Satellite C660 does not work after disasembling

Similar Questions

• Satellite A50 does not work after BIOS update

  Hi all
  I tried to Flash my BIOS through windows such as recommended on my website of the manufacturer of the laptop (Toshiba). I guess that the process was not as after only 2 hours still "don't interrupt" message displayed. I had to force power off of my PC. Now it is not initialized.
  The Laptio is Toshiba SA50-114, series of satellites. Model n - PSA50E

  I tried the suggestions in the following link
  http://askiris.Toshiba.com/ToshibaSu...200%2035586212
  However, it did not work.

  However, I don't have the disk recovery and file/ROM BIOS tool. Have tried to search on the internet, but without any result.

  Can someone help me please
  1. How can I update the BIOS to get my PC to running back.

  2. to turn towards links where I can find the files in the link above.

  Thanks in advance.
  Best regards
  Parag

  > 1. How can I update the BIOS to get my PC to running back.
  Not possible if your ROM BIOS module was bad flashed.
  If you are a lucky man only the ROM module must be flashed again using a special procedure. But this can be done by a service provider authorized in your country.

  > 2. Point me to the links where I can find the files in the link above.
  There is no link! You need to ask to help ASP.

  Good bye

• Re: Computer laptop Satellite U does not work after BIOS update

  I was updating my BIOS.

  My computer restarted abruptly, saying: there was a problem and that a check should be performed.
  After reaching 100%, he's stuck. I waited for a while, but eventually it turned off.

  When I rebooted, it stopped working correctly.
  The screen, keyboard and USB ports do not work.

  Can anyone help with this?

  Hello

  Looks like something was wrong during the update of the BIOS.
  In this case the module ROM was flashed properly and therefore your laptop cannot start properly.

  I think the BISO ROM must be flashed again, but this can be done by a Toshiba ASP because guys have had a trad-BIOS version that is necessary to Flash the ROM module

  Good luck

• Equium A300D - 16 c: USB/eSATA port does not work after disasembling

  Hi all

  I have the above machine which worked very well, so quite extraordinarily hot.
  I decided to open it and clean the dust, etc. of radiator and nowhere else that had gathered inside the case. All good, I thought...

  However, when reassembling it, 2 usb ports left (including one combined USB and eSATA) have stopped working!

  I could understand if it were those on the right who are on a daughter card, (for example if I forgot the cable), but they are part of the motherboard. I checked by plugging in various devices that work in good, but not the left.

  Check between the + and - ports with a multimeter, I get ~ 5V from the right and nothing from the left, even if at some point, I register 0.3V.
  I tried the network port that is correct, but cannot test the eSATA part as I have nothing to connect.

  Anyone has any idea what this could be?

  Thanks in advance!

  ige87

  > Control between the + and - ports with a multimeter, I get ~ 5V from the right and nothing in the left
  This means that there is no power on led USB port.
  To be honest, I have no idea what you did during the computer laptop disassembly procedure but it seems that damage you something on the motherboard.
  For me, it is a plausible explanation.

  Just a tip; check if eSATA is enabled in the BIOS.

• Re: Satellite L300 - camera does not work after upgrade to Win7

  As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

  There is no exclamation point in the system.

  Satellite L300 (PSLB8E)

  Hello

  What happens when you start the webcam app?
  All programs-> Toshiba-> webcam

  Did you install other 3rd software part as for example the Skype that could access the webcam?

  Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
  Start Skype for example, check the settings in Skype webcam chose correctly.

  It would be really interesting to know if the other software would be able to use the webcam.

  By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
  Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

• Satellite Pro C850 does not work after Bios Update

  My satellite pro c850 cd does not work after updating the bios of toshiba.

  What should I do?

  Saying: don t work do you mean it does not fuel upward or what do you mean exactly?
  Flash the BIOS correctly?

  Maybe something went wrong during the upgrade, which means that l ROM flashed module isn't properly

  In most cases a special disc of crisis of the BIOS would be required to operate
  Not sure if you can get it repaired by your own
  Check this thread. Maybe this helps:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

  Otherwise you need help of the authorized service provider available in your country.

• Satellite x 200: Webcam does not work after I have connection on Microsoft messenger

  Hello everyone

  I have a Satellite x 200 SLI and for some reason any webcam does not work after I login on messenger... Even when I disable messenger and even disable internet... it still does not. Only when I restart the operating system.

  Anyone has an idea on how to solve this problem?
  Already did the updates but still, anyway.

