Why video AVCHD still presents itself as "File of Format not supported" when they are imported into CS5?

Similar Questions

• Red video and no sound at the end of the clip 3 hours when they are imported into first

  Hi all

  I currently have a problem with first Pro CC when a clip of 3 hours that I recorded (720 p/24 fps) using XSplit loses video and audio in the last 10 minutes when they are imported into first. The rest of the video is perfectly fine, but this section of it does not correctly (it goes forever, one minute or more per image) and will not export the missing without audio recall bias, and the video (export fails at the end). The clip is a created and coded by XSplit MP4 file and is able to normally play outside Premiere.When overview in the first, reading only shows a screen completely red. There is no effects applied to the element, or any change to the it.

  I tried to clear my cache preview and import the clip into a new project with exactly the same results in the same place in the clip.

  Thanks for any help!

  Hi, IPA,.

  You have a video file that has a variable rate, which does not work with Premiere Pro. You can transcode the file, and then it should work OK. Many people use the brake hand or similar.

  Thank you
  Kevin

• Damaged files when they are imported into Aperture. An Adobe tool or function appears 'corrupt '!

  Hello

  I use to work with sweet Apple Aperture for my library photos. As know, or maybe Apple stopped support and update of the opening. Bad news.

  So, I decided to try Lightroom.

  A tool or function in Lightroom is dedicated to import masters from may Aperture library.

  BUT it does not work very well!

  Some masters of 2348 (JPEG files) are classified in a folder named "Notimported". And best, they are damaged! But the real opening files are OK, for on:

  I thought that master real Aperture were really damaged, but an analysis tool they are really OK?

  What can I do? That helps Adobe can give me to get in the Lightroom "Master Library" (in terms of files) these 2348 files?

  And I'm starting to believe that this specific feature Adobe Lightroom or the tool is "corrupted". And I need to work with these files, 2348. Not bad!

  So Adobe please help me!

  Best regards

  Pascal

  BAD NEWS: The files are also lost in the opening. No backup.

  Can I have the name of the files I tried what you suggested.

  2348 Lost.

  Not much to do except revorery data with a specialist. The tool I used to check they were Ok seems unreliable. Or I do not know how to use it.

  Thus,.

  It's nighttime in Paris.

  Best regards

  Pascal

• Video of C100 AVCHD Canon 60i stands as 29.97i when they are imported into first CC 2015

  When I import an AVCHD file shot at 60i with Canon C100 MK1, it will come in first CC 2015 as 29.97i . (exactly like the images shot using the parameter PF30p of Canon).  Everyone knows this?  Maybe this related to the strangeness of the Canon PF30p we all know files must be "modified" inside the first change in progressive?  Is there a similar work-around for 60i?

  60i is the wrong way to say 30i.  They mean the same thing, well that - 30 interlaced images per second.

• Video input appears tense, when they are imported into Premiere Pro CS6

  I'm on a level of beginner on Premiere Pro, so please be nice if this question is very basic. I'm doing a video that preserves the video resolution of entry exactly. My video entry was a MP4 movie with a resolution of 1440 x 1080. It is a recording of screen iPad using the X-Mirage software. When I opened normally in quicktime format, it seems not tense. However, when I imported the clip in first, the clip appeared tense. I checked the properties of the element, and it proved to have Pixel Aspect Ratio 1.3333, which means that the pixels are elongated. My output sequence was also strained because of this, although the output indicated that the resolution is the same: 1440 x 1080. I tried to comply with the "Clip Mismatch warning' and the result was still a stretched version. Help, please!

  

  

  I'm guessing that first interpreter clip homesick. He probably than her video hdv 1440 x 1080, which is equal to 1.33.

  Go to interpret images and set the format of the pixels to 1.0.

  See if that will fix it.

• Why do I only half of my IE favorites when they are imported into Firefox?

  I tried to import my favorites IE8 twice in Firefox. On these two occasions only on the first half of them appear in Firefox. There is as a limit of size on the Favorites, or some other problem here?

