Windows Server R2 2012 domain server has problem of tombstone

Similar Questions

• Upgrade of Windows 2003 to 2012 r2 DC replication problem

  Hello

  I added R2 2012 Windows server to windows 2003 sp2 (primary DC) DC and promotes as DC. After the promotion, I run dcdiag and it shows errors.

  Each of the servers have three NICs connected to different networks.

  Please help me with your expertise since I have to raise this Monday.

  Thank you

  Kind regards

  Charaf-eddine

  Here the dcdiag output new DC

  Directory Server diagnosis

  Perform the initial configuration:

  Trying to find the server at home...

  Home Server = CADPDC1

  * Identified AD forest.
  Made the initial collection of information.

  Make the required initial tests

  Test server: Default-First-Site-Name\CADPDC1

  Commencement of the trial: connectivity

  CADPDC1.engineer.com host name resolution error by

  IPv6 stack.

  WARNING: could not confirm the identity of this server in the

  Directory and names returned by DNS servers. Host name

  fixed error 0x2af9 "host is known."

  ......................... CADPDC1 passed test connectivity

  Primary testing

  Test server: Default-First-Site-Name\CADPDC1

  Commencement of the trial: advertising

  WARNING: DsGetDcName returned information for

  \\cadpdc. Engineer.com, when we tried to reach CADPDC1.

  SERVER IS NO ANSWER or IS NOT considered AS APPROPRIATE.

  ......................... CADPDC1 was not able to test advertising

  Beginning of the test: FrsEvent

  There are warning or error events in the last 24 hours after the

  SYSVOL is shared.  Don't not SYSVOL replication problems can cause

  The Group of political problems.
  ......................... CADPDC1 test FrsEvent

  Commencement of the trial: DFSREvent

  ......................... CADPDC1 test DFSREvent

  Commencement of the trial: SysVolCheck

  ......................... CADPDC1 test SysVolCheck

  Beginning of the test: KccEvent

  ......................... CADPDC1 test KccEvent

  Beginning of the test: KnowsOfRoleHolders

  [CADPDC] DsBindWithSpnEx() failed with the error-2146893022,

  The name main target is incorrect...
  ATTENTION: CADPDC is the owner of the schema, but does not meet the DS RPC

  Bind.

  [CADPDC] LDAP bind failed with error 8341,

  A directory service error has occurred...
  ATTENTION: CADPDC is the owner of the schema, but does not respond to LDAP

  Bind.

  ATTENTION: CADPDC is the owner of the domain, but does not meet the DS RPC

  Bind.

  ATTENTION: CADPDC is the owner of the domain, but does not respond to LDAP

  Bind.

  ATTENTION: CADPDC is the owner of PDC, but does not meet the DS RPC

  Bind.

  ATTENTION: CADPDC is the owner of PDC, but does not respond to the LDAP bind.

  ATTENTION: CADPDC is the owner of RID, but does not meet the DS RPC

  Bind.

  ATTENTION: CADPDC is the owner of RID, but does not respond to the LDAP bind.

  ATTENTION: CADPDC is the owner of Infrastructure Update, but is not

  meet DS RPC Bind.

  ATTENTION: CADPDC is the owner of Infrastructure Update, but is not

  respond to LDAP Bind.

  ......................... CADPDC1 failed test KnowsOfRoleHolders

  Beginning of the test: MachineAccount

  ......................... CADPDC1 test MachineAccount

  Beginning of the test: NCSecDesc

  ......................... CADPDC1 passed test NCSecDesc

  Beginning of the test: NetLogons

  Cannot connect in the NETLOGON share. (\\CADPDC1\netlogon)

  [CADPDC1] An net use or LsaPolicy operation failed with error 67.

  The network name was not found...

  ......................... CADPDC1 failed test NetLogons

  Commencement of the trial: ObjectsReplicated

  ......................... CADPDC1 test ObjectsReplicated

  From test: Replications

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: DC = ForestDnsZones, DC = engineering, DC = com

  The replication generated an error (-2146893022):

  The name main target is invalid.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:21.

