Cannot run recovery on Satellite P10 874 CD

Hello
Given that I had a lot of bugs and hang up, I gave my machine SATELLITE SP10-874 to a friend to load the recovery CD for me, he asked instead the NEW WINDOWS XP PRO, so that my machine with WINDOWS HOME EDITION venus. Now I am unable to run the recovery cd,
Pls advice me how I bring it back to factory setting by loading Homexp.

your response is much appreciated

THX
Bala

What do you mean exactly?
You are not able to boot from the recovery CD or what?

To define the notebook back to factory setting you must simply boot from the recovery CD and follow the instructions on the screen.

To boo from the CD, you must press the C key immediately after switching on the laptop. Alternatively, you can press the F12 key. Then a start menu should appear and then you may choose the CD/DVD drive as the boot source.

Until you do this, the recovery CD must be inserted.

Tags: Toshiba

Similar Questions

  • Cannot run recovery on Satellite 1900 disk

    I tried to reinstall on my laptop Satellite1900 drive and the first disk ran fine, however the interrupted process to half-way through the second disc and wiped everything off the drive!

    He repeats to me there is no operating system and abandonment of my attempts to re-run the recovery disk, or start the recovery process and then stop.
    I need really help because this is my mom's computer, I said I would help him and have paralyzed instead of the laptop! DOH!

    If you cannot use the media use a recovery CD facilities Microsoft WXP. All the necessary drivers, tools and utilities that you can download at Toshiba page under http://eu.computers.toshiba-europe.com for assistance

  • Card wireless, not seen on Satellite P10 - 874

    Hello
    I have a Satellite SP10-874 (bought in Russia). I have problems with my wireless adapter windows just don't see it. No help, I found the drivers. I read similar messages on this forum, and in most cases, the problem was that the wireless card was just built into the laptop. But I'm 99% sure that mine has, as it seemed to work before. So if anyone can help, I would be very grateful. Thank you!!

    Hello

    I found information that the Satellite P10 874 has no wireless card. If the wireless card is onboard n this case, the card is listed and each unit with wireless card has a label of WLAN card in the lower corner.

    You can also check if you open the Wi - Fi coverage in the lower corner of the laptop. This cover is fixed with four screws.

    Good bye

  • Satellite P10 874: update BIOS wrong changes the serial number?

    Hello

    I have Satellite P10 874, my model number has erased the background after years of use.
    I recently did an update of the Bios of the Web from Toshiba site and realized more late it was for the SP10E models.

    Well my system did not fall down. (Part no) model number change if you update with a version of Bios, not intended to be your system?

    My system is still under warranty, but the new model series/number combo is shown as invalid global law database. My USB ports don't work anymore after that it showed a message of power surge.

    I need to go to the customer Service. Is there a way to retrieve my originial model no and not?

    Any help will be much appreciated.

    Concerning
    lejoe

    A 'bad' Biosupdate does or does not replace the modelnumber of your machine. So you don t have to worry when you give the machine to a service centre, they have the ability to retrieve your serial number with their system and understand the modelnumber of your machine.

    With regard to your USB ports: send the machine to your local concern for service-center and Don t on the modelnumber stuff. Your machine is still under warranty and since they will change about your pcb, your worries on the bad bios system is useless.

    Furthermore, I can't imagine that you seriously a bad bios Flash, since the machine during the biosupdate ususally scream if you try to Flash a bios wrong on it.

