Cannot set the focus when reset the data using data sets

Similar Questions

• ORA-01124: cannot retrieve the data file 1 - file is in use or recovery

  I'm trying to recover the database in waiting, but it gives the error below.
  
  ORA-00283: cool cancelled due to errors
  ORA-01124: cannot retrieve the data file 1 - file is in use or recovery, the recovery is already said
  ORA-01110: data file 1: ' I:\ORACLE\QAS\SAPDATA1\SYSTEM_1\SYSTEM. DATA1'
  
  When I checked in the alert log recovery is not started. and later I hae given ' alter database recover Cancel "and the command to meet with the threshold.
  
  "media recovery has not started.
  
  It seems that the recovery was stuck between the two.
  Please advise me how to kill the recovery session that is stuck. because I don't want to bounce the database pending.
  
  Thanks in advance.

  Dataguard and MRP, you run a script before.

  In a standby scripted, a session to RETRIEVE the DATABASE would an UNTIL clause (SEQUENCE up to THAT most likely). At the end of the recovery at this point (SEQUENCE #), he left and stop at the database.

  In addition, the script is such that when a RECOVERY session is active, another session is not authorized to start. It can loop in pending state or go out and do it again the next scheduled interval.

  Apparently your startup script is not strong enough to prevent another session of RECOVERY to start even though the first is active (or it doesn't have a good up to THAT clause and stop, exit, closing stocks)

  What you have is a custom implementation of a database of pending. Without all the details of the script, the 'blocking' between sessions (to avoid a second RECOVER start when one is already running) etc... We can't really do much to help you.
  Your scripts must be standing with status information. It should be possible for you to discover the 'other' sqlplus session which emanates a DATABASE to RECOVER, but not yet out (p. ex... How about a simple "ps - ef |") grep sql' and ' ps - ef | combination of grep ora"?)

  Hemant K Collette

  Published by: Hemant K Collette on May 29, 2013 17:47

• Cannot save the data

  I get the message "Cannot save the data" every time I try to open a single file CPTX. other files work fine. When I open the file, it gives me that message box, I click ok and another box says "a fatal error has occurred and the application is being completed. "and Captivate closes.

  I cleared the cache. I also tried to find and rename the Preferences folder, but I don't see any preferences folder or file in the \AppData\Local\Adobe\Captivate 5.5\ folder. Any ideas on what I need to do to fix this?

  The preferences folder is the folder "Captivate 5.5' in your profile (users\\AppData\Local\Adobe directory.

  Lilybiri

• VDP: Cannot access the data store

  Hello!

  I have a problem.

  Every day I see error for one of my servers in "reports":

  2016-07 - 05T 06: 00:47.971 + error 06:00-[7F2F3FA5E700] [Originator@6876 = transport sub]

  Cannot use hotadd mode to access the FileSrv1/FileSrv1_1.vmdk [Cisco2-datastore]: can't get using this method.

  (Mounting VM using vm-3198 transport hotadd failed: cannot access the data store for one of the drives of the Machine virtual FileSrv1..)

  At the same time, I havn't this error for the other servers.

  "FileSrv1" has not has installed "VMWare tools". After the instalation "VMWare tools" on this server, the problem is resolved.

• ERROR: Cannot open the data source for the user

  Hello, I followed the instructions in the URL below
  
  http://gavinsoorma.com/2010/02/GoldenGate-installation-Oracle-11g-on-Red-Hat-Linux/
  
  and I get the ERROR: cannot open the data source for the user
  
  I run the sql for the role but nothing
  
  any ideas please.
  
  Sun solaris operating system
  database version 9.2.0.7

  Previous question that you were:
  Where did you get the GoldenGate for Oracle 9i software?

• Oracle of the MAF error ' cannot read the DataControl uses on loadDataControl for the id:

  Need help!

