Libretto W100: Blio - wrong format & text software is not clear

Similar Questions

• Libretto W100 - 10 d - 3 G Module does not work after the installation of the system

  Hello

  I just reinstalled the software on my Libretto W100 - 10 d, from the internal HARD disk recovery partition recovery procedure.

  After the intervention, I have a clean booklet; all works well, except my 3 G Module is not recognized: the SW of Wireless Manager is not installed, and the 3G module does not appear in Device Manager more!

  It seems that the 3G module is not installed! of course before the recovery procedure, it worked like a charm!

  I suspect something has disabled the 3G module (usually something similar happens in the BIOS...)

  Can someone help me so that the 3G module working in return?

  Of many tanks and best regards

  Hello

  Have you checked the settings in the BIOS?
  To be honest I'm not quite sure if BIOS contains separate power switch or option Wlan 3G but you must absolutely check it m.

  To access the BIOS press ESC and F1
  Where would the BIOS contains 3 G or Wlan option, make sure that this option is enabled.

  Then visit the Toshiba UE driver page and download and install the Ericsson 3 G driver
  This is the driver for the 3G module.

• Libretto W100 - 10 d - What software is required to use the GPS

  Hello

  I have questions about this camera and exactly, I would like to know if it is possible install the libretto W100 - 10 d special SW using the potential installed on board.
  This model has a characteristic maps Erickson F3607 model to use this device as the 3G network and also has GPS but I don't know how is SW right to use the card as Garmin, Tom Tom or other.

  Thank you very much

  Hey Buddy,

  To be honest I never heard that it of possible to use a GPS software such as Garmin or TomTom on the Libretto W100. I Don t but Google shows no results

  I think an official response, which you get from an authorized service provider. You should contact them. Write an email or give them a call, I think that they can give you an appropriate response.

  If you find something, please post it here. It would be interesting. :)

• Libretto W100 Windows 10 - all features via 3rd party (instruction) applications

  Recently I was hunting for a UMPC to buy and who to is passed through a W100 on EBAY, and after a brief google I bought it immediately!

  Its an amazing device, but Windows 7 really does fall. It's slow, unwieldy, and honestly not too usable.

  However, Windows 10 is worlds apart when it comes to touch usability! Combine with Toshiba idea of the full screen keyboard and a virtual trackpad and the W100 a laptop full blown surprisingly usable. Win10 runs miles better than Win7, and things like scroll, zoom and pan is via texturing (like the iPad) so its smooth as!

  https://www.YouTube.com/watch?v=CLWvmohEuz4

  Working
  10 home edition
  Two multi-touch screens
  Keyboard touchscreen (3rd party)
  Touch Screen Touchpad (3rd party)
  Shortcuts to physical key (via scripts)
  Toshiba Eco
  Toshiba memory cards
  Toshiba Reeltime
  Toshiba face recognition
  Toshiba sync utility
  Toshiba media controller
  Webcam + Application

  Does NOT work
  G - Sensor (displays can always manually turn)
  Haptic (technically it works, but only with the booklet software, which does not work)
  Booklet (unfortunately unstable or unreliable on Windows 10) software

  The process is relatively easy, just time-consuming! That said, I take no responsibility if you follow it and he won't!

  Windows 10 Upgrade
  Requirements:
  Libretto W100/W105 running the version of Windows 7 with all the software and drivers installed.
  Last update of the BIOS
  External keyboard / mouse
  Download this driver