  1 failures have occurred since the last success.

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: DC = DomainDnsZones, DC = engineering, DC = com

  The replication generated an error (-2146893022):

  The name main target is invalid.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:21.

  1 failures have occurred since the last success.

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: CN = Schema, CN = Configuration, DC = engineering, DC = com

  The replication generated an error (1727):

  The remote procedure call failed and did not execute.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:06.

  1 failures have occurred since the last success.

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: CN = Configuration, DC = engineering, DC = com

  The replication generated an error (-2146893022):

  The name main target is invalid.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:07.

  1 failures have occurred since the last success.

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: DC = engineering, DC = com

  The replication generated an error (-2146893022):

  The name main target is invalid.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:21.

  1 failures have occurred since the last success.

  ......................... CADPDC1 failure test replications

  Beginning of the test: RidManager

  ......................... CADPDC1 failed test RidManager

  Commencement of the trial: Services

  ......................... CADPDC1 test passed Services

  Beginning of the test: SystemLog

  A warning event occurred.  Event ID: 0x000727A5

  Generated time: 27/06/2014-17:01:38

  The event string:

  The WinRM service is not listening to the WS-Management requests.

  A warning event occurred.  Event ID: 0 x 80050004

  Generated time: 27/06/2014-17:05:03

  The event string:

  HP 1 GB 2 332T adapter ports Ethernet: the network link is down.  Check that the network cable is connected correctly.

  A warning event occurred.  Event ID: 0xA004001B

  Generated time: 27/06/2014-17:05:06

  The event string: HP NC112T PCIe Gigabit Server Adapter

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:39

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was LDAP/cadpdc.engineer.com/*** Email address is removed from the privacy *. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:39

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was ldap/cadpdc.engineer.com/*** address email is removed from the privacy *. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:41

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was of cadpdc$. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:43

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was GC/cadpdc.engineer.com/engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  A warning event occurred.  Event ID: 0x000727AA

  Generated time: 27/06/2014-17:05:43

  The event string:

  The WinRM service could not create the following SPNS: WSMAN/CADPDC1.engineer.com; WSMAN/CADPDC1.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:55

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was cifs/cadpdc.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  A warning event occurred.  Event ID: 0 x 84350444

  Generated time: 27/06/2014-17:05:58

  The event string:

  Information System Officer: health: Post errors have been detected.  One or more errors of Power-On-Self-Test were detected when the server starts.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:59

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was E3514235-4B06-11D1-AB04-00C04FC2DCD2/5122bd13-c8ac-4265-a879-3a6831224994/*** Email address is removed from the privacy *. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:59

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was ldap/cadpdc.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0x0000410B

  Generated time: 27/06/2014-17:05:59

  The event string:

  The request for a new account identifier pool failed. The operation will be retried until the request succeeds. The error is

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:06:07

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was LDAP/cadpdc.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0x0000041F

  Generated time: 27/06/2014-17:06:30

  The event string:

  The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

  An error event occurred.  Event ID: 0x0000041D

  Generated time: 2014/06/27 17:07:07

  The event string:

  The processing of Group Policy failed. Windows could not resolve the user name. This can be caused by one or more of the following:

  An error event occurred.  Event ID: 0x0000041F

  Generated time: 2014/06/27 17:11:32

  The event string:

  The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

  An error event occurred.  Event ID: 0x0000041F

  Generated time: 27/06/2014-17:16:33

  The event string:

  The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:16:38

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was LDAP/5122bd13-c8ac-4265-a879-3a6831224994._msdcs.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0x0000041F

  Generated time: 2014/06/27 17:21:35

  The event string:

  The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

  ......................... CADPDC1 failed test SystemLog

  Commencement of the trial: VerifyReferences

  ......................... CADPDC1 test VerifyReferences

  Running partition tests: ForestDnsZones

  Beginning of the test: CheckSDRefDom

  ......................... ForestDnsZones passed test CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ......................... ForestDnsZones passed test

