cannot replicate 12 c

Similar Questions

• Cannot replicate from the primary to the secondary servers ACS

  I have a primary ACS server and secondary and trying to replicate the primary database to the secondary.  When I do, the seconary reports 'inbound replication of database of ACS '' denied - shared secret mismatch. "  I believe that this refers to the shared secret, as I walked to the encryption of the database during installation.  Is it possible to change this secret shared without having to reinstall?  (Note that this isn't the key to AAA listed for itself in the Network Configuration).

  Version is 4.1 on Windows Server 2003.

  What version of acs do you use, and it is in fact the shared secret for the AAA servers and not the shared secret for the encryption of the database. There is a known bug, if you look at the free entry on the two instances of the acs is either one of them shows a loopback address and not the real ip address? If Yes, then you hit the bug I mentioned. The best way to solve it is to access the console as and change the ip address (for example to enable the dhcp pull an ip address and let the services restart). Then go back into the box and assign the static ip address you used. Services once to return to verify that the entered car now has the correct ip address (physical and not looping) and test your replication again.

  Thank you

  Tarik

• Cannot replicate session on weblogic cluster

  Hi all
  
  I try to simulate cluster weblogic on a single machine. But why my weblogic installation can not replicate the session to another server? I'm trying to listen to HttpSessionListener for any event (session create or destroy), but only one server to deal with this application for handling and create the session. the other doesn't. where is my wrong setting?
  
  and when I try to access Internet without session, the server is reactivated to manage demand. but when the session, have already asked will stick only to a server for each session, I try to use weblogic 9 and 10.3. the two behavior is the same.
  
  Here is my setup of weblogic:
  
  Manage the server:
  
  1 address (localhost:7004); name (ms1); machine (mcn1)
  2. address (localhost:7005); name (ms2); machine (mcn1)
  
  each session on the managed server object is serializable.
  
  and on each server to manage weblogic.xml:
  
  < wls:session - descriptor >
  < wls:debug - active > true < / wls:debug - active >
  < wls: persistent-store-type > back < / wls: persistent-store-type >
  < wls: sharing > true < / wls: sharing enabled >
  < / wls:session - descriptor >
  
  Cluster: Cluster mode messaging is multicast. I try MulticastTest and its working fine.
  
  Load Balancing: I create the new domain (localhost:7002) and use the weblogic proxy for load balancing. just copy paste documentation.
  
  WebLogic.xml on proxy domain (load balancing)
  
  <! DOCTYPE weblogic-web-app PUBLIC "-//BEA Systems, Inc.//DTD Web Application 9.1 / / IN" "http://www.bea.com/servers/wls810/dtd/weblogic".
  "810-web - jar.dtd" >
  < weblogic-web-app >
  < context root > / < / context root >
  < / weblogic-web-app >
  
  Web.XML on proxy domain (load balancing)
  
  <! DOCTYPE web - app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3 / / IN" "http://java.sun.com/dtd/web-app_2_3.dtd"; >
  <>web - app
  < servlet >
  < name servlet - > HttpClusterServlet < / servlet-name >
  > the servlet class <
  weblogic.servlet.proxy.HttpClusterServlet
  < / servlet-class >
  < init-param >
  WebLogicCluster < param-name > < / param-name >
  localhost:7004 < param-value > | localhost:7005 < / param-value >
  < / init-param >
  < init-param >
  KeyStore < param-name > < / param-name >
  < param-value > / mykeystore < / param-value >
  < / init-param >
  < init-param >
  KeyStoreType < param-name > < / param-name >
  JKS < param-value > < / param-value >
  < / init-param >
  < init-param >
  PrivateKeyAlias < param-name > < / param-name >
  passalias < param-value > < / param-value >
  < / init-param >
  < init-param >
  KeyStorePasswordProperties < param-name > < / param-name >
  mykeystore.properties < param-value > < / param-value >
  < / init-param >
  < / servlet >
  < servlet-mapping >
  < name servlet - > HttpClusterServlet < / servlet-name >
  < url-pattern > / < / url-pattern >
  < / servlet-mapping >
  < servlet-mapping >
  < name servlet - > HttpClusterServlet < / servlet-name >
  *.jsp < url-pattern > < / url-pattern >
  < / servlet-mapping >
  < servlet-mapping >
  < name servlet - > HttpClusterServlet < / servlet-name >
  *.htm < url-pattern > < / url-pattern >
  < / servlet-mapping >
  < servlet-mapping >
  < name servlet - > HttpClusterServlet < / servlet-name >
  *.html < url-pattern > < / url-pattern >
  < / servlet-mapping >
  < / web - app >
  
  Thank you.
  