  1. Update for SP1 and install the new updates available via Toshiba Service Manager
  2. With SP1 is installed, you will become eligible for the 10 free Windows Update. This allows to upgrade your operating system.
  3. Follow the steps in upgrade from Windows 10 (I tested and BACKSPACE work!)
  4. Install the above driver. Accept the warning about it being old and restart.
  5. Click Start, type "Control Panel" without the quotes and then open the control panel
  6. Open Tablet PC settings
  7. Click on Setup. Tap the screen to highlight and press ENTER. The second touch screen and press ENTER.
  8. Click Reset under internal Toshiba Panel 1024 x 600 1.
  9. Select the Panel 2. Toshiba internal 1024 x 600
  10. Click on Reset
  11. Select the Panel 1. Toshiba internal 1024 x 600
  12. Click on calibrate and complete.
  13. Select the Panel 2. Toshiba internal 1024 x 600
  14. Click on calibrate and complete.
  15. Close the Tablet PC settings window and return to the control panel
  16. Open programs and features
  17. Uninstall the software booklet (keyboard/touchpad. They do not work properly / at all in win10)
  18. Uninstall Toshiba Bulletin Board (accidents constantly)
  19. Uninstall Toshiba Bulletin Board customization (useless without above)
  20. Uninstall XT9 smart input (does not work with other keyboards)

  You should now have a functioning entirely Windows 10 with two sites of touch screens as expected. The keyboard touch windows appear when you need it, but its way too small to be practical. Enter comfort keyboard. It's like the idea of keyboard Toshiba come with on steroids!
  I would recommend you first get the installer how I, to ensure that it works with the operating system correctly, and then customize from there!
  * Due to message size restrictions, it will be instructions to multipost

  Keyboard touchscreen

  1. Download Keyboard Comfort and install it. I support fully for buying this (I did it) is the ultimate W100 keyboard! (Free trial version is available)
  2. On the greetings page, check all the options and click Next
  3. Select the type 'MiniUnispaced' and whatever style you like
  4. Check "show only labels and icons...» "and click Next
  5. Check only 'use the movements' and "Adjust the width" and click on finish
  6. Right click on the new icon of keyboard on the task bar and choose Options. Move the window to the TOP of the screen
  7. Under properties of the hand, make sure that everything is checked
  8. Under keyboard shortcuts set visibility to CTRL + ALT + CAPS
  9. Under hotkeys value next keyboard CTRL + ALT + TAB
  10. Click defined the list of keyboards. Click on uncheck all.
  11. Check 'MiniUnispaced' and 'StandardBigAlpha' then 'Standard' then 'TwoSides2' and click OK
  12. Under the Visual keyboard, make sure that everything is unchecked
  13. Click Advanced..., and then click on the new window
  14. Check only «check any application as a web...» «, «do not move the keyboard to the screen...» «and to «Prevent the mouse...» ' and click OK
  15. Press the button of keyboard on the taskbar. Make sure that the keyboard appears on the screen at the bottom. If not: open Notepad (or anything with a text cursor) on the bottom screen and press the keyboard icon again
  16. Hide the keyboard by pressing the icon again and go back to the options window
  17. Under Position check only "lock". This will ensure that the keyboard never appears on the screen to the bottom and never the top!
  18. Under Zoom to ensure "Fit width" and "Height" are checked with any unchecked
  19. Click Save
  20. Click on the keyboard icon to display the keyboard
  21. The theme of the transparencies of Opaque background value, then use the common transparency slider to make the keyboard at your convenience. Feel free to play with other settings here.

  The keyboard is now set up and has to much as the Toshiba did. The final step is to link to the keyboard key!
  To do this, you must create a VBS script to send the shortcuts that the program uses.

  1. Open Notepad, and then put this:
     Set WshShell = WScript.CreateObject ("WScript.Shell")
     WshShell.SendKeys "^ % {CAPSLOCK}.
  2. Save on C:\TOSHIBA\ (or anywhere you will not accidentally delete/remove go!)
  3. Type of change SaveAs 'All' and call it 'Show the Touch Keyboard.vbs'
  4. Keep it open and change it to look like this:
     Set WshShell = WScript.CreateObject ("WScript.Shell")
     WshShell.SendKeys "^ % {TAB}".
  5. Save slot in the same place, change the SaveAs type for 'All' and call it 'switch Touch Keyboard.vbs.
  6. Close Notepad
  7. Click on start and type 'button '. Open the program of Support of Toshiba Button.
  8. Select the button KB (single click) and select Browse. Select the "see the Keyboard.vbs button.
  9. Click Save. The program closes, so you will need to re - open.
  10. Select the button KB (Double click) and select Browse. Select "Switch Keyboard.vbs Touch.
  11. Click Save

  The button on the keyboard should work correctly now!

