Cannot remove members by using the OutlineLoad utility

Similar Questions

• Can I use the disk utility on an external hard drive Mac os 10.6.8 to repair the drive on my macbook pro running mac os 10.7.5?

  Can I use the disk utility on an external hard drive Mac os 10.6.8 to repair the drive on my macbook pro running mac os 10.7.5?  My Macbook Pro does not start after that I upgraded to mac os 10.6.8 Lion and I have a bootable backup just before the upgrade.

  OS X: on OS X Recovery - Apple Support

• Designjet z2100 predefined paper sync to the driver using the HP utility is greyed out.

  Hi all

  I have a z2100 24 "on the latest firmware v9.0.0.5 (November 2012) and the latest drivers installed on Win7 64 bit OS. Last UTILITY.

  I downloaded a Preset paper HP (HP Everyday matte adhesive polypropylene) from the HP website and downloaded the document preset to the printer. The predefined paper displays on the front panel of the printer under custom paper types. If it worked.

  To synchronize the document for my permit profiles now, I need to use the HP utility, but PROFILES PAPER SYNC icon is grayed out. Therefore, the paper type is not available in my driver. That's my problem.

  Any ideas why I can't sync the downloaded document preset on the driver using the HP utility?

  Thank you very much

  Charl.

  This forum focuses on the level of consumer products.  For the Designjet you can have better results, post in the forum HP Designjet here.

• SDO_NN cannot be assessed without using the index when put inside subquery

  Hi all

  I met a problem when you use the function sdo_nn to find the nearest neighbor. Here is my scenario:

  _ I have 2 customer and store tables.

  Customer table _ a client_ID and a 2D sdo_geom point

  _ Store table has store_ID and a 2D polygon sdo_geom.

  In the beginning, I have this query to find the nearest store to each customer as below:

  Select s.STORE_ID, c.CLIENT_ID

  store customer, s c

  where sdo_nn (s.MYPOLYGON, c.MYPOINT, 'sdo_num_res = 1', 1) = "TRUE";

  _It works as expected when it returns a table showing the nearest store each customer.

  _Now I want to count the number of customers who have the same nearest store:

  Select / * + INDEX (store store_spatial_idx, client_spatial_idx client) * / count (nearest_store. CLIENT_ID)

  from (select s.STORE_ID, c.CLIENT_ID

  store customer, s c

  where sdo_nn (s.MYPOLYGON, c.MYPOINT, 'sdo_num_res = 1', 1) = "TRUE") nearest_store

  Group of nearest_store. STORE_ID;

  This query generates the following error:

  Error report-

  SQL error: ORA-13249: SDO_NN cannot be assessed without using the index

  ORA-06512: at the 'MDSYS. MD", line 1723

  ORA-06512: at the 'MDSYS. MDERR", line 17

  ORA-06512: at the 'MDSYS. PRVT_IDX', line 9

  13249 00000 - '%s '.

  I'm pretty new to spatial databases and hope get help to go further. Thank you in advance!

  Hello Pinball,

  Oracle space tends to be a quite complex with many variables and moving parts.  We chatted about the group to a sort of FAQ or guidelines to help people like you submit questions that actually answers.  First of all, you really have to tell us the version of Oracle you are using.  Particularly the problems involving the optimizer, version down to the exact defined patch number is a good idea.  Secondly, you took the time to submit the question so I guess you want a response.  If you really want to see the answer and then providing an example is one of the most important things that you can do.  I'm going to do here for you, but in general people on this forum come and go and are often pushed into lurkitude, so if you want the coax to provide you with an example of work is the key.

