Cannot start Journ.E Touch

Similar Questions

• Cannot start my ipod touch 2G, need help?

  I got the ipod touch 2 G Sin 2014.

  But I was tired by dec.15.

  And now I need to start my ipod

  so, when I put in charge for the first time the low battery symbol came and I leave him in charge.

  I downloaded the latest version of itunes in my computer laptop windows 7.

  After 1-2 hours when I tried to start my ipod back and I hold the power button, but nothing showed up.

  then I tried to connect with the computer, but still nothing, not even a single pop up unknown device.

  I googled every 2-3 hours and done with every possible access.

  My all ports are good working and my cable too!

  but now I can not turn on my ipod.

  Please help me...

  Hello

  You can try to restart the iPod. While trendy sound, hold the power button and the home simultaneously for 10 seconds. The iPod should restart and start up again.

  Good luck!

• Journ.e Touch suspended on the start screen

  My Journ.e Touch just doesn't start. She is new and fully charged (about a month, rarely used). When I turn on the Tablet, it does not start the operating system, it can stay on the start screen for hours, or until the battery is flat. I can't stop, and even make the reset does not solve the problem. It worked fine before, also, today I managed to once, but now - nothing...
  What can I do?
  Thank you in advance.

  Hello thomas.b,

  You should do a firmware update to version E1.1.00.

  After that, the problem should be solved.

  How to, and a link where you can download the update here:
  http://APS2.toshiba-tro.de/KB0/OPT0502VS0000R01.htm

  Best regards

• Journ.e Touch - need USB drivers

  Can you give me a link to download the USB drivers for toshiba journ.e touch?

  Hi mate

  I think you mixed up something tactile E travel is a plug-and-play device and there is no need of USB drivers.

  You can use a USB cable (available separately) to connect your DAY. E TOUCH to a computer for the file transfer.

  1. when the JOURN. E TOUCH is on, insert one end of the USB cable into the mini USB port on your DAY. E TOUCH.

  2. Insert the other end of the USB cable into the USB port on the computer.

  3. the screen connect to PC is displayed on your DAY. E TOUCH.

  4. once the connection is ready, the computer will recognize the DAY. E TOUCH as a mass storage, displayed as "JourneTouch" in your computer.
  Now you can start transferring files between the computer and the JOURN. E TOUCH.

  5. double-click on "JourneTouch" in your computer. Records music, photos and videos appear under "JourneTouch".
  -In the Photo folder, you will find the records Picasa and Flickr, if you use these applications to upload photos.

  6. you can copy files from or to your DAY. E TOUCH.

  * NOTE *.
  You can access the files in the internal memory of your DAY. E TOUCH from the computer. You can't access the files in the inserted SD card or USB to the computer.

• Mac cannot start after el captain

  Cannot start after updating mac

  Safe Mode boot removes the system caches that can help after an OS X day or level.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Try safe mode if your Mac does not end commissioning

• Firefox is exhausted before but cannot start more

  Firefox is exhausted before but cannot start more.
  I tried the solutions, but it does not work

  Large. Glad to know you have the root of the problem, and thanks for posting back.

  Usually, we suggest that when checking for malware several tools to serve because no single tool is looking for or find everything. The standard help article

  • Fix Firefox problems caused by malicious software

• Cannot start Firefox, crash even in Crash Reporter. Not be able to start in safe mode either.

  Cannot start Firefox. He goes to Mozilla Crash Reporter every time. I can't even start it Safe Mode.
  I tried to uninstall and delete all the files related to Mozilla Firefox in & AppData & and each base registry with RegEdit.

  I have run, or at least try, on a system with Windows 7 64 bit, 8 GB RAM, 314.22 driver for Nvidia GeForce GPU and a CPU Intel Core i5 2500 k CPU.

  Little help would be nice.

  Hi deliubogdan

  Try to remove the extension DataMngr (Datamngr.dll)

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • [816181/questions/816181]

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender: Home Page:
    http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  So what measures through 'install '?

• Tecra S5 - adapter to display cannot start - Code 10

  Hello

  I have a problem with my laptop (Tecra S5 series).
  Every time when I start or restart my laptop, the screen moves too slowly, it has yellow bands and sometimes is flashing.
  When I open the Device Manager I see the graphics card (NVIDIA Quadro NVS 130 M) with yellow circuit with a brand extension. When I go inside it is said: the device cannot start. Code 10.

  Then I have to go Safe Mode, uninstall the drivers for NVIDIA Quadro NVS 130 M, reinstall and restart. I noticed that when this video adapter is OK, so I don't have problems with my laptop screen.

  Can someone help me?

  What operating system do you use?
  I put t know since when you have this problem, but if this happens again and again I recommend you to install original OS that you got with your laptop. It contains the original, including the display driver drivers, and something like that should not happen.

• Facebook application for Toshiba Journ.E touch

  Hi guys

  (1) my Toshiba - DAY tablet. E TOUCH doesn't have the application for facebook of begging, when I bought it.
  I try to find the virtual store and I have noy could find it.
  Can you please help me where I can find this application?

  (2) what video format (wma etc.) should I use to see my videos in full screen of analysis, because I see them ever smaller.

  Thank you

  Takis

  (1) the question is: this Facebook application is available in store?
  If you can't find it in the online store, then it is not exist.

