11-160, Device Manager does not recognize HARD drive Protection sensor, so in the HARD disk Protection settings, this option cannot be enabled. Is it possible to fix it, or I come to windows 7 and then move to 10?

  Another problem is that when I try to burn a dvd or a cd, I get an error: "write speed is too fast or too slow. The reader, MATT * A DVD-RAM UJ890AS, worked perfectly on windows system 7.

  Any help would be appreciated!

  After you install clear 10 Windows in my laptop TECRA S11-160, Device Manager found no sensor HARD drive protection, so within the parameters of this protection cannot be enabled. What I have to go back to windows 7 and upgrade to Win 10, or is there another solution?

• IDSM2 cannot initialize hard disk, IDSM2 during reinvent it.

  I try to reinvent the application partition.

  During the process, I got an error:

  Available disk space is not enough for the upgrade of the IDS.

  Could not initialize the hard disk. ERROR: The Application Installation failed. View log upgrade for more details.

  Here's the upgrade log output:

  Proceed to the upgrade of the image.

  Fri Aug 11 14:58:02 2006: argv1 = 0, argv2 = 0, argv3 = 3, argv4 = 1

  Fri Aug 11 14:58:02 2006: image ID creating application file...

  Fri Aug 11 14:58:02 2006: footer: XXXXXXXXXXXXXXXX

  Fri Aug 11 14:58:02 2006: exeoff: 0000000000032251

  Fri Aug 11 14:58:02 2006: image: 0000000066616416

  Fri Aug 11 14:58:02 2006: T: 66616464, e: 32251, I: 66616416

  Fri Aug 11 14:58:02 2006: partition: / dev/hdc1

  Fri Aug 11 14:58:02 2006: startIDSAppUpgrade:Image: /tmp/cdisk.gz

  Fri Aug 11 14:58:02 2006: startIDSAppUpgrade:Device: / dev/hdc1

  Fri Aug 11 14:58:02 2006: startIDSAppUpgrade:Install type: 1

  Fri Aug 11 14:58:02 2006: initializing the hard drive...

  Fri Aug 11 14:58:03 2006: device "/ dev/hdc" is too small for IDS.

  Fri Aug 11 14:58:03 2006: available HDD space is not enough for the

  ID upgrade.

  Fri Aug 11 14:58:03 2006: failed to initialize the hard disk.

  Fri Aug 11 14:58:03 2006: upgrade failed.

  Anyone know how I can fix this problem and can help me. ?

  Sometimes the HDD IDMS2 failure is transient (heads of disc may get out of sync prolonged usage without counters). If this is the case then you can pull the blade from the chassis (only the way to actually turn off the hard drive), wait 30 minutes and then reinstall the blade and try again. If that's not enough then the hard drive has permanent damage, so you will need to contact Cisco TAC and ask them of RMA of the blade.

• Why my computer says "Windows has detected a hard disk problem", even though it says that the drive works fine in the properties?

  Hello

  I was doing some courses on my computer until this window came on my screen and playback;
  "Windows detected a hard disk problem. I immediately went and checked in the properties to see the current status of the disk, and it says "this device is working properly" I am confused and decided to restart my computer. Again, read the error message and it says that the disc was allowed in properties. Every 15 minutes or so, the same error message. I'm running on Windows Vista Edition Home Premium and have had the computer since 2008. Is this a virus? Or - is this just the computer falsely detect a problem?
  Can anyone help please?

  Thank you very much

  Liam

  What you see in the drive properties in Device Manager has to do with drivers and the drive configuration, not the real state 'physical' the reader.

  First of all, I error side of caution and if sure you have a backup of all your personal files, data, music, photos, contacts, movies, etc., external media (favorite external hard drive).

  Run the check disk (chkdsk); I suggest to run with two checked options, difficulty of file system errors and scan for and attempt recovery of bad sectors.

  How to run the check disk at startup in Vista or Windows 7
   http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Many manufacturers of computers and most hard disk manufacturers have diagnostic tools free you can download and run to check the status of your drive. Check on the web sites of their respective support.

  Hardware and software vendor contact information
   http://support.Microsoft.com/GP/vendors

  Computer manufacturers
   http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Kind regards