Cannot run recovery CD on satellite because of the hacker attack

Similar Questions

• Satellite Pro L550 - 13 M - cannot run recovery of HD products

  I have a new Toshiba Satellite Pro L550 - 13 M running Windows 7 and I shot this morning and he says Windows could not start and went into the Startup Repair.

  The last thing I did with it was last night, when I ran RegistryBooster2 and it cleaned up the registry. I have used this utility loads of time with this and previous books and it has been fine. I guess that it caused the problem though. It backs up the registry, but I can't restore because I can't start!

  Thus, after reboot a few times, he finally said "Windows cannot repair this computer automatically. If I look at Diagnostics and repair details, the journal lists all these tests, but says that they have completed successfully. I'm on the 38 repair attempt. During one of them, Startup Repair says it was a registry problem.

  If I try to view advanced options for system recovery and select a UK keyboard, I get this message:

  "You must login to access the System Recovery Options."

  and my only option is to click an OK button to restart.

  So, I'm stuck.

  I had a Windows 7 recovery CD and Startup Repair running on who arrives without error!

  However, because the phone is so new, I did not create restore points or recovery discs (don't have any blank DVDs at the time).

  The laptop has a HARD drive recovery partition, but I can't launch the recovery disc to access this option because of the thing "you must login" above.

  I'm stuck! Anyone out there with any ideas?

  Additional details:

  Cannot start in safe mode. Last known good configuration does not work. All roads lead to the Startup Repair.

  38 attempt has this in the Startup Repair log:

  Root cause found:
  ----------------------------------
  Startup Repair tried several times but still not determine the cause of the problem.
  ----------------------------------

  Can I use the Windows 7 recovery CD to get a command prompt and show C: and D: (where recovery of HD files are), but I don't know what to do from there.

  The CD is not for a Toshiba, so it does not list HD recovery option. I can only use it to run the Startup Repair (which reported no problem) or get a command prompt.

  Install new OS instructions on http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm and you will have new factory settings. with the settings everything will be OK again.

  To use the same account of the connection and the password as in Win7 (if you have one).

• Satellite Pro U400 - WXP does not start & cannot run recovery is

  Help please!

  I tried running the recovery disc using the F12 key, I kept getting WARNING 'this HARD drive is not initialized' - initialize HARD drive & restart. are you sure you want to continue? I clicked on Yes-error F3e1000001 (HDD not not found) - I clicked on none he turned off the computer!

  I tried a different way by pressing the 0 im power on, because then I can no longer load window XP, it automatically runs 'Virtual disk Image', then by loading the tool recovery & followed the same HDD warning is not initialized & etc. and then eventually turn off the laptop itself!

  Please help if you can! Thank you!

  Hello

  I guess that your HARD drive is defective.
  The HARD drive is recognized in the BIOS?

  If this is not the case, replace the HARD drive and then try the recovery disk.

• Cannot install recovery image on Satellite C660

  Hello
  I tried to restore a Satellite C660 factory settings because it be extremely slow to start.

  Using the original Toshiba recovery disks the process gets to half way through and then gives the following messages...

  Error restoring image
  The device is not ready

  ERROR: ImageX could not be Win7 V:\HDDRecovery\SWImg\15489XSP.swm Index 2 HARD C: drive!

  If someone can advise?
  Thank you

  Unfortunately there is no workaround to force the recovery image installation runs correctly.
  All you can do right now is to set the BIOS to default settings and use the drive recovery again.
  Make sure that the disc is clean.

  Do you use the recovery disc for the first time?

• Cannot start Recovery on my Satellite A200-1N5

  I need help please

  I can't do the recovery of my Satellite A200-1N5.
  When the recovery DVDs starts is a message says that windows couldn't start .a recent hardware or software change might be the cause (and then I followed the instructions but no change coming)

  Best regards

  Thank you.

  Hello

  In my opinion recovery didn't start at all. Please, start your laptop and press the F12 key. Keep it down for a few seconds and the start menu appears. Choose the CD/DVD drive and press ENTER.

  If all goes well you'll hear running the CD/DVD drive and the activity on the screen.

• Cannot install recovery image on satellite Pro P300-1EX

  Hello.

  I have never had many problems with a single laptop in my lifetime of work. I'm almost ready to throw this thing out the window. I have a satellite pro p300-1EX.

  I wanted to do an install new os just to make things a bit faster for the customer, it was 8 hours ago.

  First, I installed a Home Windows OEM pre 32B version. Then I saw that the CD would not work.

