Setting advanced system not saved after reboot/restart

Similar Questions

• The mouse settings not saved after reboot/restart

  I'm changing the speed at which my mouse pointer moves on the screen.  I'm doing a 'demand' the change, and then click on 'ok '.   The point of the mouse moves faster in the game.  Then after reboot/restart the computer, the mouse setting is default slower movement speed.   The changes are not saved after reboot.   What keeps the change of speed of movement of the mouse to be saved?

  Mr. Brian,

  Please, try the following steps.  This should allow you to keep all the settings in the SetPoint software at the same time to solve your problem.

  1. click on the Start ORB, type msconfig in the Search box and hit Enter
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
    2. in the System Configuration dialog box, click the Startup tab
  3. Locate the entries called KHALMNPR or similar and uncheck the box next to them (there may only be a)
  4. click OK and restart your computer
  5. after reboot, change the speed of your mouse pointer and restart

  This should solve your problem.  Please let us know.  Thank you.

  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 - default gateway not saved after reboot

  I've seen this problem on different OS MS but you have not yet found my solution. After I reboot, I have to go to 'Advanced TCP/IP settings' and add the default gateway. It works until I have restart and disappears. Why isn't the bridge kept default resets, why it persists if long, what should I do to solve this problem, if anyone has any ideas?

  It just happened for me to add that I'm jusing static IP, no DHCP, that is not an option. Once I put the default gateway, I have no problem for the days/weeks until what I restart, then I have to dig down to set again.

  Divya, I fixed it. There is a blank line in the registry after the recent system update, which apparently happened before. Here's how:

  Solution for the bug of Vista SP2 gateway:
  1. open the registry, regedit.exe
  2. go into the path: HKLM/System/CurrentControlSet/Services/Tcpip/parameters/Interfaces.
  3. here you must select the CLSID of your network card when you change the settings. You'll probably recognize it watching the IPAddress value which will have IP address for this adapter.
  4. open the value 'Passerelle_par_defaut' of doubleclicking it. You will see a list of all the bridges that disappeared! (maybe in your case it will be single, in my case it was because of the many test multiple addresses) Most likely, the first line will be empty. I don't know how this little flaw can be a big problem. However, if you manually delete the first empty line, click OK and restart your system, everything should be working again fine.

  Things has worked well up until the last system update that adds this old problem this old problem in the system.

• Pav Notebook: Parameters of Synaptics Mousepad not saved after reboot with Win10

  Hi all--nine of these forums. I find that my settings are lost whenever I have reset my laptop for the Synaptics touchpad options scroll mouse, which means I have to be forever just put the laptop to sleep, or reset the settings when you restart. A minor annoyance but when shell out you for a new phone, you expect the basic options to actually work.

  No idea how to fix this? Apart from the very disappointing performance, it is my only complaint for the product

  Hello

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

  Kind regards

  DP - K

• Windows Update will not install after reboot required.

  Update of security for Microsoft Visual C++ 2005 Service Pack 1 (KB2538242).

  I'm running Windows 7 x 64.

  I have a Windows update that requires the closing down to install.   This is not, and after reboot, I have a slower computer.

  At this point, even removing the offending program would be useful.

  Thank you for your expertise.

  Hello

  Try the methods provided below and see if they help to resolve the issue.

  Method 1:

  In the case where you are not able to install specific updates then, try the troubleshooting provided in the link below steps to fix the problem.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 2:

  You can also try to reset the Windows Update components and check if that helps.

  Click on the link provided below for more information about resetting Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3:

  Start the computer in a clean boot state and then try to download the updates manually.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Download the updates manually from the link provided below.

  MFC Package security update Microsoft Visual C++ 2008 Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26368

  MFC Package security update Microsoft Visual C++ 2005 Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?ID=26347

  I hope this helps.

• My settings in windows are not saved after each stop

  Hi guys, I'm under 64-bit Windows 8. My settings are not saved after each stop, every time I start it tells me that I just installed Avast and IE is my browser by default when I chose Chrome previously. Arrangement of icons in my desktop reset after every start. Reliability Monitor shows that I have a lot of problems "Windows was not properly shut down", even if I stop my office in good and due form. Help, please.

  Hi Kelvin,

  Here are a few steps more you can follow:

  Step 1:

  I suggest you to activate the built Admin account.

  (a) press Windows and x key together on your desktop screen.
  (b) click on prompt (admin).
  (c) type: net user administrator /active: Yes

  Note: Follow the same steps and type net user administrator /active: no to disable the administrator account after the diagnosis is made

  After activating the administrator built-in, please try the steps below:

  Step 2:

  The built in Administrator account to create a new user account and transfer the profile data.