  (2) Journ.E touch supports a display resolution of 800 x 600 pix and AVI, Mpeg4, 3GP, FLV, WMV video formats are supported

• Cannot start the satellite M35X

  Hi all.

  Cannot start my Satellite.
  When I push the power button, it turns on, the blue led is ok but the HDD led blinks 1 or 2 times or it happened when it is not clear at all and put the laptop off, but the power button remains lit.

  However, from time to time, it starts up, shuts down load the XP but after 1 minute.

  I have reinstaled recently the WinXP, and I did a bios update. Before that, the laptop didn't have this behavior, however, the XP raported me that the hard drive is faulty.
  I figured it is something related to the HARD drive.
  What should I do?

  How can I be sure that the HARD disk is wrong?

  Hi mate,

  If your HARD drive has bad sectors, you must exchange it ;)

  For example before doing this, you can check for bad sectors using specific diagnostic tools HDD as Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Here, you can download an image file to create a boot disk. Then boot from it and to start the test, it is quite easy! ;)

  If your HARD drive is faulty, this tool should recognize this.

• Envy 17-j120us: high definition Audio Device, Code 10 device cannot start, yellow triangle

  My IDT audio works fine and its works my laptop well, but when I curls upward from my laptop to my TV via a HDMI cable, I output my laptop displays on my TV but no sound from my laptop on my TV came out. I think the problem is because there is something wrong with my high definition Audio Device. It has a yellow triangle next to him with a! in the middle of the yellow triangle in the Manager of devices under sound, video and game controllers. And when I click on properties on the high definition Audio Device, it says: "this device cannot start. (Code 10) {Operation failed} The requested operation failed. Any help would be great. Is CLEAN Windows 10 installed on a NEW HARD DISK. I HAVE NOT upgraded, windows 10 was clean installed from a disc.

  See if it works...

  Download and install this free utility for files.  The 2nd listed file is 64-bit.

  http://www.7-zip.org/

  Then download and save, but do not run the graphics driver Intel W10 from the support page of your laptop.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72370.exe

  Right-click on the file of the Intel graphics driver you just downloaded and select 7 - zip from the list of options.

  Have 7-zip extract of: and let it extract the file in the file name (sp72370).

  Go to Device Manager and click on the audio device HD of the problem.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.

• Portege Z930 cannot start with installed RAM module

  My laptop Toshiba Portege Z930-108 has stopped booting with any module of RAM installed in the support.

  If I remove RAM module, laptop computer starts and works fine, but if I install any module of RAM (4 GB 1600 original or a new 4 1600 CL9 or 1600 8 CL11) the computer cannot start.

  The screen stays black and power led flashing two green and two orange and a few seconds later, 3G indicator also on blue.

  This is the only problem I have with this computer, but it's strange.

  I updated the BIOS to the latest version and the problem is not resolved.

  I tried to reset the hardware (http://aps2.toshiba-tro.de/kb0/TSB3B03J90000R01.htm), also I tried to reset the equipment with power button 30 seconds without battery but button without success.

  Any idea on this problem of strage?

  Kind regards
  Lito.

  I guess you used bad RAM or not fully compatible modules.
  It's the only plausible explanation.

  I recommend you to order the RAM modules recommended by Toshiba that are:

  4 GB DDR3 - 1600 PA5037U-1M4G

  2 GB DDR3 - 1600 PA5037U-1M2G

• Portege Z830 - Infineon TPM device cannot start (code 10)

  Hello

  I have a new Z830 - 10F, and I am trying to configure Bitlocker (windows 7 - 64 bit).
  I have a problem with the Infineon TPM device. (Driver version 2.1.1.0)
  This device cannot start (code 10).

  I downloaded all the drivers from Toshiba, but it does not work.

  Any idea?

  Thank you.

  Hello

  The TPM is optional and not equipped Portege Z830-10F unit a module TPM.

  Welcome them

• Toshiba Journ.e Touch - full screen does not work

  I have two questions. :)

  1. when I play ANY video, it won't go full screen. I couldn't find the way to do it. Player default it runs successfully, after a few seconds the command for the game, break etc goes, there is only one image on the left, but he won't go full screen. And there is no button for this.

  2. I've seen in the official presentation of this product that there is a facebook application in store, but he's not here. In the store, I can download only 10-15 applications. Is that all, or there is another way, how can I get more applications? More importantly from facebook. :)

  Thank you vary much. :)

  All the best,
  Jovana

  > 2. I saw in the presentation of this product, there is a facebook application in store, but he's not here. In the store, I can download only 10-15 applications. Is that all, or there is another way, how can I get more applications? More importantly from facebook

  AFAIK the Journ.E touch run the Windows CE 6.0 system and facebook app isn't available for these OS.

  > 1. When I play ANY video, it won't go full screen. I couldn't find the way to do it. Player default it runs successfully, after a few seconds the command for the game, break etc goes, there is only one image on the left, but he won't go full screen. And there is no button for this.

  Journ.E touch supported video format: avi, 3GP, FLV, Mpeg4. H.264, WMV
  The Tablet has a touchscreen of 800 x 480 pixels and can display 1080 p video scaling on this display or pump out at full resolution to an external monitor via HDMI port