  DROP TABLE store1 PURGE;
  CREATE TABLE store1(
      store_id INTEGER NOT NULL
     ,shape    MDSYS.SDO_GEOMETRY
     ,PRIMARY KEY(store_id)
  );
  
  DROP TABLE client2 PURGE;
  CREATE TABLE client2(
      client_id INTEGER NOT NULL
     ,shape    MDSYS.SDO_GEOMETRY
     ,PRIMARY KEY(client_id)
  );
  
  CREATE OR REPLACE PROCEDURE seeder(
      p_client_count IN NUMBER
     ,p_store_count IN NUMBER
  )
  AS
    sdo_foo MDSYS.SDO_GEOMETRY;
    int_counter NUMBER;
    FUNCTION random_point
    RETURN MDSYS.SDO_GEOMETRY
    AS
        num_x1 NUMBER;
        num_y1 NUMBER;
  
    BEGIN
        num_x1 := dbms_random.value(-179,179);
        num_y1 := dbms_random.value(-89,89);
  
        RETURN MDSYS.SDO_GEOMETRY(
            2001
           ,8265
           ,MDSYS.SDO_POINT_TYPE(
                num_x1
               ,num_y1
               ,NULL
            )
           ,NULL
           ,NULL
        );
  
    END random_point;
  
  BEGIN
    int_counter := 1;
    FOR i IN 1 .. p_client_count
    LOOP
        -- Create a client point
        sdo_foo := random_point();
        INSERT INTO client2
        VALUES (
            int_counter
           ,sdo_foo
        );
        int_counter := int_counter + 1;
  
    END LOOP;
  
    int_counter := 1;
    FOR i IN 1 .. p_store_count
    LOOP
        -- Create a store polygon of some kind
        sdo_foo := MDSYS.SDO_GEOM.SDO_ARC_DENSIFY(
            MDSYS.SDO_GEOM.SDO_BUFFER(
                random_point()
               ,5000
               ,0.05
            )
           ,0.05
           ,'arc_tolerance=0.05'
        );
        INSERT INTO store1
        VALUES (
            int_counter
           ,sdo_foo
        );
        int_counter := int_counter + 1;
  
    END LOOP;
  
    COMMIT;
  
  END seeder;
  /
  
  BEGIN
    seeder(10000,200);
  END;
  /
  
  BEGIN
    INSERT INTO user_sdo_geom_metadata(
        table_name
       ,column_name
       ,diminfo
       ,srid
    ) VALUES (
        'STORE1'
       ,'SHAPE'
       ,MDSYS.SDO_DIM_ARRAY(MDSYS.SDO_DIM_ELEMENT('X',-180,180,.05),MDSYS.SDO_DIM_ELEMENT('Y',-90,90,.05))
       ,8265
    );
  
    COMMIT;
  
  EXCEPTION
    WHEN OTHERS
    THEN
        NULL;
  
  END;
  /
  
  BEGIN
    INSERT INTO user_sdo_geom_metadata(
        table_name
       ,column_name
       ,diminfo
       ,srid
    ) VALUES (
        'CLIENT2'
       ,'SHAPE'
       ,MDSYS.SDO_DIM_ARRAY(MDSYS.SDO_DIM_ELEMENT('X',-180,180,.05),MDSYS.SDO_DIM_ELEMENT('Y',-90,90,.05))
       ,8265
    );
  
    COMMIT;
  
  EXCEPTION
    WHEN OTHERS
    THEN
       NULL;
  
  END;
  /
  
  CREATE INDEX store1_spx ON store1
  (shape)
  INDEXTYPE IS MDSYS.SPATIAL_INDEX
  NOPARALLEL;
  
  CREATE INDEX client2_spx ON client2
  (shape)
  INDEXTYPE IS MDSYS.SPATIAL_INDEX
  NOPARALLEL;
  
  /* Works as expected */
  SELECT
  s.store_id
  ,c.client_id
  ,MDSYS.SDO_NN_DISTANCE(1)
  FROM
  store1 s
  ,client2 c
  WHERE
  MDSYS.SDO_NN(
      s.shape
     ,c.shape
     ,'sdo_num_res=1'
     ,1
  ) = 'TRUE';
  
  /* No worky? Works for me */
  SELECT
  ns.store_id
  ,COUNT(ns.client_id)
  FROM (
     SELECT
      s.store_id
     ,c.client_id
     FROM
      store1 s
     ,client2 c
     WHERE
     MDSYS.SDO_NN(
         s.shape
        ,c.shape
        ,'sdo_num_res=1'
        ,1
     ) = 'TRUE'
  ) ns
  GROUP BY
  ns.store_id
  ORDER BY
  ns.store_id;
  