  CrossRefValidation

  Running partition tests: DomainDnsZones

  Beginning of the test: CheckSDRefDom

  ......................... DomainDnsZones passed test CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ......................... DomainDnsZones passed test

  CrossRefValidation

  Running partition tests: schema

  Beginning of the test: CheckSDRefDom

  ......................... Schema passed test CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ......................... Schema passed test CrossRefValidation

  Running partition tests: Configuration

  Beginning of the test: CheckSDRefDom

  ......................... Configuration test past CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ......................... Configuration test past CrossRefValidation

  Running partition tests: engineer

  Beginning of the test: CheckSDRefDom

  ... engineer passed test CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ... engineer passed test CrossRefValidation

  Running tests of the company: engineer.com

  Commencement of the trial: LocatorCheck

  ... engineer.com passed test LocatorCheck

  Commencement of the trial: cross-site

  ... engineer.com passed test intersite

  Hi Chamarasi,

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please do not hesitate to contact us if you have other questions related to Windows.

• Windows server backup problem

  whenever I start a backup full on the standard (windows 2012 R2) server, I get the following error "the backup generated an exception.

  the backup was working earlier. y at - it a windows update that may have damaged the backup procedure?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• My Web server has problems with my site from Muse...

  I just wanted to make a simple editor for my website, came to Adobe Muse, cast as a Web site, and it worked fine. Then I jumped on my Web server, and the trouble started. Each individual page gives the same popup, 'some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. "I have also many errors of the console javascript, according to page. Some widgets don't work, and I don't understand why. I decided to talk to my hosting provider, which have basically tried to tell me that since I am on a common plan, my javascript is screwey. obviously false. Why my Web host (HostGator) is struggling, when simply launch the .html out of my desktop computer or Adobe Business Catalyst works absolutely fine?

  Thanks in advance,
  Alex

  Thanks for the help, but that turned out not that it is. The culprit was my .htaccess file. I put it to redirect any request without a point followed by 3 to 4 characters for .html and .js is only 2 characters.

• Mac didn't stop after Photoshop to access files on windows server

  Hello world

  We have a weird problem when our users access files on our server to windows. They can change the files and everything seems to be fine, but when you try to shut down the mac, the system never end closing, even after waiting until the next morning. Only way to stop this force turned off. Someone at - it an idea, how do I solve the problem?

  We have verified that the problem only occurs when you open files directly on the share - local files do not cause this problem. There is also no other apps to access the share.

  Specifications of customers:

  Mac OS 10.10

  Photoshop 2015

  To access the files via smb share (smb: / / [Server].) FQDN/Share)

  24 gig RAM

  128 GB Flash drive

  27 "iMac

  Specification of the server:

  Windows Server 2008 R2

  NTFS file permissions: full access to the security group

  Client is a member of the security group (but not in the same domain as the file server)

  So far ideas? Someone has a similar problem?

  Best regards

  Tobias

  Hello

  When you try to access the files on the server, MAC launched a security process.

  This process could not be top-down.

  Please check that the activity monitor.

  For the best response you can contact Apple/MAC support.

  As Windows uses MAC system MAC OS partition and FAT/NTFS partition

  There could be conflict as well.

  Also please check if a Windows machine attempts to access Windows Server, the problem still exists.

  Concerning

  Jitendra

• replacement computers. How can I keep all of my old emails. old computer windows live mail 2011 new computer windows live mail 2012

  replacement computers. How can I keep all of my old emails. I have hundreds of emails in the sent folder and hundreds in my folder of emails saved on my old computer (windows live mail 2011) but when I open windows live mail 2012 on my new computer all the folders are empty. I signed the same account on both computers.

  old computer windows live mail 2011 new computer windows live mail 2012 it is the problem

  Brian

  It is relatively simple as you use and that you want to use WLM.