• Libretto W100 - keyboard won't go away when I press the button yet once

  Hello

  I have a Libretto W100 and I need to make the keyboard disappear by pressing the keys on the keyboard on the left.

  I formatted the booklet and installed all the drivers.

  After the format I run the application of Toshiba button support and registered the button KB (single click), to the path target C:\Program Files\Toshiba\Libretto\TOSSWKBA.exe

  The keyboard appears on the screen when I press the button, but it will not disappear when I press again.
  Maybe I need to put something in the option field.

  Thanks for your help.

  Hello

  I read in another thread that Kaspersky 2010 version was not compatible with the touch screen of booklet.
  The new 2011 version seems to be compatible.
  Maybe you need to use the latest version

  Check it!

• Libretto W100: touchscreen only is active

  Hy...

  Please help me,

  I have a toshiba libretto, but only one is tactile asset...
  It's my new toshiba libretto reinstall windows 7...

  Please help me...

  André

  Sorry mate but could you please provide more detail?

  If I understand your original post, you have installed the new Windows 7 system on this Libretto W100 camera. Right?

  Now the question: have you installed the software Toshiba essential?

  You will find on the page of the driver Toshiba UE drivers and tools for the Libretto W100.
  The + v + 1.0.22.00 software booklet is an essential element and its strongly recommended to install this part!

• Battery use very high libretto W100

  Hello

  I've lived in the last weeks that the beautiful new Libretto W100 is very hungry. Of course, it will use some, because he has a lot of power.

  For example: take notes during a meeting, 1.5 pages (A4 format, font 12), about. 50% of the time the screen, running course in Eco mode, killing 74% of the content of the battery.

  Apparently they didn't really the size down from Windows 7 for better integrated in the mobile world. It cannot have been the intention of the designers to have to carry this big power supply all the time.

  Someone at - it similar numbers (or other)?

  Kind regards
  Wim.

  You are right. Libretto W100 has a lot of power.
  What is battery life on your book?

• Libretto W100 - can't make a key USB recovery

  The Libretto W100 won't a recovery USB. No mater how different USB I try. Recovery Media Creator gives this: error code 040EAE-05-00000000 and said that create media recovery failed.

  All the USB of new cases more than 5 GB, including a Toshiba 16 GB USB. I can't do a repair with Windows 7 disk because the W100 doesn't have a DVD player.

  Please can someone help?

  Hey,.

  Have you ever tried to format the stick of recovery first?

  I also USB stick recovery created on my Satellite T230 also doesn't have an optical drive and I used a 8 GB USB stick Spaceloop and it worked correctly. Before that I did, I formatted the stick (not quick format of normal format) with the default settings.

  In addition, it would be interesting to know if USB devices work properly under Windows or you have problems with USB devices too?

• "Attachment ID has wrong format" when you reply to emails in hotmail

  "Attachment ID has wrong format" keeps appearing on I answer all emails. Then, he does not send once I typed the answer and lost my response to the first attempt. At the moment I am each time to avoid losing the message and then paste the return message in the copy my answer and sending and then usually works after two or three attempts, it is far from ideal on a daily basis. I have no automatic signatures or attachments. I'm working on an iMac and this problem occurred only since the Lion for Mac software upgrade.

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Look at a PDF output reports a wrong format

  Background:

  EBS11.5.10.2

  level migration from solaris to linux apps - requires new tech battery installation.

