Cannot start log_monitor.exe without installation install Thinapp

Similar Questions

• Cannot start Setup.exe of Oracle installation

  If I copy the installation of HD DVD Oracle files and try to launch "Setup.exe" from the HD, it fails. Permissions for files
  are set correctly both attributes. If I start "Setup.exe" to install DVD, I can do the full install.
  I've done Oracle facilities several times via the HD copy and make the installation and those who have worked well, but
  not in this case?
  Thanks for your help Oscar

  Go to the installation folder and then double click on Yes. Setup.exe does not work sometimes.

  Concerning
  Rajesh

• Aspire E3 - 112 cannot start after win10 own attempt installed

  The installation is wrong. He went right through the extract process and install OK but then just went along in a loop to keep reinstalling the usb drive. I changed the bios by promoting usb hdd over windows Boot Manager (in uefi). So I removed the USB drive and restored the order of the bios. But now, when I boot, I get an error window saying "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows click OK to restart the computer, and then restart the installation. "It makes no difference if I close the window or click OK, it goes through the same circle.

  Help!

  Thanks for the reply. I tried that. In the end, I found that the solution was to wait for the beginning of the (umpteenth) reinstall the process and then press the power button for a few seconds until the machine stops. Then I powered up while pressing the F2 and is gone in the bios where I restored the original and the machine parameters and then started in the new clean install.

  Unless the OS is nuked, how to perform a clean install is using the settings > update & security > Recovery > restart now and use the boot from usb option. And leave the bios alone.

• Cannot start Vista somehow without BSOD, including Mode without fail & last known--IRQL_NOT_LESS_OR_EQUAL

  I don't know exactly what the cause of the problem, but I have a feeling that it is a driver problem. I don't know why the problem started, I've had a laptop where the monitor came out on this subject so I photographed the hard to VMware, I never started an operating system that has not been installed in native mode via vmware before so I thought there may be errors.

  The first time it booted up it starts normally, the Windows Activation came, although I do not know why I have reactivated, and he says that it needs to restart. I restarted and it said it was installing 10 updates - after the updates done, it restarted and then any startup mode, I choose to get exactly the same problem blue screen of death.

  I searched for hours a reply - all, I access the Startup Repair tool command prompt. I think it's a driver issue, but I don't know how to uninstall the drivers from the command prompt.

  It is vital that I have fix without restoring the system or in a Format that I need all programs intact with their original settings. I probably just need to uninstall all the drivers and install them again.

  Hello

  Best to check also with VMware Support and forums.

  -----------------------------------------------------------------

  There are two Bug_Checks with IRQL_NOT_LESS_OR_EQUAL then its best to specify the BCCode or
  Stop Code. Both are 0 a 0x0000000A and D1 0x000000D1.

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 methods (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  ----------------------------------------------------------

  Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
  just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
  The video driver or something affecting it would be questionable.

  Make sure that BIOS driver low-level chipset and drivers are all updated by checking manually
  system manufacturer and device manufacturers sites.

  -----------------------------------

  BCCode: 0a 0x0000000A

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  Comments

  Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

  BCCode: 0a 0x0000000A<-- read="" this="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  ----------------------------------------------------------------------------------------------------------

  If there is any RAID drivers they are very suspicious and/or drivers problems are very real prospects.
  Other possibilities are video and other drivers. Refer to the section of driver in my credits
  methods of troubleshooting blue screen below. BIOS, drivers low level chipset, memory and
  antispyway/antivirus/security programs can also cause this. Check the resolution of problems and when
  you get the pilot section refer to generic methods in next message and return to
  the troubleshooter if necessary.

  BCCode: D1 0x000000D1

  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

  BCCode: d1 0x000000d1<-- read="" this="">
  * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen
  of death "crashes and displays the information about all crashes in one
  Table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Home CD not active - WinXP virtual system - cannot start from the CD to install WinXP

  I'm new to this product, although I used vmware customer a while back on a Windows System.

