The mouse settings not saved after reboot/restart

Similar Questions

• Pavilion: the mouse settings not saved upon restart

  Just bought a brand new HP Pavilion with windows 10 for £400. I'm about to return to the store unless someone can help me solve the reason for which the mouse for the touchpad settings will not save after reboot. Help, please.

  @C17

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

  Kind regards

  DP - K

• Setting advanced system not saved after reboot/restart

  I changed my settings of performance... then when I restart my computer... the computer is always the same as the front... I use a standard account... when I went to the administrator, it works... I want to change my standard user performance parameters. :'(

  Hi Erik,

  Using the standard user account to change settings?

  If you are connecting with a standard user account and then try to change the system of advance parameters he will automatically restore to the default settings after reboot, due to the user account permission.

  Note: If you want to change the advance system settings you must change the settings using the account administrator only.

• Keyboard and the mouse does not work after the release of sleep

  Original title: error keyboard and mouse

  After you have installed Windows 8 I had problems with the keyboard and the mouse.

  If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,

  I can not connect and I have to restart my computer to the power button.

  How can I avoid this problem? It happens every day at least once.

  Hello

  1. you are using a wired keyboard or mouse and wireless?
  2. What is the brand and model of the PC?
  3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?

  I suggest you follow these methods and check if it helps.
  
  

  Method 1:
  If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.

  (a) press the Windows logo and X from the keyboard.
  (b) type devmgmt.msc , and then press ENTER.
  (c) expand Bus USB controllers.
  (d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (e) restart the computer and reinstall the USB controllers.
  (f), check the question;

  
  Method 2:

  The 'USB selective suspend settings' option in the Power Options can be activated.

  (a) press X and WWindows logo and choose Power Options
  (b) click on change plan settings for the selected power plan
  (c) click on that to change advanced power settings
  (d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
  (e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.

  Method 3:
  If this does not help, I suggest to change the power to its default settings and check if it helps.

  You can follow the steps to do this:

  (a) press the Windows logo key and X set and choose power options.

  (b) under the preferred plans, click on balanced (Recommended).
  (c), click Change Plan settings and more balanced (Recommended) option.
  (d) click on restore default settings for this plan on .
  (e) click Yes to save the changes.

  Now check the issue.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

• Windows 7 - default gateway not saved after reboot

  I've seen this problem on different OS MS but you have not yet found my solution. After I reboot, I have to go to 'Advanced TCP/IP settings' and add the default gateway. It works until I have restart and disappears. Why isn't the bridge kept default resets, why it persists if long, what should I do to solve this problem, if anyone has any ideas?

  It just happened for me to add that I'm jusing static IP, no DHCP, that is not an option. Once I put the default gateway, I have no problem for the days/weeks until what I restart, then I have to dig down to set again.

  Divya, I fixed it. There is a blank line in the registry after the recent system update, which apparently happened before. Here's how:

  Solution for the bug of Vista SP2 gateway:
  1. open the registry, regedit.exe
  2. go into the path: HKLM/System/CurrentControlSet/Services/Tcpip/parameters/Interfaces.
  3. here you must select the CLSID of your network card when you change the settings. You'll probably recognize it watching the IPAddress value which will have IP address for this adapter.
  4. open the value 'Passerelle_par_defaut' of doubleclicking it. You will see a list of all the bridges that disappeared! (maybe in your case it will be single, in my case it was because of the many test multiple addresses) Most likely, the first line will be empty. I don't know how this little flaw can be a big problem. However, if you manually delete the first empty line, click OK and restart your system, everything should be working again fine.

  Things has worked well up until the last system update that adds this old problem this old problem in the system.

• the mouse does not work after a beep

  I currently have Windows 7 installed on my desktop at home.
  Lately I had problems with the mouse. When I start windows, it seems to work very well. After a few minutes, I hear a strange beep & the mouse no longer works in total. I tried to disconnect & reconnected again to see if there is no dust collected but that doesn't seem to work. I checked if the drivers are updated, I saw that the latest version of the driver has been installed. I checked if there is a problem with the ports. I started in safe mode. Uninstalled ports & restarted my computer. For worms, it seems to work fine, but now it seems I have the same problem again. For this reason, it is necessary to reboot the machine again & again once because the mouse freezes & I'm stuck here.

  Help, please

  Hello

  ·         The mouse works fine with other computers?

  ·         Did you make any changes before the show?

  ·         How is it connected to the computer (wired or wireless)?

  ·         What is the number and model of the mouse?

