Mark an object in real time on a displayed video acquired of a USB camera

Similar Questions

• How to measure and mark the value of real-time data?

  Hello

  I need to measure and trace in time real RMS value of EMG power. I did a VI. But I don't know why it didn't work. Can someone help me please? My VI is set in 2013 and 2011 both version. An example of data is also attached. Thanks in advance.

  Taslim. Reza says:

  I tried RMS PtByPt VI. But it has not been wired because the source was table 1 d of double and double sink.

  Well, ptbypt tools affect only one value at a time, so you must place them in a loop FOR. Here's how.

• Unable to see the real time data to display for an access database

  
  
  I am using the following:
  
  ASP.net c#
  Server 2003 Sp2.
  PS CS3
  Access db
  
  I am trying to connect to a 'local' database on my server.
  I use the database connection string"
  
  Provider = Microsoft.jet.OleDb.4.0;
  Data Source=C:\catalog\Catalog\files.mdb;
  Persist Security Info = False
  OLE db connection
  
  While in the data link properties window, the connection is successful, but in the ole db connection window I get "an unidentified error has occurred".
  
  If I just press ok I can't see one of the table in my db.
  
  All I want to do is to configure the display of live data
  
  Thanks in advance for your help.

  "madhooper" wrote in message
  News:fcc6vt$JD6$1@forums. Macromedia.com...
  >
  >
  > I use the following:
  >
  > Asp.net c#
  > Server 2003 Sp2.
  > DW CS3
  > Access db
  >
  > I am trying to connect to a 'local' database on my server.
  ' > I use the database connection string.
  >
  > Provider = Microsoft.Jet.OLEDB.4.0;
  > Source=C:\catalog\Catalog\files.mdb data;
  > Persist Security Info = False
  > ole db connection
  >
  > While in the data link properties window, the connection is successful, but
  > in
  > ole db connection window I get "an unidentified error has occurred."
  >
  > If I just press ok I can't see one of the table in my db.
  >
  > All I want to do is to configure the display of live data
  >
  > Thank you in advance for your help.

  You have configured your server to test?

  Set up a test server
  http://livedocs.Adobe.com/en_US/Dreamweaver/9.0/WSc78c5058ca073340dcda9110b1f693f21-79e0.h tml

  Preparing to build dynamic sites
  http://livedocs.Adobe.com/en_US/Dreamweaver/9.0/WSc78c5058ca073340dcda9110b1f693f21-7a31.h tml

• a pc with a stand-alone module, real-time can display of its own data

  Hi all

  It is sort of a basic question, and it's probably why I can't find the answer explicitly in textbooks or the forum posts.

  If I want to use a PC as a unit in real time, and I install the LabView time real OS on it and make an Application of real-time on another machine and compile it in the PC target in time real LabView, can I attach a monitor or a kind of screen directly to the PC unit in real time to display some data I need?  Or do I still need a Labview PC to act as a host for display data and interface with a user?

  Thanks for the info!  I have some experience of labview, making some other applications but I have never used the RealTime module yet so I don't know much. So if there is a good place for more information in time real LabView for use a PC as a device target, which may also be of interest and would be appreciated!

  Thanks again.

  Steve

  Hi Steve,.

  Our objectives in real time are designed to work in headlessly, which means that they are independent and have no user interfaces.  It comes to screens.  For a display of information, you must use a host VI, on a host computer. There are several ways to move data between a target RT and a host PC including, but without limitation, TCP, UDP, network flow, published static Variables of network and Web Services.  These are all covered in documents on best practices.

  Here is a page real-time best practices:

  http://zone.NI.com/reference/en-XX/help/370622J-01/lvrtbestpractices/rt_portal/

  Here's a page on the conversion of a desktop computer to a target RT:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/2733

  Good luck with your project.

• MAX cannot find two usb cameras at the same time

  Hello

  I want to use two cameras usb (Thorlabs DCC 1545 M) in NOR-IMAQdx in Labview, but it cannot find a single camera (the one plugged earlier), and also a single camera is shown in MAX. Both cameras working in the manufacturer's software, and if I unplug the 1 unit, the 2nd will be displayed in MAX after a refresh.

  I found that one camera is supported for each USB hub in Labview, and all USB ports in this computer correspond to a same hub online. I don't know if this is causing the problem.

  In fact, I need to take the picture in both cameras at the same time, a switch programmed between the two cameras will work for me.

  Any suggestion and comment will be appreciated.

  Hello Hosni,

  According to this link, you can acquire from multiple USB cameras simultaneously.  The limitation is on the manufacturer and how they interface with the bus of DirectShow.  When you use two cameras of the same make and model, it sometimes happens that not enough information is not IMAQdx to distinguish between the two cameras.  When you switch to MAX cameras, they come as different cameras, or they appear actually virtually the same?

