In Device Manager it says code 10 - this device cannot start (read message)

Similar Questions

• Satellite A110 - SD card reader - error message code 10 this device cannot start

  I have a number of cards memory SD, who used to work with the machine's card reader but now gives a code 10 this device cannot start, error message - is this a problem XP - ideas appreciated...

  Hello

  Well, it sounds to be really an XP problem. Eventually he s corrupt registry entry.
  Just try to remove the SD card from the Device Manager reader, and after restarting again try to install it again

  Next

• in the Device Manager window.there is a brand of (!). Microsoft tun miniport adaptor.this device cannot start. (code 10)

  in the Device Manager window.there is a (!) brand microsoft tun miniport adaptor.this device cannot start. (code 10) hmendezlopez

  Hello

  Control Panel - Device Manager - do right click on them - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
  and on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message
  http://support.Microsoft.com/kb/932520

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite Pro A10: New card wireless Atheros/Askey, but "this device cannot start" code 10

  Hello

  I have a Satellite Pro A10 and bought an internal pci wireless adapter. The following information is displayed on my card:

  Askey WLL3070-D4 (MOW)
  Atheros AR5BRB-43

  I installed the card, attached to the ariel and turned on the laptop... the switch at the front lights up now and Windows xp detects the new ethernet adapter. My problem is the following...

  Any driver I install (and Ive tried all the drivers of the first 20 + pages of yahoo/google Askey/Atheros etc.) the card installs very well but then in device manager has a yellow! next to him and says this device cannot start (code 10)

  I am really puzzled. I have little ram more to come in the next few days how I am installng Vista im hoping sort my problems, but someone has any ideas?

  I have not yet find a driver which specifically refers to the AR5BRB or the WLL3070-D4 model number.

  Does anyone have a location for a pilot, etc.?

  Thank you

  Hello

  I always use this page for WLan driver update:
  http://APS.toshiba-tro.de/WLAN/

  It is a Toshiba WLan driver portal and you will find all the necessary drivers for WLan

  Ciao

• Get a Code 10 error "this device cannot start' for my optical drive

  Hello

  I am running a Dell Studio 540 with the following specifications:

  Processor: Intel Q6600 @ 2.4 GHz

  RAM: 4 GB

  HD: 750 GB 7200 RPM SATA

  Graphics card: nVidia 9800GT 512MB

  OS: Windows Vista Home Premium 32-bit

  All the drivers and BIOS are up-to-date.

  My current optical drive is an Optiarc DVD +-RW AD-7200 s ATA Device Unit which has now disappeared from "My Computer". By opening the Device Manager, it has a small yellow triangle with an exclamation mark inside. When I click on it that a new window will open and in the device status area, he said:

  This device cannot start. (Code 10)

  Currently, I have tried two methods without success. First, I downloaded the latest drivers/firmware for the optical drive directly from the Dell Web site, but to try to install, I get an error box saying that the "target drive is not properly".

  I also ran the Mats_Run.devices of the Microsoft Automated Troubleshooting services who correctly identified the problem, but said he could not address them and directed me to these forums.

  Any help would be greatly appreciated.

  Thank you for your time,

  Donald Lundie

  Hello

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  As you have already tried updating the drivers for the device, you can just go through the article that talks about the Code 10 error.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104/

  You can run the fix in the below article data and check if this is useful.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After a custom Windows 7 installed on a Toshiba Satellite P105-S6084, my audio device does not start. Error code: this device cannot start. (Code 10)

  I got driver Conexant speakers on my laptop. I tried to find a device driver updates, but have had no luck. After being in Control Panel, hardware and audio, Device Manager, sound, video and game controllers, under that is high definition Audio Device with a yellow triangle and!.

  After a right click and update driver, it says that the driver is up-to-date. In addition, the error code says this device cannot start (Code 10)

  In addition, this seems to be a driver of Microsoft when the original driver was Toshiba/Conexant. I looked on the support Web site of Toshiba for a driver updated for my laptop and Windows 7.

  Any suggestions?

  Umesh P,.

  Thank you for answering my question. I don't know that this forum allows you to stay busy. Thank you for taking the time to answer my question.

