Cannot scan Control Panel - printer HP Deskjet F4580 wireless

Similar Questions

• new OfficeJet 6600 - cannot scan or fax, print OK. Use wireless.

  Hi I have read and tried all the threads on this topic. It is now 6 hours later and about 30 restarts, installs, re - install and re - re installs, oh and uninstall complete, each time turing disable firewall and anti-virus. Microsoft Paint does not either, but the printer appears in the windows fax and scan, but just crashes when you try to connect. I tried the HP printer and troubleshooting scanner recognizes the printer but when you select scan murky flat also on drivers. What else... UH I tried most of help here... so, who is up to it. Machine of Windows 7. I got a connected 6700 office jet last week worked very well at work, then bought this 6600. I thought of conflict but uninstalled all hp files and reinstalled using the hp installation package. Follow-up thread on updating and services.msc regestry. I've read about reg edit or mechanic, have used AVG reg cleaner, but disabled for installation.

  This has been posted on the forum really works and now I can scan!

  http://www.YouTube.com/watch?v=HbWpgww5I-M

• Does anyone know how to use the HP Deskjet F4580 wireless printer

  Does anyone know how to use the HP Deskjet F4580 wireless printer

  Do you have a specific question or just general knowledge?

  The manual is available online here.

• Where to find the MAC address on a HP Deskjet F4580 wireless

  I inherited a HP Deskjet F4580 wireless capable. I tried installet to my wireless network; but my network in addition to WEP security also uses MAC address filtering. Where and how can I determine any address of the printer? There is no label or similar bodies with the number in this printer.

  Using Win XP Pro SP3. Any help will be much appreciated

  Hello

  Print a Network Setup page by following the steps below:

  1. Make sure that plain white paper is loaded in the product.

  2. On the control panel of the HP product, press and hold the Scan button ( ) for two seconds.

     The product prints the configuration page.

• HP Pro Plus 6800: error 0 x, 00000057 wireless and wireless Direct properties of the Windows Control Panel printer - print a Test Page

  I have a laptop Toshiba Satellite of Win7 64 bit and a HP 8600 Pro Plus,
  update firmware and drivers about 2 weeks for the 8600 was a
  a long time I have been updated, which is connected wireless has decided to
  Direct to print Wireless Setup once the program installation, I tried to do a windows
  Print the Test Page in the printer property Panel, somewhat normal for
  set up a printer

  Under the connection of the conciergerie, I got the error message 0 x 00000057
  Under wireless direct printing, I got the same error 0 x 00000057

  After spending the time to check the settings, connections and asking
  Why? I decided to see that if I could print the docs, I print a PDF file,
  Notepad and Word documents in each application under the two
  configurations without problem.

  Under the wireless connection, I started the Web Services module
  and was able to make the impression within the Web Services Test page
  module without problem could not yet do the printing Test Page
  in the printer properties panel.

  I ran Print and Scan doctor who, to my surprise mentioned
  a conflict of Driver, I welcomed this program to uninstall the driver,
  went looking upward for the driver and the same driver was so done
  No download but to remove the driver and reinstalled the driver.
  Always error message here.

  I'm now tempted to delete a direct print wireless and see
  What happens if the error disappears, if she does not unstall all
  associated with the printer and do a clean reinstall. In case of emergency
  is there an alternative to the use of the Web Service module to the setting
  When not connected to the wireless network?

  I think that the Panel of the printer would do this (I'll watch this later

  spend enough time on it), or do I need to run Web Services to

  direct wireless installation, just think about this, otherwise I'll shoot

  a usb cable.  Maybe if I install Direct wireless on the printer control panel

  the message will disappear as the installation of the printer program, not software

  on the laptop?

  It is a minor problem since I can still print but question why!

  See other issues about this error message I thought

  spend my experience with this error.

  Always had a number of things to think and try, once again.

  If your getting this error message I would suggest trying a test page printed

  within the module of Web Service to see if the message developed.

  Could not back the driver so I removed the printer driver

  by deleting.

  19/07/2011 Date print driver
  Print driver version 26.0.0.0

  and removed software in Add and Remove software Hp also had to turn

  disable the wireless module directly on the printer to reinstall from the CD.

  Reinstalled printer/software form the CD supplied with the printer, the

  Driver date is 08/12/2009 Ver.9.0.0

  No more error in configuration.

  is the answer to the error message 0 x 00000057 or 0x00000xx

  associated with the driver? Or just the 0 x 00000057?

  Could not find a list of drivers between the driver and

  the driver on the CD.

  Will not update the driver for a good while or until I have too.

  The dates on the drivers are only about two years apart, the

  The version numbers are an issue questable.

• HP 6700 Premium Wi - Fi. The scan control panel no longer appears on my desktop.

  I have a HP 6700 Premium.  Wireless connection is ok.  I can scan a device memory to the printer/scanner control panel.  I have a 6700.exe hp shortcut on my desktop, but when I click on it, there are no options for the scan to my computer.   Until a few days ago, when I clicked on this shortcut, I had options for scanning as well as printing.  Thank you.

