Cannot run recovery disk on Tecra A10

Similar Questions

• Cannot run recovery on Satellite 1900 disk

  I tried to reinstall on my laptop Satellite1900 drive and the first disk ran fine, however the interrupted process to half-way through the second disc and wiped everything off the drive!

  He repeats to me there is no operating system and abandonment of my attempts to re-run the recovery disk, or start the recovery process and then stop.
  I need really help because this is my mom's computer, I said I would help him and have paralyzed instead of the laptop! DOH!

  If you cannot use the media use a recovery CD facilities Microsoft WXP. All the necessary drivers, tools and utilities that you can download at Toshiba page under http://eu.computers.toshiba-europe.com for assistance

• Tecra A4 cannot read recovery disks

  I am trying to rebuild my Tecra A4 software.
  When I bought it in 2005, I did the recovery discs as recommended by using Sony CDR 700 MB disks.

  Now the CD-DVD do not read them.
  The discs are good, that I've explored them before (a while back), I can Explorer on another computer.

  The Tecra open commercial discs (e.g., printer put in place of the disks, etc.), but does not open the discs that were burned itself (for example, whether previously on the Tecra or another computer). I tired the Sony recovery discs, I tried CD - RW Fuji disks, I tired Memorex, MB 100 CD - R discs.

  None of them will work. Driver is up-to-date.
  I cleaned the lens. Still no luck.
  Any suggestions?

  Otherwise, how can I get a reconstruction of the initial state of the software as new on the system?
  I have an original XP disc that is generic to Microsoft.

  However, I don't want to go this route because I'm pretty sure that Toshiba uses all sorts of drivers that are not available from MS, nor readily available on the net without having to pay someone for them.

  > The Tecra open commercial discs (e.g., printer put in place of the disks, etc.), but does not open the discs that were burned self (for example, whether previously on the Tecra or another computer).

  In this case, to all CD/DVD players, that I had the same problem, because not all readers are compatible with all the disks that are on the market
  I think that is known to you

  However, this problem could be related to a hardware malfunction since the reader of the s laptop has been used 5 years long, it s the s drive laser lens can not calibrate correctly because of the stress of use

  It must be said that you can try to burn the recovery disk using another computer and then you could try to restore the operating system using the burned recovery disk.
  Try a few CD - R TDK or Verbatim
  I use TDK and I convinced m

  Maybe it will work, if not, will need you another CD/DVD drive

• Satellite Pro U400 - WXP does not start & cannot run recovery is

  Help please!

  I tried running the recovery disc using the F12 key, I kept getting WARNING 'this HARD drive is not initialized' - initialize HARD drive & restart. are you sure you want to continue? I clicked on Yes-error F3e1000001 (HDD not not found) - I clicked on none he turned off the computer!

  I tried a different way by pressing the 0 im power on, because then I can no longer load window XP, it automatically runs 'Virtual disk Image', then by loading the tool recovery & followed the same HDD warning is not initialized & etc. and then eventually turn off the laptop itself!

  Please help if you can! Thank you!

  Hello

  I guess that your HARD drive is defective.
  The HARD drive is recognized in the BIOS?

  If this is not the case, replace the HARD drive and then try the recovery disk.

• Cannot create recovery disk

  I just bought this laptop Friday CQ50-142.  Today I wated to create the recovery disc for it.  I will, however, the steps mentioned in the leaflet supplied with my computer laptop paperwork.  When I try to create the recovery disk, I get this error. "A set of recovery discs was created for this PC. That one game is allowed per PC. "I have never setup one set of recovery disc for the laptop.  I don't know that I get this error message.

  How can I create my recovery disks?

  Thanks for your help

  Do you have someone set up your laptop for you?  Was it new or mixed open-box?
  
  You might try to run this fixand try again... or call HP Technical Support to the 18004746836

• Satellite P300-220 - cannot run Recovery Disc Creator

  Hello

  Yesterday I received my new laptop (Satellite P300-220). Today, I'm trying to make a record of recovery and launch "Toshiba Recovery Disc Creator", the hourglass appears for 3 or 4 seconds but nothing else, cannot access the application.
  Any idea?

  Thank you

  Hello

  Do you have something to change on the laptop before you start the Toshiba Recovery disk?