  Method 1:

  If it is connected by USB, I suggest you try to login via the different USB port and check if the problem persists.

  You can also run the hardware and devices Troubleshooter and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I also suggest you to start in safe mode and check if the mouse is working properly. To start in safe mode follow the below link;

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 3:

  If in safe mode mouse works fine, I also suggest you to place the computer in a clean boot and make sure that the third party software that is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: Make sure that when you have completed troubleshooting set the computer to a normal startup by following step 7 from the link above.

• Keyboard and the mouse do not work after upgrade to Windows 7.

  The operating system on this computer is Windows 7 Professional (64 bit), and the following updates are available:

  MS Security Essentials:
  Update for Microsoft Security Essentials - 4.7.205.0 (KB2994766) - Important

  Windows 7:
  Cumulative Security Update for Internet Explorer 11 for Windows 7 for systems based on the x 64 (KB3021952) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3004361) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3004375) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3013455) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3023562) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3029944) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3031432) - Important

  Update for Windows 7 for x 64-based systems (KB3004394) - recommended
  Update for Windows 7 for x 64-based systems (KB3020338) - recommended
  Update for Windows 7 for x 64-based systems (KB3021917) - recommended

  X 64-February Windows malicious software removal tool (KB890830) 2015 - Important

  The problems begin after that I installed these updates. After restarting the computer, I can no longer use my (HP SK - 2506 U) keyboard and mouse (Microsoft Wheel Mouse Optical). I have looked around through the forums and tried several suggestions; However, none have them worked, that's why I post here.

  For example, here are the methods that I've tried so far, while using a PS/2 keyboard connected:

  (1) to start the computer in safe mode only to find out that they keyboard and mouse don't always work.

  (2) went in mode Bios and the keyboard works until I leave.

  (3) Microsoft Fix It tool I tried for USB devices and he said that "the changes have been made", but it does not solve the problem.

  (4) I went to the Control Panel, type "Troubleshoot" > find and fix problems > material and audio > configuration of a device, and he says: "material changes may not have been detected."

  (5) download the drivers on their site, but they will not be installed because 'the latest version is already installed. "

  6) going to remove each USB root hub in Device Manager, and then restart the computer to reinstall the drivers. The computer recognizes the 'new' devices,
  but then fails to install. Also, when I check their error on each of the USB status then in Device Manager, I get an error (code 52).

  (7) I also tried to install an update, restart the computer and then install the update next to try to reduce down which one is causing the problem. However, this method does no more work. For example, I installed an update, then restarted the computer, and it would be nice. Then install the next update, and the problem would come back. I would therefore restore to a point earlier, thinking that the second update has been the cause of the problem only discover that the problem came back after first re-installation...

  I also tried to run a backup of my external hard drive, but it does not work. I also tried to create a system repair disc, and it fails too.

  So far, the only way I can "fix" this problem is if I restore my computer to an earlier point in the day and then hide all updates to install automatically.

  Now I'm wondering if anyone knows why these problems are happening or fix them for good?

  Hi Floyd,

  I appreciate the efforts that you have taken to solve the problem in a few important steps. Since it is a problem that occurs when you try to install updates for Windows, the driver may be signed or corrupted.

  Just a few questions in order to get a clear picture of the issue.

  1. make all the windows updates installed successfully?

  2. What is the full error message you see in Device Manager?

  Follow the thread and check them off below if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-code-52-USB-ports-not-recognizing-connected/2379017c-D513-478C-A184-0d1b7cd408b2?page=1&TM=1424751616733

  I MPORTANT this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  If the problem is not resolved, you can put the computer in a clean boot and check if it helps.
  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135
  Note: after the boot minimum troubleshooting steps, see how to reset the computer to start as usual after a clean boot troubleshooting.

  Get back to us if the problem persists.

• the proxy settings not detected after automatic update

  Following automatic updates on Thursday, I can access is the web.  About Network Diagnostics for Windows, the message error is 'Windows could not automatically detect the network proxy settings '.  I don't see that I have all the proxy settings...  I have a HP Desktop PC HP P6-2260, and I use Windows 7.  It works OK if I do a system restore - but I don't want to have to do one of these whenever I go on the computer.  Any suggsestions?

  Thanks Jaco.  I had a good overview of the updates that have been the cause of the problem.  Many of them related to security, so I checked my security software, and after execution of updates it y it has solved the problem - microsoft updates must have been clashing with updates of security in a way.

• The mouse does not work after I restored the IBM thinkpad to the factory setting.