  I uninstall the current software and reinstall the software from the site Web of Hp. I included a link to the software select the feature complete drivers. Once the software download and is ready to install, make sure that you do not allow updates from Hp.

  Click here for the drivers.

• Error message cannot open Control Panel after installing the bsaving, missing rundll32.exe application.

  Original title: If I reinstall Windows XP is that what he's going to recover my rundll32.exe file?  It cannot be found anywhere. Thank you.

  This has happened after I acquired a discount to purchasing application called «bsaving» Now I can't access control panel to uninstall the software.

  Hello

  (1) what exactly happens when you try to open Control Panel?
  (2) what is the accurate and complete error message?
  (3) don't you make changes on the computer before the show?

  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Cannot find the Rundll32.exe file when you open Control Panel
  http://support.Microsoft.com/kb/812340

  Method 2:
  If the problem persists you can scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  For more information, please see the link.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  I hope this information helps!

• print from macbook on deskjet F4580 wireless printer?

  What should I do to get my Book Mac OS X 10.6.8 to print from macbook on printer deskjet F4580, use wifi?

  Hello

  The printer is currently connected to your wireless network?

  In order to connect the printer to your network wireless, temporary, connect the USB cable.

  Enter the Applications > Hewlett-Packard > peripheral utilities and follow the HP Setup Assistsnt. you will see an option to configure the wireless connection.

  If you can't find the Hewlett-Packard folder, you can download the full feature software below:

  http://FTP.HP.com/pub/softlib/software11/COL29757/Al-73899-2/DJ_AIO_06_F4500_USW_Full_Mac_WW_105.dmg

  Kind regards

  Shlomi

• Cannot open Control Panel

  Original title: Control Panel

  Windows XP; I think there a newer version through updates with service pack 3 installed.

  I can't add or remove programs; access to cheque accounts or user control panel system, whenever I try, I get the following error.

  I don't know how to rename. When I try to search for it, it comes up with nothing. It is as if it is lost or dumped and I don't know how to get it back. Do I have to have this file in particular?

  I can't even format my hard drive and reinstall Windows XP

  (Windows cannot find 'C:\WINDOWS\system32\rundll32.exe'.  Make sure you typed the name correctly and then try again. To search for a file, click the Start button and then click Search).

  When you try to open a control panel applet, you see a message like this:

  Control Panel
  Windows cannot find 'C:\WINDOWS\system32\rundll32.exe '.  Make sure you typed the name correctly and then try again.  To search for a file, click the Start button, and then click search.

  As the rundll32.exe file is one of 3498 Windows File Protection files handles, should never be missing.

  If the file is actually missing, it was probably quarantined (actually deleted) programmatically your antivirus or anti-malware not specified that you use.

  You can look in the c:\windows\system32 folder and see if the file is actually missing or not, and if you find that it is missing, you must replace it somehow.

  Despite the repeated Microsoft committed advice of 'experts' Support Engineer to run the System File Checker, run sfc/scannow won't help you and it does not replace the missing file.  That's not what sfc/scannow does it's not how it works and it's not what it is for.

  Here's what works :

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called rundll32 when the name of the file should really be called rundll32.exe (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• Cannot access control panel Add/Remove programs and Windows xp system files

  I get the error message: Windows cannot find 'C:\windows\system32\rundll32.exe' when I try to open add/remove folder in Control Panel

  Hello rocksnag, welcome.

  If you click START then type C:\Windows\System32\rundll32.exe' (without the quotes) and press on enter, what happens?
  If it says its lack, try this:

  1. download a copy of rundll32.exe from this location: http://sites.google.com/site/pwdionline/Home/rundll32.zip
  * This version works with Vista 32 bit to get references
  2 extract the file to your desktop, right click and select 'copy '.
  3. click on START
  4. click on 'computer '.
  5. double-click on "disk Local (c)"
  6 double-click on "Windows".
  7 double-click on "System32".
  8 right click in all white space, and then select "Paste".
  9. restart your computer
  
  Let us know if this helps,

  Thank you!

• Printer HP Deskjet F4580 ink failed to register, impossible to find the solution in troubleshooting

  1 hp Deskjet F4580

  2. Windows 7 64 bit

  3 ' e' on the screen, (new) black ink won't register and service orange flashes

  4. no change known

  You can try the following steps:

  Click the Windows icon.
  Click on all programs.
  Click HP.
  Click on HP Solution Center.

  HP Solution Center will open in a new window.
  Click on settings ().
  In the print settings box, click Printer Toolbox. The printer Toolbox opens.
  On the device Services tab, click on clean up the (from print cartridges).
  Click on clean up to start the process.

• HP ENVY 7640: Control Panel printer is not responding.

  control panel touch printer does not respond. The power button is sensitive and the button of the nfc. Need help please

  

  Hey @mrjunior,

  Welcome to the Forum from HP Support.

  I see that the front panel of your printer does not work e-all-in-one HP ENVY 7640.  I want to help you with this.

  Have you tried a hard reset?

  1 make sure that your printer is on.
  2. unplug the power cord at the back of the printer.
  3. wait 60 seconds.
  4 reconnect the power cord to the back of the printer.
  5. press the power button to turn on the printer (if it does not start automatically).