  You will need to copy a folder from where it is (the old installation) to another place where you know it will be (for example on your desktop)

  The folder is c:\users\your user name\app data (if it is not there, see the note below) \local\microsoft\

  At that point you will see a folder named oddly enough "windows live mail" copy on your desktop

  If you don't see the app data because it is invisible atm.  To make it visible, you need to go to your control panel > folder options > view > change to hidden folders (see figure)

  

  Once you have mail backed up on your desktop (or where ever) drag the folder from the desktop to the location for the new WLM (once again we C;-... just like above).  Just make sure that WLM does not run in time.  What wont be imported, it of passwords and rules.

  Accounts and data should now be in the new WLM when you open it.

• Prerequisites for domain controller promotion is not for windows server 2012

  For windows server 2012 check of preconditions for the promotion of domain controller has failed. TCP ports required by Active Directory Domain Services are already in use on this computer. You must remove or reconfigure the services that currently use these ports (88, 389, 636, 3268, 3269).

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows Server Std 2012 R2 domain controller

  Hello world. We have problems in the domain controller with Windows Server R2 2012 in the VM that it helps domain users to connect to the DC remotely with admin rights. We have already allowed group policy by default on the management of the user rights that allow remote only for domain administrators. We did not refuse access, because the new user must be added to each new user creation. We do not want to use distribution of the Group deny. is it possible to access remotely to DC?

  Thanks in advance.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Error activation product key has been used already on Windows Server 2012.

  Original title: Activation error

  Two days ago, I installed windows server 2012 on my PC... It has been corrupted because of virus on my USB key that I reinstalled it twice but both times, it has been corrupted... when I installed it third time Activation has failed, it is said that this product code was used on another pc... no activation now please help me... and one thing I've never done any material change

  Try the phone activation, you may have to do during the week:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Problems installing OBIEE11.1.1.9.0 on MS Windows Server 2012 SP2

  Hello Experts,

  We install OBIEE11.1.1.9.0 on MS Windows Server 2012 SP2. He was installing (install the business - create a new BI system) smoothly, but in the last configuration Page progression at 27%, he was stuck. In accordance with the recommendation of oracle.

  It is a problem with WebLogic Server installation on Windows 2012 R2. That is documented in the unpublished bug 16844206 WLST IMPOSSIBLE GET ENV ON WINDOWS SERVER 12 WITH ENV MINIMAL

  MDG action plan-
  

  Install Java 1.7.

  Installation of WebLogic Server 10.3.6.

  Patch WebLogic Server with Patch 16844206 .

  Perform a software installation of OBIEE 11.1.1.9.0.

  Configure OBIEE

  
  

  Following the same thing we did it-

  (a) installed weblogic 10.3.6

  (b) Dowbloaded the patch and ran GUI and command line.

  
  

  1. When was held from the GUI

  Downloaded Patch_16844206. copied the content of this file zip, except the file Readme in your cache directory SmartUpdate (MW_HOME/utils/bsu/default cache_dir). Ran the bsu.cmd file located in the folder WM_HOME/Middleware/utils/bsu to open the Smart Update utility Oracle - and then 'downloaded Patches' table ffound Patch Id SRSV Bug 16844206 and then clicked on apply.

  However after doing a "running Validation" popup appears and he is blocked for 90 minutes at this same position. (see screenshot)

  http://www.use.com/FonC8

  2. When ran from command line-

  
  

  D:\app\Oracle\Middleware\utils\bsu > bsu.cmd-prod_dir=D:\app\Oracle\Middleware\wlserver_10.3-patch_download_dir = D:\app\Oracle\Middleware\utils\bsu\cache_dir-statut = downloaded - discovers - verbose

  Exception in thread "Main Thread" means

  D:\app\Oracle\Middleware\utils\bsu > bsu.cmd-prod_dir=D:\app\Oracle\Middleware\wlserver_10.3 - patchlist = 23698-verbose - install

  Exception in thread "Main Thread" means

  
  

  Any solution?

