Cannot start a JVM 64-bit on a 32 bit JVM process

Similar Questions

• Cannot start Illustrator CS6 64 bit on Windows 7

  I installed upgrading Master CS6 yesterday and almost all applications do not work properly. However, when I try to open Illustrator CS6 64-bit, it returns this error message: "the application could not start correctly (0xc000007b). Click OK to close the application. "The 32-bit version works properly. Any suggestions or similar cases? Thank you.

  I had this problem until tonight and seeing this thread that something occurred to me, like something similar that happened to me once with some Steam games.

  The error means that the program refers, by mistake, a 32-bit instead of a 64-bit DLL. It's all to do with things get mucked up with the Microsoft Visual C libraries.

  Head to the programs and featuresand uninstall all entries in Microsoft Visual C++ Redistributable . Open your CS6 installation folder, then browse to the subfolder of payloads .

  Scroll down and you will find all records Microsoft VC Redist . Install all x 86 versions first, then all x 64 versions. Your problem should now be fixed.

• Cannot start Windows vista 64-bit is not after installing SP1

  When SP1 is installed, it will ask to "restart now" click on that and it not his "disconnect", then moves to step 1 of 3. " arrives at 97% and restarts. When it starts and happens to where windows should load up, it just goes to an error screen that says...

  "Unable to start Windows. A recent hardware or software change might be the problem. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  File: acpi.sys
  Status: 0xc0000098
  "Info: Windows failed to load because a required file is missing or corrupt.

  Now I can put in the disc of windows and repair and it will load and everything is good but not SP1 and if I try to install again, the same acpi.sys error again.

  I changed the power settings for monitar and readers do not turn off if the system is idle for long periods of time. I have reformat the HD does have 2 attacked together but spent the 1 hard drive and changed RAID.  This change has been to try to understand why my computer would hard lock. So far it isn't hard lock now. just can't update vista SP1 now. No update problem when he had 2 hard drives had attacked

  Any help would be great.  THX

  Hello

  Microsoft has released the analysis tool system update to resolve certain conditions that could cause the installation of updates and other software not only not for work. You don't have to manually run this tool. This tool is offered automatically through Windows Update on computers that have a condition that the tool could solve.

  System update readiness tool is available on the Windows Update Web site. To obtain this update, follow these steps:

  1. click on start-> click on Control Panel, and then click Security.

  2. under Windows Update, click check for updates.
  Important This update is available on Windows Update only to computers that have a condition that the tool could solve

  The following files are available for download from the Microsoft Download Center:

  Download the System Update Readiness Tool for Windows Vista (KB947821) package now.

  For more information, see article http://support.microsoft.com/kb/947821

  All the best!

  Diana D D

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Railroad Tycoon 2 on Windows 7 error - setup.exe cannot start or run due to incompatibility with 64-bit Windows versions

  I'm playing the game "Railroad Tycoon 2-Gold edition" on my laptop which is running Windows 7. Whenever I try to install it, he repeats to me - "the program or feature? \G:\_setup\setup.exe cannot start or run due to incompatibility with 64-bit Windows versions"... .and there is nothing I can't do to go around that at all.  Normally with my old games I can at least install, then just then change to be compatible and is not, but I can not here. Any help would be great I want to play this game, it's one of my favorites and I hate how I can't play everything simply because computers are better than them... If this is the case, then they should still be able to support games that are 10 + years older than them, you know? I can add more information if needed, thank you.

  You must contact the manufacturer to see if they have a patch for Windows 7. He would come by the manufacturer and not by Microsoft.

  Thank you

  Marilyn

• "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows

  A friend gave me your laptop to watch - there edition family vista (64 bit (I think) on it and when you try to run Explorer he says it does not find or access is denied and something about 16 bit / 64 bit (it has been a few days and I'm not memory clearly until what I try again tonight)

  "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows"

  If you try to run a dll / Panel or anything like that, you will get an error message saying that it cannot run some 16-bit process or access denied.

  I did a lot of research on Google and nothing someone he said worked - which "everyone" giving full access to the C:\WINDOWS\Registration, executes a command secedit, a sfc/scannow, do a system restore to the point of older, make a new user account, start up in safe mode...

