Cannot search users

Similar Questions

• Cannot search for windows update, error800700B7

  Original title: Vista 2. Windows Update says first major update but cannot search updates. I get error code 800700B 7.

  I fight with my laptop Acer Aspire 5313 since before the new year, trying to get my Media Player to work... trying to get my updates to load and I finally did a restore disk in desperation. I noticed when I did restore the Version of Windows Vista Home Premium it restored to was that for Service Pack 1, it should have been 2 Pack and registration of license # is different from that on the Windows label on the bottom. I downloaded the Service Pack 2 of MicroSoft.com as my laptop came with ANY disks and I thought I'd finally be able to perform the necessary updates and get at least my laptop up and running again as it was before the problems started. When I try to get the updates, it says I must first update Windows Update. I try to update, update and get tells me it can not search for updates. error code 800700B 7. Help! Please...

  Hello
  You can follow the steps and then check.

  Step 1:
  You can try to disable the antivirus installed on your computer software.
  You can see the following link.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
  You can try to reset the Windows Update components. Read the following article.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
   
  It will be useful.

• Cannot search updates. error C8000210.

  Windows cannot search for updates. I get the C8000210 error code. He says its an unknown error.

  Try the fix on this page: http://support.microsoft.com/kb/971058

  I hope this helps!

• I have search on, but cannot search.

  I have search on, but cannot search.  If I click on start, then try searching, I tap and nothing happens.  Search for libraries, I type in the search box, and nothing happens.

  I have search on, but cannot search.  If I click on start, then try searching, I tap and nothing happens.  Search for libraries, I type in the search box, and nothing happens.

  ================================================

  The following links may be worth a visit:

  (ignore the downloads and simply read the tutorials)

  Windows 7: Windows 7 search is not working properly.

  Windows 7: Windows Search - configure and use

• vMA 5.5 error: cannot add users.

  Hello.

  I need to add 3 guests to vMA.I is not domain controller.

  1 deploy charges vMA of the FVO and configure the IP and password for admin-vi.

  2. Add the first host from ESX01 successfully. ( vifp addserver esx02 - fpauth authpolicy)

  3. added ESXi of second and third finishing with failure. (commands below)

  VI-admin@vma02:~ > vifp addserver esx02 authpolicy - fpauth

  root@esx02's password:

  VI-admin@vma02:~ > vifp mailing lists

  esx02.localdomain ESXi

  VI-admin@vma02:~ > vifp addserver esx03 authpolicy - fpauth

  root@esx03's password:

  Error: Cannot add users

  in vSphere client, you can see something that:

  

  For above tasks creates user-vi and vi-admin next. After that many seconds, vi-admin is removed (I dunno why...)

  /var/log/VMware/VMA/vifpd.log on vMA

  [2016 04-07 19:51:07.186 7F220CD47700 info "App"] command-> 1

  [2016 04-07 19:51:07.187 7F220AEC7700 info "App"] ADDSERVER

  [2016 04-07 19:51:07.197 7F220CD47700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016 04-07 19:51:07.595 7F220AEC7700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  [2016 04-07 19:51:12.144 7F220CD47700 info "App"] command-> 1

  [2016 04-07 19:51:12.145 7F220CD47700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016 04-07 19:51:12.145 7F220AE45700 info "App"] ADDSERVER

  [2016 04-07 19:51:12.504 7F220AE45700 info "App"] Already connected.

  [2016 04-07 19:51:12.509 7F220AE45700 info "App"] Already connected.

  [2016 04-07 19:51:30.308 7F220AE45700 info "App"] permissions set for [email protected]

  Credstore [2016-04-07 19:51:30.345 7F220AE45700 info "App"]: Add [email protected] credstore vi-admin user

  [2016 04-07 19:51:30.361 7F220AE45700 info "App"] can take possession of the user [email protected].

  [2016 04-07 19:51:30.361 7F220AE45700 WARNING "App"] ownership of [email protected] because it seems to be created by us.

  [2016 04-07 19:51:52.534 7F220AE45700 error 'App'] addserver: error occurred when adding users to esx03.localdomain... roll back. Error in Vma

  kernel.

  [2016 04-07 19:51:52.582 7F220AE45700 info "App"] User [email protected] is created by vifp. Detached...

  [2016 04-07 19:51:52.703 7F220AE45700 info "App"] could not remove permissions for [email protected].

  [2016 04-07 19:51:52.704 7F220AE45700 info "App"] deleted user [email protected].

  [2016 04-07 19:51:52.733 7F220AE45700 info "App"] [email protected] the user is removed from vi-admin credstore.

  [2016 04-07 19:51:52.768 7F220AE45700 error 'App'] Cannot add users

  [2016 04-07 19:51:52.768 7F220AE45700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  [2016 04-07 19:51:52.772 7F220AE45700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  In what newspapers can I find something more?

  var/log/VMkernel.log on the host is not clear to me... but if someone asks I'll stick.