  
  

  Thank you very much

  Benoit
  

  Hi all

  According to Oracle advises has resolved it as follows.

  It is a failure with OutOfMemory. Increase the memory allocated for the process of the bsu. Change the following line in bsu.cmd

  MEM_ARGS =-Xms256m-Xmx512m set

  TO

  Set MEM_ARGS =-Xms1024m-Xmx1024m

  Basically, you will need to open bsu.cmd in Notepad, and then change the setting above. And then again run. And it will work.

  Thank you very much

  Benoit

• Debugging in kernel mode on network problem Windows Server 2012 R2 or Windows 8.1 comments

  Hi all!

  I tried the kernel debugger of network installation of client Windows Server R2 2012 on article according to VMware Workstation 10.0.1:
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/hh439346 (v = vs. 85) .aspx

  But I can't connect to guest with WinDBG. I have set up bcdedit, restart and see that boot OS comments very slow.
  Then I run regedit, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kdnet and see that
  KdInitResultString value is 'InitializeNetwork could get the Ethernet address of the host debugger.".
  KdInitStatus value is "c00000b5".

  I tried:
  -change of hardware to 9 version
  -change the comments to e1000 Ethernet card
  -disable the DHCP (debugger comments must use APIPA)
  -change the type of connection (bridge NAT, host-only)

  and every time I get the error "Failure of InitializeNetwork get the Ethernet address of the host debugger.". Guest 8.1 Windows x 64 and x 86 Windows 8.1 I get the same result.
  But I can debug comments Windows Server 2012 and Windows 8 on network without any problems. Also I can debug Windows Server R2 2012 on Oracle VirtualBox network.

  Is this a problem of VMware Workstation? Anyone can debug comments WIndows Server 2012 R2 or Windows 8.1 on network in VMware Workstation?

  Thank you!

  Have you tried the Workstation Technology Preview July 2014? (https://communities.vmware.com/community/vmtn/workstation/vmware-workstation-technology-preview-2014) I think that this problem has been resolved.

• Problema al add UN nodo adicional al Cluster Windows Server 2012 con VMware Workstation 9 en

  Hola Buenas,

  Ante todo decir este are a Québec fallo he revisado y las responses in different los don't post han well para help me, good os.

  El caso are that I have 2 servers DELL PowerEdge R420 fisicos identicos, cada uno con ellos 3 VMs sober instaladas VMware Workstation 9. The first virtual machine are an image of Kerio control, a second virtual machine to Windows Server 2012 con dominio Controladora, is the third VM con WS2012're donde quiero crear el cluster con dominio usuario. ESTOS servidores knew vez esta una cabina data via iSCSI connected.

  Add tambien when performed the tests of validation led Cluster, todo lo tengo OK. El caso are so creo el cluster con el Nodo 1 y 2 Nodo (sugar Québec cada uno fisica Máquina distinta ellos y bajo mismo Dominio) me error UN da has the el crear hora cluster. In cambio, if creo el Cluster con este nodos if any to crea, pero el fallo viene a hora of connect UN nodo adicional (ya sea o 1 Nodo Nodo 2). Este fallo viene cuando el nodo TR checks are completely funcional in el Cluster, is is "pensando" y da fallo por tiempo sold.

  He revisado problemas similar y he visto that el antivirus can be una causa e caso no lo're are only aun no he wont any AV... There comprobado red devices (utilizamos 4, 2 iSCSI, 1 red LAN y otra heart rate), he desactivado los red el protocolo IPv6 devices, he probado connect los nodos con el Kerio Offline, el desactivado firewall of Windows, exportar components del registro TCPIP6, capture las conexiones iSCSI...

  El cluster is as en Máquinas Office instalacion del WS2012 y is ha hecho manera person, no mediante VMWare del injerto.