  I created a simple SOAP web service for a remote database that works very well in 12 c WebLogic Server and also in the Jdeveloper HTTP Analyzer. When I use the same web service in the attached code, I get the following error (I've included output System.out.println in Ref. to the flow of the code) I use Jdeveloper 12 c MAF 2.0.0.0.41 on Mac OSx 10.9.

  Chk #0

  Processing line # 1

  Chk #1

  Chk #2

  [SEVERE - oracle.adfmf.framework - AmxBindingContext - loadDataControlById] Cannot read the DataControl uses on loadDataControl for the id: WLFNewActWS. [SEVERE - oracle.adfmf.framework - SynchronizationDC - syncDataFromOfflineToOnline] [Ljava.lang.StackTraceElement;@467c53d3

  @

  


  Sorry about that, I think I'm wrong you.

  OK, I created an example to test what goes wrong.

  1. server side, create a project named Employee_ws

  a. Department_ws.java

  public interface {Department_ws}

  public boolean addDepartment (a Department);

  }

  b. Department.java

  public class {Department

  public Department() {}

  Super();

  }

  int departmentId.

  String departmentName;

  locationId int;

  managerId int;

  {} public void setDepartmentId (int departmentId)

  this.departmentId = departmentId;

  }

  public int getDepartmentId() {}

  return departmentId.

  }

  {} public void setDepartmentName (String departmentName)

  this.departmentName = departmentName;

  }

  public String getDepartmentName() {}

  return departmentName;

  }

  {} public void setLocationId (int locationId)

  this.locationId = locationId;

  }

  public int getLocationId() {}

  return locationId.

  }

  {} public void setManagerId (managerId int)

  this.managerId = managerId;

  }

  public int getManagerId() {}

  return managerId;

  }

  }

  c. Department_impl.java

  @WebService

  / public class Department_impl implements Department_ws {}

  public Department_impl() {}

  Super();

  }

  @Override

  @WebMethod

  {} public boolean addDepartment (@WebParam (name = "arg0") a Department)

  If (Department! = null) {}

  int departmentId = department.getDepartmentId ();

  String departmentName = department.getDepartmentName ();

  int locationId = department.getLocationId ();

  managerId int = department.getManagerId ();

  Connection Conn;

  try {}

  Conn = ConnectionFactory.getConnection ();

  conn.setAutoCommit (true);

  Statement šment = conn.createStatement ();

  String inset_sql =

  "INSERT INTO dept (department_name, location_id, department_id, manager_id) VALUES ('+ '.

  departmentId + "," "" + departmentName + "'," + locationId + "," + managerId + ")";

  šment. Execute (inset_sql);

  Returns true;

  } catch (Exception e) {}

  System.out.println (e);

  }

  }

  Returns false;

  }

  }

  d. ConnectionFactory.java

  import java.sql.Connection;

  to import java.sql.DriverManager;

  import java.sql.SQLException;

  Connect to the database

  public class {ConnectionFactory

  public ConnectionFactory() {}

  Super();

  }

  protected static connection conn = null;

  public static connection getConnection() bird Exception {}

  If (conn == null) {}

  try {}

  String driver = "oracle.jdbc.driver.OracleDriver";

  String url = "jdbc:oracle:thin:@localhost:1521:orcl";

  User String = "employee";

  String password = "employee";

  Class.forName (driver);

  Conn = DriverManager.getConnection (url, user, password);

  } catch (SQLException e) {}

  System.Err.println (e.getMessage ());

  }

  }

  return conn;

  }

  public static {} Sub closeConnection()

  try {}

  If (conn! = null) {}

  Conn.Close ();

  Conn = null;

  }

  } catch (Exception ex) {}

  throw new RuntimeException (ex);

  }

  }

  }

  You can run Department_impl.java to start the Web service. i.e. http://127.0.0.1:7001 / Employee_ws-Client-context-root/Department_implPort? WSDL

  Server side sql:

  CREATE USER employee IDENTIFIED BY employee DEFAULT TABLESPACE users

  Temp TEMPORARY TABLESPACE

  Users WE QUOTA UNLIMITED;

  GRANT create employee to logon.