    Welcome them

  • Cannot install modem on Satellite P10

    I have an old Satellite P10

    (1) reinstalled Win XP sp3 (NOT of CD from Toshiba)
    2) obtained the most recent modem drivers from this Web site - can not install; It's Setup log

    2009-03-02 20:11:28 - Debug, Setup Version 1. 58A
    2009-03-02 20:11:28 - Debug, LogFlag = TRUE
    2009-03-02 20:11:29 - Debug, SourcePath is OldPath or not fixed drive
    2009-03-02 20:11:29 - Debug, installation MDC_TOS
    2009-03-02 20:11:29 - Debug, LogFlag = TRUE
    2009-03-02 20:11:30 - debug in InstallModemByRefresh()
    2009-03-02 20:11:30 - debug, CopyNT5Inf
    2009-03-02 20:13:32 - Debug, timer has expired!
    2009-03-02 20:13:32 - Debug, Setup failed

    (3) try Toshiba cd - same result modem drivers

    And Yes, I know - it's the same problem as described here several times: yellow question mark in device (PCI modem) Manager and the order of incorrect installation.
    But I installed much gentle and do not want to reinstall again

    How to install this driver AFTER other pilots?

    Hello!

    Driver Toshiba download page you will find an installation instructions document. Use this list as the software installation order and the recommended driver.
    That s important that you get all the functions work.

    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • Satellite Pro L550 - 13 M - cannot run recovery of HD products

    I have a new Toshiba Satellite Pro L550 - 13 M running Windows 7 and I shot this morning and he says Windows could not start and went into the Startup Repair.

    The last thing I did with it was last night, when I ran RegistryBooster2 and it cleaned up the registry. I have used this utility loads of time with this and previous books and it has been fine. I guess that it caused the problem though. It backs up the registry, but I can't restore because I can't start!

    Thus, after reboot a few times, he finally said "Windows cannot repair this computer automatically. If I look at Diagnostics and repair details, the journal lists all these tests, but says that they have completed successfully. I'm on the 38 repair attempt. During one of them, Startup Repair says it was a registry problem.

    If I try to view advanced options for system recovery and select a UK keyboard, I get this message:

    "You must login to access the System Recovery Options."

    and my only option is to click an OK button to restart.

    So, I'm stuck.

    I had a Windows 7 recovery CD and Startup Repair running on who arrives without error!

    However, because the phone is so new, I did not create restore points or recovery discs (don't have any blank DVDs at the time).

    The laptop has a HARD drive recovery partition, but I can't launch the recovery disc to access this option because of the thing "you must login" above.

    I'm stuck! Anyone out there with any ideas?

    Additional details:

    Cannot start in safe mode. Last known good configuration does not work. All roads lead to the Startup Repair.

    38 attempt has this in the Startup Repair log:

    Root cause found:
    ----------------------------------
    Startup Repair tried several times but still not determine the cause of the problem.
    ----------------------------------

    Can I use the Windows 7 recovery CD to get a command prompt and show C: and D: (where recovery of HD files are), but I don't know what to do from there.

    The CD is not for a Toshiba, so it does not list HD recovery option. I can only use it to run the Startup Repair (which reported no problem) or get a command prompt.

    Install new OS instructions on http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm and you will have new factory settings. with the settings everything will be OK again.

    To use the same account of the connection and the password as in Win7 (if you have one).

  • Satellite P300-220 - cannot run Recovery Disc Creator

    Hello

    Yesterday I received my new laptop (Satellite P300-220). Today, I'm trying to make a record of recovery and launch "Toshiba Recovery Disc Creator", the hourglass appears for 3 or 4 seconds but nothing else, cannot access the application.
    Any idea?

    Thank you

    Hello

    Do you have something to change on the laptop before you start the Toshiba Recovery disk?

    It's not easy to say which is the reason, but in your case I would start the recovery of HARD drive option. Go to the advanced boot menu, select fix my computer.

  • Satellite Pro U400 - WXP does not start & cannot run recovery is

    Help please!

    I tried running the recovery disc using the F12 key, I kept getting WARNING 'this HARD drive is not initialized' - initialize HARD drive & restart. are you sure you want to continue? I clicked on Yes-error F3e1000001 (HDD not not found) - I clicked on none he turned off the computer!

    I tried a different way by pressing the 0 im power on, because then I can no longer load window XP, it automatically runs 'Virtual disk Image', then by loading the tool recovery & followed the same HDD warning is not initialized & etc. and then eventually turn off the laptop itself!