  So now I'm pretty stuck. I'm SURE I've seen this problem before with reference to 16-bit etc error messages, but in home edition I do not have the MMC users & groups (had to make new user with password renew then that starts in another environment) or the Security tab of the properties of file/folder for permissions NTFS etc (had to use icacls).

  Can someone enlighten us justice on that shiney? : o I don't want to have to redo the entire Setup, I'm sure it is something fixable...

  OK, so for those who want to know the real difficulty? --He came from a guy on the forums of TekTips

  goombawaho (MIS)

  5-13 dec 08:05

  Before charging, tell him from a prompt CMD (Administrator). Go in the the C:/windows/system32 folder and type "Rename verclsid.exe verclsid.old. reset

  I guess that I didn't that I had seen the name "verclsid.exe" in some of these error messages trying to run things.  I looked and saw it was to check the files or something.
  Anyway I couldn't rename even in admin console so I started in a different environment and renamed the copy in system32 and syswow64.
  Now, I've started and bang things seem to be ok! I guess I should try and replace it with a known working version? That or just give back it.
  I doubt that everybody does all c:\windows control total should be too dangerous, right... just?  : P I don't have a way to put permissions by default anyway, so Hey.  Formatting beats!

  Now why everyone here didn't it?  I knew it would be simple!  : p

• Gettitng error message "service error: Windows cannot start the BITS service on Local computer" when you start BITS service

  When I try to start the Windows Services BITS service, I get the popup error message "service error: Windows cannot start the BITS service on Local computer.»  Error 2 ther system cannot find the file specified. »

  Where can I find the required file?  It is available from Microsoft to download?

  Thank you

  It could be a missing/incorrect servicesdll value. See if a request would help the BFE (#11) service registry fix in this page:

  Register various fixes for Windows 7/XP/Vista:
  http://www.Winhelponline.com/blog/Misc-registry-fixes-for-Windows-7-XP-Vista/

• Cannot start BITS (Background Intelligent Transfer)

  On my installation of Windows 8 relatively new applications running in the modern UI suddenly have no Internet access. Internet works for applications that run from the desktop. So I ran the corner store convenience store apps and Windows account. These seem to get stuck when you try to start BITS (Background Intelligent Transfer). Therefore, I tried to start this service manually, then get the 2147023828 error message, indicating that he has an addiction problem. I checked dependencies that are documented in the BITS service properties and they all work.

  This has bad consequences, for example Windows Update cannot start. So, are there clues?

  This same problem and error code.  Turns out that the Windows event logger has been disabled.  As soon as I enabled and started, BITS came immediately.

• Cannot start Firefox, crash even in Crash Reporter. Not be able to start in safe mode either.

  Cannot start Firefox. He goes to Mozilla Crash Reporter every time. I can't even start it Safe Mode.
  I tried to uninstall and delete all the files related to Mozilla Firefox in & AppData & and each base registry with RegEdit.

  I have run, or at least try, on a system with Windows 7 64 bit, 8 GB RAM, 314.22 driver for Nvidia GeForce GPU and a CPU Intel Core i5 2500 k CPU.

  Little help would be nice.

  Hi deliubogdan

  Try to remove the extension DataMngr (Datamngr.dll)

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • [816181/questions/816181]

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender: Home Page:
    http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Envy 17-j120us: high definition Audio Device, Code 10 device cannot start, yellow triangle

  My IDT audio works fine and its works my laptop well, but when I curls upward from my laptop to my TV via a HDMI cable, I output my laptop displays on my TV but no sound from my laptop on my TV came out. I think the problem is because there is something wrong with my high definition Audio Device. It has a yellow triangle next to him with a! in the middle of the yellow triangle in the Manager of devices under sound, video and game controllers. And when I click on properties on the high definition Audio Device, it says: "this device cannot start. (Code 10) {Operation failed} The requested operation failed. Any help would be great. Is CLEAN Windows 10 installed on a NEW HARD DISK. I HAVE NOT upgraded, windows 10 was clean installed from a disc.