  So I wrote this about 12 c (12.1.0.2.0) and everything works fine for me.  Then I moved back from 11 GR 2 (11.2.0.4.0) and of course, there are questions.  So I guess that you don't use flavor of 11g.  So at this point we can look at the docs and see for 11g, have you often need to specify which table is the head and that is the one that has the spatial index to use.
  http://docs.Oracle.com/CD/E11882_01/AppDev.112/e11830/sdo_operat.htm#SPATL1032

  Its rather interesting that the optimizer of 12 c knows what you want, when I had to squint myself at your request and to play a little with the refining.  Note that SDO_NN is sensitive, because the geometry of the main table should come second in the operator.  I did not know that on the top of my head.

  
  SELECT
  /*+ LEADING(c) INDEX(s store1_spx)  */
   s.store_id
  ,c.client_id
  ,MDSYS.SDO_NN_DISTANCE(1)
  FROM
   store1 s
  ,client2 c
  WHERE
  MDSYS.SDO_NN(
      s.shape
     ,c.shape
     ,'sdo_num_res=1'
     ,1
  ) = 'TRUE';
  
  SELECT
   ns.store_id
  ,COUNT(ns.client_id)
  FROM (
     SELECT
     /*+ LEADING(c) INDEX(s store1_spx)  */
      s.store_id
     ,c.client_id
     ,MDSYS.SDO_NN_DISTANCE(1)
     FROM
      store1 s
     ,client2 c
     WHERE
     MDSYS.SDO_NN(
         s.shape
        ,c.shape
        ,'sdo_num_res=1'
        ,1
     ) = 'TRUE'
  ) ns
  GROUP BY
  ns.store_id
  ORDER BY
  ns.store_id;
  

  So I think that is your answer.  Give it a shot and see if this fits the Bill.  Of course, moving to 12 c would be useful for such things.  It would be interesting to collect more examples of this kind of space thing where 12 c is the answer. Also, would be nice if we could mark somehow this discussion as applying only to 11g and earlier versions.

  See you soon,.

  Paul

• SDO_NN giving ORA-13249: SDO_NN cannot be assessed without using the index

  Hi people,
  
  I do not understand why the SDO_NN gives ORA-13249 in circumstances.
  
  SQL > SELECT SlavaTest WHERE SDO_NN s s.title (s.geometry, SDO_GEOMETRY (2001, 4326, SDO_POINT (14.0, 49.0, NULL), null, null)) = 'TRUE' and title like '%' and rownum < 10;
  
  TITLE
  --------------------------------------------------------------------------------
  MultiPoint_305199
  LineString_691779
  MultiPolygon_180478
  MultiPolygon_358113
  MultiPolygon_53008
  MultiPolygon_249905
  MultiPolygon_204076
  MultiPolygon_636994
  MultiPoint_464514
  
  9 selected lines.
  
  SQL > SELECT SlavaTest WHERE SDO_NN s s.title (s.geometry, SDO_GEOMETRY (2001, 4326, SDO_POINT (14.0, 49.0, NULL), null, null)) = 'TRUE' and timestamp > = to_timestamp (January 6, 2011 ', ' dd/mm/yyyy') and rownum < 10;
  SELECT SlavaTest WHERE SDO_NN s s.title (s.geometry, SDO_GEOMETRY (2001, 4326, SDO_POINT (14.0, 49.0, NULL), null, null)) = 'TRUE' and timestamp > = to_timestamp (January 6, 2011 ', ' dd/mm/yyyy') and rownum < 10
  *
  ERROR on line 1:
  ORA-13249: SDO_NN cannot be assessed without using the index
  ORA-06512: at the 'MDSYS. MD", line 1723
  ORA-06512: at the 'MDSYS. MDERR", line 17
  ORA-06512: at the 'MDSYS. PRVT_IDX', line 49
  
  The spatial index is created with:
  CREATE the INDEX SlavaTest_geometry_idx_spatial ON SlavaTest (geometry) INDEXTYPE IS mdsys.spatial_index;
  
  'Title' and 'timestamp' columns have an index.
  