    Please help if you can! Thank you!

    Hello

    I guess that your HARD drive is defective.
    The HARD drive is recognized in the BIOS?

    If this is not the case, replace the HARD drive and then try the recovery disk.

  • Cannot run recovery CD on satellite because of the hacker attack

    I would be grateful for any help on this.

    My equium has been hacked and the hacker has created an environment where:

    I can't uninstall norton
    I can't write to cd
    I can't change the registry

    and many other ailments that not allowing the recovery disc install clean
    OPERATING SYSTEM.

    How can I pull the plug on this threat please?

    Thank you
    Alan

    Hello, Alan

    Can you enter the BIOS settings, set the DVD drive as primary boot device and start the appliance with the recovery media in the DVD drive?

  • Cannot run the CHKDSK - Satellite L40-139 process

    When I start my laptop (Toshiba Satellite L40-139) always starts to run chkdsk
    He completed the phase 1 and then when it is at 30% through stage 2 it just goes directly to the login screen.

    I was wondering if someone can help me correct what I want to start the whole process.

    Thanks in advance.

    Hello

    You can run chkdsk after Windows has started.
    Type in the CMD COMMAND.
    The console should open and there you can use the command * chkdsk *.

    That's all.

  • Satellite P10 874, strange problem

    Ok
    Hi everyone I don't no how to start my problem is a problem and a story at the same time, I'll tell you one thing will help in the history that I live in Egypt, but I bought my laptop in Dubai
    I worked very p10 will during the first week but suddenly the usb ports stopped working all at once
    I went to Egypt to toshiba and I gave them the p10 but couldnot fix so they told me that I have to change the motherboard, I said okay, but they said that you are on the international interest of the motheboard is free but you must pay the tariffs on $300 to 500 and that's a lot of money
    so I sent the laptop with my brother to the Kuwait for toshiba it (he was there) they set the laptop and I have not paid anything
    but when I got the notebook back I found that missing something missing wireless 802nd motherboard they bring is not the same as the dose of a new not a WiFi connection
    I am really upset, I look on the net for toshiba service customer to tell them, but I have found no email or something which would do anything if he has Aproblem with one of the toshiba branches who must go and say
    I know wana
    and there is another thing that would be someone knows the detailed characteristics of his computer

    Hi, the Toshiba Page for the Middle East is->

    http://Gulf.computers.Toshiba-Europe.com/

    Then click on 'Information and ideas' look 'inside Toshiba. " You will find 'Contact Toshiba'.

    I think it is the best way to apply directly to them (or distributor).

  • Cannot run recovery disk on Tecra A10

    I'm trying to do a system restore on my Tecra laptop a10 and follow the instruction to hold down the zero key and then pressing the start button.
    The hard drive recovery mode message appears at the bottom of the screen but then the laptop computer will continue to boot normally and won't give me any options to restore the laptop.

    In fact, he travels it's normal startup process.

    Can someone tell me what I am doing wrong?

    Thank you.

    Hello

    Are you able to retrieve the laptop using recovery disc?

    Did you create a recovery disk? Isn't it? Then I highly recommend this creation!

    By the way: this is a great description how to use HDD recovery:

    + How to recover a Toshiba notebook with the HDD recovery procedure.
    http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

    Welcome them

  • How and where to order the recovery for Satellite P10-304 CD

    Have a Toshiba sp10-304.

    Hear it is strongly recommended!
    Unfortunetly system requires a complete reinstallation.

    Anyone know where I can acquire discs from factory settings or a phone number for Toshiba!

    Concerning

    All the mobile parts regardless if she s a CD or a HDD, RAM, etc. can be ordered from the local approved maintainer.

    You will need to contact the guy and the technician would be able to help you.

    I think that they can order parts directly from the Toshiba so make a call a request for more details.