  Please follow the steps below to do so:

  (a) press Windows and x together and select Windows Explorer.

  angle b) click on the tab and click Options at the top right.

  (c) click the View tab, and then click on display the drives, folders and hidden files.

  (d) uncheck the box that says Hide protected operating system files.
  (e) click Yes to confirm, and then click on OK.

  (f) to find the C:\Users\Old_Username folder, where C is the drive on which Windows is installed, and the old username is the name of the profile you want to copy the files.

  (g), select all files and folders in this folder, except the following files:

  Ntuser.dat
  Ntuser.dat.log
  Ntuser.ini

  (h) right click and select copy.

  (i) find the C:\Users\New_Username folder, where C is the drive on which Windows is installed, and the new username is the name of the new user profile you created.

  (j) right click in the folder and select Paste.

  (k) restart your PC and check if the problem persists.

  Thank you.

• I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I think you're looking in the root folder not your home folder.   Tilde ~ in front of the first slash indicates the folder.

  Try this...

  Quit Safari.

  Open a Finder window. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  ~/Library/preferences/com. Apple.Safari.plist

  Click OK, and then move the com.apple.Safari.plist file to the trash.

  Restart Safari to test.

• Deploy and host not applied after you restart car profiles

  Just started playing with Auto deploy and profiles of the host, all of this work have to expect one thing.

  The profile of the host is not applied after you restart, the profile is selected but not applied.

  If I choose 'Apply the profile' Server applies the profile, take this into maintenance mode and it works as it should.

  This should not happen automatically after reboot? And what files newspapers can I look to fix this?

  Any help would be appreciated.

  Yes. You can attach a profile - even if the host is a host running VMs - worms and you can take a look if it is already compatible or not, before it is put in maintenance mode and apply the profile settings. You can even attach a profile to a cluster if you do not need to click on all hosts.

• When I close CS6 setting changes are not saved.  Restores the default settings on reopen.  Why?

  When I close CS6 setting changes are not saved.  Restores the default settings on reopen.  Why?

  Sorry Photoshop - problems resolved - I read the details - turns out you need to make changes not files opened for preferences apply to all files.

  Thank you, Al

• ASM does not start after you restart the system.

  OS = Linux 5
  Grid = 11 GR 2
  
  I've successfully installed grid for a stand-alone server. However, after I restarted the server and commissioning upward the clusterware (crsctl start has), I got the following error message when you try to start ASM
  
  sqlplus / as sysasm
  SQL > startup
  ORA-27154: post/wait create failed
  ORA-27300: OS dependent operating system: semget failed with status: 28
  ORA-27301: OS error: no space is available on the device
  ORA-27302: an error occurred at: sskgpsemsper

  kernel semaphore seems insufficient, increase last kernel.sem value in /etc/sysctl.conf and try to run to the top of the DSO.

  REF the link to follow the steps below:

  http://blog.ronnyegner-consulting.de/2011/04/11/ora-27154-postwait-create-failed-ora-27301-OS-failure-message-no-space-left-on-device-when-starting-ASM-or-database-instance/

• PXI chassis not found after reboot host

  I use a chassis SMU-1073, Win7 and Labview 12.0f3 on the host. After a restart of the host, MAX is unable to find the frame and I need to reboot the host. Rebooting usually works, but often it is necessary to power down of the PXI chassis too. It is very tedious and time-consuming. There must be a way to simply restart the driver (single) and set things right after a restart of the host. Thanks for your help!

  Hi bjuberchaub,

  Let's see what crossrulz has to say about the race condition, but the situation you have described above does not sound like a driver problem.

  Regarding "if I cycle power on the chassis and try to reconnect", we recommend strongly cyclical food your chassis when your computer is turned on.  It is the equivalent to remove a PCI (e) card on a desktop while it is running. It can cause permanent damage to your system.

  The reboot sequence appropriate must be:

  1. Turn off the power to the host
  2. Disable the chassis
  3. Turn on chassis
  4. Turn on the host

  Never do anything with your chassis power when your computer is turned on.

  Given that:

  1. I'd be interested to see what looks like your Windows Device Manager when the steps above are followed.  Do you see unknown devices?
  2. The LINK is clear on the chassis power?  Is what color?
  3. This configuration never before without this behavior?

  If I misunderstood your comment about cyclical diet and you just follow the steps I have outlined above, I would be interested in getting answers to questions 1 and 2 when your system is in a State of non-working (e.g. restart you computer without rebooting the chassis).

  Kind regards

• VIB not updated after the restart - ESX6

  Hello

  I have a strange problem while updating to ESXi600-201511401-BG on 1 of 3 guests. It seems that the fix is installed correctly, but it disappears on the next reboot.