  Note the query comes from Hibernate and I can't change it's arbitrary.

  Slava2 wrote:
  What this means - there is a bug in Oracle?

  Well, it could probably be considered a, but [url http://docs.oracle.com/cd/E11882_01/appdev.112/e11830/sdo_operat.htm#i78067] documentation on SDO_NN warns you:

  Documentation says:
  However, if the column in the WHERE clause predicate specifies a non-space column in the table for geometry1 with an associated index, make sure that this index is not used by specifying the NO_INDEX indicator for this index.

  See you soon,.
  Stefan

• How to submit the report BEEP using the CONCSUB utility

  Hi all
  
  I presented the report BEEP using the Concsub utility. But I got the xml instead of PDF output.
  
  I found that the page layout is not attached with this concurrent program.
  
  Please guide me how to add the layout with this simultaneous program when sending through CONCSUB.
  
  Kind regards
  Karim
  
  Published by: karim on November 5, 2012 13:32

  Ok

  I tried and I can't say how it works, but there work ;)

  step by step for r12
  -create a XXAND17 cp
  -create data XXAND17 definition
  -create the XXAND17 model

  [oracle@oebs out]$ CONCSUB APPS/APPS FND 'Application Developer' SYSADMIN WAIT=N CONCURRENT FND XXAND17
  Submitted request 9915625 for CONCURRENT FND XXAND17
  

  cd $APPLCSF/$APPLOUT
  

  and see the o9915625.out to open it and it's xml data. then ok

  [oracle@oebs out]$ CONCSUB apps/apps FND 'Application Developer' SYSADMIN WAIT=N CONCURRENT XDO XDOREPPB Y 9915625 0 XXAND17 en N RTF RTF
  Submitted request 9915626 for CONCURRENT XDO XDOREPPB Y 9915625 0 XXAND17 en N RTF RTF
  

  See o9915626.out open it and it isn't xml
  It looks like word doc

  {\rtf1\ansi\deff0
  {\fonttbl
  {\f0 Arial;}
  {\f1 Times;}
  {\f2 Courier New;}
  {\f3 Calibri;}
  }
  ...
  

  copy on the local computer and rename it to o9915626.rtf
  opened by the word and she is out as well report

  so conclusion:
  XDOREPPB works fine but not rename output way output format (rtf in my case)

  If this is a bug or a profile must be defined

  -Add

  SQL> select LOGFILE_NAME, OUTFILE_NAME from fnd_concurrent_requests r
    2  where request_id in (9915625, 9915626)
    3  /
  
  LOGFILE_NAME                                                                     OUTFILE_NAME
  -------------------------------------------------------------------------------- --------------------------------------------------------------------------------
  /oracle/VIS/inst/apps/VIS_oebs/logs/appl/conc/log/l9915625.req                   /oracle/VIS/inst/apps/VIS_oebs/logs/appl/conc/out/o9915625.out
  /oracle/VIS/inst/apps/VIS_oebs/logs/appl/conc/log/l9915626.req                   /oracle/VIS/inst/apps/VIS_oebs/logs/appl/conc/out/o9915626.out
  
  SQL> select * from fnd_conc_req_outputs where concurrent_request_id  in (9915625, 9915626)
    2  /
  
  CONCURRENT_REQUEST_ID  OUTPUT_ID FILE_TYPE                      FILE_NAME                                                                        FILE_NODE_NAME                                                                    FILE_SIZE ACTION_TYPE FILE_CREATION_DATE
  --------------------- ---------- ------------------------------ -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ---------- ----------- ------------------
  
  SQL> 
  

  =/

  Published by: Alexandr on 8 November 2012 06:28

• import schema using the load utility

  Hi all
  
  I extracted my plan by using the generator of EPMA file and the file is a csv file. I am trying to load it using the load utility and I get this error message
  
  "Failed to get analytical information and or perform a data load: unknown to the header of column values.
  