  GRANT alter used to logon.

  GRANT create any employee at table;

  GRANT create trigger employee TO;

  GRANT create any employee to view;

  GRANT create sequence employee TO;

  GRANT create synonym employee TO;

  GRANT create type employee TO;

  GRANT create employee to procedure;

  CREATE TABLE (DEPT

  DEPARTMENT_ID NUMBER (7, 0) NOT NULL,

  DEPARTMENT_NAME VARCHAR2 (50).

  NUMBER OF LOCATION_ID (7, 0),

  MANAGER_ID NUMBER (7.0)

  );

  2 create a mobile application of CRG named Dept

  

  a. Department.java (even for the server)

  b. SynchronizationDC.java

  import java.util.ArrayList;

  import java.util.List;

  Import oracle.adfmf.framework.api.AdfmfJavaUtilities;

  Import oracle.adfmf.framework.exception.AdfInvocationException;

  public class SynchronizationDC {}

  public SynchronizationDC() {}

  Super();

  }

  public void syncDataFromOfflineToOnline() {}

  It's just for testing, so I build Department manually instead of mobile db data, please replace in your business logic

  A Department = new Department();

  department.setDepartmentId (1);

  department.setDepartmentName("1");

  department.setLocationId (1);

  department.setManagerId (1);

  NamesList list = new ArrayList (1);

  List ParamsList = new ArrayList (1);

  List TypesList = new ArrayList (1);

  namesList.add ("arg0");

  paramsList.add (department);

  typesList.add (Department.class);

  try {}

  AdfmfJavaUtilities.invokeDataControlMethod ("Dept_WS", null, "addDepartment", namesList, paramsList,

  typesList);

  } catch (AdfInvocationException e) {}

  System.out.println (e);

  }

  }

  }

  c. new an AMX pag called Dept.amx

  "http://www.w3.org/2001/XMLSchema-instance" xmlns:amx ="http://xmlns.oracle.com/adf/mf/amx"

  xmlns:dvtm ="http://xmlns.oracle.com/adf/mf/amx/dvt" >. "

  Text = "syncDataFromOfflineToOnline."

  Disabled = "#{!}" Bindings.syncDataFromOfflineToOnline.Enabled}"id ="cb3"/ >

  d. deploy on Android Simulator

  

  Click the button and a new record have been db insert through the webservice, search the remote db recording

  

  If above does not solve your problem, please let me know, thanks.

  Byron

• You cannot delete the pattern used to the absence of an employee

  We are on 11.5.10, there is one issued due to the Absence. Suggest, we created type absence as "Time off" and attached reason which is mentioned below. After a while, we decided to remove the specific reason so that this employee cannot select this reason while submitting to authorization through self-service. Although we have disabled that always shows the reason for the "ABSENCE_REASON" research but employee self-service creates leave.
  
  "However, when I try to remove holiday because of the type of absence as mentioned above, then system will trigger the message" error MESSAGE: "you cannot delete the pattern used to the absence of an employee.
  
  Reason
  1 accident
  Appointment 2.doctor
  3. others
  
  How can we remove the 2nd reason (doctor appointment) to the list even if it has already been used in absence transactions.
  
  Thank you.

  Have you tried to value in the research of reason for the absence of end date?

  Also clear the Cache before testing...

• Used QUICK to collect files from the XP machine. Now cannot locate the data when you use Easy Transfer on Win 7 machine to restore settings

  I had XP SP3 on my computer and used the files and Settings Transfer Wizard to collect the data.  Recorded on another partition, formatted and installed Win 7 Pro.  Now, when you use Easy Transfer to restore data it tells me that it cannot find all the data.

  Any ideas?  Thank you!

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• My restoration of systems said that it cannot restore the dates, I've tried. What could be the problem?