  I have an IBM thinkpad with win XP. I restored it back to factory setting. But I couldn't use the mouse more.

  spike88,
  If it's a brand mouse, you may need to consult the manufacturer for all drivers that may be required.  If it's a USB mouse then try another port.  You can also update Windows, and then test the mouse.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pav Notebook: Parameters of Synaptics Mousepad not saved after reboot with Win10

  Hi all--nine of these forums. I find that my settings are lost whenever I have reset my laptop for the Synaptics touchpad options scroll mouse, which means I have to be forever just put the laptop to sleep, or reset the settings when you restart. A minor annoyance but when shell out you for a new phone, you expect the basic options to actually work.

  No idea how to fix this? Apart from the very disappointing performance, it is my only complaint for the product

  Hello

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

  Kind regards

  DP - K

• Scan of the computer is not activated after reboot

  I have an Officejet 7500 a wireless connected to my network. A Windows XP system installed the management software. I have activated the service computer scan and it works very well. However, the XP system shuts down every night and when it is restarted the computer scanning function is NOT active.

  Is it possible to activate computer scan automatically when the XP system starts? It's a pain in the neck having to open the management console and activate it manually every day.

  Thank you.

  Hello

  Have you installed the latest version of the software from the website or used the original software?

  The eralier indeed requested software to allow scanning to computer restarting the PC, the latest version of the software allow however to paramantly.

  If you have the original software (can be identified by its black background) uninstall by clicking programs > HP > Officejet 7500 a > Uninstall.

  Then download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109374-2&cc=us&DLC=en&LC=en&OS=228&product=4083652&sw_lang=

  Shlomi

• The mouse will not scroll after the clean boot

  Hello!

  I just had perform a clean boot, because I had problems to connect to the internet, but after that (and re - start Windows normally later) my touchpad doesn't let me scroll upwards or downwards. It's as if this feature has completely disappeared. What can I do about it?

  I use Windows 7 on a Toshiba Satellite C855 - 10 p.

  Thank you!

  You may have inadvertently disabled the software Toshiba Touchpad controller.  You could go back to MSCONFIG to check if it is listed.  Or you may need to download again on the Toshiba site.

  You can also use system restore to restore the registry in how it was previously (in recent days).  Learn how on this in the option #1 here.

• Wireless mouse does not work after update Vista graphics driver

  Hey whats goin' I'm looking for a little help here Irecently downloaded a new graphics driver on my laptop and rebooted... suddenly all OOF, mouse not working anymore... What do I do?

  * original title - my wireless mouse died after I downloaded a driver what should I do? *

  Hello

  The video driver may be accessory to the mouse does not.

  Reboot again. If the mouse still does not work, check the batteries in the mouse and receiver
  connection. To the need to update or reinstall the mouse drivers - check with Microsoft Hardware, LogiTech
  or anything done to the mouse for the latest drivers.

  ==================================================================

  If this seems to be a USB problem AFTER the foregoing:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Deploy and host not applied after you restart car profiles

  Just started playing with Auto deploy and profiles of the host, all of this work have to expect one thing.

  The profile of the host is not applied after you restart, the profile is selected but not applied.

  If I choose 'Apply the profile' Server applies the profile, take this into maintenance mode and it works as it should.

  This should not happen automatically after reboot? And what files newspapers can I look to fix this?

  Any help would be appreciated.

  Yes. You can attach a profile - even if the host is a host running VMs - worms and you can take a look if it is already compatible or not, before it is put in maintenance mode and apply the profile settings. You can even attach a profile to a cluster if you do not need to click on all hosts.

• Bluetooth mouse does not work after the mode 'sleep'.

  My Logitech bluetooth mouse Mouse loses communication after coming out of sleep mode.  The mouse does not appear in the devices Panel and will not resync.  To retrieve it, I have to restart, and then remove the bluetooth devices control panel mouse and then add the device again.

  When installing Win7, he acknowledged the mouse without having to manually provide the drivers.  I checked the Logitech website, which doesn't have to download disponibilitepour drivers win7.

  The question is not limited to the mouse as a bluetooth speaker system has similar problems with sleep mode.

  Someone knows how to solve the problems of Eve Win7 bluetooth?

  John
  System: Computer laptop Dell M1330, mouse Logitech V470 bluetooth, Win7-64 Edition home premium

  For the mouse in the right mouse click Device Manager, select properties then power management and disable the setting allow turns off to save power.

  For other devices, check the equivalent power management settings.