  
  

  The commands I tried to help include, but none of them seems to work:

  esxcli software update /vmfs/volumes/path/Update/ESXi600-201511001.zip esx-base - d - n vib

  and

  Profile of esxcli update d software /vmfs/volumes/path/Update /ESXi600 - 201511001.zip - p ESXi - 6.0.0 - 20151104001-standard

  The result is:

  Message: The update completed successfully, but the system must be restarted for the changes to be effective.

  Restart required: true

  VIBs installed: VMware_bootbank_esx - base_6.0.0 - 1.22.3247720

  VIBs removed: VMware_bootbank_esx - base_6.0.0 - 1.20.3073146

  VIB list after installation check seems to be updated, but after the restart, he returned to the old version.

  All guests were built fresh at about the same time using the same media however, this server has a problem. By comparing each server the only difference in VIBs is VMware_bootbank_esx-base. Everything else is the same...

  Any help would be appreciated.

  Thank you

  Derek

  VMware technical support identified the error "MSI - X not supported by the device" in boot.gz and recommended to update firmware or try to reinstall. As the host was running the same firmware as the hosts who have been updated and not happy with the way recommended reconstruction of the host, I did some research in error.

  A bit of googling suggests that the error relates to USB interrupts, which lead me to realize that it was the only server currently connected to a 16 ATEN KVM (cables VGA/USB) port. After unplugging the KVM, I was able to apply successfully the update...

  If anyone else has this problem and has devices connected to USB ports, I would disconnect them and try the upgrade again.

• Installed printer uninstalled after reboot/restart of the computer

  During the last two weeks, I had to reinstall my printer (Kodak ESP3250) manually after every reboot/restart my computer running Windows XP with service pack 3. It's never happened before with the same printer and the same computer. I have made no changes to my computer during the period in question, except regular updates from Microsoft, can someone explain why it's happening and what I can do to stop it?

  Hello

  Follow these steps and check if that helps:

  Method 1:

  I suggest you try to update the latest drivers for the printer and check if it helps:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_drivers_install_updatew.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.

  For more information, see this link:
  http://support.Microsoft.com/kb/308028

  It will be useful.

• Windows 7 does not start after reboot.

  I did a fresh install of windows 7 ultimate. Setup was good, he began, updated, installed some drivers and software, tried to reload and bad news. Restarting stopped with a white screen where the startup screen should be. I turn off the cpu and no problems at windows startup. I tried several times and no luck. If the restart from the menu start, it stops at the empty screen. "I seek answers and possibly other charges was installing, disabled all updates and disconnected all the printers, speakers, etc." and again not luck. After that first start and the processor does not start after a reboot. It stays on with a blank screen and no response to keyboard... Help, please...

  I corrected this easy on my HP 7100

  Go to management, records and defined as being active, then fixed, make a right click on the partition with windows on them might have to boot windows disk and choose repair option 2 times I found on a model of friends. Anyway, problem fixed, now able to restart (warm start)

• CRS does not come after reboot the server in Oracle11g r2 11.2.0.1.0

  Dear Oracle gurus
  
  Our platform:
  ORACLE11G r2 RAC/GRID 11.2.0.1.0
  ReadHat Enterprise Linux5.3 64-bit
  
  
  RAC - 2 NŒUD
  [root@xyz-ch-aaadb-02 evmd] # /u01/app/11.2.0/grid/bin/crsctl check crs
  CRS-4638: Oracle high availability Services is online
  CRS-4535: cannot communicate with Cluster Ready Services
  CRS-4530: communication failure communicating with Cluster Synchronization Services daemon
  CRS-4534: can not communicate with the event Manager
  
  RAC - 1 NŒUD
  [root@xyx-ch-aaadb-01 crsd] # /u01/app/11.2.0/grid/bin/crsctl check crs
  CRS-4638: Oracle high availability Services is online
  CRS-4535: cannot communicate with Cluster Ready Services
  CRS-4530: communication failure communicating with Cluster Synchronization Services daemon
  CRS-4533: Event Manager is online
  
  RAC - 1 NŒUD
  crsd.log
  2011-08-21 00:35:27.913: [CSSCLNT] [3047883232] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:35:27.913: clsssInitNative [CSSCLNT] [3047883232]: connection failed, rc 29
  2011-08-21 00:35:27.914: [CRSRTI] [3047883232] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  2011-08-21 00:35:28.915: [CSSCLNT] [3047883232] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:35:28.915: clsssInitNative [CSSCLNT] [3047883232]: connection failed, rc 29
  2011-08-21 00:35:28.916: [CRSRTI] [3047883232] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  RAC - 2 NŒUD
  crsd.log
  
  2011-08-21 00:38:52.225: [CSSCLNT] [3198087648] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:38:52.225: clsssInitNative [CSSCLNT] [3198087648]: connection failed, rc 29
  2011-08-21 00:38:52.225: [CRSRTI] [3198087648] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  2011-08-21 00:38:53.228: [CSSCLNT] [3198087648] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:38:53.228: clsssInitNative [CSSCLNT] [3198087648]: connection failed, rc 29
  2011-08-21 00:38:53.228: [CRSRTI] [3198087648] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  Please help solve the problem.
  Let me know if you required information.
  