  1st row in the Excel worksheet. Hierarchies = account
  Second row: Parent, child, data storage...
  
  I need to change this header...?

  You exported the hierarchy from an application of EPMA, is not in the same format required for the charger to contour and a classic application, the format is quite different.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• SDO_NN cannot be assessed without using the index

  Hello
  I'll try to find more close neighbours of a point using two tables (grafo_ped_links & haltestellen) and I fail miserably quiet.
  
  Select h.desc_i, grafo_ped_links h.numpal g, haltestellen h where (g.geometry, h.geometry) sdo_nn = 'true' and g.start_node_id = 355 and rownum < = 5
  *
  ERROR on line 1:
  ORA-13249: SDO_NN cannot be assessed without using the index
  ORA-06512: at the 'MDSYS. MD", line 1723
  ORA-06512: at the 'MDSYS. MDERR", line 17
  ORA-06512: at the 'MDSYS. PRVT_IDX', line 49
  
  But I am able to find the nearest neighbor on individual tables (singularly) without any problem. I'm even able to find a WITHIN_DISTANCE using two tables (below the sql statement).
  
  Select h.numpal from grafo_ped_links g, haltestellen h where SDO_WITHIN_DISTANCE (h.geometry, g.geometry, 'DISTANCE = 0.5 UNIT = KM') = 'TRUE' and g.start_node_id = 355;
  
  NUMPAL
  ----------
  5122
  5103
  5102
  5120
  5100
  5301
  5302
  5303
  
  I even dropped the indexes of the two tables and recreated them again. I read somewhere that the problem could be due to a lack of advice, so I tried the following and I still get the same error.
  
  
  Select / * + LEADING (g) INDEX (h haltestellen_ridx) * / h.desc_i, h.numpal
  of grafo_ped_links g, h haltestellen
  where (g.geometry, h.geometry) sdo_nn = 'true' and g.start_node_id = 355 and rownum < = 5
  
  Select / * + INDEX (h haltestellen_ridx) NO_INDEX (g grafo_ped_links_ridx) * / h.desc_i, h.numpal
  of grafo_ped_links g, h haltestellen
  where (g.geometry, h.geometry) sdo_nn = 'true' and g.start_node_id = 355 and rownum < = 5
  
  Select / * + USE_NL (h, g) VALUE * / h.desc_i, h.numpal
  of grafo_ped_links g, h haltestellen
  where sdo_nn (g.geometry, h.geometry, 'sdo_num_res = 5', 1) = 'true' and g.start_node_id = 355 and rownum < = 5
  
  
  Anyone can please, show me the way, or give a hint. I use oracle spatial 11g.
  
  Thank you!
  Cook
  
  Published by: user611283 on December 30, 2009 06:11

  It should be 'TRUE '.

  Select h.desc_i, grafo_ped_links h.numpal g, haltestellen h where (h.geometry, g.geometry) sdo_nn = 'TRUE' and g.start_node_id = 355 and rownum<=>

• Can't remove avast even in SafeMode! How can I remove if I can't use the uninstall utility?

  Started in safe mode (at least, it should be safe mode see run and msconfig start) and I still cannot use the utility uninstall avast. Using Microsoft XP with system updates (I'm not sure complete specifications)

  My avast shows the AAVM subsystem RPC error whenever I open it.

  Any help would be greatly appreciated!

  Started in safe mode (at least, it should be safe mode see run and msconfig start) and I still cannot use the utility uninstall avast. Using Microsoft XP with system updates (I'm not sure complete specifications)

  My avast shows the AAVM subsystem RPC error whenever I open it.

  Any help would be greatly appreciated!

  http://www.avast.com/uninstall-utility

  Above is how to uninstall Avast.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• How to use the del command or any other to ignore files that it cannot remove (files in use) and continue to delete other files in a folder?

  I want to do a batch tha clean windows Temp folder. For this, I tried the del command, but the problem is to stop the deletion of files when it cannot remove a file in use. I want that he skip this file and continue to delete the other files too. I hope you guessed it. Please help me.

