Cannot restart APEX after reboot

Similar Questions

• Windows asking to restart. After reboot, once again it ask forever

  This has happened several times since a few days, I studied the question and tried to common bugs, but none of them have worked. This prevent me to upgrade to windows 10. Help?

  Hi Daniel,.

  Thank you for visiting Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. What troubleshooting steps you have tried?
  2. Have you tried to start the computer in safe mode? Has been the result even?
  3. Do you receive a specific error message/code while restarting the computer?

  If you can not upgrade your system to Windows 10, I suggest refer you to the article mentioned below to upgrade your system to Windows 10 and see if this helps you to upgrade.

  Upgrade to Windows 10 for free

  In addition to this, I suggest to know system requirements and for that you can see the article mentioned below.

  Before installing

  You can also see the article mentioned below to downloaded 10 Windows on your computer.

  Download Windows 10

  You can also refer to article WIKI de Andre da costa provided below and see if it helps you to solve the problem.

  How to upgrade to Windows 10 8.1 for Windows or Windows 7 by using Windows Update

  Hope that the information provided is useful. Let us know if you have questions related to Windows, we will be happy to help you.

  Kind regards

• Cannot restart MacBook after starting Mac OS Sierra

  I have problems with the installation of Mac OS Sierra. It jammed last night at about 90%. I stop. This morning, I tried to start it without success. I then started with the command and R and choose to reinstall the software. This seemed to work, took forever, but when he resumed at the end of this process the small white obtained progress bar all the way to the end while it froze. I just talked to apple and told to try again, which I am. It took about 3 hours this morning. I checked my HD there are 117 GB of space. Another person had the same problem and managed to fix it?

  Start by holding down the command + R keys again if you can access the construction in utilities to check and repair if necessary startup disk, and then try to install the Sierra.

  On macOS recovery

• My computer crashed and after reboot, I lost all my saved passwords. How can I recover it?

  I was looking on a saved password when suddenly my computer crashed and restarted. After reboot I couldn't see the saved passwords.
  As a test, I saved a password and this password is displayed in the list of saved passwords, but all the others are still missing.
  How can I retrieve my saved passwords?

  Thank you!

  If the file has no valid data then you may not use this file.

  You can try if there is an earlier copy of the logins.json file.

  • Right click: properties > Previous Versions
  • http://Windows.Microsoft.com/en-us/Windows7/previous-versions-of-files-frequently-asked-questions

• Nodemanager does not restart managed server after reboot of the Linux operating system

  Running Linux 2.6.18, Sun JDK 1.6.0_14 and WebLogic 10.3, we have a functioning correctly nodemanager watch a single managed server. If I kill-9, the managed server, the nodemanager immediately triggers a new. If, however, restart us the box, the nodemanager will start cleanly and does not start the managed server. He seems to believe the node should be kept low and indicates its status UNKNOWN.
  
  I saw where is a problem known on Windows boxes, easily worked around by providing the Xrs setting - for the start settings for the managed server. (Section 5 of the config doc General nodemanager.) I do not, however, where there a just as clean solution for Linux.
  
  Things I've tried:
  + When I put the server for DEBUGGING, it shows no sign of a stop signal is received. It is dumping loads of cluster messages, etc., in the newspaper and then suddenly just log ends so he is going to die by kill-9. If the nodemanager works at this time, he might try to restart the managed server and save it somewhere as failed permanently.
  + The nodemanager saves only the INFO level and connects to evidence to decide to leave the node down. (DEBUGGING is an invalid LogLevel, so that's all I have.)
  + A signal to restart sent our AdminServer (on another Linux machine) begins the node managed through the nodemanager. Nothing unusual happens or is connected.
  
  I'm curious to see things:
  + Is it possible to see what state the nodemanager believes the managed server to be?
  + Is there some value in some doc somewhere who could tell that the server does not have to be restarted?
  + Y at - it is not an action of customer NodeManager log? I see nothing in domain.log or AdminServer.log except when the NM is down.
  