  Una nueva prueba as hoy he ha hecho sido realize el cluster 2 maquinas office in una misma Máquina física y to ha s con exito, pero cuando intento realize el 2 nodos cluster (2 machines virtual cada una fisica diferente Máquinas) cuando me da el error. Esto deduzco raiz Quebec are a VMware o red, no lo o problema se, he probado use tan solo 1 switch (infrastructure utilizaria 2), changing IPs, pero igual sigo as can be? contacts? Alguna especifica VMware config?

  El caso're llevo several days ago that don't con este problema y no se a what can deber, agradeceria muchisimo the the comunidad ayuda.

  MUCHAS Gracias

  Buenas

  Between 2 workstation are posible realize ese tipo configs of forma limpia.

  El problema're (sniffer lo of UN pones veras TR), Los nodos assume ip-spoofing y arp spoofing cuando salen por tarjeta of Red led host.

  Para hacer eso as pides, deberias workstation pasar an esxi.

  Saludos

• Cf11 install problem on WIndows server 2012 R2

  We have a new installation of windows server 2012 R2 with a new installation standard CF11 installed on the C drive. Everything is 64-bit. The CF Administrator site and the connection works fine.  cfm files will not upwards in the default directory, but IIS displays htm thin files.  CF Administrator works fine.

  Web server configuration tool will only show "None" in the box of the IIS Web Site.  The usual CGI, APS, etc. were installed on IIS.  IIS and CF11 have in fact been re-installed.  Manual run wsconfig.exe shows no errors.

  The problem is that any call to a model cfm results an error (html pages serve very well):

  Error HTTP 500.0 - internal server error

  The page cannot be displayed because an internal server error has occurred.

  Detailed error information:

  Module IsapiModule

  Notification ExecuteRequestHandler

  Manager cfmHandler

  Error 0x8007007f

  URL requested http://localhost: 80 / default.cfm

  Physical path C:\inetpub\wwwroot\default.cfm

  Can anyone give suggestions for troubleshooting?  No newspaper appears to show all information that helps.

  Solved the problem... it is not a problem of one CF but and especially an IIS problem...

  (1) remove IIS... including the inetpub directory... Remove extensibility .NET Server under the Application Development Manager inetpub misuse this... inetpub should be deleted.

  (2) restart

  (3) reinstall IIS and enable all the usual stuff, that is to say, CGI, ISAPI, .NET, ASP, WebSocket Protocol, etc. in the application development

  (4) restart IIS and CF

  (5) Web Server Config set to 'all '.

  60 restart IIS and CF

  The thing completely reinstall IIS and which is only done if you can delete the folder under the root of the drive-inetpub.

• HP Color LaserJet 4600 PS: Driver HP Color LaserJet 4600 PS printer Windows Server R2 2012 problem

  Hello team HP,

  We used the driver 32 bit printer "HP Color LaserJet 4600 PS" to write the PDF file using Acrobat Distiller in Windows server 2003 operating system.

  But now, we have migrated our production environment for Windows Server 2012 R2 64-bit operating system and using the 32-bit printer "HP Color LaserJet 4600 PS" driver in the operating system Windows Server 2012.

  Is the driver support 32 bit printer "HP Color LaserJet 4600 PS" Windows Server 2012 R2 64-bit operating system?

  If it is not supported then what printer driver will support the Windows Server 2012 R2 64-bit operating system?

  Help us to this problem as soon as POSSIBLE and its very high priority for us.

  Kind regards

  Gaudin. B

  Hello

  CLJ 4600 is not supported on Windows Server 2012. However, you can use HP Universal Print Driver (UPD) for print on CLJ 4600 of Win Server 2012.

  Here is a list of the printers supported with the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04324001#N106AD

  Specification of the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04380141

  Thank you

• Windows Server 2012 Foundation and SMB problems with older equipment

  Hello

  My problem would be resolved if I had Windows Server R2 2012 but I have Windows Server 2012 Foundation.

  This article describes the problem exactly: https://support.microsoft.com/en-us/kb/2896636

  But of course, the solution does work with my version of the server.

  Does anyone know if there is a similar fix available?  I got my hunting.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it