  Edited by: jeggy 12 January 2011 01:47

  The webserver plugin using the link session (or sessions).

  How does him choice of server is explained in the figure presented here: http://download.oracle.com/docs/cd/E11035_01/wls100/plugins/apache.html#wp113659

  Here you can see if a sessionid is presented that it routes the request to the primairy server. A server primairy and secondairy is chosen in the cluster on a first request.
  The format of the session ID is: JSESSIONID = SESSION_ID. PRIMARY_JVMID_HASH! SECONDARY_JVM_HASH! CREATION_TIME. The first part is used by the
  implementation session in WebLogic Server to search the customer HttpSession object in the context of tracking web application. Subsequent parts of the session ID
  are used to identify the primary and secondary servers for this customer in a WebLogic Server cluster and track time created for this session.

  When you make a server - this is when failover occurs - the secondairy server takes over the request. Now, you would probably see that a session is created on the other server.

• Cannot replicate the AutoFill feature that I got on google before I updated fierefox to 5.0

  Before I updated firefox to 5.0, my google toolbar has a feature called AutoComplete in which I stored my personal info. When I had to fill out a form on any web site, all I had to do was click auto fill and the news would automatically download in the spaces on the form. It's a great time saver and I am angry that in upgrading to firefox 5.0, I lost this ability because google is not compatible.

  If you can not live without Google and Firefox toolbar as a pair, try using this extension to force the Google toolbar compatibility

  https://addons.Mozilla.org/en-us/Firefox/addon/add-on-compatibility-reporter/

  Check and tell if its working.

• Cannot replicate the data in the table...

  Hello
  each process works well. but whn I check my data pump process log file then it shows
  
  Size of the buffer for the Socket GGS INFO 406 27985 value (RAS size 27985).
  GGS WARNING 150 238 (Connection timed) TCP/IP error out.
  
  Thank you
  
  Kind regards
  AMSII

  Could you please put more of the report file associated with failure?

  This message:
  Size of the buffer for the Socket GGS INFO 406 27985 value (RAS size 27985).

  Is normal and should be here, it just says: what is the size of the socket and its adjustable.

  The other message:
  GGS WARNING 150 238 (Connection timed) TCP/IP error out.

  Is the criticism and basically indicates that the connection has expired. Perhaps the target is unreachable, or may not be crazy or the other System Manager is not running, or extract acting as a pump is not the right Manager port number.

• cannot replicate user SS on Essbase

  Hi all
  
  I use EMP 11.1.1.3 (Essbase). As I could not create a new user through the Regional service, I entered the SS, created the user and implemented it. I right click to the user created-> available. So I wait for my Essbase application and assigned the role.
  Then I go to EAS, myServer, security, I right click on it and select update security of Shared Services. He's going through, but I do not see the user. I don't see the default admin user.
  I restarted the service, even the server and nothing.
  
  Can someone help, please?
  
  Thank you!

  There is a role of "Server Access":-http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_security/apas02.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Cannot replicate reversed 'sequence' when coding showEffect

  Hi people,

  I need code hideEffect and showEffect in shown in the selection of the different elements in a ViewStack.

  For the showEffect, I need to container appears in a minimum of the middle of the screen size until it reaches its full size.

  For the hideEffect, I need the opposite of this: to decrease the size of the container until it reaches a minimum size.

  Alpha in both effects should change too (but it is a future problem)

  I got the hideEffect covered this:

  <s:Scale id="hideEffect"
          scaleXFrom="1" scaleXTo="0.1"
       scaleYFrom="1" scaleYTo="0.1"
       autoCenterTransform="true"
       duration="200"/>
  

  This makes the container disappear by reducing its size.

  I have problems with the showEffect.

  If I put this:

  <s:Scale id="showEffect"
          scaleXFrom="0.1" scaleXTo="1"
       scaleYFrom="0.1" scaleYTo="1"
       autoCenterTransform="true"
       duration="200"/>

  Or this:

  <s:Animate id="showEffect">
              <s:SimpleMotionPath property="x" valueFrom="512" valueTo="0"/>
              <s:SimpleMotionPath property="y" valueFrom="384" valueTo="0"/>
              <s:SimpleMotionPath property="scaleX" valueFrom="0.1" valueTo="1"/>
              <s:SimpleMotionPath property="scaleY" valueFrom="0.1" valueTo="1"/>
  </s:Animate>

  The container appears in the upper left corner of the screen. I guess it has to do with the fact that the container that does not know its final "Center."