  I played Solitaire Easter when my XP screen turned blue with the notice of a serious error had occurred.  One proposed remedy has been remove recently installed software and that was AVG Linkscanner and use the systems I tried using two different dates, which brought the response that systems of restoration cannot restore to each date.  What would prevent restore work systems?

  Hi MissLizz,

  Thanks for posting the query on Microsoft Community.

  It would be great if you can answer the following questions:

  1. What is the accurate and complete error message when you received the blue screen of death?

  2. What is the full and exact error message when you try to do a system restore?

  I suggest to refer to the article and follow the steps in advanced troubleshooting to solve the problem with the system restore:

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  I hope this helps. Let us know if you need more assistance.

• cannot change the date and time in the system restore

  How can I change the date and time in the system restore? When I try to create a new restore point, I can't change the date and time, the system automatically date and time in.

  System Restore will always set the date and time of any restore point created at the effective date and time of the machine.

  If you want to restore your computer to a date and an hour earlier, you must select restore from a restore point that was created at the earlier time.  This article explains how.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  My apologies if I misunderstood your question.  Why should change you the date and time when a restore point was created?  The only possibility of achieving a fictitious date and time will result in a change as actual date and time Windows or in the Bios, either option with unforeseen consequences.

• Cannot create the data VMFS on SAN store

  Recently, I wiped two Dell 2950 running 3.0 with no problems. I installed the 3.5 update 4 and since I can not create a VMFS data store in the GUI. I get an error that says "error during the configuration of the host: cannot open the volume: / vmfs/volumes/xxxxx".

  When I connect the console to the root, I see that the volume has been created, and I can even write. I also noticed that the data link store does not work as well.

  Storage EMC CX3 is CX4.

  I tried this on two servers various and two tables of sotrage.

  Ah yes... CLARiiON storage system must use MRU failover.

  Happy that you guessed it sort

• Satellite P100 - cannot delete the data from CD - RW disks

  I have a laptop Toshiba Satellite P100.

  According to the user manual it says:
  You cannot delete partially all the data written to a CD - RW

  I thought the idea of using a CD - RW so you could delete everything that you wanted to and use this part of the disc again and again.

  Can someone explain?

  I didn t find this info in the user manual and if you burned a few data on the CD - RW disks, then it should be possible to format this CD - RW by using a tool like Nero Burning ROM third 3rd for example.

  I've done several times using Nero and still managed

• Cannot access the data on Western Digital My Book Essential.

  Original title: Western Digital My Book Essential

  Cannot access data stored on My Book Essential 3 TB.  Desktop computer no longer recognizes.  Laptop sees it, but I can't access the data.  Cord replacement binding have at the least visible on laptop & office 'discover' for a long period of time.  An hour pending with Western Digital with no live person on the line.  Am now thinking the drive can't be fixed and Western Digital is not actually support.

  If I buy a replacement, how to make the data from the old to the new?  All suggestions will be useful.

  Moved from IE

  If you do not see the data, you can not transfer it. Keep trying with Western Digital.

• Cannot change the date or time.

  I go to control panel or click on the time in the lower right corner, and then click change date/time.  I then click on the month (September) and scroll down to July and click on apply.  It remains July for a split second, then changes again in September.  It's the same for the day, month, and time.  Help!

  Hello

  · Were there any changes made on the computer before the show?

  · What is the edition of windows that is installed on the computer?

  · Who is the service pack installed?

  1. you can follow the steps from the link below: you can not set the date, time, or time zone on your computer: http://support.microsoft.com/kb/300022

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Is there a way to get a picture received in e-mail the date was taken originally? I cannot get the date it was sent to show.

  I have two photos that were sent to me & I need to determine the date, what they were originally taken.  One or both may have come out of a social networking site.  When I click on the info button, I get only the date, that the pictures were sent by e-mail to display.

  If you right on the file and choose... Properties Summary / tab.
  Test tip... you can see the date if it is available.