  To sum up, I checked the Windows Audio and Windows Audio EndPoint Builder according to your instructions. Both were running as usual and start automatically, so it wasn't the issue.

  I then visited Fix It. On the web page, since I am under Windows 7, the instructions on the provided web page to access the control panel and through system and security, to try to resolve the problem to fix common computer problems.

  This process led me through the same re-setup of the device through Windows 7 driver that failed previously. Also because it has detected Windows 7, the web page would allow me to run the Fix It program.

  When I visited the Support from Toshiba web page you provided, I was unable to find a sound driver for Windows 7. After filtering through my computer on their web page, the nearest driver was for Vista.

  Take a chance, I downloaded it anyway. What has been the worst that could happen? It does not work? Well, I was there already. In any case, the installation worked and I now the audio again.

  Moreover, this is the link for the driver, for anything that might be in a similar situation I've been:

  driver_audio_conexant_25636A.exe

  -or-

  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/driver_audio_conexant_25636A.exe

  Also, Conexant offers no direct audio driver support and ask you to check with the manufacturer, which in my case is Toshiba. Toshiba not currently has an audio driver Windows 7 for my particular Satellite phone. Since this is an older, they can't come out with an updated driver.

  But, since the audio driver Vista download works, it is now a non-issue.

  Thank you!

  Jay

• USB Mass Storage Device gives me the Code 10 error. This device cannot start

  I have an external hard drive, Iomega Prestige 1 TB and one of the people at the school he fell from the top of the computer tower that resembled a fall of 30 cm, after it still worked, but then a few minutes later there not later he was still able to connect but it kept asking me to format it , so I wanted to try and find a way to get my data without formatting it. A day later I plugged the external hard drive, it started to beep for 5 min then it connected to the computer but unfortunately didn't show up in my computer, but he did it in the printer and peripheral. I checked my device manager and it showed a yellow explanation mark with the USB mass storage device. I went to properties and it says: "this device cannot start. (Code 10) "How can I solve this problem?

  Hi AntonioDavism,

  You can check if the following is useful.

  Method 1: Run the hardware and devices Troubleshooter and check if that helps.

  Method 2: Follow the steps in the below article mentioned and look for the question.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

• NIC does not: "this device cannot start. (Code 10) »

  My internet connection does not work (although I can always get a wireless connection) to my computer. The "82567V-2 network connection intel Gigabit ' says"this device cannot start. (Code 10) ». I've updated all the drivers. If the material is broken-how would I replace/fix it?

  Hey Tyler,

  1 you can use the wired connection before with no problems?

  2 did you a recent software or hardware changes to the system?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows.

  You can try to uninstall and reinstall the network adapter:

  a. click Start and type in Device Manager in the start search and press enter.

  b. expand the network adapters in the Device Manager

  c. right-click on the device and click on Properties.

  d. click on Driver tab and click on uninstall the drivers and then OK.

  e. restart the computer and check.

  You can also see the Intel support Web site and try to install the latest version of the network adapter drivers.

  For more information, see the articles:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  Wireless and wired network problems

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Canon HG20: this device cannot start (code 10)

  Hi all

  My Canon HG20 camcorder works well on Windows XP. But it's not on Windows 7 64 bit.

  Here's what happenning:

  -The camera is recognized when I connect (via USB) to the PC photo transfer mode.

  -It is not recognized when I connect (via USB) transfer of film mode.

  -In "Devices and printers", the camcorder is shown, but with a yellow exclamation mark on it, notify a problem.

  -The properties panel (right click-> properties) shows "device status: this device cannot start (Code 10)".

  -(Right click-> troubleshooting) troubleshooting completed but fails: "USB mass storage has a driver problem.

  Any suggestions would be greatly appreciated.

  Thanks in advance.

  Hello

  You can try to launch its convenience store and check out what he has to say.

  Here's how you can do:
  1. click the Start button, and then select devices and printers.
  2. right click on the mouse and select troubleshooting.

  I also suggest to install windows update and check if that helps. Also update the drivers chipset, for this you may need to contact the manufacturer of your computer.
  See the article below to install windows update.