  It's not easy to say which is the reason, but in your case I would start the recovery of HARD drive option. Go to the advanced boot menu, select fix my computer.

• Satellite L305-S5917 cannot create recovery disk

  I have a Satellite L305-S5917.

  Yesterday I tried to create the recovery disk with the recovery disc creator, and then when I put a DVD + R, it says 'another application is using that drive or no recordable discs are recognized on your PC. Please check the status of the drive. (Error code: 0D00E4-F0-00000000). »
  I also try with DVD - R, but I wasn't too. Someone tell me what is the problem with my laptop and how do I create a recovery disc.

  Thank you

  Hello

  This error message does not for me.
  You have installed an application like Nero CD/DVD burning?

  Maybe an enforcement agent runs in the background and optical disc drive is permanent in the surveillance state. Restart your laptop, check the substantive activities and make sure that nothing can be responsible for this drive blocking.
  The STRANGE is properly recognized in Device Manager?

  One last thing: for creation of recovery media I would recommend to use high quality DVD-R virgins.
  I had the best experience with TDK and Verbatim.

• What happens when I run recovery disks in the computer?

  Original title: .vista

  I want to run my vista recovery disk, what actually happens when I do this.

  Hello

  When you run the manufacturer's recovery disk, it puts your computer / computer laptop back to factory settings. the new condition that you bought it in.

  All your data: pictures, music files, etc. must be backed up on an external hard drive before making a recovery, because they will be normally lost.

  All data updates to Windows, 3rd party programs, and that you have installed since your purchase of computer no longer the disk hard as the hard disk is normally wiped clean of everything during the recovery process.

  The above is called a destructive recovery.

  Some computer manufacturers also have the possibility of a non-destructive recovery, which stores programs and data in place.

  But, the data must be saved IN the MATTER.

  If your problem is so bad that you need to reinstall, a non-destructive recovery does not solve the problem of normally and most destructive recovery needs to be done

  See you soon.

• Cannot find Recovery Disk 2 - Satellite A205-S6808

  Someone can help me. My Satellite (A205-S6808) died and I had to put a new hard drive. Now I can't find my second drive so I can't reinstall Vista. Can someone tell me where to get a disc or a picture of their make it for me. I want serial numbers or anything like that, I just need the second disc of recovery for Vista Home Premium.

  Call Toshiba and ask them to send you a replacement as defined recovery disk.

  You might be able to order online, visit the Web from Toshiba.

• Cannot run scan disk error: scan annex next time you start the computer

  Original title: scan disk

  disc scanning does not (the schedule disk check)

  When I try to run the disc scan, it is said to plan the next time that you start the computer, when I restart the computer analysis, it begins just same Windows as usual

  Windows 7 Home Premium 32 bit as the same thing happens with my other computer his Windows 7 Home Premium 64-bit

  Penny Pombert

  E-mail address is removed from the privacy *.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  You are able to run the disk check to the prompt with success?  Reference the link below and follow the steps in FireDocUSMC.  Please let us know status.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/using-Windows-7-How-do-i-run-Chkdsk/a68b3e4d-1a42-E011-9767-d8d385dcbb12?page=3

  Hope this information is useful.

• Satellite Pro L550 - 13 M - cannot run recovery of HD products

  I have a new Toshiba Satellite Pro L550 - 13 M running Windows 7 and I shot this morning and he says Windows could not start and went into the Startup Repair.

  The last thing I did with it was last night, when I ran RegistryBooster2 and it cleaned up the registry. I have used this utility loads of time with this and previous books and it has been fine. I guess that it caused the problem though. It backs up the registry, but I can't restore because I can't start!

  Thus, after reboot a few times, he finally said "Windows cannot repair this computer automatically. If I look at Diagnostics and repair details, the journal lists all these tests, but says that they have completed successfully. I'm on the 38 repair attempt. During one of them, Startup Repair says it was a registry problem.

  If I try to view advanced options for system recovery and select a UK keyboard, I get this message:

  "You must login to access the System Recovery Options."

  and my only option is to click an OK button to restart.

  So, I'm stuck.

  I had a Windows 7 recovery CD and Startup Repair running on who arrives without error!

  However, because the phone is so new, I did not create restore points or recovery discs (don't have any blank DVDs at the time).