  That's why I tried the second solution, but without success.

  If I put only the 'x' and 'y' properties of the effect, the container appears in the middle and headed the point from coordinates (0,0). But when I add the scaleX and scaleY properties, the container is first shown in the middle (for a brief moment of veeeeeeeeeeeeeeeeery) but appears in (0,0) and it increases the size from there.

  Can anyone shed a light on this?

  Thank you!

  Hi Rod,

  Well, the question is well known among the metro of flex.

  See, to reach what you need would be to tell flex to apply these effects, which depends on the final x and y of the object, once the object is already on the laoyout.

  To do this, you must add applyChangesPostLayout = "true" to the declaration of object scale effect.

  A different approach, in my view, would be to play with the addChild on the transicitions tag, but that my College is another story.

  Try this and enjoy your balance!

  Kind regards

  Juanjo

• Cannot replicate the nice buttons

  Hello

  I'm no expert of fireworks, but I did my best to try and imitate these buttons nice I got to a linked web site work.

  I tried to play with the shadows and lights, but not yet the same quality.

  Pls help, would be ideal to find tips to make them. Thank you very much!

  I post here the jpeg-s. Only 3 are allowed.

  Vlad

  Oh... I misread your previous question. The line vertical and carved varies in color because it is at 25% opacity, which allows to blend with her colors under. Overall, there is variation in the background color which I think may be due to JPEG artifacts.

  The grey buttons below are to have the same treatment as the upper gray buttons, Yes, you may need to change the offset or softness on the shadows of get it exactly as you want once you set size. In addition, you will need to experiment with colors to gray blue and clear buttons.

• Replicate the VMS with FTP and VM with virtual disk shared by: SRM with vSphre replication

  I have a VM and FT is configured on it. Now I can reproduce the virtual machine with SRM with replication of vSphere. I have not configured array based replication. Similarly, I have two DB VMs cluster, but they share a virtual disk between them. Can I replicate these VMs DB with vSphere replication?

  Your valuable contribution is much appreciated.

  I got the answer, for the virtual machine with FT and shared virtual disk replication, to do SRM with array based replication. vSphere replication cannot replicate virtual machine with FT or shared disk.

• Satellite L - How to start a 'clean' installation to change from 32-bit to 64-bit?

  Tech thing last sale showed me to select 64-bit when I start computer at home.
  This option is not moved when it is installed.
  Returned to stock, and an another tech sales show me to press the 'market', and then continuously, press F10.

  Up to pop option of 32-bit or 64-bit. Simple!
  Go home to try it - cannot replicate. Get something like "start on partition 2' instead.
  All forums omits describe these details, as we are supposed to be born with the knowledge.

  What should I do - what I'm going to hurt?
  Is there another step he did so quickly, that I have not seen?

  Phone number for Toshiba not responding.

  Hello

  If you want to change the system to 64-bit, you will need to start the HARD drive recovery system!

  You must turn on the unit and press F8.
  Then choose fix my computer.
  Now, you can choose the HARD drive recovery.
  During this process, we should ask if you want to choose 32-bit or 64-bit

  But it is an option only for laptop preinstalled with both systems!
  What Satellite series you have exactly?

• MacBook pro 13 inch retina 2014 heating abnormally

  its very random and I can't replicate. I was in warranty and and the centre for apple (India) said that even they cannot replicate we waited 2 hours doing heavy programs just to check but nothing happened and I didn't pay a lot of attention because it was random, now its off to control what are my options?

  the heat is very intense and feels like it will explode at any moment

  Bring her back. If there is a warranty support ticket, they should always honour the fact there is a problem.

• Windows Server R2 2012 domain server has problem of tombstone

  8614 directory service cannot replicate with this server because the time since the last replication with this server has exceeded the tombstone lifecycle.

  I have a primary domain server and five additional domain controller (all servers running windows server 2012 R2), each in the other location. In that four of them works fine. but a single additional DC because of the headstone, because of server has long downtime (more than one year). I also try to demote the domain controller, but unable to it. So is there a solution

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• life of outdated tombstone

  I just noticed that there was difference of time I've fixed but now after having seen the mistakes of replication, and it states that the AD cannot replicate with x server because the time since the last replication with this server has exceeded the tombstone lifecycle.

  There are two domain controllers and one running windows server 2003 and another running windows server 2008 standard edition.