  Thank you
  
  Kevin
  
  ListenPort = 5556
  ListenBacklog = 50
  SecureListener = true
  AuthenticationEnabled = true
  NativeVersionEnabled = false
  CrashRecoveryEnabled = true
  JavaHome = / appl/java/jre
  StartScriptEnabled = false
  StopScriptEnabled = false
  StartScriptName = startWebLogic.sh
  StopScriptName =
  LogFile=/appl/bea/wlserver_10.3/common/nodemanager/logs/nodemanager.log
  LogLevel = INFO
  LogLimit = 0
  LogCount = 1

  You can set NativeVersionEnabled to true. We have faced this in windows that was corrected by changing this property. A few notes on this program:

  Faced with this interesting question in Windows 2008 environment. Managed servers were lit by the Manager of knots and it was expected that a reboot of the system after a crash, the node Manager will restore the State of the managed servers in the State it was before the accident. Node Manager is configured to run as a windows service. As a result, he started after server restart. But individual managed servers were not start-up. Interestingly, for managed servers started by the Manager of the nodes there no .lck file in the folder/data / NodeManger.

  To resolve this problem always, set the following properties in the nodemanager.properties on the base of node maager directory.

  CrashRecoveryEnabled = true / * this default is set to false. This must be enabled for an automatic restart after accident at work * /.

  NativeVersionEnabled = true / * this is by default set to true, and it must be configured as such. If disable you this option on platforms for which weblogic provide JNI native libraries (for example in Windows 2008) then this custom create the .lck file and so node Manager cannot restart the server managed after the crash.

  Note: According to the documentation official .lck files are necessary for managers to auto restart weblogic node after system crash

  Official documentation:

  Once the system is restarted, Node Manager checks each managed domain specified in the nodemanager.domains file to determine if there are server instances were not stopped. This is determined by the presence of all the lock files that are created by Node Manager when a WebLogic Server process is created. This lock file contains the process identifier for the WebLogic Server startup script. If the lock file exists, but the process ID is not running, Node Manager will attempt to automatically restart the server.

  If the process is running, Node Manager performs an additional check to access the management running servlet in the process to verify that the process corresponding to the process ID is a WebLogic Server instance.

  Once the system is restarted, Node Manager checks each managed domain specified in the nodemanager.domains file to determine if there are server instances were not stopped. This is determined by the presence of all the lock files that are created by Node Manager when a WebLogic Server process is created. This lock file contains the process identifier for the WebLogic Server startup script. If the lock file exists, but the process ID is not running, Node Manager will attempt to automatically restart the server. If the process is running, Node Manager performs an additional check to access the management running servlet in the process to verify that the process corresponding to the process ID is a WebLogic Server instance.

  */

• Have been left in charge all night I get the message "after reboot requires the password" question is why is this automatic restart, and is this normal

  Have been left in charge all night I get the message "after reboot requires the password" question is why is this automatic restart, and is this normal

  Occasionally, it may restart because something was wrong. It is not a problem unless this happens frequently.

• Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?

  Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?

  You chose the option in iTunes to download the firmware first and install it in a second time after that?

• The mouse settings not saved after reboot/restart

  I'm changing the speed at which my mouse pointer moves on the screen.  I'm doing a 'demand' the change, and then click on 'ok '.   The point of the mouse moves faster in the game.  Then after reboot/restart the computer, the mouse setting is default slower movement speed.   The changes are not saved after reboot.   What keeps the change of speed of movement of the mouse to be saved?

  Mr. Brian,

  Please, try the following steps.  This should allow you to keep all the settings in the SetPoint software at the same time to solve your problem.

  1. click on the Start ORB, type msconfig in the Search box and hit Enter
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
    2. in the System Configuration dialog box, click the Startup tab
  3. Locate the entries called KHALMNPR or similar and uncheck the box next to them (there may only be a)
  4. click OK and restart your computer
  5. after reboot, change the speed of your mouse pointer and restart

  This should solve your problem.  Please let us know.  Thank you.