  What should I do more? I want only add 3 esxi servers at VMAs and the next time you connect to these esxi without putting password.

  Interesting, that's when I deployed the next vMA02 and VM03, I can only add an esxi to vMA. During the second and third esxi adding that generate the same mistakes... Now I have 1 vMA for each host ...

  Please on the suggestion and help... because my adventure with vMA is not good... the last time I was the problem with this vMA 5.5 the session is not authenticated after connect you to the target ESXi and not solved this in my second lab...

  Sebastian

  Update:

  I use this command to only simple time without authpolicy:

  

  Newspapers:

  Command [2016-05-11 04:15:20.216 7F7A93D87700 info "App"]-> 1

  [2016-05-11 04:15:20.219 7F7A91E85700 info "App"] ADDSERVER

  [2016-05-11 04:15:20.223 7F7A93D87700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016-05-11 04:15:20.362 7F7A91E85700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  Command [2016-05-11 04:15:24.144 7F7A93D87700 info "App"]-> 1

  [2016-05-11 04:15:24.144 7F7A93D87700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016-05-11 04:15:24.144 7F7A91EC6700 info "App"] ADDSERVER

  [2016-05-11 04:15:24.196 7F7A91EC6700 info "App"] Already connected.

  [2016-05-11 04:15:24.198 7F7A91EC6700 info "App"] Already connected.

  [2016-05-11 04:15:24.732 7F7A91EC6700 info "App"] permissions set for [email protected]

  Credstore [2016-05-11 04:15:24.777 7F7A91EC6700 info "App"]: Add [email protected] credstore vi-admin user

  [2016-05-11 04:15:24.791 7F7A91EC6700 info "App"] can take possession of the user [email protected].

  [2016 05-11 04:15:24.793 7F7A91EC6700 WARNING "App"] ownership of [email protected] because it seems to be created by us.

  [2016-05-11 04:15:26.943 7F7A91EC6700 info "App"] permissions set for [email protected]

  Credstore [2016-05-11 04:15:26.980 7F7A91EC6700 info "App"]: adds the [email protected] vi-user credstore user

  [2016-05-11 04:15:27.052 7F7A91EC6700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  

  

  Test:

  VI-admin@localhost:/var/log/VMware/VMA > vifp mailing lists

  ESX01.localdomain ESXi

  esx02.localdomain ESXi

  esx03.localdomain ESXi

  VI-admin@localhost:/var/log/VMware/VMA > vifptarget s esx03.localdomain

  VI-admin@localhost:/var/log/VMware/VMA[esx03.localdomain] > esxcli vm process list

  vMA02

  World ID: 35859

  Process ID: 0

  VMX Cartel ID: 35856

  UUID: 42 37 c3 b6 11 61 29 95 - 30 98 9f c1 b3 44 95 ba

  Full name: vMA02

  The configuration file: / vmfs/volumes/56edd79c-9225dbd5-c1a2-2cc260319711/vSphere Management Assistant (vMA) / vSphere Management Assistant (vMA) .vmx

  vMA03

  World ID: 39084

  Process ID: 0

  VMX Cartel ID: 39081

  UUID: 42 37 be 3rd 4 b 98 8 b - f0 to f9 cf 0c ec e6 f2 f9 0c

  Full name: vMA03

  The configuration file: /vmfs/volumes/56edd87a-e0640a1a-0842-2cc260319711/vMA03/vMA03.vmx

  Correct on esx03 I have vMA03 and vMA02.

  

  Then seems OK.

  Case closed.

• vCAC 6.1 Catalogue right - cannot search for or select users or group?

  I want to install vCAC 6.1 from scratch and try to entitle a group of users for my first article in catalog.  When I'm on the Administration > catalog management > rights tab and type "domain admins" ordomain\domain admins"to search for a user I just get"no data to display.

  

  I thought that my source of identity was the issue then I double checked that...

  

  And the strange thing is that I can seek this identity store when I'm under Administration > groups

  

  I don't know why I can't find users and groups above, but I can look for them in the admin > groups option.  I have been stuck on this for about a day and can't get anywhere.  I restarted the identity goes, the vcac goes and the iaas server.  The logs will show that nothing is wrong either.

  I was walking around videos from youtube by Yves Sandfort.  I watched all the videos of the series and followed, but at 10:08 in the video, I get to a stopping point.

  VCAC VMware 6.0 - based hypervisor Blueprint by Yves Sandfort - YouTube

  I am new to vCAC so I could have done something wrong.  I hope that its simple.  Let me know.  Thank you!

  
  Joe

  Just make sure, but domain administrators have user rights in the Group of companies to ensure that this right is?  If they have not so you will not be able to grant them rights to this right.

