Cannot start device to host vCenter

Similar Questions

• Cannot start device USB (code.10) error

  Original title: device usb ayre

  Cannot start this device (code 10)

  Hello

  1. what operating system is installed on your computer?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps from the link below and check if it helps.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers: http://support.microsoft.com/kb/943104

  Hope this information is useful.

• Mode XP error: cannot start Virtual PC Host Process...

  I installed XP Mode, download carefully the x 64 version. But when I try to start it, I get, "Cannot start Windows Virtual PC Host Process".

  Hi SibTiger,

  This happens if your PC does not support hardware virtualization based.

  How to confirm your PC can run Windows XP Mode
  http://www.Microsoft.com/Windows/Virtual-PC/support/configure-BIOS.aspx Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Cannot start the VMWare host agent service

  I worked on this issue for awhile with no resolution.  Initially, I had a problem running VMWare Server Home Page so I installed the VMWare Server Console and the error when trying to launch the Console VMWare Server on the same server VMWare Server is installed and connect locally:

  501 command overall GLOBAL Server-vmdb targets no host agent not supported.

  Came to the conclusiong that it was the result of the function of Agent Host VMware is not able to start.

  Environment:

  IBM BladeCenter HT chassis

  IBM eServer HS21 - 8853AC1

  NetXtreme Broadcom5704S

  2 x Quad Core Intel Xeon E5440 2.83 GHz

  Initially, I installed VMWare Server 2.0 and then upgraded to 2.0.1 to see if that would solve the issue but always without success.

  Event Viewer message:

  Host VMware Agent service terminated with service specific error 4294967295 (0XFFFFFFFF)

  Not tried so far:

  1. I tried uninstalling and reinstalling several times without success

  2. Tried to manually start the VMWare host Agent

  3. Tried the upgrade to VMWARE 2.0 VMWARE 2.0.1

  4. Tried to uninstall and reinstall

  5. Tried to launch the service as ADMINISTRATOR

  It is the only VMWare Server service that does not start... I Googled, and I can't find a resolution to this problem.

  Post edited by: RDPetruska

  Emoticon removed from the subject line.

  Check this solution or search the Internet: "panic error: not well formed (invalid token)" (sorry, I don't have the time to search for you now).

  BTW. If IIS is installed and running, try to stop and start the vmware agent

  J.

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

  Post edited by: janlib

• Cannot start device code (10)

  Just for reference, my laptop is a gateway m465-e If this will help the answer
  in any case this is the problem even after installing my audio driver for sigmatel high definition audio device gives me a code 10 error appliance cannot be started. By the way I got the pilot of many different places, some are gateway, Device Doctor and same day microsoft technical support none of them worked to solve the problem

  http://support.Microsoft.com/kb/310123 hope this helps, Gerry Cornell

• Cannot start device - ASDM question Manager

  Hello

  I have recently updated our router to spare ASA 5510 to version 9.1 (3) with image ASDM Version 7.1 (5) 100.

  The customer I try to run the ASDM launcher on Windows 7 x 64 is the latest version of Java (updated 7-5).

  I am able to do at the hand of the screen when I have https to the device.  I can install the ASDM launcher, but as soon as I get the host name and the password I have the following error "could not launch 192.168.X.XXX Device Manager."

  I went through a checklist and I can confirm the following:

  -3des-sha1 license is activated

  -Http server is enabled for my customer subnet

  -ssl encryption is enabled

  -Tried Firefox and IE10

  When I try to run the ASDM via the browser I go as far as to ask for the password, and although the initial prompt seems to accept it, an another authentication box will appear asking you to do this over and over again in an infinite loop.

  I have lived through many forum posts and checklists, but I can't seem to identify this problem.

  If it helps, the box was already flashed back to factory default before I then applied the configuration from scratch (depending on the configuration of our live cam ASA 5510).

  Can anyone help please?

  Thank you

  Hi Anthony,.

  Since then, you must have more control on ASA:

  AAA authentication http LOCAL console

  Alongside this, there should be a user name and password in the local data base of the SAA. Then try to configure command, then check:

  username cisco password cisco

  After this attempt to access two cisco ASDM with username and password and check if it works or not.

  -Prateek Verma

• webcam works but the software cannot start the capture device

  Original title: webcam problems

  purchased the software igambin movie2 stop motion, as well as a logitech c500 webcam. The webcam works but the software cannot start device capture. The support of igambin seems to think that it might be the interface or something access to webcam all the time. Any ideas out there. Thank you

  Hi reefwatcher,

  1. Did you the latest changes on the computer?
  2. You are able to use the webcam on other applications?
  3. You receive an error message?