  Problem:

  PDF reports generated from a competing application do not have the correct format.  That is to say the newspaper is missing, boxes/column outlines are not print - only generic text output

  The selection of the printer is noprint

  On the solaris system source uses the noprint printer driver of hpl with arguments acroprint, which in turn call acroread - I think it's a method they use to convert pdf to postscript-oriented (I'm new to this system have therefore no history with her)

  I'm not sure what to do to get the correct visualization for PDF files with the new linux installation.   I tried different drivers for noprint, nothing has no effect.  I tried to reproduce the acroprint set-up... same result.  No matter what I change behind the scenes, the report view is exactly the same.  All the text and all the missing formatting.

  The report itself is configured to use the PDF_PORTRAIT style.  I had to create this style in the new system, it's apparently a style custom - it is the only component scripts acroprint/acroread.  I tried to imitate the configuration on Linux, but the old man has Acrobat 5.  Acrobat is currently not acorprint script - it was can be personalized? Not sure again.

  Bottom line, how can I get PDF to display as properly formatted?  I'm not printing, only look at one... so do not know if I need to set up printing from blocks just to see?

  I appreciate any help you can give. I have another similar thread... but I think I took it the wrong way, so I'll close this one.

  Thank you

  Lori

  The problem has been resolved by a copy of the report of the source - this resolved that the rep-1800 and formatting has been corrected.  Something must have happened to the file when the archive original was created to move the system.  Thanks for all your help!

• Replace the string with the formatted text

  Hello all - I'm back to my beloved project...

  I want to replace a string by a TextSelction (formatted text) and began with the famous feature of Jang FindAndReplaceString.
  Since my replacement comes from another document (sourceDoc), I edited to targetDoc activeDoc and introduced a second document (sourceDoc).
  The replacePara actually comes from a stone where he had been placed to avoid switch backwards between the documents in a book (where to find and replace) and source documents. In another function, I learned that information on the table requires the sourceDoc must remain open.

  • Of course, everything works fine until I want to insert the replacelement:
    erase line 26 is the string
  • Given that I do not insert a string, I skip lines 28 and 29 and try try line 30
  • On line 30 DocumentSource is Document object and replacePare object TextSelection. However, sourceDoc.replacePara is not set and
  • (as a result?) line 31 past the current contents of the Clipboard.

  Of course, there is a fog around me... and I need some sunshine.

  function FindAndReplacePara (targetDoc, findString, sourceDoc, replacePara, loopMax) {
    var tr = new TextRange();
    var restoreTR, frame = 0, loopCounter = 0, replacementCounter = 0;
    var findParams = new PropVals();
    var firstPgf = targetDoc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;
    
    tr.beg.obj = tr.end.obj = firstPgf;             //  set up the starting text range as the very beginning
    tr.beg.offset = tr.end.offset = 0;              // of the flow. We'll move straight from beginning to end.
    trSaved = tr                                    // to come back after work
  
    findParams = AllocatePropVals(2);
    
    findParams[0].propIdent.num = Constants.FS_FindText;
    findParams[0].propVal.valType = Constants.FT_String;
    findParams[0].propVal.sval = findString;
    
    findParams[1].propIdent.num = Constants.FS_FindCustomizationFlags;
    findParams[1].propVal.valType = Constants.FT_Integer;
    findParams[1].propVal.ival = Constants.FF_FIND_CONSIDER_CASE;
  
    FA_errno = Constants.FE_Success;                // errno global, to be used to track the progress of the find and replace
    tr = targetDoc.Find(tr.beg, findParams);        // and do an initial find to get started.
    
    while(FA_errno === Constants.FE_Success && loopCounter++ < 2*loopMax) { //find and replace loop as long as we keep finding
      targetDoc.TextSelection = tr;                 // set up the text range to clear the original text
      targetDoc.Clear(0);                           // clear it
      
  //    targetDoc.AddText(tr.beg, replacePara);       // insert the new text at the original beginning of the text range
  //    tr.beg.offset += replacePara.length;          //  lets jimmy the text range in memory to place it directly after
      targetDoc.TextSelection = sourceDoc.replacePara;        // paste the whole replacement paragraph
      targetDoc.Paste (0);                          // <-- Current contents of clipboard is pasted !!!!
      if(FA_errno === Constants.FE_Success) {       // increment our return counter
        replacementCounter++;
      }
      FA_errno = Constants.FE_Success;              // ...  find the next instance. We'll reset FA_errno again just in case
      tr = targetDoc.Find(tr.beg, findParams);      // something screwy happened while we were replacing text.
    }
    targetDoc.ScrollToText(trSaved);                // we're done. Restore the document to it's original area of display
    return replacementCounter;
  } // --- end FindAndReplacePara
  

  Hi Klaus,

  Thanks for the explanation. I remember something like that GetTabRange of the way back. You have been quite patient and persistent with this project, indeed.