• Computer cannot search updates

  I get an error message for the few weeks that my computer cannot find the updates. It comes with the error code 80070005. I tried to find answers under this code without success. I tried the automatic "fix - it" who does not work either.

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate.  What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. Save the file on your desktop zip and extract the file:
     -Right-click on the file and select extract all...
     -Click Next when prompted for the Destination.

     Therefore, you should see a folder called AccessChk on your desktop.

  3. Open the folder AccessChk

  4. Hold the SHIFT key and right-click in the window.  Select "open here command prompt.

  5. A command prompt window should open a similar message:
     C:\Users\\Desktop\accesschk >

  6. Type the following command and press ENTER:
     "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
     Tip: You should be able to copy and paste the command into the command prompt.

  7. Close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. Double-click Accesschk.txt (text file), it should open Notepad.

  9. Copy and paste your results with a new question in the forum of Windows Update.  (Make sure that you write 0x80070005 in the subject).

  Reference1

  If this is not enough: -.

  1. If please download the subinacl.msi from the following link and save the patch to installation on the desktop:
      
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
     SubInACL (SubInACL.exe)
     SubInACL is a command line tool that allows administrators to get the security information on files, registry keys, and services, and the transfer of information from one user to another, from local or global group to and from a domain to a domain.

  2. Please, go to the desktop and double-click on the downloaded file.

  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. Click the "Start" button in the "Search" bar, type: "Notepad" (without the quotes) and press ENTER.

  5. Copy the following commands, and then paste them into the opened Notepad window:
      
     off @echo
      
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
      
     @Echo =========================
     Completed @Echo.
     @Echo =========================
  
  @pause
• After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
• View the desktop and right click the reset.bat file, then choose "Run as Administrator".
• You will see a window of type BACK treatment.
   

NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

Reference2

This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

• Cannot delete user records

  Before going any further, I know that I can't.  Now, please read on.

  I created a new standard user account (let's call it the NAME) in first Grade, went to connect to it and got the message:

  Unable to connect "the user profile Service service has no logon. User profile cannot be loaded. »

  So I went back to my original admin account (call the ADMIN), removed NAME and put in place again.  This time, I managed to log on successfully.

  However, I've now eaten dog in my user folder, namely the following new folders:

  NAME

  NAME.COMPUTER - NAME

  NAME.COMPUTER - NAME.000 - that's the new version of the account NAME

  TEMP

  I thought that a system restore might do the trick, but the last two have thrown an error, would have been nothing changed.  I tried with another earlier and it worked.  (All three were the day before, I put in place FOR the first time).  I am now just my ADMIN account, confirmed by being the only one to appear in the CP and the only key S-1-5-21 to appear in HKLM\...\ProfileList and HKEY_USERS, where before there had been another for NAME.COMPUTER - NAME.000.

  But I still have these thugs records.  I searched the registry and there is no mention of them anywhere, but they will not yet clear.  They warn that they are shared, I continue, but it seems that I need the SYSTEM permissions to remove.  I am logged on as administrator, I know that's not always enough, but when it comes to permissions, everything goes over my head (even if in principle, I know what they are).

  Because the records are nowhere mentioned in the registry, I though maybe I could remove it from the command line with elevated privileges.  There is no message error but back in Windows, they are still there.

  I have now run out of ideas.  I have read several related articles, but, as is often the case, none seem to answer precisely in these circumstances.  The answer is probably there, but I can't see what I'm skating on the edges of my technical expertise.

  If someone the spirit infuses me a bit please?

  Thank you

  DD

  That should be good to remove. Just make sure that your own account (or a group you are a member) already has access to the folder so that you do not yourself finish locking.

• Desktop HP Pavilion p7: user profile service does not connect, cannot load user profile

  What happened to a certain number of times now. When I try to log on my user profile, it indicates that the user's profile could not and cannot be loaded. I should know how to handle this problem but it was a few months ago and I don't remember how to access my profile. Can you help me? Also, is there a way to simply build a new profile instead of trying to solve the old one every few months?

  One of the fastest ways did a system restore to a date prior to the issue. Start in Safe Mode - once in safe mode, start / all programs, accessories, system to System Restore tools. Choose a restore date.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Here, the document shows ways to fix or create a new user profile:

  https://support.Microsoft.com/en-us/KB/947215/

• 8024402 cannot search the updates of Windows

  Hello

  Vista 64 HP with many problems. Has been purchased already installed by manuf. may 2009. Sent to them Jan 2010 to recover or reinstall the operating system due to the loss of the ability to install/uninstall programs after SP2. Now Windows Update (among many other things) has stopped working (apparently since March), even if the update is set to automatic. When I try manually 8024402C error code stops the attempt and it says that Windows could not search for new updates. Also, since on 25 March, I have been unable to use Windows Live Mail (freezes) and McAfee Site Advisor stopped working but is not disabled. Also have problems copy photos or documents and from my external hard drive; photos say the missing properties. Cannot change the documents if they are on my external (although I can change if external is connected to my Windows XP computer).  I disabled my antivirus/spyware/firewall and tried UPDATE but still the same error. I have been seeking assistance with Windows Live Mail since the start of freezing March 25 and isn't odd that UPDATING claims is the last attempt made on 25 March 2010 at 05:35 and the latest updates of installed Windows were as of 03/23/2010 at 06:53. What has been actually updated the 3/23 was "IE 8 compatibility view for WinVista 64 list based systems (KB980302) but I've seen compatibility disabled (unchecked). Windows has updated anything since 23/03/2010.

  I am totally frustrated with HP64 Vista. Help, please.  Thank you

  1. McAfee (and Norton) applications are notorious for not not upgrade (or uninstalling) itself. See if this triple McAfee fix solves the problem: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  NB: #1 correction of the triple step has you uninstall the McAfee application. After that, make sure that the Windows Firewall is enabled.

  NB: Keep this useful link. Chances are that you will have to redo the fix three steps every time that the McAfee application is automatically upgraded to a newer version.

  2. now run this difficulty in default and aggressive modes: http://support.microsoft.com/kb/971058

  3. restart & test.

  Comment: Little, if any, security experts have a very good opinion of these ISP freebies.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• "The service cannot logon user profile Service" - Please Help

  Hello

  First of all, I'm not very computer so when things like this happen it kind of scares me.

  When I stopped my laptop last night Windows said it would install updates.  When I turned on this morning my profile (the only one on the machine) opens, but a couple of windows programs said they couldn't find the path and would not work (like the sidebar).  This is not the first time that this has happened so I restarted the computer so that they would work next time.

  I put my passwrod in the profile login page and a message stating "the service user profile service does not logon, the user cannot load profile.

  I turned on the computer and a couple of times, but I still can't access.

  Can someone please help?

  I have an Acer Epower restoration on my external hard drive (to save hard disk space).  I can use it and is anyone know how?

  Help, please.

  Kind regards

  AstoriaBoro

  Hello

  You can try the system restore of Mode without failure, recovery, or a Windows disc.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Have no knowledge of these tools Acer - maybe they are available and help - remember
  I don't know what they will do.

  ========================

  Other wise its back for the links above and a step at a time.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• "The service user profile Service has no session opening, cannot load user profile"

  My Dell laptop has lack of battery while I was still logged in Vista. When I turned my computer back on I asked that she was 'started normally'. So took me through the Windows username and password screen. I entered my password and received the error message that is mentioned in the title.

  I tried a system restore, but this has not solved the problem.

  Any help would be appreciated

  * I have omitted the part system restore because you already said that you did, and there no recherche.* *.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly press F8 key until you see a black and white screen. The top/down arrow and select Safe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, run the Microsoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft technical support below.

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application

  Another tiutorial from a different source
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Cannot change user: "the user profile service has no logon. "User profile is not found."

  When I try to do on my side of the computer (change username) it says «user profile service does not log» "User profile is not found."

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot switch user accounts

  I have two user accounts on my Windows Vista Home Premium system. Both have been implemented as administrators, but one account was changed to the user 'Standard '. Once this change has been made I could no more switch users or make other changes to the users. Given that the current account is only a Standard user, it can only perform basic functions so I can't try to restore the system before the change. If I try to change the only guest user I give is of the ASP.NET Admin account asking for a password that I don't have. Via Explore, I can see users, but cannot access that I see the guest of ASP.NET.  How can I pass on my admin account?

  Sign out and then sign in to the account Admin Steve Winograd, Microsoft MVP (Windows desktop experience)

• 'Documents' folder (plain text) Foxpro. PRG files and cannot search for find in files

  I have 64 bit Win7 Pro.

  I have a C:\Users\Owner\Documents\PRG folder with a number of Foxpro. PRG (plain text) files.  I can't get Windows Search to search for files.  For example, several files have the command "TO PAINT" in them.  If I bring up an Explorer window and use PAINT, I just get 3 file names that have PAINT in them without a content search.  I've read other suggestions to use ' content: 'paint' ' but that no results me at all.  I tried another suggestion: a window withCMD searchFile-name: "*." ' * ' - content: "painting" and got an error that says'searchFile' is not recognized as internal or external, command an executable program or batch file.

  I have to install a UNIX client to get a search utility that can find things I need?  At this point, I'll take something that actually works.

  If you type a Search in the research area, scroll down to change the way Windows search. The first page allows you to change the folders that are included in the search.  Under the buttonAdvanced -> File Types , you can select which extensions are included in the search.  You can also add a new extension if it is not listed.

  See you soon,.

  Barbara