  Any suggestion how to fix this

  Any suggestion how to fix this

  Hello

  Work through these search results

  http://www.bing.com/search?q=tombstone+life+time+exceeded

  or

  post on the appropriate forum TechNet

  http://social.technet.Microsoft.com/forums/en-us/categories

  Don

• BSOD has known during Windows 7 SP1 install

  Hello again,

  I recently posted here (LINK) about a number of problems I had with my PC that I assumed were resolved when I discovered my previous hard drive would die quickly, resulting in corrupted, system files etc.

  First of all, a chronology of the mistakes that I started to experience this month: Please see my previous thread (link) for detailed information about the errors here.

  30 April - installed the second module of 4 GB memory (Corsair 4 GB DDR3 1333 mhz XMS3, manufacturer: CMX4GX3M1A1333C9)

  02 may - crash first experienced, uncertain, conditions, as I was AFK.

  08 may - new SATA cable bought as I suspected one that connects my hdisk to my motherboard caused the original crash.

  16 may - first BSOD, it is product in the game.

  Initially, I suspected my module RAM second, newest to be initially, but after a lot of help and advice (see link), I discovered that my hard drive was not.

  Note on RAM: both modules are identical and installed in their recommended media. In the BIOS/DRAM config, they are on Unganged.

  20 may - after buying a new hard drive and install Windows on it I was installing updates (SP1 was among them) when my PC struck a blue screen; I checked using WhoCrashed dump files: ntoskrnl.exe and ntkrnlmp.exe seem to be the culprits - Bugcheck code: 0x1A (0xFFFFFA800488D690, 41790, 0 x 0 x 0, 0xFFFF)

  After the reboot, the update done OK.

  I used the sfc/scannow command found no breach of integrity.

  The next day, I ran Memtest86, making several past - 2 on my old module, 2 on the module of suspects and two with two modules in their default positions (DDR3_1 and DDR3_2). All the tests showed 0 errors.

  I realize that in Memtest past terms 7 or 8 can produce errors where 2 can present a sound module...

  All drivers are up-to-date, or I more not less successful them anything.

  Today (May 22) my PC suddenly lost power and restarted, and the event was almost like a brown-out as it also caused my landline downstairs to turn. It's happened once or twice in about 3 years, and I have no idea what causes it.

  When the PC was trying to start it would not go beyond POST and gave me the following message is displayed:

  Verifying DMI Pool Data...
  AMD data change... Update new data on a DMI interface!

  I had noticed this message several times when I was performing a clean installation of Windows (2 days ago), however, it wasn't a problem then. In fact, I remember a startup sequence where new data on a DMI interface update was followed by 'success'

  Then more waiting, a lot of the HD activity.

  Boot from CD/DVD
  DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER

  As a result, I put off the system and replaced the SATA cable (which I think is maybe defective), the computer started and entered correctly in Windows. No error logs or dump didn't report files, critical just an error in Event Viewer (Kernel-Power, event ID 41, task category 63).

  I ran sfc/scannow and it came back with the "Windows Resource Protection found corrupt files but was unable to solve some of them."

  System then invited to restart and it auto-couru chkdsk, a copy of the journal of wininit is attached, please see below.

  I ran sfc/scannow, once again, Windows Resource Protection not found any breach of integrity this time.

  At this point, I'm quite confused. I have no idea what causes these errors and cannot replicate force. I am sure that it is the RAM, but it was also suggested to me that the error is the CPU, the PSU or the same level of BIOS.

  FILES:

  Minidump

  report of BlueScreenView

  DriverView

  Information System

  Wininit

  MY SPECS:

  Type of PC: desktop
  OS: Windows 7 Ultimate SP1 x 64 (detail)
  Age about hardware: 3 years again
  The age of the BONES: one day (reinstalled on the new hard drive)

  CPU: AMD Phenom II X 4 955
  Motherboard: Gigabyte MA770T-UD3
  MSI R6950 Twin Frozr III video card
  Memory: 2 x 4 GB DDR3 1333 mhz RAM Corsair
  PSU: EZCool 550W JSP

  Hello

  Yes, all drivers that have been installed by myself is from the manufacturer's websites. It's a short list; they are

  Audio, Chipset and Gigabyte LAN (rev 3.1)

  AMD graphics

• Web - strategies of repeated access security appliance

  Hi all

  I deploy web security with function HA 2 appliance, but it cannot replicate the policies between the web security appliance 2, any solution to replicate the strategies between web security appliance 2 as a centralized management of the ESA?

  Thank you

  Hello

  HA (failover) WSA option is only for failover between had and he can't replicate all configurations/policies.

  If you need to have the same configuration or identical between WSA devices, you can use the SMA unit with master configuration or each WSA devices individually with the same installation configuration.

  Concerning

  Handy Putra