  I have a P4-24 base system. G Intel chipset with new CD/DVD IDE burners/readers.

  These are both on IDE1 and nothing is on IDE2

  I have two drives SATA WD120G who are the active disks.

  ESXi 3.5 installed OK and I can create a virtual machine using the VMware Infracstructure customer.

  When I start the client machine I have CD/DVD host will start the Windows XP CD, but it fails

  to do so. I tried the option to use the client CD started the power upward, but so far I can not install the WinXP operating system

  on the virtual machine. I even unplugged of the DVD to limit the scope, but that made no difference.

  It's almost as if the virtual machine cannot find the CD/DVD drive.

  Can someone suggest a resolution?

  

  I never use physical media (do not say that it does not work) - I use the ISO. I find in situations like yours is to mount the iso for the virtual machine outside the parameters of the virtual machine - simplest method, you will see an option to connect to cd/dvd in the menu in the VI client.

  Another thing - you will need to connect a flp buslogic image to a floppy drive so that the XP VM can see the buslogic controller (so you can see the hard drive) for installation of the operating system.

  http://virtrix.blogspot.com/2007/09/vmware-installing-windows-xp-on-esx.html - this link also has a buslogic.

  If you find that you don't have enough time to interact with the menu of the loader boot - set a delay at startup in the settings of the virtual machine to 5000ms - this will give you 5 seconds.

  I hope this helps.

• Satellite C55 - C - 1 M 0 - cannot start Windows after the installation of the Dual Boot

  After I installed Ubuntu, when I try to start Windows, the process stops and says that there is a mistake: NTFS_FILE_SYSTEM. But I can't run Ubuntu without problem.

  Is there any special step before installing a Dual Boot with Ubuntu system?

  My laptop is a Satellite C55 - C - 1 M 0.

  Thank you. Kind regards.

  I guess the problem is due to changes in the size of the partition. I found a few questions about google with a ubuntu - NTFS_FILE_SYSTEM query. Maybe you should take a look https://www.google.fr/search?q=ubunt...sm=93&ie=UTF-8

• Cannot start Windows after trying to install the Vista SP2

  I just tried to install Vista SP2 and now whenever I try to turn on the cpu it gives me a blue screen and restarts. It does allow me to start in SafeMode either. In addition, it seems to be impossible to find my restore points. I was able to stop the screen using the F8 menu and it gives me this error on the blue screen

  STOP: 0X0000007E (0XC0000005, 0X81C223BB, 0X803998F4, 0X803995F0)

  For some reason, when I go to the cmd prompt to advanced troubleshooting guide, I can do, he says that I am the X and not the C drive, if that has something to do with my restore points does not.

  I tried to get the menu of the restoration on C manually through C:\windows\system32\restore\, but nothing was there.

  Any help would be appreciated. I will not lose rather all my data in a reformat.

  Thank you
  Matt

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you installed SP2?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  
  0X0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  A system thread threw an exception who did not catch the error handler. There are several individual causes for this problem, including the hardware incompatibility, service driver or defective peripheral system or software problems. Check (EventVwr.msc) event viewer for more information.
  
  Source: http://aumha.org/a/stop.php#0x7e

  
  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:
  
  0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred. [emphasis]
  
  Source & more: http://msdn.microsoft.com/en-gb/library/ms795746.aspx

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• cannot start the computer without disconnecting the graphics card

  I'm having a strange problem.

  Recently my computer has started doing something funny.  If I choose restart, or stop and start the computer too fast, it does not start.  He posts about 3 times then won't start.  If I unplug the graphic card and let the beep from the motherboard error on the code, and then close it, plug it back and it starts.  It's really weird and I don't know where to start troubleshooting.

  Here are my system specs:

  OS: Vista 64

  Processor: Intel Core 2 Quad Q6600 @ 2.40 GHz (4CPU), "2.4 GHz

  Motherboard: Biostar T-Power I45

  Graphics card: NVidia GE Force 9800 GX2

  Any help would be great because I just had to reinstall windows, and there restart every time I install a program, and with this error it takes me about 10 minutes to start again.