  So, as we are dealing with ranges of text here, I think that the only simple approach is to perform a copy and paste. There is no way to save a 'formatted' in a variable. The only super precise way would be to get a data structure of each text range TextItems in the sourceDoc, then meticulously recreate every element of the targetDoc. It would be very complicated, I think, so copy and paste seems the most logical. I wonder, though, if Miss me something, because I think that maybe you would have tried already so yes (?)

  In any case, I would do something like that, from line 30 of your original code sample (code untested here):

  App. ActiveDoc = sourceDoc;

  sourceDoc.TextSelection = replacePara;

  sourceDoc.Copy (0);

  App. ActiveDoc = targetDoc;

  targetDoc.Paste (0);

  ... etc.

  Does make sense, or am I barking the wrong tree, as they say?

  Russ

• Thunderbird email send option, format text, areas of HTML, "NAME DOMAIM HTML", adds domain name, domain HTML HTML: "what is it?

  "Thunderbird email send options, format text, areas of HTML, HTML DOMAIM NAME, domain name, domain HTML HTML adds:" what is it? Should I come in here as a domain sending HTML name? I have no idea.

  I can't send email. It seems that I need to configure the options of sending by sending a message. Yes? Help, please!

  Thank you. Ken [[email protected]]

  I doubt that this has nothing to do with your problem sending.

  Used as a plain text email. Some users prefer the plain text and use nothing else.

  Most users expect to be able to use the fonts, the colors, the font styles (bold, italic, underlined) and to be able to insert images and other graphic elements. To do this, you must use the HTML.

  To avoid annoying the first group, you can add to your address book and set their preference for plain text, on a whim of a base.

  If, say, in your workplace, it is planned to use signatures fantasies with pictures, or messages are required to comply with the internal rules regarding fonts or layout, then all related work email will need to use HTML. So you could add to your field of work (the part of the e-mail to the right of the symbol @) to the area of the HTML fields in the dialogue you have shown above. And you would probably add domains customers and suppliers too, since all your messages that will also be required to use your formal rules.

• Will there be a Libretto W100 with Haswell of Intel CPU?

  I'm in love with my Libretto w100.
  I upgraded to 256 GB.

  Now, it takes an upgrade to Haswell.

  This would solve 2 main criticisms:

  -battery life
  -noise because of heating.

  A booklet with Haswell would be the best computer in the world.

  You are just gerdich
  The Libretto W100 was truly a great unit it s a little bit older, but so far the two screens and virtual touch keyboard are futuristic piece of hardware.

  However, given that the serial number of the unit is already suspended, I think n new t processors will be built in the W100.

• Windows 8 on a Libretto W100 - 10 d

  Hi everyone, I would like to than you think to install 8 window on a Libretto W100 10 d.

  This device is not in the list of compatibility of Toshiba but... even if I tried Windows 8 on another pc and I didn't really like it (he's trying to copy the tablets in the worst way, I've never seen).

  Really, I can't think it cannot work on a booklet! What do you think?
  Thank you

  Check this page system requirements Windows 8:
  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  If the laptop meets this condition, you would be able to install Win 8.

• Micro SDXC 64 GB compatibility with Libretto W100?

  Hi, is a micro sdxc 64 GB compatible with Libretto W100?
  Rgds.

  Post edited by: massimod1d1

  The SD card slot supports them micro SD card: 2 GB and micro SDHC up to 16 GB card