  The laptop has a HARD drive recovery partition, but I can't launch the recovery disc to access this option because of the thing "you must login" above.

  I'm stuck! Anyone out there with any ideas?

  Additional details:

  Cannot start in safe mode. Last known good configuration does not work. All roads lead to the Startup Repair.

  38 attempt has this in the Startup Repair log:

  Root cause found:
  ----------------------------------
  Startup Repair tried several times but still not determine the cause of the problem.
  ----------------------------------

  Can I use the Windows 7 recovery CD to get a command prompt and show C: and D: (where recovery of HD files are), but I don't know what to do from there.

  The CD is not for a Toshiba, so it does not list HD recovery option. I can only use it to run the Startup Repair (which reported no problem) or get a command prompt.

  Install new OS instructions on http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm and you will have new factory settings. with the settings everything will be OK again.

  To use the same account of the connection and the password as in Win7 (if you have one).

• Re-apply Anytime Upgrade license after running recovery disk

  4 years ago, I bought a Toshiba laptop with Windows Home Premium pre-installed, and provided with a Toshiba recovery media. As I need to join a domain but wanted to keep the media center software that I used also provided Express Upgrade disk to upgrade to ultimate. This has been paid at the time and was completely automatic with a "paid" invoice from Toshiba, which is the only element received.

  Due to lack of space etc. I replaced the HARD drive, before doing so in order to become a record of the license key encrypted so I could reinstall. However, the recovery disc will reinstall only Home Premium with the embedded OEM key and does not offer the possibility to enter the spare key. Other forums have indicated that all I have to do is to run the utility to upgrade Express again where I would get the opportunity to get the software, I paid for. All that is to offer a screen to compare the different versions of Vista that connects me in turn to a web page of MS indicating that the Service at any time update for Vista has been suspended, the upgrade to Windows 7 instead.

  I can't use the upgrade Express disk I received with the laptop to find out if that would work, as the drive had a crack in it and no longer charges originally.

  My questions are, how to reapply the key to get my system up to the ultimate and that should I have received from Toshiba when I bought the upgrade?

  Please see: How to replace Microsoft software

  Carey Frisch

• Cannot run recovery on Satellite P10 874 CD

  Hello
  Given that I had a lot of bugs and hang up, I gave my machine SATELLITE SP10-874 to a friend to load the recovery CD for me, he asked instead the NEW WINDOWS XP PRO, so that my machine with WINDOWS HOME EDITION venus. Now I am unable to run the recovery cd,
  Pls advice me how I bring it back to factory setting by loading Homexp.

  your response is much appreciated

  THX
  Bala

  What do you mean exactly?
  You are not able to boot from the recovery CD or what?

  To define the notebook back to factory setting you must simply boot from the recovery CD and follow the instructions on the screen.

  To boo from the CD, you must press the C key immediately after switching on the laptop. Alternatively, you can press the F12 key. Then a start menu should appear and then you may choose the CD/DVD drive as the boot source.

  Until you do this, the recovery CD must be inserted.

• Cannot run the disk error check: check the disk has been disabled by a program use system restore.

  Title: How re - enable disk check after it has been disabled?

  I used a registry repair whichremoved all system restore and disabled of the disk check points. How do I re active chkdsk as he wants me to restore which I can't?

  I used the free registry repair recommended by c-net

  original title: re enable check disk

  Hello

  Follow the steps mentioned below and check if the problem persists.
  File system (CFS) Checker
  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
  To run the System File Checker tool, follow these steps:
  (a) click Startand type cmd in the box start the search.
  (b) click on cmd in the list programs, and then click run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  (c) at the command prompt, the following line and then press ENTER:
  sfc/scannow
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?
  http://support.Microsoft.com/kb/929833
   
  Hope this information helps.

• Cannot run recovery CD on satellite because of the hacker attack

  I would be grateful for any help on this.

  My equium has been hacked and the hacker has created an environment where:

  I can't uninstall norton
  I can't write to cd
  I can't change the registry

  and many other ailments that not allowing the recovery disc install clean
  OPERATING SYSTEM.

  How can I pull the plug on this threat please?

  Thank you
  Alan

  Hello, Alan

  Can you enter the BIOS settings, set the DVD drive as primary boot device and start the appliance with the recovery media in the DVD drive?