Cannot select 2055dn trays in Snow Leopard

Similar Questions

• Cannot synchronize my mac with snow leopard 10.6 with my itunes on iphone

  I use MacBook with Snow Leopard, version 10.6 and sync to my iphone with itunes 6.

  For these last months, the computer commented that the itunes on the iphone was not updated and cannot sync.

  But the itunes on the iphone is the latest version. Is the obsolete software in my MacBook? What should I do?

  Operating system of your computer is obsolete. A device running iOS 9 requires Mac OS X 10.8.5 or newer for synchronization; a MacBook must have an identifier of model at least MacBook5, 1 to run a compatible operating system.

  (143247)

• Cannot complete the Installation of Snow Leopard on MBP 2009

  Hello! just got a 2009 MBP, it ran very nice El Capitan, but I decided to downgrade to ensure best performance on older operating system.

  So I got this Snow Leopard DVD, everything was OK, then on the first boot, when you select the country/keyboard/account etc...

  at some point in these steps, MBP just freezes, pointer starts rolling in all the beautiful colors and nothing else. Also, a few minutes later MBP shuts.

  Should I mention that first I have deleted all the disk HARD, maybe isn't properly? On the first attempt to Snow Leopard could not begin installation, and then to recover, I think I did it right.

  Now every time MBP try to complete the installation of SL, but freezes.

  I can't go into Recovery Mode or Safe Mode, cmd + r / alt does not work no matter how faster I press on them.

  Any help? Please, I beg you!

  Cheers.

  There is no recovery mode installed with 10.6, so "can not enter Recovery" isn't a mystery.

  Boot from the DVD and check your hard disk with disk utility. If you wait one quarter minute after having responded to the 'what language?' question, the menu bar is displayed, all you can choose disk utility menu.

• Cannot parse after upgrading to Snow Leopard - C4580

  I have the HP all in one single C4580. No problems of printing or scanning up to that I've upgraded to Snow Leopard. I can still print but I can't scan unless I have used Image Capture. The printer does not appear in the window HP all in one device selector. I did set up the wizard again but my home network says that the server has failed and will not recognize the scanner. Anyone with the same problem?

  [title edited for clarity]

  You still have the HP software for 10.5 installed.  It does not play well with 10.6.  Let's remove this way:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  You do not have the software now since Snow Leopard as well print & scan drivers built-in. scan from Preview apps or Image Capture. Scan from the front panel of the printer does not work yet.

• OfficeJet Pro 8600: OfficeJet Pro ePrint 8600 - cannot select paper tray - HP needs to fix this problem

  This is a limitation of the software that HP needs to fix. I bought this machine multifunction largely for two features, ePrint, and two bins to paper. I had released two paper because I often need to print on paper thick and does not want to manually load the cards into the printer whenever I don't want to print on thicker paper. Unfortunately tray 2 is not compatible with card stock so I keep copy regular paper in tray 2 (tray 2 is defined as the default tray) and I keep card stock in Tray 1, which is compatible with cards. The problem and the limitation is when I am traveling and want to use ePrint. Even if my default tray on the printer is 2, which is where the paper is, if I use ePrint to print, HP ePrint by default tray 1, which means that I print on thick paper. This isn't only a problem when you travel. One of the advantages of the ePrint, in theory, is I can print on my desktop at home via ePrint printer when connected to my VPN employers. I've had this machine for two years. It seems that HP would have an update now to solve this problem. So far, nothing. Frustrating!

  Hello @HudsonOH,

  Thanks for posting in the forums of HP and welcome.

  I understand that you are not able to choose your paper tray of your HP Officejet Pro 8600 Premium e-all-in-one using ePrint. I would like to help with this, as much as I can.

  Unfortunately, when you simply send an e-mail to the printer, you cannot change the print settings, because it uses the default settings on the ePrint server.

  However, if you have an Android or iOS device, you can download the HP ePrint app. This allows you to add the printer by ePrint e-mail address and send print jobs when you are not with the computer (need you an active wifi or data connection, however). The application also allows to select print settings if you can ensure that you don't waste card stock paper you loaded in the machine.

  To download the app on iOS, simply open the app store and type 'HP ePrint' in the search bar.

  To download the app on Android, you can open the store game (or game of Google) and search for "HP ePrint.

  Once you have installed the application, you can add your printer via his email ePrint:

  1. open the ePrint application and select OK on the demo screens.

  2. Once you reach the home screen, it will show your printer name, or not find printers (depending on whether you are at home with your printer, or on the go). Select this check box.

  3. you will see a tab at the top that says all, select it.

  4. press on the + symbol to add a printer.

  5. Enter your ePrint e-mail address and select Add.

  To print using the application, return to the home screen and select an item to print one of the options listed. Note: If you are on iOS, you can even add your e-mail information in the application so that you can print emails.

  In addition, you can sign up here for updates on the new firmware and software for your printer, in which case no alternative workaround should arise: stay connected with updates from HP

  I hope this helps!