  Since you said switching between them might work, I found an example that does just that.  Just make sure you give a name to each camera single camera.  I hope this will be useful for you.

  In addition, there is a bit of discussion on this topic on the forum of discussion already.  Check out these related threads, or use the search box to search for more.  There is much information available!

  http://forums.NI.com/T5/LabVIEW/multiple-USB-cameras-in-LabVIEW/m-p/833517

  http://forums.NI.com/T5/machine-vision/two-USB-camera-identification/m-p/2193960

  http://forums.NI.com/T5/machine-vision/synchronized-capture-for-multiple-USB-cameras/TD-p/1879647

  http://forums.NI.com/T5/LabVIEW/multiple-USB-camera-image-acquisition-using-vision-acquisition/TD-p/...

• I want to hang the Tower up to my big screen and instead of using a keyboard, I bind a tablet that I can use as a keyboard and to manipulate objects on the screen in real time

  I am in the middle of do a remodeling and think about a furture upgrade my PC at home, I want to hang the Tower up to my big screen and instead of using a keyboard, I want to connect a tablet that I can use as a keyboard and to manipulate objects on the screen in real time. Is there a way to do this?

  (1) before the PC upgrade, please read the complete technical documents for all devices

  you want to go to upgrade

  (2) it is the first thing to do to make complete lists of materials you want to change.

  Compare specifications detaily, note important diference between many of the same features

  (3) for more information on some devices and materials, see link below

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

• Toolkit of Real Time Execution Trace functional limitation on targets NI Linux real time taken in charge

  We want to start by using the Toolbox in real-time to backtrace of memory allocation profile on a target of cRIO 9035 & 9039.

  The product information (http://sine.ni.com/nips/cds/view/p/lang/nl/nid/209041) page has a note indicating that the Toolbox has limited functionality on real-time OR-Linux supported targets.

  However, I couldn't find any specific details about what are these limitations.

  If anyone can clarify which restrictions apply?

  Are there alternatives (party packages) that offer a feature more complete?

  Hello Jörn,

  Did some more research, the following limitationrs occur on targets LInux RTOS,

  -The Manager of memory when used on targets of Linux, saves only data for LabVIEW processes and threads, not the global memory of the systems.
  -Wait object are not recorded events
  -Trace buffer size cannot be changed
  -Timed loop pre-emption and reactivation of SRI events are not marked

  Hope that this information helps out you in addition,

  Kind regards

  -Natalia

  Technical sales engineer

• Is there a way to know what physical events are happening in real time?

  I just had a problem from my phone since last week. I wouldn't do something unusual. Knows running programs with regard to my knowledge and visible only windows are concerned. And my hard drive would be thrown open. I don't know which program is the cause. So I asked for help in the windows event viewer and look under hardware events because that's what I thought would contain the event in question. but it was empty.

  I'm here to ask you all, if anyone can help in this regard.

  Amit

  Hello

  Check these:

  Scenarios selected for monitoring performance with Windows Vista
  http://TechNet.Microsoft.com/en-us/library/cc748962 (WS.10) .aspx

  This free utility makes it easy to check the event logs - since you can check everything
  entry in the final minutes or other periods of time. Any or all of the event logs can be saved
  then deleted to make it easier also for future entries to read.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  z http://www.Nirsoft.net/utils/my_event_viewer.html

  =======================================================
  
  Sysinternals has utilties that can help such as Process Explorer, Process Monitor and others. Those
  and others are below.

  This is a pretty complete performance convenience store and a lot of these methods will contribute to
  your effort.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• MacAfee says real-time internet security disabled during access via Firefox.

  Although the Green OK of MacAfee sign illuminates when accessing e-mail in xplornet.ca via Firefox (my default), a message tells me that MacAfee real-time protection is disabled. By clicking on the button 'Activate' returns me seconds to red alert "off."

  This has happened

  Each time Firefox opened

  Hello Mark.

  Well maybe not related to your problem, I have to remind you that the version of Firefox you are using right now has been deleted and is no longer supported. In addition, he has known unpatched bugs and security problems. I invite you to upgrade to the latest version of Firefox, for maximum security, stability, performance and ease of use. You can get it for free, as always, to getfirefox.com.

  What about your problems, you must contact McAfee support.

• Debugging on a real-time target - deployment issues

  Dear community,

  After RT my 9651 sbRIO module wiring code, I do tests to check the intended functionality. For this I start my main VI who deploys the code on my SoM and I can happily move forward with my debugging session.