  See if it works...

  Download and install this free utility for files.  The 2nd listed file is 64-bit.

  http://www.7-zip.org/

  Then download and save, but do not run the graphics driver Intel W10 from the support page of your laptop.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72370.exe

  Right-click on the file of the Intel graphics driver you just downloaded and select 7 - zip from the list of options.

  Have 7-zip extract of: and let it extract the file in the file name (sp72370).

  Go to Device Manager and click on the audio device HD of the problem.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.

• Portege Z830 - Infineon TPM device cannot start (code 10)

  Hello

  I have a new Z830 - 10F, and I am trying to configure Bitlocker (windows 7 - 64 bit).
  I have a problem with the Infineon TPM device. (Driver version 2.1.1.0)
  This device cannot start (code 10).

  I downloaded all the drivers from Toshiba, but it does not work.

  Any idea?

  Thank you.

  Hello

  The TPM is optional and not equipped Portege Z830-10F unit a module TPM.

  Welcome them

• HP 8440p: Audio device high definition - device cannot start (Code 10)

  I'm having a problem of isolation an indication in device with high definition Audio Device Manager. I have Intel Graphics with this machine. The OS is W10 Pro. I loaded the audio driver for Windows 7 64-bit, but that made no difference.

  Device Manager indicates that "this device cannot start (Code 10)"

  Driver date 09/07/2015 / Version - 10.0.10240.16384 / Microsoft driver

  Details tab - value = device high definition Audio

  Tab events - (information)

  Device HDAUDIO\FUNC_01 & VEN_8086 & DEV_2804 & SUBSYS_80860101 & REV_1000\4 & 36c4990c & 0 & 0301 requires installation.

  

  Any guidance is appreciated.

  Hi @JS2045

  The audio device problem HD, what you see is the Intel HDMI audio device that needs a driver.

  I looked around for a driver W10 to the hardware ID you have published and fails.

  This device is necessary unless you want or need audio via the port display.

  The only suggestion I can offer would be to try the graphics driver Intel W7 laptop support and driver page, but install it... so that you target just the audio device problem...

  Download, but do not work with this graphics driver...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095873 & swItemId = ob_127914_1 & swEnvOid = 4059

  Download and install this free utility for files.  64-bit is the second listed file.

  http://www.7-zip.org/

  After installing 7-zip, do a right-click on the graphic driver file you downloaded, and select 7 - zip in the list of items.

  Have 7-Zip extract of: and let it extract the driver for the name of the folder (sp64360).

  Go to Device Manager and click on the audio device problem Intel HD requiring the driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver 7-Zip created folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.

  If you explore the driver folder 7-zip created, and then open the DisplayAudio folder, you will find the setup information file that has the hardware ID you reported that supported by the driver.

  If this driver audio works on W10, I don't know.

  But if you want to give that a try, it would be a way to do it without messing with the real graphics driver.

• Re: Equium A210-1AS - blue screen and cannot start

  My computer was working fine, I stopped him, the next time I start up, it shows windows loading screen, then a second a blue screen flashes by, it restarts and repeats, I stopped and began to tap F8 until the advanced boot options appears, safemode ect... None of them work and lead all the blue screen If I select the repair option at the top 'Repair your computer' it begins to load with a background of vista and a cursor and then displays the error "the installed program cannot start. Click OK to turn off the computer. »

  in Advanced Startup Options that I try "disable automatic restart in the event of system failure" and the rest of the blue screen to the top, so I can see, it shows an error on usual blue screen, read:

  UNMOUNTABLE_BOOT_VOLUME
  STOP: 0X000000ED (0X85DDA600, 0 X 0000000, 0XC000009C, 0 X 0000000)

  I don't have a recovery CD, as I believe, there is a recovery partition, but I don't know how to access it-
  I use Equium A210-1AS
  Part number: PSAFJE-005005KS
  Windows vista 32 bit

  Thank you

  I know know that the recovery partition is consulted theough 'Repair your computer' but shows just "the installed program cannot start. Click OK to turn off the computer. »  :/

  null

  > I don't have a recovery CD as I believe, there is a recovery partition, but I don't know how to access to this

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

• Cannot start ATI Radeon HP g6 2304 su.