  

• iMac under Snow Leopard - SCANNER COMMUNICATION CANNOT BE ESTABLISHED: HP LaserJet CM1415fnw

  iMac under Snow Leopard, reverend 10.6.8. New HP LaserJet CM1415fnw

  Printer works, emailing and printing of documents wireless; However, scan has already worked.

  I have my printer works wirelessly...

  I've updated to the last s/w Snow Leopard by Apple as of today.

  I cycled power on the iMac, and the printer HP several times.

  On iMac error message when try to scan: SCANNER COMMUNICATION CANNOT BE ESTABLISHED: HP LaserJet 300 colorMFP M375nw is currently unavailable. Make sure that your device is turned on, check the connection and make sure that your network is working properly. If these conditions are correct, restart the device and try to scan the image.

  Hello

  According to the error message, it seems like test software communicates with a different printer than the CM1415.

  Open the HP Scan 3 application, located under Applications > Hewlett-Packard.

  Click HP Scan in the top menu, then click Preferences.

  Be sure to select the HP Laserjet CM1415 drop Scanners, close its window and click on the scan button.

  You don't see any cdifference?

• MacBook (13-inch aluminum, Late 2008) cannot install snow leopard

  So I'll try to fix computer for my mother, it's a MacBook (13-inch aluminum, Late 2008).  He was running very slowly so I did a factory of resets and tried to install a copy of snow leopard on it.  When I try to install it on my hard drive it says "Mac OS X does not have this disc."  The symbol for the hard drive has a yellow! sign on it (if it matters).

  (1) my question is what can I do to install the OS on this?

  Mavericks - OS would not install, I tried this right after the factory restore.

  -Unfortunately I can't eject the disc either-

  (2) that it has to do with my drive hard and how can I test that?

  Whence it the Snow Leopard disc? You must use a copy of Snow Leopard retail. You can buy Snow Leopard at the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (US). The price is $ 19.99 plus tax. You will receive a physical media by mail after placing your order.

  Snow Leopard erase and install

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears, wait for loading to complete.
  4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of partitions of one (1) in the menu dropdown. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
  8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

• Cannot print after Snow Leopard

  Is no longer, I can print or do anything with my Photosmart 2610 all-in-one.  I reinstalled from the disk, but discovered that the software is not supported by Snow Leopard.  I uninstalled the printer and downloading the new software for HP which is supported by Snow Leopard and that did not help.  I tried everything I could find on the support and nothing has helped.  Help, please!

  Hello
  I would suggest to run cleaner that will remove the complete printing software then reset the printing system, then download and install your printing software from the link given.

  Run the cleaner:
   
  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Reset the printing system:

  -System Preferencess, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it and wait for the button 'Add '.

  becomes available. Until it clicks.

  Here is the link to download the software of the printer.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77061-1&LC=en&DLC=en&cc=us&OS=219&product=421134&sw_lang=

  Say 'Thank you' by clicking on the star of congratulations in the post helped you.

  Please indicate the position that solved your problem as "acceptable Solution".

  Kind regards
  Jonathan.

• Cannot see function analysis using printer sharing on Snow Leopard USB connection

  I have two iMacs connected via ethernet to a wired ethernet network cable / wireless. Previously, my PhotoSmart C7280 is connected wireless network, and I was able to scan and print from any computer using software built into Snow Leopard. Scanning and printing has been a bit flaky lately due to wireless network problems, so I just moved the all-in-one at one of the iMac, it connected via USB and enabled printer sharing. I can now print and scan from the iMac to which it is connected, but when I access it from another iMac, all I can do is printed. For example, if I open Preferences system and then select Print & Fax, I can add the printer to the list of printers OK, but when I select the PhotoSmart from the list, I don't see paws print and scan that appeared at the top of the pane that results. I can access only the features of the printer. I have already reset the printing system and start again, but still no scanning. Any ideas?

  Well Yes, that's the way it works.  It is a sharing of print - only.  This configuration will not share the scanner.

  We will work on your network issues?

• Cannot install on Fusion 5 comments of Snow Leopard Server.

  I just got my new shiny Server Snow Leopard 10.6.3 DVD from Apple (Yes, it was $19.99 and I got on the phone, the operator of chat on the apple online store did know about this).

  I downloaded the trial version of vmware fusion 5.0.2 and tried to install. He always stops raise a screen saying:

  INSTALLATION FAILED

  Mac OS X could not be installed on your computer

  Setup failed to copy the required support files.

  Click on restart to restart your computer and try to reinstall.

  I tried several times. I thought that maybe something my old installation of VMware Fusion 2 created problems, so I followed the instructions to the 1017838 of the knowledge base article to uninstall everything. I deleted the app, even my old virtual machines. The first time I did that I must have missed something, because when I tried to install fusion 5 new he already knew my trial license key. So I went all uninstall - reinstall procedure more 2 times, restarting the computer between each course.

  Anyway installed snow leopard server on fusion 5 has?

  Advice appreciated. I need this facility for an older application that requires rosetta and this hack seems to be the only way I can get it.

  Either way, my host is a 5,1 Macbook running Mountain Lion. 8 GB of ram, 100 GB of free disk space.

  Thank you.

  Hi cmwoodand welcome to the VMware communities!