  So, Okay - I'll bring back factory default:

  (1) there is no link repair starting and pressing F8
  (2) there is no HARD drive untilty when you press 0 - that does nothing
  (3) there is no recovery console, by putting in an OEM version of windows vista
  (4) I try to download recovery disk creator bloody software and get this - it does not work. It creates a shortcut to a file that's not here yet. TRDCLcher.exe, can you, im speechless.

  So now, I have to spend £30 of my own money by obtaining a disc sent to me? I don't think so.

  So, what can I please? It was a horrible experience. Nothing works. The recovery partition, I see is still in tact, it's just like the laptop doesn't recognize it. Instealing the OEM deleted all tools by default, but I can't NOT THE DOWNLOAD.

  Please, please help me.

  Thank you.

  Hello

  Maybe it sounds stupid now, but this is simply.

  Here's my explanation of how it works:
  Almost 4 or 5 years Toshiba offers laptops without recovery DVD but with recovery image stored on the HARD drive. As much I know about former Satellite/Satellite Pro P300 recovery image was recorded on the second partition of HARD drive in the folder named HDDRecvery. This model laptop was shipped with Windows Vista.

  As you know original recovery image can be installed n in two ways:
  -You can use the recovery HARD drive installation method - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
  -You can use the created recovery DVD disk

  HARD drive recovery facility can be made if the laptop has only factory settings. In this case in advanced startup options (F8), you will have the option to fix my computer. If the notebk has been installed with the version of the OS or any other operating system of this option won't be available more. Because of this Toshiba has preinstalled reminder with the message for owners of laptops create recovery DVDs.

  Your questions:
  > There is no link repair starting and pressing F8
  If this laptop doesn t have to factory settings it will not appear in the advanced startup options
  > There is no HARD drive untilty when you press 0 - that does nothing
  If you have European book this model with zero will not work. It only works with the United States and Austraian mobile.
  > There is no recovery console, by putting in an OEM version of windows vista
  I put t understand it. What happens when you start with the OEM version?
  > I am trying to download bloody recovery disc creator software
  If you have the European model of laptop, it can not be downloaded. This piece of software is included in the recovery image only.

  > So now I have to spend £30 of my own money by obtaining a disc sent to me
  I understand, but at least with the original recovery DVD you can install OS and all necessary things in an hour only.
  > The recovery partition, I see is still in tact, it's just like the laptop doesn't recognize it.
  Yes. Without factory settings you will not have access to these data.

  Follow these steps:
  -start your laptop and press F2 to enter the BIOS settings
  -set the BIOS to default settings and reboot the laptop
  -When the laptop reboots press F12 to get into the boot meny
  -When the boot menu appears on the screen put the original DVD of recovery in ODD
  -Choose the CD/DVD drive on the list and press ENTER
  This will force it's STRANGE to be the first boot device and you should see process on the loading screen. Click next or OK nothing change and wait for the recovery procedure starts.

  Please try it and let me know exactly what is happening.

• Cannot install recovery image on Satellite C650D

  Hello

  I have a C650D who fell just out of warranty and died on me. I did the recovery discs to purchase then thought that it would be a simple matter to use and I would be able to use the laptop again... seems I was mistaken :(

  I tried the F8 key at startup to option and all I get is the following message is displayed:
  No boot device - insert boot disk and press any key.

  I inserted the recovery disk and after an amount of noise from the hard drive and windows message takes over the files then I got a box asking me to choose the language I wanted, followed by an error message that there is something missing... I don't have the time to write down full seizure quit on me. After trying to load (incase there was something wrong with the first attempt) get the windows loading page then nothing...

  Can someone tell me what I need to do to fix this please?

  Thanks in advance

  > No boot device - insert boot disk and press any key.
  I fear this message has something to do with Mr. HARD disk HARD drive is recognized correctly in the BIOS settings?

  If so, the value please BIOS to the default settings and use recovery DVD again.

  By the way: you can see the language option, but you can not choose another language than the original language, you got with your laptop. In other words if you have BONES of the Spain, you can't choose another language. You have only BONE on the Spain.

• How to install the recovery on 5200 satellite image using the DVD USB drive

  Hello

  I have a problem with a 5200-902 Satellite that has the corrupted DVD - ROM, and I can't find the room to change. (model DVD: uj - 810 b)
  But I would like to reinstall the laptop with the recovery CD and I will not be able to enter the BIOS to change the boot order and start with a USB DVD - ROM.
  I removed the HARD drive and reinstall the WXp Prof by another machine, but when I restart the 5200 I read this message "error nel caricamento del operating system."

  When turning I press F2-F10-F12 but if I select another boot device starting the laptop by network.
  Can you help me get this book by an external USB DVD-ROM?

