BSOD has known during Windows 7 SP1 install

Similar Questions

• Windows Vista SP1 install problem

  Have ultimate Visa on computer and SP1 appears in update as long as 1.9 Mb file {KB936330}. Installation seems to go ok excepy who, after having agreed to be wary of many reboots, is seems to load in a few seconds [appears as update added] with no restarts BUT a few minutes later, the same update appears.

  Tried to get around this by downloading the SP and running of the saved file. Once again, everything seems ok [several reboots this time] until step 3 of 3 is 100% full and the message appears while the SP has not then install the steps are to be set aside. In the end, the 0x800F0826 code appears as explantion. I have treid research on this problem, but to no avail yet.

  Can someone help me?

  Hello.

  Here is some information on this error code:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/error-code-0x800f0826-when-installing-Windows/2f034887-C30A-4E2D-9BB7-d07246d6b4ae

  "Windows Update error 800f0826"

  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-800f0826#1TC=Windows-Vista

  _________________________________________

  It's the way you normally install SPs without using Windiws update:

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Update to Windows 7 SP1 installed, but not in installed updates or system

  Recently, I installed Windows 7 x 64 Ultimate on my pc and then with the update. All the updates successfully without error. Win7 SP1 update was also without errors. It shows in the history of the update, but not in the installed updates or computer properties. IE11 and Visual Studio will not install because they need SP1. I can't uninstall the update to try again because he's not here but windows update does not offer it (also tried the variant of the command prompt to uninstall does not work). I tried to reinstall the whole system, and it ends up the same thing again. Someone knows how to fix this problem or at least Visual Studio works without SP1?

  Restart your computer and wait 30 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Visioneer OneTouch 8700 USB Scanner Driver for Windows XP SP1 installed SP 2 compatibility mode - does not

  My machine is upgraded from XP SP2 to Windows 7. Support was interrupted by the manufacturer scanner after the pilot XP SP1.   Update of Windows in my system is always sur-installe updates automatically.   The scanner driver has been downloaded from the MFRS. ' site and installed in my computer Windows 7 in "compatibility mode for XP SP2. The scanner icon in my system tray.   To make a physical connection to my system, I get error that it can not be connected or cannot be configured.   I have two USB ports of work attached to the Mo (Chinese-"Weibu") and two USB PCI card is compatible with XP and earlier versions (as shown on the box, no mention of Windows 7).   I tried all these ports, always the scanner does not connect to my system.   In addition, my device manager under USB controllers, shows the exclamation marks in yellow triangles against two elements of the same name: "VIA Rev 5 or later USB Universal Host Controller.   I uninstalled these 2 elements and restarted my system several times, without success.   At each reboot, the yellow marks disappear but soon reappear.  But the scanner worked perfectly fine in my old XP SP 2 system before moving on to Windows 7 and before installing the USB PCI card.

  Is there a solution to this problem up the old USB devices and running in the Windows 7 environment?   (I have a very old IBM PC Camera too that works well in my old XP system, but not yet tried in the current system, even if the driver has been installed).

  If finally I am not able to use the scanner under Windows 7, I reluctantly get Windows XP reinstalled on another drive and boot into it just to be able to use the scanner which is functioning perfectly.

  I am a person of 78 years and enjoy using and experimenting with my PC, which has become an addiction for me.

  Thank you.

  You can buy a copy of XP that would probably cost more to replace the scanner and now is not the right time to install XP anyway.

  Your webcam is a lost cause. Compatibility mode has been designed to work for older programs, and Microsoft does not recommend to use it to install the device drivers. I have no idea why some here suggest a possibility...

• Windows Update SP1 installed more than 10 times however, it continues to appear in "WINDOWS UPDATE" and impossible to install the SP2 or upgrade to Internet Explorer 9...

  I tried continually to upgrade Internet Explorer 8 for Internet Explorer 9 without success. When I do so it stops the installation and sent me to the site of installation of SP1. My system is Vista Home Premium, 32-bit, so I try to install this download required and received a message (I'm under frustrated memory) "not for your system" - something like that... The SP1 update is not successfully installed, I cannot update IE8 and do not have the slightest idea what to do...

  Why has not been installed SP2 years?

• Clean Windows 7 sp1 install Windows Update, error

  Two different computers. Clean install Windows 7 with SP1, 32-bit.

  Run Windows update and set to be installed other Microsoft products.

  Always get "an error occurred the news updates for your computer"

  8007000E error code.

  Memory insufficient because no other applications are running and no virus programs not installed. Without Language Pack installed by some of the information I found on this code. Clean install.

