Cannot sort bookmarks; they are divided into two groups

Similar Questions

• When I sort the bookmarks in "organize bookmarks" they are not sorted under the bookmarks dropdown. Latest additions are not integrated in the genre

  When I sort the bookmarks in "Organize bookmarks" they are not sorted in the menu deroulant on a standard page. Recently added favorites are not included in the sort.

  See this:
  https://support.Mozilla.com/en-us/KB/sorting+bookmarks#Sorting_by_name

• Normally, when you open the page palette in InDesign, it is divided into two. The upper part is where is the master page (and a page named none), while the lower part is where are the actual pages of documents. Unfortunately, when I opened my palette of p

  Normally, when you open the page palette in InDesign, it is divided into two. The upper part is where is the master page (and a page named none), while the lower part is where are the actual pages of documents. Unfortunately when I opened my palette (InDesign CS 6 on a Mac), there is no upper and lower part of the page-only the lower part is displayed. When I put my cursor on my pages, it tells me that I "Applied A-master".

  Why not my top shows (A-master and none)? The pages that I don't "Act" like master pages - for example, I can't get past page numbering.

  
  

  Any help is appreciated. Thank you!

  It looks like the upper part may be in a State reduced - the line was pulled up.

  Just of the cursor on the line that separates the upper and lower sections, and drag it to the bottom.

• My images from various sources are fine in the library, but when I do develop they are converted into negative.

  My images from various sources are fine in the library, but when I do develop they are converted into negative.

  Go to Preferences, click the performance tab, and then clear the check box

• Red video and no sound at the end of the clip 3 hours when they are imported into first

  Hi all

  I currently have a problem with first Pro CC when a clip of 3 hours that I recorded (720 p/24 fps) using XSplit loses video and audio in the last 10 minutes when they are imported into first. The rest of the video is perfectly fine, but this section of it does not correctly (it goes forever, one minute or more per image) and will not export the missing without audio recall bias, and the video (export fails at the end). The clip is a created and coded by XSplit MP4 file and is able to normally play outside Premiere.When overview in the first, reading only shows a screen completely red. There is no effects applied to the element, or any change to the it.

  I tried to clear my cache preview and import the clip into a new project with exactly the same results in the same place in the clip.

  Thanks for any help!

  Hi, IPA,.

  You have a video file that has a variable rate, which does not work with Premiere Pro. You can transcode the file, and then it should work OK. Many people use the brake hand or similar.

  Thank you
  Kevin

• Help! Photoshop edited jpg color false when they are imported into Muse

  Okay, so I try to build a Web page of photography (among others) and I change most of my photos in photoshop. All the photos I edit in photoshop and save it in jpg format, look great when printed, uploaded on facebook etc, but when I import them into Adobe Muse for and put them on my page Web, the colors of the photos becomes desatures or distort slightly (so that they appear dull). When I edit images in lightroom and save them in jpg format and import them into Muse, they look fine, but colours edited in photoshop seem to spoil my pictures when they are imported into Muse.

  What I am doing wrong?

  Susan

  You are using some weird color management settings and do not convert to sRGB probably... Check your settings in PS itself and save for Web dialogue box and experiment around.

  Mylenium

• screen divided into two half with a separator to resize - apex 4.0

  Hello experts,
  
  How can I create a screen divided into two, with a divider in the middle that the user can use to resize the two halves? With the help of apex 4.0
  
  Thank you
  
  Salome

  Yes, take a look at available to JQuery UI plugin developed by Tobias Arnhold, he of really cool stuff.

  [Plugin JQuery UI for APEX 1.2 | http://www.apex-plugin.com/oracle-apex-plugins/dynamic-action-plugin/uilayout-part-1-initialize_77.html]

• iTunes divides into two album

  Anyone know why, when I imported an album into iTunes, it was imported in two albums, that of the 1-way and one of the 17 (18 tracks on the original album)

  If you see unexpected songs groups when you browse an album - https://support.apple.com/HT204538 - 'songs from the same album may not be grouped as expected when you view them in display Albums in iTunes."

  The following sections provide additional solutions.

  Steve MacGuire alias turingtest2 - iTunes and iPod tips and tricks - grouping beaches in Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (old post on Apple Discussions http://discussions.apple.com/message/9910895#9910895)

  Quick response: select all the tracks on the album, file > info (or right-click > news > Details) and give them all a single "album artist", or check the indicator of "compilation" (as in https://discussions.apple.com/message/17670085#17670085).

  If they are several CD sets, you will also need to enter the appropriate information in the fields of number of disk.  If they are not a set of multiple CDs that you must always make sure any vacuum or disc number fields are properly defined.