  Hi Gabriel

  Check it out!
  I noticed several discussions on this issue, it would be really interesting to know if the SP1 fixes this annoying problem

  Your comments would be appreciated

• Satellite A210 - 19(d) - Toshiba Disc Creator does not work after last update SP2

  Satellite A210 - 19(d), HomePremium Vista 32.
  Toshiba Disc Creator does not work after update to sp2. Error code is 32007C-26-00000001.

  He needs to click ok up to 17 times to eliminate the error window, but it is more.

  Everything was OK before sp2.

  Please take a look in this thread:
  https://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=60687

  It user pdun459 had the same error using the Toshiba Disc Creator and could solve this uninstall and installation of this new

• Satellite L870-165 does not work after having been repaired by their service

  Warranty Toshiba Laptop does not work after having been repaired by their service twice.
  Model: Satellite L870-165

  Computer does not start, rest with black screen showing: No bootable device - please restart your system

  After restarting the same thing happening again.
  I called incident phone Toshiba and after trying several options, I said take it for repair service.
  Told me first of all it was the hard drive, then called me to indicate this resettlement and ultimately it was the motherboard, what would have changed. The next day, being chosen computer repair returned to give exactly the same mistake, due to a malfunction only one night.

  After another call to 902 Toshiba warranty service, I went back to take the service, this time I changed the hard drive. When I arrived home the computer does not start only once, again gives the same error.

  I think this team comes with a default factory that his solution is not easy, because even the technical service told me I didn't know what to do with it.

  Sorry to hear all this. Unfortunately, we can not help you much so try please clarify this service. They help you with your laptop even if all must be exchanged.
  > Warranty Toshiba does not work after having been repaired by their service
  To be honest I don t understand this sentence. How old is your laptop? warranty is already expired?

• Satellite Pro M30-701: TouchPad does not work after installation of XP Pro

  My touchPad does not work after reinstalling XP Pro OS with recovery disk. I install a driver for Toshiba M30 - 701 Synaptics TouchPad tpdrv-sp-m30-xp - 7920.zip

  Can you help me solve the my problem please?
  Excuse my bad English...
  Thank you
  Jorge Neto

  HI Jorge,.

  If you have reinstalled your system using the Toshiba recovery disks the touchpad should have the right drivers and be fully functional. I seem to remember that it is possible to disable the touch pad using one of the "keyboard shortcuts" (F9 on my SA30) in order to check that it has not been inadvertently pressed.

  Kind regards

• Satellite P200 - 10 c: camera does not work after upgrade to Vista ultimate

  After the full vista upgrade webcam did not work. After some research, I found that I had to change the driver for usb video camera I did.

  Everything works fine now except the snap button of the camera software. Record audio and video works fine. Snapshot button does not work after you have clicked on it. Can someone help me solve this problem too.

  Hello

  you have reinstalled the software of the camera (not only the drivers) that controls the special features snapshot-thing like that?

  It should contribute to reinstall everything because vista is confusing every driver/software maximally... :)
  Would appreciate comments on your success.

  See you soon

• Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

  My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

  Hey Buddy,

  What does it mean exactly when you say he won t work?
  You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

  At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

• Satellite C50D-A-12 x - touchpad does not work after Windows Update

  the touchpad does not work after the windows updare

  I always recommend you read other threads / messages and spikes before considering opening new thread in the forum
  https://Forum.Toshiba.EU/showthread.php?82878

• Satellite L655 touchpad button ON / OFF does not work after the installation of VAP

  Why the Start button / stop the touch pad does not work after the installation of vap?

  May I ask what system and what PPV version do you have installed?

  I assume you mean on the Fn + F9 key combination...
  Is this right?

  Another FN button work as shouldy?

• Bluetooth on Satellite L500 does not work!

  Hey well im disappointing defetly of Pentecost suport of toshiba, they never anwser mi email, and when I call for the support that they did not fix the problem mi! After 2 monthas waiting they never remember!

  My Bluetooth on Satellite L500 does not work! I have upgraded from vista to 7 suport said that I probably had to put the Vista pc again to install the bluetooth, and upgrading them to 7. IM whit vista of Pentecost after using the restore cd.

  After that I read some post and install the drives still does not work!

  I try to install bluetooth monitor, then the battery Bt when battery is installing wask me to activate the bluetooth I use Fn + F8 and the battery does not install it!

  Any tips?

  Just do so for sure:
  You have enabled your wireless switch?