  We had a few reports that the disk of the server Snow Leopard 10.6.3 triggers a problem with merging and direct access to the physical disk.  If they send 10.6.3 media for this crazy business of $20, I suspect we'll see more of these problems...

  You should be able to work around it using disk utility on your host to make an image of Mac OS X install disk, and then attach the disk image of the virtual machine and install by whom.  (When you use disk utility, make sure that you select the drive of optical disc as the source of the image, not the media named "Mac OS X Server".)  If you picture the bad thing, your VM won't boot past the Apple logo.)

  See you soon,.

  --

  Darius

• Cannot resize the type area (CS5 Mac Snow Leopard)

  I can't resize the areas of type area. The small boxes of white circles at the corners and sides to select for resizing are missing. I tried to re-setup of CS5. I'm a long-time user of Illustrator, so I know how to create type box boxes as well as how to resize them. No clue as to what I should do? I use a Mac with Snow Leopard 10.6.4. Thanks in advance!

  Just to be sure, when you see the point of "Show Bounding box" on the view menu, this means that the bounding boxes are disabled. When you see the element 'Hide the framework encompassing' in the view menu, it means that the bounding boxes are turned on.

  So, in order to see the bounding boxes you will need to explicitly click the "Show Bounding box" item in the view menu. It is a command, not an element that indicates that bounding boxes are turned on.

  We could call it irritating.

• Cannot export bookmarks to Mavericks OSX.9 to OSX.6.8 Snow Leopard

  I am trying to transfer bookmarks from 25 FF goes into OSX Mavericks of 25 FF running in OS x Snow Leopard on another partition on the same computer. The. .Html or JSON files generated by Mavericks backup / export features, will not matter in FF in Snow Leopard. Selcting them has no effect. Can't open html files in a tab of the browser in Mavericks or Snow Leopard. Try to open or to import the .html files in Safari or the other operating system does not either - he tells me that I don't have permission to open the file (permissions are verified, they are ok).
  I'm puzzled. Can someone help me please.
  Ernst Gruengast

  Thanks for the tips.

  I tried this, but after a little violin, I found the source of the problem.

  When I create the .json files .html permissions read 'me' as the owner and "Everyone" does not have access. I had already changed this in Mavericks so that 'everyone' with rw permissions. But when I reboot in Snow Leopard under exactly the same user name) and observe the information area for the two files on the USB key, the name of the owner has changed. Always read "Everyone" with rw permissions, it does not open. I had to add another condition of permissions with my name and give him rw access explicit, then it worked.

• Cannot install Final Cut Studio under Snow Leopard

  I get the following warning when you try to install Final Cut Studio (version 3.0):

  ' - Final Cut Studio Installer requires that your system has 128 MB of VRAM; This system has only 0 MB of VRAM.' and

  ' - Final Cut Studio Installer requires that your system has a Quartz Extreme compatible video card. »

  I find it curious as I used to have FCS installed on this machine - but because of the disk hard failure I have done a clean install of the new. I vaguely remember getting hurt when I upgraded to Snow Leopard (years) but there is a solution because the software was already installed. All the suggestions of the community?

  My specs are:

  Mac Pro 1.1

  2 x 2.66 GHz Dual - Core Intel Xeon

  4 GB 667 MHz DDR2 FB-DIMM

  ATI Radeon HD 5770

  OS X 10.6.3

  A Mac OS X Combo update fixed this problem. The computer was not connected to the internet since installing the new hard drive and I remembered that the video card was not the original. So I connected and performed the update of the software and now Final Cut Pro is fortunately installation.

• Cannot select tray 2 copy with Officejet Pro 8600 Premium

  Win 7, 64 bit

  OfficeJet Pro 8600 Premium

  I installed the drivers on the disk supplied in the box. (Not sure if there is a new driver or an update yet for this product.)

  I bought this printer so that I could load my UPS package labels into a bar of tasks and plain paper in the other.

  I loaded the labels into Tray 1 (according to instructions) and paper in tray 2.

  I have everything works fine except that I can't understand how to specify tray 2 as the tray to make copies of. In respect of the COPY > SETTINGS > SET SELECT only Tray 1 is displayed.

  Issues related to the:

  (1) why not tray 2 option to copy? How can I fix it? A firmware update maybe?

  (2) printing these UPS labels from tray 2 seems to work very well. Is there a reason why this would be bad?

  Thank you!

  Connected by ethernet cable, he downloaded the new version of the firmware (... 1136BR).

  That fixed it! Tray 2 is now an option under settings to copy.

  The only disappointing is that I asked about a new version of the firmware in my first question... but it took a whole week to get this resolved... and I had little to get to the answer myself!

  In any case, now it is fixed and seems to work very well.

• Cannot print wireless since Snow Leopard upgrade

  I have an Office Jet all in one j6450. Since upgrading to Snow Leopard, I can't print wireless. I downloaded the new drivers. I also can I print a wireless test page so the signal is there, but I can't seem to print documents. I tried to uninstall, reinstall, perusing the printer utility, manually add the printer, etc, etc, etc. Any other suggestions? Thank you.

  Thank you very much, it followed all in good order and it worked!