  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Setting advanced system not saved after reboot/restart

  I changed my settings of performance... then when I restart my computer... the computer is always the same as the front... I use a standard account... when I went to the administrator, it works... I want to change my standard user performance parameters. :'(

  Hi Erik,

  Using the standard user account to change settings?

  If you are connecting with a standard user account and then try to change the system of advance parameters he will automatically restore to the default settings after reboot, due to the user account permission.

  Note: If you want to change the advance system settings you must change the settings using the account administrator only.

• Cannot restart after failure of the accident or the power

  I have two Sandisk Ultra II 240 GB SSD and this has happened at a time using Windows 7 and Windows 10. Basically if my laptop is not closed properly - off without shutdown or restart, the laptop completely failed to restart Windows. This has happened on Win 7 and 10, but at least 10 gave me an error message with an error Code 0 x 0000185 and something abut my MSConfig being unreadable file or something. Whenever I have to wipe the hard drive and reinstall Windows and watever I do, this happens again and again and cannot restart the computer. Is this a bug? I tried this with a total of three different Sandisk Ultra II SSD and it happens over and over again. Help?

  Hello

  This could be related to any other equipment that you use on the specific computer, so my suggestion would be to try one of the disks on another computer to see if the problem is in the car.

• Task Scheduler loses credentials after reboot

  I have intalled Vista Basic and I have two scheduled tasks that run each night.  I chose properties to allow tasks to be performed weather a user is logged on or not.  After the establishment of the task and entering the appropriate information, the task will run successfully until the computer is restarted.  When the machine restarts, it loses the credentials.  I have to re-enter the password and the things until the next reboot.

  The task will run with administrator priviliages and it must have a password.  That last one is 99% of the time recorded in the system is simply a user with limited access to resources.

  How can I get Windows to remember the password after a reboot?  I created a separate just account to perform tasks and it always fails.  I thought about allowing the normal user account tasks but I don't want to give the privileges to perform a task that porbably right will fail when a reboot is happening anyway.

  I searched the internet and this seems to be a regular with no official word from Microsoft occurrence, if it is a 'function' or a 'bug '.

  Have a task scheduler that cannot hold passwords after a restart seems a bit pointless.  I wouldn't have to buy another program just to run tasks when Windows Vista has a superior program integrated in the operating system.

  Did somebody solve this problem?  Autour or get Vista work in fact save the password after a reboot.

  Hi HippieFee,

  This is normal. Please see the following KB for more information: http://support.microsoft.com/kb/931711/en-us

  If you do not want to see that this functionality has changed in future versions of Windows, visit the connect.microsoft.com/.

  Thank you for using Microsoft Answers!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Ping IP of ESXi host fails after reboot? Newbie

  VMWare ESXi 4.0.0 ReleaseBuild 171294 - HP ProLiant DL360 G4

  The server turned craps so we got a used that even make and model and shared disks.  Now we cannot connect with the customer and we cannot ping, ping times out.  When we ping from the console we get inconsistent results, can ping ok, the first IP addy and then fails on the second ping, or it connects to the second IP addy, but fails to ping first that it resolve the hostname constantly.  We stopped and started the management network and Management Agents a couple of times but no joy.

  I have the Articles KB 1008446 ping to the ESXi host IP fails after reboot, 1003490 restart the Management Agents on an ESX or ESXi Server and 1003677 Tech Support Mode of emergency support.

  What must we do to recover the server to an operational state? If there is other information needed to help us please let me know.

  And, what distro and version is ESXi 4.0.0 inspires?  I read that it is Redhat, but I couldn't find the version.

  I have worked with Soloris, Linux and Aix over the years, so I am comfortable working from the cmd line if need be.

  Thank you

  ESXi is not Linux. The VMkernel is VMware. The small console that runs the VMkernel is busybox. ESX has a VM management based on RedHat 5, but here again the VMkernel is all VMware.

  I would check that the embedded NICs are working properly. Start with a linux rescue disk and test.

  If all extracted would reset the system configuration from the yellow Console screen. Your configuration will be lost, but your machines virtual etc. will be OK. You will need to add to the inventory.