  Method 1

  To check if a program is installed on the computer interferes with the software, I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If fails it above step, try uninstalling and then reinstalling the program, check to see if it helps.

  http://www.ikitmovie.com/15/stop-motion-animation-tutorial.htm

  http://www.ikitmovie.com/free-trial-stop-motion-software.php

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 3

  If the previous step fails, then you will need to contact the software retailer for assistance.

  http://www.ikitmovie.com/contact-us.php

• AMD network adapter cannot start

  Hello world

  I just install Windows 2003 Server on my virtual machine. I can't connect to the Internet while troubleshooting using ipconfig at the command prompt, it generates no ip address. I checked my card NIC cannot start Device Manager. I uninstalled and reinstalled and also haven't tried upgrading the driver no results. Any help how to solve this problem?

  Thank you

  Have you installed VMware Tools?  This will add the virtual NIC - VMXNET driver. The NCI AMD is the default NIC identified by plug-and-play os when vmware tools is not installed-

• Another type of "this device cannot start. (Code 10) "failure

  Environment:

  EM250 Netbook (basically an Acer)

  Windows 7 Starter

  Sansa Clip + 4 GB

  Version V01.02.15A

  Basically, is that the device will not work in MTP mode.  Works very well in MSC, but PSG is necessary because the unit was purchased specifically for use with audible.com audiobooks, and it does not have MSC mode.

  Got the "this device cannot start. (Code 10) "goodbye, looking for inproperties after the driver will not load.  Two "insertion events" beeps during the process

  Tried the "'Net local service localgroup administrators / add" to http://kb.sandisk.com/app/answers/detail/a_id/192 "

  The command was successful, but has not fixed the problem.

  Tried updating all the drivers I could find.  A ran the sansa updater to make sure everything was up to date.

  The device can't the same way on an Acer netbook and similarly on a Windows XP desktop.

  I look at the installation in the control panel Device Manager, you can see the low level driver loading and the portable device become active, but then the level user MTP driver fails.

  from the event viewer, I see the following events associated with inserting

  Event ID 24576 information: "Drivers have been correctly installed for device USB\VID_0781 & PID_74D0 & REV_: 8<>

  25089 Information event ID: 'it was not possible to access the device () after installing the drivers. Error code 0 x 80070651. »

  Event ID 10110 critical: "there was a problem with one or several drivers from user mode and the hosting process is finished.  This can temporarily interrupt your ability to access devices. »

  Event ID 10111 critical: "the device USB MTP Device (location Port_ #0003.Hub_ #0005) is offline due to a user-mode driver accident."  Windows will attempt to restart the Unit 5 times more.  Contact the device manufacturer for more information on this problem. »

  I suspect the key error is the "error code 0 x 80070651.", but I have not found a solution for her online that works

  I tried the technique of driver to uninstall without success.  After the step to "Discover new material" he would miss just the same way.

  I just found a way that worked well.  I have re-installed the firmware.  Not through the Sansa Updater.  This program would simply note that my Clip + release the latest version, then give up.

  Instead I manually re-installed the firmware using the process that the people of Mac and Linux have to use. detailed on the

  http://forums.SanDisk.com/T5/clip-Clip/Sansa-clip-firmware-update-01-02-15/TD-p/150227

  In short, it is to download the zip to show off to

  http://mp3support.SanDisk.com/firmware/ClipPlus/clipplus01.02.15.zip

  Unizip it, then move the two files to the root of the Clip + while it is mounted in MSC mode.

  When he unplugged the updates the firmware.

  I don't know if it was a step necessary or not, but I also reformatted the Clip + menu.  In any case, it now amounts to PSG. mode.

• USB 3 doesn't work does not Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  ASUS sabertooth z77 motherboard, bios updated. USB 2 USB 3 does not work. Have uninstalled root hubs that show problems and restarted the computer, do not solve the problem, still getting the "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "message under properties. Specific location of the hub of the problem: ASMedia USB 3.0 eXtensible Host Controller - 0096 (Microsoft).

  Please notify. If it is a regedit fix, please help with details. Thank you!

  When I rebuilt my system, I went step by step in reinstalling the software.  I understand that better, my usb problems related to Asus motherboard utilities.  These are not entirely compatible Windows 8 and introduce problematic drivers.  Finished to start my Acronis True Image boot USB and backup of backup image of this morning.  Problem solved.

  Staying away the Asus utilities for now... btw, Asus technical support on my problems was totally useless, even if the code 19 errors point to hardware problems, which are covered by the guarantee.

  If you use the Asus utilities, you may be able to rebuilt without them...