  Install Windows updates
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  http://www.USA.Canon.com/OPD/controller?Act=OPDSupportDropDownAct
  http://www.USA.Canon.com/OPD/controller?Act=OPDContactUsAct

  Hope this information is useful.

  Umesh P - Microsoft Support

• After the upgrade to Windows 8, problem with teredo tunneling adapter says code 10 error and the device cannot start

  Original title: teredo tunneling adapter error number 10 on windows 8

  on my acer travel mate 6292 which I just upgraded to windows 8 pro recently got a problem with teredo tunneling adapter.

  It says error code 10 and that the device cannot start, it made me unable to use wifi on my laptop

  I tried to reinstall the driver but it just says: windows encountered a problem installing and he says its error code 10

  Please help me

  Thanks in advance

  Hi Samuel,.

  We appreciate your efforts to solve this problem. We will put all our efforts in order to solve the problem.

  Teredo is a tunneling protocol designed to grant IPv6 connectivity to nodes that are located behind IPv6 NAT (network address translation) not compatible devices. It defines a way of encapsulating IPv6 packets in IPv4 UDP (User Datagram Protocol) datagrams can be routed through NAT devices, on the IPv4 internet.

  I wish to inform you that Acer has not released Windows 8 compatible drivers for Acer 6292 travel companion.

  I suggest you try to install the drivers for the card wireless in compatibility mode and check if it works. Check out the following link to download and install drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  The link below to download the drivers for the wireless card: http://us.acer.com/ac/en/US/content/drivers

  A Code 10 error is generated in the Device Manager in one of the following situations:

  1. the Device Manager cannot start the device.

  2. one of the pilots who needs the unit does not start.

  3 device Manager has sufficient information to recognize the error that spread upwards by the device driver.

  We could try following common resolutions to solve the problem:

  1. update the drivers for this device

  2 launch a service of automated troubleshooting

  3 contact material supplier technical support

  For more information, please see the following article:

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  http://support.Microsoft.com/kb/943104/en-us

  In addition, this article could also be designated:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-in/Windows/fix-network-adapter-problems#1TC=Windows-8

   

  Please answer us on the State of the question to help you further.

• This device cannot start. (Code 10) DVD

  I have a HP Pavilion a1240n runnning Windows 8.1 nor the ATA DVD HP 740 b device or appliance IDE\CdRomLITE-ON_DVDRW_SOHW-work. I get the following message appears in the Device Manager box

  This device cannot start. (Code 10)

  The specified request is not a valid operation for the target device.

  Tried to deactivate, activate, uninstall and reinstall. The drivers are all to date. Are these DVD and CD with Windown 8.1 comaptibe?

  I also have problems with the computer recognizing my drive external USB and iPod.

  Impossible to update a such there need of files on the disk and hard drives do not work.

  Help please I know it's an old computer, but really like it to be fully functional. Thank you.

  Hello:

  Try each resolution 2, 3 and 5 from the link below to solve the problem you are having.

  https://support.Microsoft.com/en-us/KB/314060

• Teredo Tunneling Pseudo-Interface - This device cannot start. (Code 10)

  Original title: code10microsoft toledo tunnelling

  We think we've found a driver but we are not sure because he vomits again code.10

  Hello

  1. don't you make changes to your computer before this problem started?

  2. What is the brand and model number?

  If the device has a FailReasonString value in its hardware key, that string is displayed in the error message. The driver or enumerator places this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message: this device cannot start. (Code 10)

  You can try the following steps and check if that helps you solve the problem.

  Method 1:

  Open the Device Manager and the analysis of new hardware and select 'Show hidden devices' in the view menu and check if you find errors.

  a. Open command prompt with administrator credentials (type CMD and right - click Run as administrator).

  b. Type "netsh" and ENTER.

  c. Type "int teredo" and ENTER

  d. type 'set disabled state' and ENTER.

  e. open the Device Manager and uninstall "Teredo Tunneling pseudo-interface".

  f. Open command with administrator credentials prompt once more.

  g. type netsh + ENTER.

  h. Type "int ipv6" + ENTRY

  i. type 'set teredo client' + ENTRY

  j open the Device Manager and the analysis of new hardware.

  k. Select 'Show hidden devices' in the view menu. You will see now that she is present without errors.