  Thanks cor - el, I did it and all my favorites of IE are now Firefox bookmarks. Excellent!

• Here's a strange. I have a HTML page with this time a wmv video. It works perfectly from a USB stick or SD card, but does not work when they are copied to the hard drive

  I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:

  LIFT, DRAG, THRUST and GRAVITY

  
  

  
  
  

  If I run it on a machine with Win 7 there is no problem.

  Richard Grosser

  Hi Richard c. Grosser,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.

  http://social.expression.Microsoft.com/forums/en-us/categories

• HTML5 player based Soundcloud, does not work when they are embedded on my site. Why?

  SoundCloud HTML5 based widged does not display on my Web site when they are incorporated. It used to work, now there is only an empty contained area. It works on Chrome and explore.

  Anyone have any idea why is - this? Really need help.

  THX

  You can post a link to a public page that doesn't require authentication (login) to access?

  Have you checked the server sends the file with the correct MIME type?

  • https://developer.Mozilla.org/en/Media_formats_supported_by_the_audio_and_video_elements
  • https://developer.Mozilla.org/en/Configuring_servers_for_Ogg_media
  • http://en.Wikipedia.org/wiki/Use_of_Ogg_formats_in_HTML5

  Apache:

  AddType audio/ogg oga ogg
  AddType video/ogg ogv
  AddType video/webm .webm
  

  A good place to ask for advice on web development is to the 'Web Standards Development/evangelism' MozillaZine forum.

  • http://forums.mozillazine.org/viewforum.php?f=25

  Aid to this forum are better informed on issues related to web development.
  
  You must register on MozillaZine forum site to post in this forum.

• Video files (any type) when they are imported, will import the video and audio.

  Premiere Pro (Mac) CC

  3.4 Ghz i7 Quad Core

  750 G SSD

  2 GB NVidia graphics card

  32 MB of Ram

  Any file video, regardless of the codec, import into Premiere pro as an audio file.  I did the things suggested in other forums, such as replacement .mov file extension, I used intermediate codecs, prores422, codec .mov (HDV1080p30) among many others.

  Also, I can't import a video sequence that seems to have an alpha that are associated with channel.  The graphics with alpha channel were made by Adobe AE and work well in Final Cut Pro 10.1

  I need help, FCPX 10.1 is a nightmare and I have a weekly television show that needs to be done as soon as POSSIBLE.  Until now, the switch to first Pro CC disappeared not smoothly.  Any help would be appreciated.

  Thank you for your response.  I could get my hands on Technical Support and we determined that my first Pro CC installation was corrupted.  It's a simple solution to uninstall and reinstall the program.  Now, everything works fine.  To answer your question, when I imported any type of video file (I tried several types of different different video files and codecs) it would be important in audio.  The icon is Audio only, when I put the sequence on the Timeline, I couldn't put anything on the timeline of the video, only Audio was present.

• Videos curtailed when they are imported

  I was importing images taken on a handycam (Panasonic HDC-HS20) that has been saved on the hard drive of my Mac, and once it is imported they are cut short. As far as I know, they are a Quicktime movie file type (although I'm no expert). They are relatively short excerpts (most of them only 6-30 seconds in duration) and the amount of missing time of each clip can vary. I am able to display them in their full length in iPhoto and Quicktime. I tried to import from within first Pro CC and by dragging and dropping them in Premiere Pro, the two senses seem to also cut short video. In addition, missing images are taken at random points, leaving the audio out of sync.

  Any help is appreciated!

  How did you get the images in your Mac?

  Open one of the files on your hard drive and open it in Quicktime. Once the file is open, go to the window menu > show Inspector. An inspector pane opens, either report what the inspector said, or take a screenshot and post that here, as in the following example:

  

  In addition, if you can see the full clip in iPhoto, select the item in iPhoto and export it. Try the ingestion of that clip in the first. Do you see now all content?

  MtD

• Windows Media Player only recognizes the song titles when they are imported from itunes, imported in the form of wav files.