• CRS does not come after reboot the server in Oracle11g r2 11.2.0.1.0

  Dear Oracle gurus
  
  Our platform:
  ORACLE11G r2 RAC/GRID 11.2.0.1.0
  ReadHat Enterprise Linux5.3 64-bit
  
  
  RAC - 2 NŒUD
  [root@xyz-ch-aaadb-02 evmd] # /u01/app/11.2.0/grid/bin/crsctl check crs
  CRS-4638: Oracle high availability Services is online
  CRS-4535: cannot communicate with Cluster Ready Services
  CRS-4530: communication failure communicating with Cluster Synchronization Services daemon
  CRS-4534: can not communicate with the event Manager
  
  RAC - 1 NŒUD
  [root@xyx-ch-aaadb-01 crsd] # /u01/app/11.2.0/grid/bin/crsctl check crs
  CRS-4638: Oracle high availability Services is online
  CRS-4535: cannot communicate with Cluster Ready Services
  CRS-4530: communication failure communicating with Cluster Synchronization Services daemon
  CRS-4533: Event Manager is online
  
  RAC - 1 NŒUD
  crsd.log
  2011-08-21 00:35:27.913: [CSSCLNT] [3047883232] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:35:27.913: clsssInitNative [CSSCLNT] [3047883232]: connection failed, rc 29
  2011-08-21 00:35:27.914: [CRSRTI] [3047883232] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  2011-08-21 00:35:28.915: [CSSCLNT] [3047883232] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:35:28.915: clsssInitNative [CSSCLNT] [3047883232]: connection failed, rc 29
  2011-08-21 00:35:28.916: [CRSRTI] [3047883232] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  RAC - 2 NŒUD
  crsd.log
  
  2011-08-21 00:38:52.225: [CSSCLNT] [3198087648] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:38:52.225: clsssInitNative [CSSCLNT] [3198087648]: connection failed, rc 29
  2011-08-21 00:38:52.225: [CRSRTI] [3198087648] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  2011-08-21 00:38:53.228: [CSSCLNT] [3198087648] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:38:53.228: clsssInitNative [CSSCLNT] [3198087648]: connection failed, rc 29
  2011-08-21 00:38:53.228: [CRSRTI] [3198087648] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  Please help solve the problem.
  Let me know if you required information.
  
  Concerning
  Hitesh Gondalia

  hitgon wrote:
  We correctly the required permissions and ownership changes before we install the RAC.
  But after restarting the server.

  Please find the required papers.

  [root@xyz-ch-aaadb-01 ~] # ls-l/dev/sd *.
  BRW - r - 1 root disk 8, 0 21 August 00:20 / dev/sda
  BRW - r - 1 root disk 8, 1 Aug 21 0020: / dev/sda1
  BRW - r - disc 1 root 8, 2 21 August 00:20 / dev/sda2
  BRW - r - 1 root disk 8, 3-21 August 00:20 / dev/sda3
  BRW - r - 1 root disk 8, 4 August 21, 00:20 / dev/sda4
  BRW - r - 1 root disk 8, 5 August 21, 00:20 / dev/sda5
  BRW - r - 1 root disk 8, 6 August 21, 00:20 / dev/sda6
  BRW - r - 1 root disk 8, 16, 21 Aug 00:20 / dev/sdb
  BRW - r - 1 root disk 8, 32 21 August 00:20 / dev/sdc
  BRW - r - 1 root disk 8, 48 21 August 00:20 / dev/sdd
  BRW - r - 1 root disk 8, 49-21 August 00:20 / dev/sdd1
  BRW - r - 1 root disk 8, 64 21 August 00:20 / dev/sde
  BRW - r - 1 root disk 8, 65 21 August 00:20 / dev/sde1
  BRW - r - 1 root disk 8, 80 21 August 00:20 / dev/sdf
  BRW - r - 1 root disk 8, 81 21 August 00:20 / dev/sdf1
  BRW - r - 1 root disk 8, 96 21 August 00:20 / dev/sdg
  BRW - r - 1 root disk 8, 97-21 August 00:20 / dev/sdg1
  BRW - r - 1 root disk 8, 112 21 August 00:20 / dev/sdh
  BRW - r - 1 root disk 8, 113 21 August 00:20 / dev/sdh1