  Concerning
  Hitesh Gondalia

  hitgon wrote:
  We correctly the required permissions and ownership changes before we install the RAC.
  But after restarting the server.

  Please find the required papers.

  [root@xyz-ch-aaadb-01 ~] # ls-l/dev/sd *.
  BRW - r - 1 root disk 8, 0 21 August 00:20 / dev/sda
  BRW - r - 1 root disk 8, 1 Aug 21 0020: / dev/sda1
  BRW - r - disc 1 root 8, 2 21 August 00:20 / dev/sda2
  BRW - r - 1 root disk 8, 3-21 August 00:20 / dev/sda3
  BRW - r - 1 root disk 8, 4 August 21, 00:20 / dev/sda4
  BRW - r - 1 root disk 8, 5 August 21, 00:20 / dev/sda5
  BRW - r - 1 root disk 8, 6 August 21, 00:20 / dev/sda6
  BRW - r - 1 root disk 8, 16, 21 Aug 00:20 / dev/sdb
  BRW - r - 1 root disk 8, 32 21 August 00:20 / dev/sdc
  BRW - r - 1 root disk 8, 48 21 August 00:20 / dev/sdd
  BRW - r - 1 root disk 8, 49-21 August 00:20 / dev/sdd1
  BRW - r - 1 root disk 8, 64 21 August 00:20 / dev/sde
  BRW - r - 1 root disk 8, 65 21 August 00:20 / dev/sde1
  BRW - r - 1 root disk 8, 80 21 August 00:20 / dev/sdf
  BRW - r - 1 root disk 8, 81 21 August 00:20 / dev/sdf1
  BRW - r - 1 root disk 8, 96 21 August 00:20 / dev/sdg
  BRW - r - 1 root disk 8, 97-21 August 00:20 / dev/sdg1
  BRW - r - 1 root disk 8, 112 21 August 00:20 / dev/sdh
  BRW - r - 1 root disk 8, 113 21 August 00:20 / dev/sdh1

  [root@xyz-ch-aaadb-02 ~] # ls-l/dev/sd *.
  BRW - r - 1 root disk 8, 0 21 August 00:20 / dev/sda
  BRW - r - 1 root disk 8, 1 Aug 21 0020: / dev/sda1
  BRW - r - disc 1 root 8, 2 21 August 00:20 / dev/sda2
  BRW - r - 1 root disk 8, 3-21 August 00:20 / dev/sda3
  BRW - r - 1 root disk 8, 4 August 21, 00:20 / dev/sda4
  BRW - r - 1 root disk 8, 5 August 21, 00:20 / dev/sda5
  BRW - r - 1 root disk 8, 16, 21 Aug 00:20 / dev/sdb
  BRW - r - 1 root disk 8, 32 21 August 00:20 / dev/sdc
  BRW - r - 1 root disk 8, 48 21 August 00:20 / dev/sdd
  BRW - r - 1 root disk 8, 49-21 August 00:20 / dev/sdd1
  BRW - r - 1 root disk 8, 64 21 August 00:20 / dev/sde
  BRW - r - 1 root disk 8, 65 21 August 00:20 / dev/sde1
  BRW - r - 1 root disk 8, 80 21 August 00:20 / dev/sdf
  BRW - r - 1 root disk 8, 81 21 August 00:20 / dev/sdf1

  
  BRW - r - 1 root disk 8, 96 21 August 00:20 / dev/sdg
  BRW - r - 1 root disk 8, 97-21 August 00:20 / dev/sdg1
  BRW - r - 1 root disk 8, 112 21 August 00:20 / dev/sdh
  BRW - r - 1 root disk 8, 113 21 August 00:20 / dev/sdh1

  Concerning
  Hitesh Gondalia

  Hello

  Permission vote drive and the drive to vote changed after the reboot. sustain the permissions and ownership of roc and drive to vote even after reboot. check out this storage admin, they should be able to do.
  After this test restart again and see the result

  Hope this helps

  See you soon