  Method 2:

  If the steps above do not help, you can try to uninstall the drivers of the computer network and reinstall and check if that helps. Before uninstalling the network drivers, make sure that you download the latest drivers on the site of computer manufacturers. Follow the steps below to uninstall the network adapter.

  Follow the steps below to uninstall and reinstall the network card.

  a. click on start

  b. in the type of search box of start of "devmgmt.msc" and press enter

  (c) in Device Manager, expand network adapters

  d. right-click on the network adapter and uninstall.

  e. restart the computer, and then reinstall the network card.

  Note: When uninstalling device drivers make sure you put a check mark against 'delete the driver for this device '.

  I hope this helps.

• This device cannot start. (Code 10)

  I accidentally deleted my sound driver and have more noise. the error message im receiving to the IDT codec high definition: this device cannot start. (Code 10)

  Hello

  1. what operating system is installed on your system?

  2. did you of recent changes to the system before the show?

  Method 1:

  Follow the link below and follow the steps and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Also, check out the link below and see the description of the error code 10.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Let us know if it helps.

• Another type of "this device cannot start. (Code 10) "failure

  Environment:

  EM250 Netbook (basically an Acer)

  Windows 7 Starter

  Sansa Clip + 4 GB

  Version V01.02.15A

  Basically, is that the device will not work in MTP mode.  Works very well in MSC, but PSG is necessary because the unit was purchased specifically for use with audible.com audiobooks, and it does not have MSC mode.

  Got the "this device cannot start. (Code 10) "goodbye, looking for inproperties after the driver will not load.  Two "insertion events" beeps during the process

  Tried the "'Net local service localgroup administrators / add" to http://kb.sandisk.com/app/answers/detail/a_id/192 "

  The command was successful, but has not fixed the problem.

  Tried updating all the drivers I could find.  A ran the sansa updater to make sure everything was up to date.

  The device can't the same way on an Acer netbook and similarly on a Windows XP desktop.

  I look at the installation in the control panel Device Manager, you can see the low level driver loading and the portable device become active, but then the level user MTP driver fails.

  from the event viewer, I see the following events associated with inserting

  Event ID 24576 information: "Drivers have been correctly installed for device USB\VID_0781 & PID_74D0 & REV_: 8<>

  25089 Information event ID: 'it was not possible to access the device () after installing the drivers. Error code 0 x 80070651. »

  Event ID 10110 critical: "there was a problem with one or several drivers from user mode and the hosting process is finished.  This can temporarily interrupt your ability to access devices. »

  Event ID 10111 critical: "the device USB MTP Device (location Port_ #0003.Hub_ #0005) is offline due to a user-mode driver accident."  Windows will attempt to restart the Unit 5 times more.  Contact the device manufacturer for more information on this problem. »

  I suspect the key error is the "error code 0 x 80070651.", but I have not found a solution for her online that works

  I tried the technique of driver to uninstall without success.  After the step to "Discover new material" he would miss just the same way.

  I just found a way that worked well.  I have re-installed the firmware.  Not through the Sansa Updater.  This program would simply note that my Clip + release the latest version, then give up.

  Instead I manually re-installed the firmware using the process that the people of Mac and Linux have to use. detailed on the

  http://forums.SanDisk.com/T5/clip-Clip/Sansa-clip-firmware-update-01-02-15/TD-p/150227

  In short, it is to download the zip to show off to

  http://mp3support.SanDisk.com/firmware/ClipPlus/clipplus01.02.15.zip

  Unizip it, then move the two files to the root of the Clip + while it is mounted in MSC mode.

  When he unplugged the updates the firmware.

  I don't know if it was a step necessary or not, but I also reformatted the Clip + menu.  In any case, it now amounts to PSG. mode.

• DVD/CD RW optiarc dvd rw ad-7560 s ata device suddenly stopped working I get a "code 10 this device cannot start.

  My CD/DVD RW optiarc dvd rw ad-7560 s ata device suddenly stopped working I get a "code 10 this device cannot start.  I have uninstalled and still get this error.  When I put a CD in nothing happens.  It is not read.  Any suggestions?

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">