  I bought a new HP laptop. There are two cards - one integrated into iCore 5 - Intel HD 4000 and another - ATI Radeon 7670 M. The version of the BIOS is F.22. Operating system is Windows 8 64-bit. Memory is 8 GB of RAM.

  I had a problem with ATI Radeon graphics card. I spoke with the HP support center and they told me to install the chipset drivers, then only the drivers of ATI graphics cards (because the Intel graphics drivers is integrated in this driver). When I click on desktop I can see Configure Switchable Graphics and as I have read is in the dynamic menu mode and can choose application to run in saving energy or high performance.

  The problem is that I really think that cannot start ATI. For example, try to run a game online. I added in high-level sport, my battery settings is High Performance, AC adapter / CC is connected and when the game starts, can not choose the ATI card, only Intel HD 4000 is listed.

  In the Device Manager has also two cards listed (Intel HD 4000 Radeon 7670 m) and but in tools such as dxdiag is listed only Intel HD 4000, Information System Microsoft rendering driver base and name Intel(r) HD Graphics 4000, AIDA 64 in Windows Video and PCI/AGP video only listed Intel HD 4000 is listed.

  In the BIOS isn't an option to change a dynamic setting, or fixed.

  

  Could you give me an advice how I can start the card ATI Radeon.

  Sorry for my late reply.

  Then I tried everything.

  And finally, I take a computer to the original service.

  After a few days I guess. And now seems that everything is OK with ATI.

  Added a few games to High Performance began and after begins TechPowerUp GPU - Z. The sensors for the base ATI clock are moving. So I think everything is fine now.

  Understand that they solve this situation as older pilot.

  Thank you for the support.

• Windows Firewall does not start. Cannot start connection ICS internet sharing service

  Hi Please help, my computer has been infected by a pretty nasty trojan, (MEREDROP) I managed to remove it (and all of its subsequent downloaded files), but it was very difficult. in any case since that my windows firewall does not start. I get the error code. 1075 and the msg (windows cannot start (ICS) internet connection sharing service). I tried to replace registry files, I tried the system restore, I tried to change the permissions, I tried to turn it on manually, I've updated my BITS. Ive also ensured that the dependent services are running. According to my list of component services, they are... Nothing works. I need to format the HD for this problem or is there a standalone windows firewall available for download?

  Thanks for posting. Please note that the use of system restore after infection and removal of malware very probably re-infected your computer. Please follow all instructions on this thread HERE. Let us know the results.

• Windows Media Center Gets error: invalid Application - cannot start

  Windows Media Center (of the month last Vista 32-Bit)

  I have problems to make internet TV, news and Netflix to connect to the internet when you use Windows Media Center.  They are all under the TV + movies option during the WMC.  I get an error saying [invalid Application - cannot start "" ""].  Not sure if this is because the internet connection that I use is not one that has a user name or password.  Not know how to configure it for this version of Windows.  I don't get this problem when you use Windows Media Center in Windows 7.

  At the opening of Windows Media Center I get the following message: INVALID APPLICATION; "Unable to launch SymAddin; and a checkbox to disable this Application (I have not checked the box).
  http://social.answers.Microsoft.com/forums/en/vistapictures/thread/ea536e68-5903-444C-8d10-6bd9fa936dc9

  "Invalid application-unable to launch" Windows Media Center - MSNBC.com
  http://social.answers.Microsoft.com/forums/en/vistaprograms/thread/18c69d9b-e93d-4350-A17C-15ef9ae7d76f

  "Has anyone, using windows vista ultimate media center, was a 'failed to launch'"demand invalid." »
  http://Askville.Amazon.com/Windows-Vista-Ultimate-Media-Center-unable-launch-invalid-application/AnswerViewer.do?RequestId=2894719

  I guess that set up WMC is identical in both Vista and Windows 7?
  http://www.Microsoft.com/Australia/Windows/Windows-Media-Center/

  Your firewall is blocking access to the WMC?