  It has more advanced reset steps available, but they are not good for you if the printer will not allow for you to navigate the touchscreen menus.  If this basic trick restores façade features let me know and I will private message you the semi full reset steps.  Otherwise, I recommend that join you our technical support team. You can click on the following link to start a business: www.hp.com/contacthp/

  Once you complete the form online to build your business, you can choose among different ways to contact direct.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• Group administrator cannot open Control Panel, Manager of tasks or access networked readers

  Hello

  I have a little trouble getting one of our computers in the domain to cooperate.  We've added a bunch of user profiles of domain on this computer, all under the administrator group, but nobody except the local administrator can access network drives, open Control Panel and open the Task Manager.  Even our domain administrator cannot do the previously listed.  We have 3 other computers that use all the same members, and they are all very well, so I don't think that the question lies in group policy.  It's almost as if the local administrator group settings have been changed somehow?  I went into the local group policy and all settings seem correct.  I'm puzzled little at this stage.  This could be the cause of this problem?  What is a corrupt local administrator account?  For any help or suggestion would be greatly appreciated!
  Thank you!

  Hi Jay,.

  Thanks for posting your query in Microsoft Community.

  The question you have posted is linked to the domain. It's going to be better suited than it pro. I suggest you post in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  I hope this helps!

• KB3035583 failed - cannot access control panel or turn off PC

  Because today, I'm not able to access control panel or turn off my PC Windows8.

  I checked the software updates, and I see that the KB3035583 update failed last night. If windows 10 update I don't want installed nor am I eligible for it. However, this update failed meant now I can not access PC settings, control panel or turn off my PC. Also I am not able to run any command as an administrator because it tells me that I don't have that even if I am sure that this feature is enabled, and it's my PC denied access. I also tried restore but even that does not work.

  Advice please?

  Hello

  See if this helps you:

  "How Fix and PC Restore settings and"PC settings"in Windows 8.1"

  http://www.eightforums.com/tutorials/42001-PC-settings-fix-restore-Windows-8-1-a.html

  Information

  This tutorial will show you how to restore the PC settings on applications screen and set the 'Change PC settings' link in the charm of settings (+ I) in Windows 8.1 and Windows RT 8.1.

  You must be logged in as an administrator to be able to do the steps in this tutorial.

  _____________________________________________

  If this isn't the case, follow these steps.

  «Use the System File Checker tool to repair missing or corrupted system files»

  http://Support2.Microsoft.com/kb/929833?WA=wsignin1.0#manually repair

  _________________________________________________

  And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

  "How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Read it in conjunction with the rest of the information they give link above.

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If not, then run the Dism/online/Cleanup-Image /RestoreHealth command to repair damage to the component store,

  Repair-WindowsImage-online - CheckHealth

  Repair-WindowsImage-online - ScanHealth

  Repair-WindowsImage-online - RestoreHealth

  Restart the PC afterwards, and then retry the command sfc/scannow .

  If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.

  __________________________________________________

  "How to update windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  Refresh your PC goes like this:

  • The PC starts in Windows RE (Recovery Eenvironment).
  • Windows RE scans the hard drive for your data, settings, and applications and puts them aside (on the same drive).
  • Windows RE installs a new copy of Windows.
  • Windows RE restores the data, settings, and applications, which it set aside in the newly installed copy of Windows.
  • The PC reboots into the newly installed copy of Windows.

  _________________________________________________

  "How to reset Windows 8 and Windows 8.1" . "

  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  "When you reboot your PC, the drive will be completely reset and all your applications and your files will be removed it." Windows 8 will be reinstalled, and you need to change any settings, and then reinstall all the apps you want to come back after the reset. If you know if all the files you don't want to lose, then you must back up these files before you start resetting.

  See you soon.

• Cannot access control panel or Windows updates and not more sound

  Yesterday, I restarted my computer and a message keeps popping up that I am victim of software counterfeiting (in reference to Microsoft Windows) when I bought the computer at Future Shop just a year ago. Also, now there is a red X on the speaker icon in the corner and said "no audio output device is installed". I followed the instructions mentioned in another post, as well as other Web sites, and nothing seems them works. Above everything else, I can not access the control panel. It appears and disappears immediately. If this were not already enough, Windows Update does not work or the other. The icon is there, but whenever I click on it, nothing happens.
  I only bought the computer a year ago, and there is already a long list of problems with it. I'm at the end of my rope! If someone is brave enough to tackle these problems, I would really appreciate it. Thank you!

  So.Lai,

  Thank you for visiting the forums of Windows Update. Please post your Windows Genuine Advantage (WGA) related posts in one of the following links:

  For Windows XP:

  http://social.Microsoft.com/forums/en-us/genuinewindowsxp/threads/

  For Windows Vista:

  http://social.Microsoft.com/forums/en-us/genuinevista/threads/

  You will find the MVPS and forum MS Moderators who will be able to help you further. Do to the nature of your problem, you must do the following:

  Run the diagnostic tool - http://www.microsoft.com/genuine/diag/

  Then copy and paste the results in your post in the other forum.  No personal information is collected in the diagnostic tests.

  Thank you for visiting Windows Update forum.

  Rick