Mode XP error: cannot start Virtual PC Host Process...

Similar Questions

• Cannot start Windows Virtual PC host process. Check the log of the events system for more details

  Hello

  I am running Win 7 Home Premium 64 and seek to install Windows XP Mode Virtual PC.

  I followed the instructions at: http://www.microsoft.com/windows/virtual-pc/download.aspx and receive the following:

  "Windows Virtual PC. Cannot start Windows Virtual PC host process. Check the log of the events system for more details".

  He does not point me to the "system event log", but he leaves me here. Any advice?

  Thank you

  Hello

  Ideally, this error message indicates that your processor does not support the against hepatitis a (hardware support for virtualization)function.

  Cause:

  Windows Virtual PC and Windows XP Mode are supported only on computers whose CPUs are the HAV feature is enabled. Therefore, if your processor does not support the functionality of HAV or if this feature is disabled, you cannot start the virtual machines in Windows Virtual PC.

  To resolve this problem, follow the steps mentioned in the link below

  Error message about Virtualization-aided material for Windows XP Mode in Windows Virtual PC on a computer that is running Windows 7

  http://support.Microsoft.com/kb/977206

• error: "error cannot start fron CD-error 5."

  Original title: cannot restart from a cd

  Hello

  I'm trying to restart xp so that I can use a Norton recovery CD. However rebooting and pressing the prioritization boot from the windows cd comes up with "error cannot start fron CD-error 5."

  Any ideas?

  Thank you

  The disk you are trying to boot from was not burned correctly. You will not be able to boot from it.

• Cannot start device to host vCenter

  Nice day. I have a strange here and can't find any info on the web, hoping someone can help. I have 2 5.5 ESXi hosts, one of them is running device vCenter. I can't start the machine vCenter using the following command from the command-line... vmsvc/power.on vim - cmd 14 (14 being the ID of the device of vCenter). All other VMs on the host started very well by using this command. When I tried on vCenter, I get no response, no error, nothing. The order is always suspended more than an hour now. I already tried to simply recharge the host but got the same problem, trying to start vCenter device. The CLI is now completely useless... Can I push on and get a return transport but nothing else, cannot ESC, out of order or the CLI or whatever it is. Anyone seen this before? Any suggestions?

  This article solved my problem. I consulted the host directly through vSphere, has been able to view the data store and the files of the virtual machine. Renamed .vswp and .lck files and she pulled up in 2 seconds approximately. Much thanks to the author of this article

  http://www.virtxpert.com/failed-start-virtual-machine-error-18/

• my hp g62 cannot start virtual wifi

  I could start virtual wifi and I have connected to the internet. Then I interface with virtual wifi with my android phone, but cannot connect to the internet. Then after I search the Internet, but now I can't<2t virtual="" wifi="" by="" accident="" .="" please="" help="">

  Hello

  Have you tried the steps on December 12, 2012?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  See the article mentioned below.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Method 1:
  You can run the fix it and check.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:
  You can make sure that the latest drivers are updated on the Web site of the manufacturer.

  What to do when a device is not installed correctly

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Error when starting Virtual Machine

  I get this error when you start virtual machine

  Message from localhost.localdomain: VMware ESX

  Could not find the virtual disk "FedEx, Windows 2008.

  R2.VMDK ". Please check that the path is valid and try

  Once again. Failed to open the disc

  ' / vmfs/volumes/4bf00f15-0c137e98-8169-00221 -.

  9880d 03/Windows 2008R2 FedEx/FedEx 2008

  Windows R2 - 000004.vmdk' or one of the

  It depends on the instantaneous discs. Reason: the

  system cannot find the specified file.

  Info

  2010-06-02 04:09:32

  root

  
  
  Brent W Peterson
  
  My blog staff non-techie, unconnected with

  I use nano as my editor, but you can also use vi.  Also, I would make it to the console

• Flash player updates not error cannot start because sliprt.dll is missing

  will not be updated to flash player. error, says program cannot start because sliprt.dll is missing. and yes my win7 w / MSSE is updated and clean. someone at - it solved this problem? just started w / flash was last updated. Thank you, tom

  sliprt.dll is not a MS file, it can be provided with a download accellorator program.