  Hello

  Thanks for posting your question in the Microsoft Community.

  The question you posted would be better suited in the MSDN Community.
  http://social.msdn.Microsoft.com/forums/en-us/categories

• Cannot remove CPTL file from the desktop using Vista

  Hi all
  
  I can't file CPTL remove office by using Vista. Explorer crashes. It is a Captivate 2 file.
  
  I tried (with no luck):
  -logging in as a different user and delete the file.
  -l' Explorer running as administrator
  -uninstall of Captivate.
  
  Anyone got any ideas?
  
  See you soon,.
  
  Garnett

  Hi Aaron,

  I tried all your suggestions but not in the same order! The last thing I tried before posting here was to uninstall Captivate and I was still unable to delete the file (or rename). After uninstall AND restart the machine, I was still unable to delete the file, BUT I managed to rename the file (including the extension) and delete the file!

  Thanks for getting back to me. It's a strange!

  See you soon,.

  Garnett

• Remove access by using the import safety

  Hello
  
  
  We are able to create and update the permissions of the users using ImportSecurity.cmd.But where if we want to remove access for all users then how we can use this effective utility because the data are data warehouse and access 'NONE' cannot be assigned to end of DW.
  
  
  Thanks in advance

  If you reload the security whenever you use the SL_CLEARALL parameter to clear the safe first before loading.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Cannot remove my password of the user account.

  On Windows Vista, my user account has a password. But when I tried to remove it, it says: "Windows cannot remove the password. "Password policy or account require the account has a password.

  In this case, use the tutorial I gave you... automatic login without the password.
  http://www.Vistax64.com/tutorials/66966-logon-automatically.html

  Note: you always keep the password for your user account, you do not need just to use it during logon.

• Cannot run business ruleset using the Launcher command line for the calculation Manager

  Hello

  I use the Hyperion 11.1.2.2 planning version. I am trying to execute a business rule defined via the calc Manager command line utility. Please see the order form below,

  D:\Oracle\Middleware\user_projects\epmsystem1\Planning\planning1 > CalcMgrCmdLineLauncher.cmd /U:HBRadmin D:Capex /A:CORP S:Capex_Nightly

  At the launch of the above command, the utility starts and ends without triggering the rule in the database. See log info below,

  Local planning: en_US

  using java.library.path: D:\Oracle\Middleware\EPMSystem11R1/products/Planning/lib64

  EPM_ORACLE_HOME (D:\Oracle\Middleware\EPMSystem11R1) has the value of the property 'EPM_ORACLE_HOME' of the JVM.

  using the property of Java for Hyperion home D:\Oracle\Middleware\EPMSystem11R1

  For the non - RFP app, ask size is not necessary

  EPM_ORACLE_INSTANCE (D:\oracle\Middleware\user_projects\epmsystem1) has the value of the [EPM_ORACLE_INSTANCE] property of the JVM.

  Support RTC Essbase Version: 0xb1221

  null

  But if I try to execute a business rule with the calc Manager command-line utility, it works well. It is only rules base which poses problem. Please note that this set of rules is to have business rules that belong to a database that is Capex.

  Any help on this request would be much appreciated. Please notify.

  Thank you

  AP

  Please ignore this request,

  I found the KB article below

  Hyperion Planning Rulesets cannot be launched using the CalcMgrCmdLineLauncher planning (Doc ID 1453630.1)

  Thank you

  Arun

• Cannot run CS6 after using the CC (CC subscription has expired)

  I let my subscription CC expire (while my company treats a new license) and to do in the meantime to CS6. However, I cannot go beyond the message 'Renew your membership' and can't seem to save my copy of CS6 (it will not be displayed as a registered product and I can not add). I tried to use the CleanerTool Adobe CC (as recommended here), removed all Adobe products and reinstalled CS6 (and rebooted), but still can't make it work. Any help would be greatly appreciated!

  Hi Andre, try the steps mentioned in the link below.

  • License considerations mixed - if you have an active member of the creative cloud and a serial number for Lightroom 6

  Waiting for your response.

  Atul_Saini