  Thank you!

  Hello

  You've got a video that can interfere? Settings/Setup (BIOS/CMOS) often as F2
  you start so watch the screen for the key. Disable the integrated video if activated.

  If it does not help it sounds like you need technical support in a real store of the computer (not leeks and)
  Displays a BestBuy or some other BigBox store) or system manufacturer support.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Z820 - BIOS updated to v2.55 - cannot start or install the installation of Windows 7 (UEFI) disc

  Hello

  I have serious problems with the boot and install Windows 7 on my Z820.

  My problems started with Windows Boot Manager, throwing an error in the boot, saying that "the Windows Boot Configuration data file is missing required information". In the end, I decided to do a full clean reinstall of WIndows. However, I was unable to get Windows 7 installed. I was able to boot the disc at retail of Windows 7 64-bit UEFI mode, but he had problems with the installation. Each attempt ended with an error stating that 'Windows could not update the configuration to start the computer. Installation cannot continue. ».

  It was the BIOS v2.08. Intel 520 (240 GB) SSD as boot drive and 2 TB SATA HARD drive as data disc on the ports of controller LSI 2308 0 and 1 respectively. 2 DVD players on Intel AHCI ports.

  I decided to take a different path.

  I removed my data HDD and a DVD of the Z820 player. I put my SSD (which will become the startup disk) and a DVD player on both ports to AHCI.

  I've updated the Z820 BIOS with the latest version (v2.55, February 13, 2013), did a reset CMOS (machined cable disconnected) and reset the BIOS to factory default settings. Then, I put 'OptionROM mass storage' mode EFI and the storage on AHCI mode.

  Now, when I put in retail Windows 7 SP1 64-bit installation DVD and select the drive of DVD (UEFI) to start, I get just a flashing dash. I noticed also that some fans begin immediately turn faster.

  To summarize:

  I am unable to boot Windows 7 SP1 64 bit DVD installation detail at all and therefore impossible to install Windows 7.

  Configuration of the system (as in the last installation attempt):

  -Dual Xeon E5-2680

  -32 GB OF RAM DDR3-1600 PC3-12800

  -240 GB SSD IDE AHCI Intel oucederomsurlesecondport 520

  DVD player - Harbour AHCI

  -NVIDIA Quadro 4000

  -BIOS v2.55 (OptionROM in EFI, Secure Boot disabled mode mass storage)

  I'm getting desperate... ;-)

  Should I try reseating the RAM modules? Remove some RAM? Connect my monitor differently (currently DVI to VGA)? Replace the graphics card?

  Kind regards

  Dries

  In the safety device is the LSI controller set to device available and under device options is Donwload ROM option enabled.
  
  If they are both correct so I would say that your MB doesn't have, I got 3 failure already on my 6 systems! Not been more reliable work stations to this day.
  
  For intergatting search device & patches for WinToolKit, I can share my images because they contain information about the company & registered software.

• Satellite A200 - once installation of Karspersky cannot start the CAM software

  Guys I need help...

  I have download the Karspersky antivirus 2009 and I install on my Toshiba Satellite A200-gs1 psaece
  He acknowledged the cec_main.exe as virus and block...
  I put it in the exclusion list, it does not continue the works, and when I started my laptop it said «cannot run cec_main.exe...» ».

  I remove the program and install it again I ve put again to the exclusion list.
  Now it's the turn of say on your camera when I m running my cam program.
  I put t know what I should do...