  The two I'm working on computers are Dell computers. Both we get same error. Very frustrating because I need to raise these two systems up and running.

  Cannot resolve this problem or find a working solution to the problem.

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

• Now windows vista SP1 installed, still restarts after hibernation

  Right after the installation of SP1 on windows Vista, the computer restarts after hibernation/locking laptop computer

  Hi Jason & florencedefermartel,.

  You can check the manufacturer's website and try to update the Chipset and drivers display and check.

  You can see the manual of the system manufacturer or contact the system manufacturer for more information on how to make the changes in the BIOS.

  Note: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Check out the link:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer

• Computer won't wake up from sleep with Windows 7 sp1 installed

  I have a problem very persistent and annoying.

  My office don't always sleep wake. When you wake the computer, fans turn and everything becomes energized, but the screen stays off. The only option at this point is to press on and hold the power button or turn the power off. Windows does not start, run and shutdown normally, but it fails every time trying to wake up from its sleep. The problem started after I installed Windows 7 service pack 1 and disappears if the service pack is uninstalled.

  I have a motherboard EVGA FTW3 with a Crucial C300 SSD as my main drive. I thought I had found a solution with http://support.microsoft.com/kb/2495523 but it didn't work. My bios is up to date, the firmware is up to date on my SSD and my the Marvell controller firmware is current. I tried to plug my SSD in the Intel SATA ports (and disable the controller Marvell making) but it did not help. I went through every setting imaginable, with the support of EVGA, tried to turn off "Allow hybrid sleep" in the power of the BIOS settings. The only change I found that 'fixed' the problem is uninstall Windows 7 service pack 1.

  My computer specs:

  Card mother EVGA FTW3

  Processor Core i7 980 x

  Memory Corsair Dominator DDR3 1600 (3 X 4 GB)

  EVGA GTX 580 graphics

  Crucial C300 SATA 6.0 Gps SSD

  Western Digital 1 TB SATA 6.0 Gps data drive

  NVIDIA 3d Vision Kit

  I use the latest drivers for all devices because I clean just installed Windows 4 days to try to resolve the situation.

  Beta EVGA Bios recovery mode fixed 80 S3 sleep for me also. Everything seems to work perfectly after that I did the bios flash.

• BSOD: 0 x 00000044 (Windows 7 SP1 x 64 Pro)

  Hello

  I had two BSOD today resulting with the same code 0 x 00000044. One was while I was playing the Sims 4 and have Firefox open.

  The second right after, when I started firefox.

  Here's the minidump: https://db.tt/AfAHg4tF (link dropbox)

  Thank you in advance!

  CA

  This isn't a final reading.  I would like to run it again.  If this is not a fall in the first pass of 6-7 is not bad.  If so, it could be either ram or the motherboard.

• This program has known compatibility issues when I try to install sql server 2008 in windows 7 X 64

  I use windows 7 (X 64), and when I try to install sql server 2008 I have this message & can not install it:

  ""

  This program has known compatibility issues:

  Check online to see if solutions available on the microsoft website ara, if we find solutions, windows will automatically display a Web site that lists the steps, you can take.

  Program: Microsoft sql server 2008

  Publisher: Microsoft

  When the sql server Setup program is finished, you must apply the service pack of sql server 2008 1 (SP1) or a later service pack before you run sql server 2008 on this version of windows

  Looking for online solutions run program cancel

  ""

  And I check online for solutions & recommended program installation, but also the same message appear, so please help me, how can I fix

  Hi DoudyEwais,

  1. How do you try to install SQL server 2008 on the computer?

  2. did you of recent changes on the computer?

  I suggest that you try to install the program using compatibility mode by running the program compatibility issues

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  List of known issues when you install SQL Server on Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/955725

  If the previous step fails, then after your query in the SQL server forums by using the link below.

  SQL Server forums

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

• Does anyone has installed Windows 7 SP1 for Toshiba Libretto

  Hi, what Windows 7 sp1 in the toshiba libretto?

  Someone has already installed it?
  Doesn't work well?
  Some problems?

  Rgds

  Thanks for sharing!

• I can't install programs on Windows 7, ERROR: 1601 has occurred during installation

  I can't install programs on Windows 7, ERROR: 1601 has occurred during installation

  Run the Windows Installer Cleanup utility, and then try to install a program:

  How to resolve common "Windows Installer " problems

  J W Stuart: http://www.pagestart.com

• How to install my BT stack for windows on the laptop using Windows Vistta SP1

  When I try to install my newly bought USB Bluetooth adapter (CN-512/521 v2 001) on my laptop from another production that has an operating system of Windows Vista SP1, it will help not make me, saying "Bluetooth Stack for Windows incompatible with this version of Windows, please check with Toshiba - contact Toshiba on upgrades or other possible solutions to make this program compatible with this version of Windows.

