Cannot see function analysis using printer sharing on Snow Leopard USB connection

Similar Questions

• I bought CS4 - have the box etc serial # - use an IMac with Snow Leopard - went to use the bridge and a screen came saying Adobe Bridge HOme Service was interrupted to concentrate on other resources... uh, I bought this software and how can we now

  I bought CS4 - have the box etc serial # - use an IMac with Snow Leopard - went to use the bridge and a screen came saying Adobe Bridge HOme Service has been discontinued for focus on other resources... uh, I bought this software and how it can now be 'gone '? Pls help - bridge is very convenient and I paid for it!

  See here:

  Deleted Adobe Bridge Home service

• Cannot print wireless since Snow Leopard upgrade

  I have an Office Jet all in one j6450. Since upgrading to Snow Leopard, I can't print wireless. I downloaded the new drivers. I also can I print a wireless test page so the signal is there, but I can't seem to print documents. I tried to uninstall, reinstall, perusing the printer utility, manually add the printer, etc, etc, etc. Any other suggestions? Thank you.

  Thank you very much, it followed all in good order and it worked!

• Print without CS4 + Snow Leopard broken color management

  I saw some comments in this forum about the printing problems with CS4, but didn't they would apply to me. They do, a lot of time.

  I print on an Epson 9800, convert the image to the Epson profile for that paper and then print using no color management. With CS4 + Mac OS 10.6, the colors are completely extinguished, and the unusable results and I couldn't solve by printing instead of CS3. I finally ended up installing 10.5 on a new partition, deactivate CS3 on 10.6 partition and installing on 10.5 partition (because the license Adobe treats the same program running on the same computer with different startup only two partitions different 'facilities'!) and then actually go back a generation in the printer drivers. Basically, this revives my computer because it was in 2007, and I can now print perfectly. I don't know if the latest printer drivers introduce problems or not and am tired of test print images.

  Of course, this means I edit the photo in 10.6 + CS4, then reboot to 10.5, print in CS3, then restart in 10.6. And of course I can't use CS4 for printing from CS3. Very frustrating.

  My questions are: (1) is there a document from Adobe that addresses this problem, (2) is Adobe aware of this problem, and (3) are there any other workaround who know other than to go back to CS3 + OS 10.5?

  A

  (1) No.  We always try to understand what's broken with Snow Leopard (since our code has not changed).

  (2) Yes, and we work closely with Apple and some suppliers of the printer to get the mess cleaned up.

  (3) some people have had luck with installing older drivers for MacOS 10.5, and others have not (depends on the model).

• Satellite C70D-A-111 - cannot print using network printer but the work of USB connection

  I added this Satellite C70D-A-111 to an existing network that includes a printer.
  Other devices can print OK but not this Toshiba.
  The message is "printer is in an error state.

  If I connect the Toshiba to the printer via the USB port, it prints OK.

  Can someone point me in the right direction please?

  Do you use this printer at home or in your business?
  I mean if use you it in your business ask for administrator assistance system.

• Cannot see, open, or use the SBH52 android app after download

  I use a Samsung Galaxy S3 4.1.2 Android running phone.

  After downloading the app SBH52 after the play of Google store on my phone, the application does not appear in the list of applications. But there is no icon. However, I see the app in the application manager. The only shown option is uninstall.

  I was informed by the support materials that the application can be used to update the device. It is not compatible with phones Samsung Galaxy S3?

  You need to install

  https://play.Google.com/store/apps/details?ID=com.sonyericsson.Extras.LiveWare

• Reformat using an external CD-ROM with usb connection

  Try to reformat my old laptop but my cd rom is broken when I try to do with an external cd drive via usb, the computer does not see the external cd drive

  Hi eeeLW,

  ·         Other not detected USB devices?

  Check if the drive is detected in Windows Explorer. To check if the drive is recognized by Windows, you will need to click Start, click my computer. Check if you can see the drive.

  Method 1: Make sure that the drive is detected in the BIOS (basic system Input\Output). Refer to the manual or visit the support Web site to do this. Connect the drive to a different USB port and check if it helps.

  Method 2: Run this utility of automated troubleshooting and see if it makes a difference.

• Mount a floppy using Vista Home Premium via a usb connection.

  I have upgraded from Win 95 to Vista Home Premium and I have a lot of players that have been compressed using Win 95, which I can't access like the Vista must be mounted. They can be mounted on the old system because it will not start. Is it possible that they can be mounted or accessible via Vista? Thank you very much.

  Buy a USB floppy drive. If you will be able to decompress, I can't say. It depends on what you mean by "compressed". MS - MVP - Elephant Boy computers - don't panic!

• Cannot install Adobe Air 2.0.3 on Snow Leopard

  Hello

  I've upgraded Air 1.5.x to 2.0.3, but failed with error #2038.

  After I have uninstalled adobe air and did a re-installation, but got the same error again.

  Can someone help me with this problem?

  Thank you

  Hello

  I'm sorry that you run into problems with the installer of the runtime.  Can you check to see if you have one of the following directories:

  /Users/ [username] / Library/Application Support/Adobe

  /Users/ [username] / Library/Application Support/Adobe/AIR

  If so, please set the following directories to be owned by your UserId and not the roots.  Please let me know if this helped.