    You can find the ASP database on the Europe of Toshiba page:

    http://EU.computers.Toshiba-Europe.com/-> support download &-> find an authorized service provider

    See you soon

  • Satellite P10 infrared device question

    I have the following question:
    I'm trying to connect a mobile phone via an infrared connection and use it as a modem GPRS under Windows XP Home SP2 on a Satellite P10 874. When the phone is in range, the laptop detects via the infrared port and I can upload files to the phone.

    In order to use it as a modem, I need to install a modem with the phone driver. But there is no infrared COM serial port in the list of ports (like the P10 has no serial port COM, there are not), so I can't create a new modem.

    Is it possible somehow to create a standart (for Windows) com port via the infrared port of the P10 (I think it's the way work the drivers of some infrared USB cards - create a virtual com port) so that I can create a modem for the mobile phone.

    Hi, Simeon,.

    I sometimes use my mobile phone as a modem, but I use it via Bluetooth. In my opinion, is that infrared is good for data transfer but is not fast enough for the Internet (speed limit of 4 Mbps) connection. Data transfer rate is too low and the connection can be interrupted. As far as I know that it is not possible to choose any COM port in your case.

    For small data transfer with the mobile phone's infrared adequate, but for the internet connection where you transfer speed to build a page it will be not enough quickly.

    My suggestion to you: pick up some information about Bluetooth technology and it will be ideal for you. I use my Bluetooth phone and it works perfectly. Setup was very easy.

    If you make a decision to make connection through Bluetooth and there may be a few problems I can help you.

    Good day.

  • Satellite P10 792 drivers OR recovery disk

    I bought a Toshiba laptop from the United Arab Emirates, model * Satellite P10 792 * in 2004 and had no problems with it until I decided to format in Turkey/Istanbul where I live now. I format and now the distributor of TOSHIBA in Turkey can not yet find the * drivers or the recovery disk * for me because they say it is a too old model! Why sell something if you run it in 5 years? I had no problem with the laptop my only mistake was to format thinking that it would make my computer!

    I desperately * need help from someone who can help me to find the GOLD recovery disc download drivers * for this model of laptop SATELLITE P10 792. Please help me. I don't want to throw my computer in the trash, it is with me since 2004, and I knew it would last me five years if I wanted to format :(

    Thanks in advance for any answers.

    Hello

    I don't understand why you're so angry. Visit the Toshiba download page and download all the drivers for Windows XP Home edition. If I remember well this laptop model is listed under the option ARCHIVE (type of product).

    Check it out.

Maybe you are looking for

  • Who to back up data from USB airport

    Hello everyone, I have an older version of Airport Extreme (7.6.4 firmware version) that has a USB drive connected as a fileshare storage device. Now, I'm looking for a good concept of backup files stored on the USB - stick. Are there suggestions, ho

  • Using NI 6211 to drive a relay

    Hi, I have a problem and I hope someone could help me. I am currently using an NI USB-6211 with Labview 8.6 box and want to order a relay. The relay (see attached PDF) will close the side secondary (30 V, 3 a) when the primary side is a current of 5

  • Loading games on vista

    I can't load my old games on vista - some will be most do not.  Suggestions - cannot afford to buy a few new games, and most is not available; for example, Robert E Lee, civil war general.  The games will load on xp not vista. Help

  • I wud like to use comic without 10 for the yahoo email but I can't "hold" when I choose it program fonts.

    When I go to 'fonts' in the control panel & select ' comic without "style it duznt want to 'hold' of the command.  I have to go into each email I send & select it repeatedly.  can u help me please?  THX jackie (^. ^)

  • Bluetooth Driver R285455 (WIDCOMM) installs on Win 7 x 64 E6410

    Try update Bluetooth driver Win 7 x 64, Dell Wireless 375 on an E6410. Driver package runs and almost at the end, before a "1935" error dialog box appears and restores the entire package. Something to do with MS VC 8 policy. Does anyone have a clue a