  Flash Player is not a program of MS, but is supported on the adobe flash player site

• Error "Cannot start service bluetooth stack" whenever I restart my computer.

  Original title: I have Windows 7 and have a "cannot start service bluetooth stack" error message whenever I restart my computer.  Can you help me solve this problem?

  I have Windows 7 and you have a "cannot start service bluetooth stack" error message whenever I restart my computer.  Can you help me solve this problem?

  Hello

  You did it all changes before the show?

  Method 1: Manually start the Bluetooth service.

  a. Click Start, type services.msc and press to enter.
  b. in the list of components, double-click Bluetooth support Service.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click on apply and then click ok.
  e. check if the problem persists.

  Method 2: Put the computer to boot and see if that helps:

  A clean boot to check if startup item or services to third-party application is causing this issue.

  Reference: How to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

• Cannot start the VMWare host agent service

  I worked on this issue for awhile with no resolution.  Initially, I had a problem running VMWare Server Home Page so I installed the VMWare Server Console and the error when trying to launch the Console VMWare Server on the same server VMWare Server is installed and connect locally:

  501 command overall GLOBAL Server-vmdb targets no host agent not supported.

  Came to the conclusiong that it was the result of the function of Agent Host VMware is not able to start.

  Environment:

  IBM BladeCenter HT chassis

  IBM eServer HS21 - 8853AC1

  NetXtreme Broadcom5704S

  2 x Quad Core Intel Xeon E5440 2.83 GHz

  Initially, I installed VMWare Server 2.0 and then upgraded to 2.0.1 to see if that would solve the issue but always without success.

  Event Viewer message:

  Host VMware Agent service terminated with service specific error 4294967295 (0XFFFFFFFF)

  Not tried so far:

  1. I tried uninstalling and reinstalling several times without success

  2. Tried to manually start the VMWare host Agent

  3. Tried the upgrade to VMWARE 2.0 VMWARE 2.0.1

  4. Tried to uninstall and reinstall

  5. Tried to launch the service as ADMINISTRATOR

  It is the only VMWare Server service that does not start... I Googled, and I can't find a resolution to this problem.

  Post edited by: RDPetruska

  Emoticon removed from the subject line.

  Check this solution or search the Internet: "panic error: not well formed (invalid token)" (sorry, I don't have the time to search for you now).

  BTW. If IIS is installed and running, try to stop and start the vmware agent

  J.

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

  Post edited by: janlib

• Windows XP, Skype 5.0, Logitech Pro 9000 Webcam, video error: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  Everything has worked out well until the Skype 5.0 download.  Since then, the video does not appear on my screen and displays the following message: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  The driver is up to date and I have DirectX 9.0 c v.

  Thanks in advance for your help.

  Hello.  After several back-and-successive, customer relationship Skype sent me the link depending on where you can get an older version of Skype (4.2.0.187) and many other software if you need. http://www.oldapps.com/Skype.php  I installed it and the audio and video are working as it should with the Logitech Webcam Pro 9000 and Windows XP.

• Cannot run Virtual ESX host configured in my Asus u56e laptop machine. Says Intel Vtx unsupported...

  Friends,

  I can't run Virtual ESX host configured in my Asus u56e laptop machine. Explains Intel Vtx unsupported.

  I checked to find that my machine has Intel VT turned on in the Bios.

  Please notify. I tried to use VMware-guest64check - 5.5.0 - 18463 tool and it said that my machine can support 64 bit OS. Fixing of newspapers.

  In my computer, open your VM ESXi and go to VM-> settings.  Under processors, check the box next to 'Virtualiser Intel VT-x/EPT or AMD-V/IVR.'

• Error at startup of Vista: "host process for Windows services stopped working and was closed".