  Thank you

  Chris

• Read the question using the first book (snow leopard) mac pro

  I installed Adobe creative suite 5.5 on mac pro (snow leopard). I tried playing my video edited and it does not work. I have read the FAQ and followed the instructions that never I found the forum messages. I reinstalled the product and fixed the administrator permissions. Can someone help me to solve this urgent problem. Thank you Michael.

  I solved this problem myself by searching the forum with the argument 'reading' 'playback_issue '. This a known issue. Go to the link of a solution http://helpx.adobe.com/premiere-pro/kb/playback-stops-loops-soundbooth-premiere.html

  Thanks to myself.

  Jim

• Cannot resize the type area (CS5 Mac Snow Leopard)

  I can't resize the areas of type area. The small boxes of white circles at the corners and sides to select for resizing are missing. I tried to re-setup of CS5. I'm a long-time user of Illustrator, so I know how to create type box boxes as well as how to resize them. No clue as to what I should do? I use a Mac with Snow Leopard 10.6.4. Thanks in advance!

  Just to be sure, when you see the point of "Show Bounding box" on the view menu, this means that the bounding boxes are disabled. When you see the element 'Hide the framework encompassing' in the view menu, it means that the bounding boxes are turned on.

  So, in order to see the bounding boxes you will need to explicitly click the "Show Bounding box" item in the view menu. It is a command, not an element that indicates that bounding boxes are turned on.

  We could call it irritating.

• MacBook (13-inch aluminum, Late 2008) cannot install snow leopard

  So I'll try to fix computer for my mother, it's a MacBook (13-inch aluminum, Late 2008).  He was running very slowly so I did a factory of resets and tried to install a copy of snow leopard on it.  When I try to install it on my hard drive it says "Mac OS X does not have this disc."  The symbol for the hard drive has a yellow! sign on it (if it matters).

  (1) my question is what can I do to install the OS on this?

  Mavericks - OS would not install, I tried this right after the factory restore.

  -Unfortunately I can't eject the disc either-

  (2) that it has to do with my drive hard and how can I test that?

  Whence it the Snow Leopard disc? You must use a copy of Snow Leopard retail. You can buy Snow Leopard at the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (US). The price is $ 19.99 plus tax. You will receive a physical media by mail after placing your order.

  Snow Leopard erase and install

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears, wait for loading to complete.
  4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of partitions of one (1) in the menu dropdown. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
  8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

• I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  External DVD USB drives are cheap. Usually $20 for a good quality player. Just buy one of these at Best Buy or another store and use it to install Snow Leopard. Then you also have a drive for something else that you have on the disk.

• 'PC' is not set up to establish a connection on port "file and printer sharing (SMB)" with this computer - I get this after enabling access to public folders and then trying to access (another pc on the network cannot connect to this pc but see).

  • Tried to reconfigure the firewall
  • Tried to change files and printers, sharing options
  • Restarted other computers trying to connect to my public folder
  • Tried to adjust the network discovery
  • Do all computers on the network among the same workgroup
  • I can access public folders from the other computer and their content
  • Other computers on my network, in my workgroup can see my public folders, and users, but cannot access it.
  • Other computers can see my computer, but can not access: error code: 0 x 80070035.

  Can't access: 'Public' and 'Users' in the title:

  -Network
  MyName-PC

  Please don't give me that: "If you try to connect to another computer, make sure that this computer is on, that you have enabled file and printer sharing on both computers, and file and printer sharing can communicate through your firewall." Because I seek NOT to connect to another computer... I want to just access MY Public folder and the users folder and eventually allow others to access also.

  Hi Katmandu774,

   

  Welcome to Microsoft Answers Forums.

  The Public folder is a convenient way to share files that are stored on your computer. You can share files in this folder with other people using the same computer and with people using other computers on the same network. Any file or folder you put in the folder Public is automatically shared with the people who have access to your Public folder.

  If you are not on a domain, you can limit network access to the Public folder so that people with a user account and password for this computer. To do this, turn on sharing protected by password.

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to password protected sharing, and then click one of the following options:

  ·         Turn on password protected sharing

  ·         Turn off password protected sharing

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To control the level of access to the Public folder

   

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to public folder sharing, and then click one of the following options:

  ·         Turn on sharing so anyone with network access can open files

  ·         Turn on sharing so anyone with network access can open, change and create files

  ·         Turn off sharing (people logged on to this computer can still access this folder)

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, make sure you add everyone to the public folder and give the necessary permissions to access it.

  Sharing files with the Public folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• not able to connect a printer shared in task force gives the access error is to deny cannot coonect

  not able to connect a printer shared in task force gives the access error is to deny cannot coonect

  Hello

  1. don't you make changes on the computer before this problem?
  2. What is the brand and model of the printer?
  3. What is the full and exact error message?
  4. have you set a password to the shared printer?

  Please answer these questions and provide us with more information. This could help us help you better.

  See the articles that may be useful.
  "Access denied" error message when you print to a network printer, or view the properties of the printer
  http://support.Microsoft.com/kb/307053
  Cannot use network printer if your password is not saved
  http://support.Microsoft.com/kb/312055