  Another explanation of hhgttg27 August 2015 - https://discussions.apple.com/message/27784417#27784417

  If they won't even really check this August 2008 post by turingtest2 group temporarily change labels - https://discussions.apple.com/message/7904806#7904806 or http://www.samsoft.org.uk/iTunes/merge.asp - add a letter at the end of the name of the artist, close the read information, then open it again and remove the letter. This works often but I had cases where securities combined when a letter has been added but divorced when he was kidnapped again.

  If they are mp3 files are trying to change the version of the ID3 tag, which can cause iTunes to re - write the tags and clarify inconsistencies.  I use iTunes 7.5 (Yes, from 2007) so I can't tell you where it is in later versions.

  I had a case of grouping stubborn reality.  The tracks will be re-group in a way that has no meaning when I changed metadata.  Without going into details, I deleted tracks iTunes completely, then add the files and they are all grouped together correctly.

• Satellite C855-1QC screen is divided into two parts after the mode 'sleep'

  Hi guys,.

  I have the following problem. When I put my C855 1QC Satellite in sleep mode (sometimes also after a reboot). The logo at the beginning, when the system back to the top is fine, but the home screen becomes divided vertically into two parts. Good content is there, but flashes on the display.

  I've found a workaround: I open a session, press Fn + F4 and click on dual screen. A normal screen appears, but does not cover the full size of the actual display. Then I click Fn + F4 and return to the initial display again and all is well. It's really annoying, so any suggestion is welcome. Oh, BTW my OS is 64-bit Wk8.

  Second question relates to the brightness of the screen. I can't find a way how the brightness to adjust automatically according to the ambient light conditions.

  Third and last one relates to the Radeon VGA, config tool at the launch said, there is nothing to configure.

  Thanks for your suggestions,

  Martin

  Hi Martin

  Described display problem is definitely not normal so I would know since when have you noticed it. I put t know what can be the reason for this, but I can't imagine there is a simple trick to fix this, so I recommend you to reinstall the OS using recovery media and test with the factory settings.
  It will be interesting to know if the same thing will happen again and again.
  In general all the drivers are included in the recovery image are tested and I can't imagine display driver may be responsible for this. Try please test with the pos and comments factory settings.
  > I can't find a way how the brightness to adjust automatically according to the ambient light conditions.
  As much as I know something like this is not automatically due to lack of light sensor. The display brightness must be changed manually.

• VCloud in virtual machines cannot communicate if they are in another ESX host

  Hi all

  Currently I do a simulation for VCD in my laboratory of the company. I just discovered a few question in this simulation. Hope anyone can advice on that. Thank you.

  Senario:

  1. create an external network with 400 VLANS in vsphere Distribution Switch in two ESX server.

  2. create a VCD organization.

  3 create a pool of network supported by network isolation VLAN 300

  4 create an external organization routed network connection-NAT and select Network (VLAN 400) external and network pool (VCDNI vlan 300)

  5. create two virtual machines and assign the same network of the external organization that was created in step 4.

  6. If two virtual machines on the same host, they can communication or ping to each other.

  7. If two virtual machines in different hosts, they cannot communicate.

  Why step 6 and step 7 will happen? What I have set up wrong? Please advice on this.

  Much appreciated for your help.

  Thank you.

  Concerning

  Ho

  the physical switch must be configured for vlan 400 and 300,

  vcni network tries to encapsulate the traffic on the 300 VLAN, if it is not configured on the physical switch virtual machines will be able to talk if they are on the same host.

  correct its help is not a network back pvlan Isolation needs its own vlan you set to 300, which she in turn can then run 1000 + mac in the mac encapsulated networks in vlan 300,

  Configure the ports on the switch to accept any vlan 300 institutions and it will be sweet

• Canon 5 d Mark ii Images with the value of the white balance fixed. When they are imported into Lightroom, the value is different.

  If I take a shot with the fixed value of 5200K WB (5 d Mark ii) and import into LR 2015.2.1, happens to 4850K. No presets or applied adjustments.

  No idea why? How can I solve this problem?

  Rich

  All raw converters use four multipliers of white balance RGGB tinted and embedded in the raw file EXIF data to set the white balance and 'calculate' the temperature values displayed inside the module development LR WB.

  Scroll down to the "White Balance" section of the DCRAW tutorial PDF here: GUILLERMO LUIJK > TUTORIALS > DCRAW TUTORIAL it's all so raw converters all the rest of the white raw file and 'calculate' the temperature and tint values.