  Hi, I imported/ripped music in form of wav files using WMP first and imported into itunes so that I can sync w / my ipod but itunes recognized only the first words of the music info (generally the number of song, title, ect). ITunes would allow me to change the info. So I decided to import my 7 000 more songs again using itunes, in the hope of finding the songs via watched folders to WMP. Well, that was the case, but he only identified the song number and the title. Now, I have a long list of other/unknown.

  I can get information in WMP via "Find album information", one song at a time, but that would take forever. I imported 318 songs to date. I use wav files to maintain the quality of the sound.  Can someone tell me an easier way?

  Hi MarkyB13,

  You might have items in your library in Windows Media Player that have missing or incorrect media information.

  You can check out the following link and check if it helps:

  Add or edit media information

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/album-info

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Date of original video file changes when they are imported

  When I import video files, change the date of the original source file gets to the date of my import.

  Premiere Pro CS4, never did. Why CS5.5 changes the date of the source file?

  Steve

  If you have the game preference to write XMP IDS to files on import, Premiere Pro will write an XMP ID in a source file when you import it. Advancing the date of the modification of the file.

• Audio disappears from the video file when they are imported, please help!

  Hello

  When I open a new project and create a sequence, usually I import a. File video TS that automatically gets a blue label. When I hang out in the sequence, the video will appear in a video slot machine and associated audio appears in an audio connector. However, lately, about completely random, when video files I import them, they come with a purple autiomatically label assigned to them, and when I drag them on the sequence, there are only videos or sound only. PPCS6, when I go into the properties of the video in the software, records that the. TS file has any audio associated - yet when I look at the file outside of the software, it is very good and has the audio.

  Can someone help me please? It's quite urgent and I would appreciate it.

  Thank you.

  Update: just installed the update, did not know it was there! It seems to have corrected, thanks for letting me know! I hope that it doesn't yet, but I'll be sure to come back if she does.

• Could someone explain/link me to a forum that explains why the CR2 files are pink when they are imported?

  I'm new to Cannon and when I shot raw, I didn't believe that I would have a question, get the images on my computer. However, when I imported using a converter, they come out of rose! I turned monochromatic and using a Mark iii if it makes a difference. I did not really find a clear answer. I'm sure it's something simple, I don't get but since I'm used to Nikon, I don't understand and can't seem to find anything to explain it. I really appreciate it!

  What software do you use to view your Raw file? If this isn't Canon DPP, it cannot make your Raw in B & W because the third-party software cannot read the camera settings. If the whole picture is pink, you may have a corrupt monitor profiles. Nikon or canon is not serious in this case.

• Video accelerates when they are imported, but the audio is normal at PE7

  I ripped a DVD on my computer. It's in a format default VOB from DVD Shrink. I don't know if I can change the format and I don't know if it would help. It is not be compressed in DVD Shrink, so I don't think that's the problem. I open the VOB file in PE7 and it's as if the video is on fast forward, but the audio is at a normal pace. If I try to open the file in PE3, the video is jittery and jumps autour, but the video is not faster than the audio.

  The pace in PE7 is 29.something, whatever it is to normally. I thought it was DVD Shrink causing the problems, but I tried both DVD Decrypter and got the same results. Any ideas on how to make video slow?

  Sorry in advance if someone has asked this already and I just failed to find. I just upgraded to PE7 and it has been giving me problems throughout the weekend. I'm a fool when it comes to technical stuff of video, so I can't have any idea what you are talking about if you try to tell me how to solve this problem.

  You can take a look at this THREAD, down near the bottom. ATR has given a recommendation for software work with the poster. VOB files and it worked fine.

  Regarding DVD-video software players, WMP has ability to delete some versions back. I heard it was just for the serious but DVD I do not use it, so I don't know. I heard there are plug-ins available, but have no experience. I use CyberLink PowerDVD and am very happy. Media Player Classic HomeCinema edition is also highly recommended, and it's free.

  Good luck

  Hunt