  But when I was directed to the Toshiba site I could not find any help or advice on this subject. Can someone tell me what to do?

  You are right. Use at least 5 or later if you want to install a Vista. Visit the website of the seller adapter USB Bluetooth if a newer version is available. The version on the Web of Toshiba Bluetooth site is customized for these books, and not as a result of your hardware.

• Windows 7 SP1 failed to install - 0X800736B3

  Any help would be greatly appreciated, I prefer not having to do a fresh install of Windows just to apply the SP1 update successfully, but here's a summary of what I tried to do so far:

  Attempt of Actions:
  (1) Windows Update - failure installing SP1 (0x800736B3)
  (2) installation of Microsoft Download Center (MDC) - failed

  Windows6. 1 - KB976932 - X 64 .exe - failed
  0X800736B3 ERROR_SXS_ASSEMBLY_NOT_FOUND
  The referenced assembly is not installed on your system.

  (3) installation of Microsoft Download Center - failed

  7601.17514.101119 - 1850_Update_Sp_Wave1 - GRMSP1.1_DVD. ISO - failed
  0X800736B3 ERROR_SXS_ASSEMBLY_NOT_FOUND
  The referenced assembly is not installed on your system.

  (4) disabled software anti-virus and convenience store update Windows performed via the Control Panel - has no

  Message received that error is corrected and reattempt to installation of Windows Update - failure (0x800736B3)

  (5) properly installed update tool of the system for Windows 7 for x 64-based systems (KB947821) [February 2011]

  Tried to install SP1 via Windows Update - failed (0x800736B3)
  Tried to install the SP1 package MDC - failed (0x800736B3)

  (6) restarted with only the system Windows drivers via Misconfig - has no

  Tried to install SP1 via Windows Update - failed (0x800736B3)
  Returned to install SP1 package MDC - failed (0x800736B3)

  (7) Installation of SP1 package MDC SafeMode - failed (0x800736B3)

  0X800736B3 ERROR_SXS_ASSEMBLY_NOT_FOUND
  The referenced assembly is not installed on your system.

  Solutions suggested to try:
  (8) run sfc/scannow
  (9) run Windows repair from the Installation CD
  (10)...
  (11)...
  (12)...

  Hardware specifications
  Processor: Intel Core i7-950 4.0 GHz (167 X 23/24 - TB & HT @ 1.312V)
  Primary GPU: Palit GeForce GTX 460 2 GB (1800/825/3600 @ 0.9 V) - 266.58
  Secondary GPU: Palit GeForce GTX 460 2 GB
  Tertiary GPU: Palit GTX 450 1 GB (783/1566/3608 @ 0.9 V)
  Memory: 12 GB A-data (2GBX3) DDR3/1600 MHz (1333-167 X 8 @ 1.81V 7-7-7-20)
  Motherboard: GigaByte GA-X58A-UD3R (Rev. 2.0 - FE1)
  PSU: Corsair HX1000W
  Hard drives: 1X1TB SATA III 6.0 GB/s (WD1002FAEX) and 2x1To II SATA 3.0 GB/s (WD1001FALS)
  Case: Azza Hurrican 2000 Full Tower
  Processor cooling: 570 LX Asetek liquid cooling w / 240mm radiator push-pull Configuration (40 c/70 ° C)
  Optical drive: Lite-On burner 24 x DVD
  OS: Windows 7 Professional 64 bit

  Information on the end:
  More detailed information some Windows updates had similar problems, which were resolved to install the Windows fix or installation after reboot with only system drivers. But this time non-joy, I hope someone here can suggest other possible solutions, I may have missed.

  Attempts to update:
  (8) run sfc/scannow

  After running Diagnostics, the log contains a series of mistakes which the diagnosis has not been able to fix, rather than take the time to identify and attempt to fix every error in topic, I chose to start with a clean slate.

  (9) new Windows installation - success

• Disc Association file missing after installing windows 7 SP1,.

  After installing windows 7 SP1, trying to open the drives C, D, F, I get error message cannot open, lack assocition file, can someone tell me how to solve this

  Restore the Type Associations by default Windows 7 file Extension:
  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Change the programs that Windows uses by default:
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.