  [root@xyz-ch-aaadb-02 ~] # ls-l/dev/sd *.
  BRW - r - 1 root disk 8, 0 21 August 00:20 / dev/sda
  BRW - r - 1 root disk 8, 1 Aug 21 0020: / dev/sda1
  BRW - r - disc 1 root 8, 2 21 August 00:20 / dev/sda2
  BRW - r - 1 root disk 8, 3-21 August 00:20 / dev/sda3
  BRW - r - 1 root disk 8, 4 August 21, 00:20 / dev/sda4
  BRW - r - 1 root disk 8, 5 August 21, 00:20 / dev/sda5
  BRW - r - 1 root disk 8, 16, 21 Aug 00:20 / dev/sdb
  BRW - r - 1 root disk 8, 32 21 August 00:20 / dev/sdc
  BRW - r - 1 root disk 8, 48 21 August 00:20 / dev/sdd
  BRW - r - 1 root disk 8, 49-21 August 00:20 / dev/sdd1
  BRW - r - 1 root disk 8, 64 21 August 00:20 / dev/sde
  BRW - r - 1 root disk 8, 65 21 August 00:20 / dev/sde1
  BRW - r - 1 root disk 8, 80 21 August 00:20 / dev/sdf
  BRW - r - 1 root disk 8, 81 21 August 00:20 / dev/sdf1

  
  BRW - r - 1 root disk 8, 96 21 August 00:20 / dev/sdg
  BRW - r - 1 root disk 8, 97-21 August 00:20 / dev/sdg1
  BRW - r - 1 root disk 8, 112 21 August 00:20 / dev/sdh
  BRW - r - 1 root disk 8, 113 21 August 00:20 / dev/sdh1

  Concerning
  Hitesh Gondalia

  Hello

  Permission vote drive and the drive to vote changed after the reboot. sustain the permissions and ownership of roc and drive to vote even after reboot. check out this storage admin, they should be able to do.
  After this test restart again and see the result

  Hope this helps

  See you soon

• Not ready external hard drives after reboot

  You have a weird question, or perhaps I should say one on that I can't find something. I've dealt with it for years and finally had enough of it. Rarely, I restart my Mac, do not need, is not something that happens often. But on the question.

  I have an iMac of 2015, internal SSD, or merge, I suppose, and a couple of external hard drives attached. Both are 4TB readers, by USB (for backups) and FireWire (for data, applications, iTunes library, photos, etc.). Both work perfectly during normal use.

  The question is when I reboot. My hunch is that these external drives are not fill their mental health checks / faster the drive internal system files, and when the OS is logged in, all the stuff on my external drives (in this case, my iTunes library) is not found. Of course, everything I do is point iTunes to the external drive and everything is fine (well, that and tell him where to find my wallpaper because it doesn't by default mountain landscape photo!).

  So I'm wondering - is there a way to delay the start of the BONE or the final control until external drives are online? Not a huge problem, but why not. I'm tired of fixing stuff when I reboot. Or else, is something to not configured right and the cause? Hmm.

  What do you say?

  Try to connect the external disk after reboot completed if he could climb.

• Can't use Firefox once after reboot my Mac, then he won't.

  After reboot or a total, followed by the setting stop running, I get use of Firefox. Once I close out of it, I can't hire back in.
  I checked and updated Firefox, no help. I am currently running Yosemite on my Mac.

  I tried a Force Quit on Firefox. Notice that the small point under the Firefox icon is missing. So, I then clicked on the Firefox icon and it has jumped up and down. Alto! I can now engage Firefox without having to restart my computer. So does that mean Firefox did not leave on its own? And why all of a sudden start. Inquiring minds. If with that I seem to be OK once more. How weird.