  Sometimes, however, while in the process of deployment, I get an error saying:

  [VI - name] .vi loaded with errors on the target and was closed

  When I open the VI it has no errors and the VI should work a fine might think.

  My solution was so far of the VI, just open move the wires and terminals round, re - save the VI and this is the deployment works.

  This trick worked for a while, because deployment error ca occur arbitrarily on different VI making debugging quite cumbersome.

  I then went ahead and just run the wrong VI in RT mode by moving terminals and structures around to get the VI runs in mode debugging, but it is very time consuming.

  Given that 3 people working on this project and we use git-subversioning I also do not want to "touch" each time just screws for the debugging session will without actually modifying the feature.

  Has anyone encountered a similar experience or perhaps found a magical setting to avoid this subject a lot of time?

  Hello

  If solutions already present Spex does not do the trick for you, clearing the cache of the compiled object can help.

  For more information, take a look at the following link:

  Why my screws are loaded with errors when it is deployed at my target in real time? -National Instruments
  http://digital.NI.com/public.nsf/allkb/7F6502FF0560FA9086257EB3005B13BA

  Concerning

  Alex

• Control of data using multiple thermocouples via indicators and the waveform in real-time

  I apologize in advance for this question is probably a bit simple but I'm all new to labview and the forum and could use some advice. I have a CompaqDAQ with two 9213 16 modules of track and I'm trying to read in 30 thermocouples in a waveform, but also display 30 indicators so I can mark each indicator with the thermocouple for real-time tracking. Each thermocouple corresponds to a specific location and it is essential that the interface has an accurate indication or a label for each of them. I wonder if there is an easy way to do this in addition to split the signal and have 30 thermometers on my diagram? Perhaps a table any? If I use a table to create 30 thermometers, the DAQ assistant automatically sorts the thermocouples according to ascending numerical order. For example, would be the indicators of first and second on my interface automatically assigned to channels a0 and a1 of the first module, or should I do it manually? Even for the waveform?  Thank you very much!

  PS - Do not know if this message had need of more details, but let me know if more information is needed, and I'll give you!

  I see that you use the DAQ Assistant to create your task.  Now I understand why you may have about labelling.  It is easy of the seller NOR spiel booting...  But in any case, you already have a task to the MAX instead of use the DAQ Assistant?  The interface is similar and there may be a step or two, but your end application will be more effective and you will have more options with your data and properties.  For example, I tried to update the names of physical channel in the DAQ Assistant installation program, that it let you do, but it propagates that change forward to waveform chart legend.  Also, I don't know any property for this dynamic data type node, although I never use it either.  I suggest the setting up of your task and channels, Max if you'd give it a go.

  Since I thought I didn't really takes you all the way with you help, I wrote another one.  It uses a cluster, even if it's a bit barbaric.  I thought that there was a more eloquent way to do by changing labels, but I could not it works as I had expected.

• Updated in real-time with text of exec system indicator

  I was wondering if anyone knows how to get LabVIEW to update an indicator of text with information from a command prompt in real time?  So, as if you ping IP show he ping and not just wait until the end to update it.  I try to have a batch file that processes the code displayed on screen so that the user can see that she is running and that it is not frozen.  When I ran the test originally she had a cmd window pop up and show that information was passing.  Since I opened the program with the exec system, it no longer displays anything so I thought that if she showed in a text indicator the problem could be solved.

  Thank you

  Derek

  Help for the system Exec VI

  (Windows) To use a DOS command, insert cmd /c before the command.

  Then try this way the system Exec VI

  cmd /c 172.18.81.54>"C:\temp.txt ping.

  Change the IP address to your needs.

  The quotation marks around the path is necessary if you have spaces in the path of the file.

  Now when you do this you will get nothing back from the exit of stardard, because you have redirected it.

  The results should be read from the file.

• can't see changes to the photo in real time during editing

  Hello

  When I edit photo it won't let me see the changes in real time, unless I turn down hardware acceleration. I tried the update of windows and even downloaded the drivers two charts, but no solution. I read may be due to software mcafee, but I do not use mcafee...

  Thank you.

  Hello

  When I edit photo it won't let me see the changes in real time, unless I turn down hardware acceleration. I tried the update of windows and even downloaded the drivers two charts, but no solution. I read may be due to software mcafee, but I do not use mcafee...

  Thank you.

  ==================================
  If reducing the graphics hardware acceleration
  improves the issue... it's a strong indication that
  you have a problem with your video driver.

  Might be interesting to try to find the support Web site
  Mfg. of your video card for a Win update
  XP compatible video driver. Or... If your computer
  is a laptop... look for the support site for your computer
  Reference of the manufacturer.