  Thank you

  Andrea

  There is no test in the past, but I guess you have to do on the track:

  Start your laptop by using the MS-DOS boot disk
  Load the MS-DOS driver for external DVD drive to access
  Boot the CD of facilities here in the hope that it will market

• Cannot run recovery on Satellite 1900 disk

  I tried to reinstall on my laptop Satellite1900 drive and the first disk ran fine, however the interrupted process to half-way through the second disc and wiped everything off the drive!

  He repeats to me there is no operating system and abandonment of my attempts to re-run the recovery disk, or start the recovery process and then stop.
  I need really help because this is my mom's computer, I said I would help him and have paralyzed instead of the laptop! DOH!

  If you cannot use the media use a recovery CD facilities Microsoft WXP. All the necessary drivers, tools and utilities that you can download at Toshiba page under http://eu.computers.toshiba-europe.com for assistance

• Cannot run recovery on Satellite P10 874 CD

  Hello
  Given that I had a lot of bugs and hang up, I gave my machine SATELLITE SP10-874 to a friend to load the recovery CD for me, he asked instead the NEW WINDOWS XP PRO, so that my machine with WINDOWS HOME EDITION venus. Now I am unable to run the recovery cd,
  Pls advice me how I bring it back to factory setting by loading Homexp.

  your response is much appreciated

  THX
  Bala

  What do you mean exactly?
  You are not able to boot from the recovery CD or what?

  To define the notebook back to factory setting you must simply boot from the recovery CD and follow the instructions on the screen.

  To boo from the CD, you must press the C key immediately after switching on the laptop. Alternatively, you can press the F12 key. Then a start menu should appear and then you may choose the CD/DVD drive as the boot source.

  Until you do this, the recovery CD must be inserted.

• Satellite P300-220 - cannot run Recovery Disc Creator

  Hello

  Yesterday I received my new laptop (Satellite P300-220). Today, I'm trying to make a record of recovery and launch "Toshiba Recovery Disc Creator", the hourglass appears for 3 or 4 seconds but nothing else, cannot access the application.
  Any idea?

  Thank you

  Hello

  Do you have something to change on the laptop before you start the Toshiba Recovery disk?

  It's not easy to say which is the reason, but in your case I would start the recovery of HARD drive option. Go to the advanced boot menu, select fix my computer.

• Cannot run game Bioshock on Satellite X 200 because of the graphics driver

  I just bought a 200 X and I can't update / install the drivers for the graphics card on the toshiba site! While installing it gives a message saying that a BONE bundles is installed.
  The computer is just out of the box and the only game I have installed is bioshock (which does not run in DX10 mode!

  any ideas?

  Hello

  JEPP, I have an idea. Check out these sites:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  and download the latest drivers for your machine from there. These drivers are native ATI/NVIDIA drivers, but the *.inf files have been modified to operate on mobile systems. Just give them a try and you will be able to play your games.

  PS: I really like bioshock and I understand you absolutely :)

  Welcome them

• Cannot find Recovery Disk 2 - Satellite A205-S6808

  Someone can help me. My Satellite (A205-S6808) died and I had to put a new hard drive. Now I can't find my second drive so I can't reinstall Vista. Can someone tell me where to get a disc or a picture of their make it for me. I want serial numbers or anything like that, I just need the second disc of recovery for Vista Home Premium.

  Call Toshiba and ask them to send you a replacement as defined recovery disk.

  You might be able to order online, visit the Web from Toshiba.

• Cannot create recovery on Toshiba Satellite C850 media

  Hi, tried twice now to create a 32GB flash Pen recovery media.

  First failed then to check the process saying there is a difference between files, second time failed during the process of recording, sorry, but have no error codes, y at - it a newspaper I can look it up in?

  See you soon,.

  Ray

  > is there a log I can find them in?
  To my knowledge, no.

  Try to format USB flash memory stick and try again. Also, you should try another USB key

• Cannot run recovery disk on Tecra A10

  I'm trying to do a system restore on my Tecra laptop a10 and follow the instruction to hold down the zero key and then pressing the start button.
  The hard drive recovery mode message appears at the bottom of the screen but then the laptop computer will continue to boot normally and won't give me any options to restore the laptop.

  In fact, he travels it's normal startup process.

  Can someone tell me what I am doing wrong?

  Thank you.

  Hello

  Are you able to retrieve the laptop using recovery disc?

  Did you create a recovery disk? Isn't it? Then I highly recommend this creation!

  By the way: this is a great description how to use HDD recovery:

  + How to recover a Toshiba notebook with the HDD recovery procedure.
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  Welcome them