  Original title: problem with Vista

  There is this error message whenever he starts to the top and pop up at any time.

  "Host process for Windows services stopped working and was closed".

  "a problem caused the application to stop working correctly.

  How should I do? and my lower start bar turned white based

  Hello KenricLow,

  Try this to see if you can connect.
  Boot to safe mode.

  To access Safe Mode:
  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  (b) select an option when the Windows Advanced Options menu appears, and press ENTER.
  (c) when the boot menu appears again, and the words "Safe Mode" appear in blue at the bottom, select the installation that you want to start, and then press ENTER.

  Of in safe mode, type msconfig in the start in the start menu search box and press return. Then on the Startup tab, uncheck the box any reference to the verisign/authentec software. Then, go to the services tab, sort the columns by manufacturer, then uncheck all references to Verisign. Then click ok and restart in normal mode.

  If please reply back and let us know if that helped to turn out to get rid of your error message.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot start virtual machines on Windows - get "internal error."

  After restarting my computer, all the virtual machines in workstation that allows you to start now will no longer start.  Currently to get the super useless error message: "Internal error." which is of course totally shameful.

  I uninstalled and reinstalled, tried searching for "cpuidHash" in my registry to reset, which curiously is not there as part of the services, I tried to remove / delete the VMEM and even tried to create a new VM and start it without an operating system and all attempts to start no VM result in the same message.  Also get the same error when trying to boot from VMware Player.

  Key in the log error can be: "E105: PANIC: CHECK bora\vmcore\vmx\main\timeTracker_user.c:238 bugNr = 148722 '.

  Any help on how to get VMware software to service is appreciated - thanks in advance!

  Thank you Darius - had already tried.  It turns out that this specific response of spoonalious solved my problem.  Not sure what caused the problem in the 1st place, to my knowledge, nothing had changed, but after completing these steps and restart services the issue was resolved after much work.  VMware software are extremely fragile and breaks easily it seems:

  New host PC - VM will start is more (internal error - VMWare Workstation 11)

  Thanks to Darius and spoonalious for the position of solution!

• 09/02/2010 Update error, cannot start.

  I have a big problem with the update from last night.

  I am running Vista Home Premium edition and I left the update running last night, this morning, I check my pc and it tells me that windows startup failed.  I'm trying to start in normal mode and it crashes every time.

  I tried to boot into system recovery mode, but it asks me to enter the original disk of Vista to try to solve the problem. When I bought my pc, the package did not include the real disk.  I have to go back to the store to remedy or y at - it a solution?

  Thanks in advance
  L

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• PCMCIA wireless network card is not detected: 1058 error: cannot start service

  Help, please!

  I'm under WXP Pro for over 2 years and I've been connecting to the internet via a pc wireless card in my laptop with no problems PCMCIA slot. Suddenly last week, he started randomly disconnect and reconnect, and now it is gone completely.

  I bought a new WiFi card and still does not work. I checked the Device Manager and driver of cardbus PCMCIA works well as all other devices. The driver for the wireless card and another bound network drivers not start little matter what I try and how many times I try. I tried another laptop and my old card and once again work very well.

  The device driver I try to start have the error

  "Error 1058: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him."

  The card driver is installed, but not from, it is as if the laptop cannot detect or see the card in the slot

  Please help; I have difficulties to find someone with the same problem after a week of searching the Web.

  Hello

  This problem may occur if the service is disabled or if the service is disabled for the hardware profile you are currently using.
  To activate the service follow these steps:

  1. click on start, point to programs, point to administrative tools and then click Services.
  2. double-click on the service that is not started.
  3. click on the tab to open a session.
  4. check that the service has not been disabled for the hardware profile that you are using. If so, click Activate.
  5. click on the general tab, verify that the service has not been disabled in the Startup Type box. If Yes, click Automatic to have it start when you start the computer.

  What is described here in the article MS knowledge base
  http://support.Microsoft.com/kb/241584