  If you do not know the make and model of your
  Video adapter, see the documentation that
  supplied with the computer.

  Also you can find info on your video by driver
  go to Device Manager: you can launch
  By clicking Device Manager on... Start/run and
  type or copy / paste:
  devmgmt.msc
  And then press ENTER.

  Expand "Graphics cards" and right click
  the name of your graphics... then
  choose... Properties / tab pilot... FYI.

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. In addition, installation
  instructions that should be followed closely
  should be available on the support site.

  Once installed the new video driver... you
  can restore your full acceleration.

  Aslde the... If your editing functions have been
  working properly and suddenly changed... I am
  wondering if one of your Windows updates...
  updated your video driver.  Sometimes the new
  driver is not as functional as the one you have already
  a.

  System restore would have been an easy way
  to correct this, but maybe you could go to the device
  Manager and rolling toward the video driver earlier.

  (FWIW... it would be a good idea to create a system)
  Restore point before making the change)

  You can launch the Device Manager by going
  TO... Start/run and type or copy / paste
  devmgmt.msc
  And then press ENTER.

  * Proceed at your own risk *.

  Expand: Graphics cards
  Right-click on the name of the video card and
  in the menu choose... Properties / driver tab.
  Roll the button return to the version...

  (306546) HOW to: use the driver to restore roll back feature
  a previous Version of a device in Windows XP driver
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;306546

  Windows XP - Vista - 7 - restore video drivers.
  Removal instructions
  http://www.nvidia.com/object/driver_rollback.html

  How to roll back a faulty device driver
  for a Version prior to Windows XP, Vista and 7
  http://www.techsupportalert.com/content/how-roll-back-misbehaving-device-driver-previous-version-Windows-XP-Vista-and-7.htm

  Good luck...

• Real-time scanning and firewall disabled

  Every time I turn off my pc, the sacnning in real-time and the firewall are disable... and it happed after I purchsed online McFee, I used to have Panda Antivirus for Netbooks and used to work in perfect!

  I will never againg buy McAfee products, I told my two sister not to buy any product from McAfee for their pc... and I have already said that most of my friends not to buy no matter what McAfee Antivirus...

  .. .it really sucks...

  I recommend that you uninstall McAfee using the special removal tool: http://www.softpedia.com/get/Tweak/Uninstallers/McAfee-Consumer-Product-Removal-Tool.shtml (not just uninstall because it works well and you will have problems with the system itself, as well as with the installation of other products).  If you just bought it, it may still be in some kind of trial period and you may be able to get a refund if you have already paid for it (you should check with them on that).  Explain your problems, if necessary, and that you intend to report on blogs and everywhere you can and they may decide to make an exception if at first, they refuse to allow the return.

  Once done, reboot and you should now be able to re - activate the Windows Firewall. http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off Check to ensure that the parameters are still accurate that McAfee could change their.  If this isn't the case, after return and we will try to understand how they disabled so we can reactivate if the normal process does not work.

  Then, you need something to replace McAfee for AV / AM fine.  I recommend Microsoft Security Essentials for free at:http://www.softpedia.com/progDownload/Microsoft-Security-Essentials-Download-131683.html for analysis in real time on the daily basis and periodic analyses of rapid or complete.  I also suggest the free Malwarebytes to:http://www.malwarebytes.org/mbam.php don't not running constantly, but in order to update and do a full scan every few weeks or just to catch whatever it is, MSE could miss.  These two products are much better than McAfee and don't cause you problems that you had to deal with.  Here's what I use and I had no problem (and no infections that were not intercepted and completely removed by one or the other).  Either way, I used myself the Panda for several years before moving to the MSE and I have nothing bad to say about them - their product is very good - but why pay for something when there are free alternatives that are almost everything as good (maybe even better)?

  I hope this helps.

  Good luck.

  P.S. Be grateful it is McAfee and Norton not - so you could be even greater problems.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• SSM-10 real-time monitoring

  Is there a way to receive notifications on ssm module security events in real time, I installed in my ASA? Are some that traps SNMP the only option? Sensor health section has also on the prevention page home/Intrustion ASDM, recovery of events marked as critical "not consulted. How can I erase this? I view the events of the module, and this does not erase it. Does have to do with the product MARCH?

  You can use IME to monitor IP addresses in real-time. It also supports the management of events in real-time for IPS five devices. Have a look:

  http://www.Cisco.com/en/us/products/ps9610/index.html

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5729/ps5715/ps9610/data_sheet_c78-459033.html

  It is freely available to all customers have a valid service contract. Make sure you that you run 6.1.x code to use the IME performance management features.

  Concerning

  Farrukh