  Here is a Canon 5 d MKII CR2 file with the White Balance adjustment 'in the know' behind closed doors:

  (Data EXIF Maker Notes)

  

  The setting "As Shot" WB in LR shows a Temp of 4800 reading, which should produce a slight visual difference that the planned in-camera closed 5134 parameter, correct?

  

  However, with the LR settings file, "As Shot" above the white balance CR2 is the JPEG file in camera perfectly on my Canon 5 d MKII (raw + JPEG file format). It's just that Temp readings do not, because they are "calculated" four RGGB multipliers. Each raw (LR, opening, C1) converter will probably show the values of temperature and tint different, since they are derived by using "reverse engineering" of the manufacturer of exclusive camera raw data structure and camera sensor response file.

  Keep in mind that the spectral response of the camera is affected by changes in batch. A Canon 5 d MKII body can produce slightly different WB as one another using the same exact settings. Rather than depend on private clos or LR presets use a good white balance card or the ColorChecker Passport to 'calibrate' LR white balance settings standard shooting conditions (daylight, cloudy, Flash, etc.). For critical projects draw card of the white balance at least once for each unique lighting condition. You can then determine the correct inside the LR setting and settings of synchronization of the World Bank through all the images taken with this specific lighting.

• Why my video files are divided into segments?

  I'm new on Premiere Pro and previously used FCP 7. I shoot a Canon Vixia HFM400, which is the AVCHD file format is. MTS. In FCP 7, I used to be able to insert my SD card into my card reader, open FCP 7, then go to file > Log and transfer and a video file of an hour to be ingested without any problem.

  Now, using Adobe Premiere Pro, I don't have a "Log and transfer" option, so I import my files .mts file stream from my SD card on my hard drive and import them in PP. However, with video files any longer, I noticed the .mts files are being divided into segments of 16 minutes. I tried just to put them back to back, and while the audio seems transparent, I lose a few images on the video, which makes it a little nervous. How can I fix? What I need to copy the structure of the entire file from the SD card? The only reason why I have not done it is pictures on the card that I can't import for this specific project. However, I read on other forums that it can solve the problem. I can test it, but I wanted to just make sure before wasting my time...

  Yes, you will need to copy the overall structure of the file on your hard drive and then use the import media browser if you don't want your film to segments.

• VMware Workstation 6 image shows as invalid when they are imported into ESXi5

  Then, I got two pictures of a colleague who are displayed as images of Workstation 6. I have confirmed that they are working on wkstn 7 (I have workstation 7 and 8 workstation allotted to me), but when I download them via the browser to store data and then make a right click... Add to inventory... once the process is complete the virtual machine to show as no valid in vCenter. What Miss me?

  Thank you

  Jim Odom

  Welcome to the community,

  I guess you used the format of sparse virtual disk to the VM Workstation. It will not work with ESXi 5.0 and you will need to use the converter to "forward" the VM to the ESXi host.

  André

• Why video AVCHD still presents itself as "File of Format not supported" when they are imported into CS5?

  I've been editing AVCHD with CS5 for several months, but every time I import video AVCHD first always displays a message box titled "File import Failure", all lists of imported files, and then at the bottom of the window, it says ' Error Message: file format not supported ".  You click on the 'OK' button and change with the film without problem.

  I was wondering why this message still comes up if the film is supported in CS5.

  Just MTS files are probably very well; First is quite smart to seize what he needs in the other files, as long as the file structure is intact. An even easier way would be to use the media browser; Navigate to the folder containing the AVCHD folder structure, and the MB will flip mode display of AVCHD. It will give you a list of all the files contained in the folder of DATA flow, without having to actually dive into the file STREAM. Select some or all of the files and import them into your project.

  The message "File Format not supported" is due to all of the files you listed; some of them are used by first behind the scenes, but they are not the media themselves, so that they can not and do not need to import.

• I have blown my motherboard on an old computer and hooked up my old hard drive to the new computer and want to transfer my favorites on the new drive but cannot find where they are located on the old drive - any help?

  My motherboard went bad on my old computer, but the hard drive was OK. I bought a new computer and plugged my old hard drive to it via a usb adapter. I would like to import or copy my favorites from the old hard drive to my new, but I can't find where they are. I was unable to determine the search for articles on the web. Be advised that my old hard drive is basically nothing more than a place of storage for files at this point. My old operating system is windows XP, and my new system is Windows Home Premium.

  https://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

  Your old profile is located here in Win XP and W2K:
  
  drive: \Documents and Settings\username Windows login\Application Data\Mozilla\Firefox\Profiles\profile_name