• Envy 17-j120us: high definition Audio Device, Code 10 device cannot start, yellow triangle

  My IDT audio works fine and its works my laptop well, but when I curls upward from my laptop to my TV via a HDMI cable, I output my laptop displays on my TV but no sound from my laptop on my TV came out. I think the problem is because there is something wrong with my high definition Audio Device. It has a yellow triangle next to him with a! in the middle of the yellow triangle in the Manager of devices under sound, video and game controllers. And when I click on properties on the high definition Audio Device, it says: "this device cannot start. (Code 10) {Operation failed} The requested operation failed. Any help would be great. Is CLEAN Windows 10 installed on a NEW HARD DISK. I HAVE NOT upgraded, windows 10 was clean installed from a disc.

  See if it works...

  Download and install this free utility for files.  The 2nd listed file is 64-bit.

  http://www.7-zip.org/

  Then download and save, but do not run the graphics driver Intel W10 from the support page of your laptop.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72370.exe

  Right-click on the file of the Intel graphics driver you just downloaded and select 7 - zip from the list of options.

  Have 7-zip extract of: and let it extract the file in the file name (sp72370).

  Go to Device Manager and click on the audio device HD of the problem.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.

• Portege Z830 - Infineon TPM device cannot start (code 10)

  Hello

  I have a new Z830 - 10F, and I am trying to configure Bitlocker (windows 7 - 64 bit).
  I have a problem with the Infineon TPM device. (Driver version 2.1.1.0)
  This device cannot start (code 10).

  I downloaded all the drivers from Toshiba, but it does not work.

  Any idea?

  Thank you.

  Hello

  The TPM is optional and not equipped Portege Z830-10F unit a module TPM.

  Welcome them

• In Device Manager it says code 10 - this device cannot start (read message)

  In Device Manager next to the icon for pioneer DVD - RW DVR-K17A Device, it has a yellow! triangle and when I click on it, it says this device cannot start code 10. I received the laptop in June and had not noticed the problem til now. When I followed the instructions for possbily install updated drivers/software I did but said that I am up to date.
  Thank you

  First of all: what kind of machine do you have and what operating system is installed on your laptop? Without this information, no one would be able to help you.

  Regarding your problem: I could check this site-> http://support.microsoft.com/kb/943104/ or check this document-> http://support.microsoft.com/?scid=kb%3Ben-us%3B314060&x=12&y=13 (I know, is not the error code of your question, but you can try anyway :))

  Greetings

• HP 8440p: Audio device high definition - device cannot start (Code 10)

  I'm having a problem of isolation an indication in device with high definition Audio Device Manager. I have Intel Graphics with this machine. The OS is W10 Pro. I loaded the audio driver for Windows 7 64-bit, but that made no difference.

  Device Manager indicates that "this device cannot start (Code 10)"

  Driver date 09/07/2015 / Version - 10.0.10240.16384 / Microsoft driver

  Details tab - value = device high definition Audio

  Tab events - (information)

  Device HDAUDIO\FUNC_01 & VEN_8086 & DEV_2804 & SUBSYS_80860101 & REV_1000\4 & 36c4990c & 0 & 0301 requires installation.

  

  Any guidance is appreciated.

  Hi @JS2045

  The audio device problem HD, what you see is the Intel HDMI audio device that needs a driver.

  I looked around for a driver W10 to the hardware ID you have published and fails.

  This device is necessary unless you want or need audio via the port display.

  The only suggestion I can offer would be to try the graphics driver Intel W7 laptop support and driver page, but install it... so that you target just the audio device problem...

  Download, but do not work with this graphics driver...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095873 & swItemId = ob_127914_1 & swEnvOid = 4059

  Download and install this free utility for files.  64-bit is the second listed file.

  http://www.7-zip.org/

  After installing 7-zip, do a right-click on the graphic driver file you downloaded, and select 7 - zip in the list of items.

  Have 7-Zip extract of: and let it extract the driver for the name of the folder (sp64360).

  Go to Device Manager and click on the audio device problem Intel HD requiring the driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver 7-Zip created folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.

  If you explore the driver folder 7-zip created, and then open the DisplayAudio folder, you will find the setup information file that has the hardware ID you reported that supported by the driver.

  If this driver audio works on W10, I don't know.

  But if you want to give that a try, it would be a way to do it without messing with the real graphics driver.

• Penn tablet function does not work. Cannot start the HID device

  On my Portege M200, I reinstalled WXP Tablet 2005. Under human interface devices, it detects a serial penn wacom tablet, a device interface human usb and an hid-compliant device.

  But penn isn't all fucntion. When I install the latest drivers from wacom penabled, I get a "wacom penabled HID minidriver" device but it has a yellow triangle with the error this device cannot start error 10.

  Is my tablet broken?

  (apparently you can not say penn on this forum)

  Hello

  May I ask where did you download the driver?
  It seems that the driver is not supported or is not compatible.
  Code 10 means-> device could not start.
  You simply need to use the driver from the Toshiba page and click on update driver to update the drivers for this device.