  Here is the cure:
  Probably a good idea to go to Toshiba and download the latest version of the software for the camera to your computer. Do not open this software. Go to the control panel and remove the existing camera Assistant software. Open the Kaspersky software and click settings then click threats and exclusions under the Options tab. Click on the zone of confidence. Click on approved Applications. If CEC_MAIN.exe exists, delete it. Restart the computer.
  May be a good idea to delete your internet cable because we do a right-click on the Kaspersky shortcut and click PROTECTION of PAUSE. This is a must! Probably best to set for a 10 minute break. Close this menu and then open Kaspersky. Go to settings > threats and Exclusions > Trusted Zones > objects > Add + > and type in manually or copy and paste the following text exactly as shown below:

  C:\Program Camera Assistant Software for Toshiba\CEC_MAIN.exe

  exclusionary rules, to allow CEC_Main.exe to be a trusted application. Then reinstall the software assistant camera. Kaspersky should always be in pause mode, but will let you know maybe CEC_MAIN.exe to contain a virus.
  Ignore, but look for the option on this same screen that will allow you to add this as a trusted application. It's the key to this... Kaspersky should be paused during the reinstallation of the software. Once you tell Kaspersky to add this as a trusted application, your installation should be completed. REBOOT and the problem is over.

• Tecra M9 - TPSMain.exe cannot start because CpePerf.dll was not found

  Hi and help,

  searched the Web and found other discussions of the forum with similar questions.
  Tried all suggestions, nothing worked. I'm not very good on the computer but you can find my way. In any case...

  After connection messge pop messages - up in succession, similar to: TPSMain.exe cannot start because CpePerf.dll was not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found

  Computer works very well but Power Saver start is not automatic and can't select it from the Panel... "" Toshiba power saver does not work. "
  so select the power options... "could not start because the CpuPerf.dll is not running.
  Did all the research on the net and followed all the tips... i.e. unistall saving in safe mode, uninstall toshiba common utility can uninstall fatal error 0x7e

  Then download Ccleaner, inspections, uninstall with Ccleaner same fatal error.
  In support of Toshiba and tried to install Power Saver... same problem will not install.

  Thus help help help if possible.
  Computer works well but popping up messages are annoying and I'd love to sleep to extend battery.

  Tried the system restore, even though I doubt that it affects the files... Another problem "cannot complete system restore"... tried this several times and cannot restore the system either... What is happening?

  any help please
  Tim

  Hello

  I think you can solve this problem, recover the laptop.
  But that would mean that the whole HARD disk should be formatted and would be installed everything again, I put t know if this is an option for you

  It turns out that something will not with the Toshiba Power Saver installed and, consequently, the popup message.
  Usually new installation of GST should help. But it was not and I m wondering why

  Maybe this is s question really an OS since system restore help (to the previous state) didn t

  He s strange question right now I can suggest only a new recovery

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems installing the Apple updates. System error program cannot start because MSVCR80.dll is missing on your computer. "

  Original title: I am a computer newbie, could someone explain/direct me?  Many thanks, Mark

  Recently, I received an Apple update normal I-tunes.  Have done a little before, never with a problem.  This time, it seemed that everything was fine, then at the end (when expects a message "successfully installed", I received an error box with this: APS Daemon.exe - error system, the program cannot start because MSVCR80.dll is missing on your computer.)  Try reinstalling the program to fix this problem. "Well, since nothing else seems to work (or helping) and my music files have been backed up, I uninstalled I-Tunes successfully, then attempted to re - install.  I had to download the installation of Apple, which was very good. Once again, everything seemed to go smoothly, installation, etc. until it got to the point when he said "Marketing Services".  Then, as before - everything stopped and jumped up to the exact same APS Daemon.exe - error box system (with the same message) referencing MSVCR80.dll once again, saying that it is missing and try to reinstall the program.  From now on, I don't know exactly what that means (I know, I know) or if it's something someone like I could fix (or even try), or if I should just run down to my local computer store?   Never had any problems with the Apple or Windows updates before this one.

  Thank you to everyone how wants take a few minutes and help a person who has started working on computers far too late in life!
  Sincerely, mark Hawk

  Hello

  Uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  ___________________________________________________

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm 

  __________________________________________________

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• HP Pavillion Model 17-f1210nr: cannot start correctly, Accelerometer.exe mfc120u.dll missing

  I'm not sure of the product is correct because the characters are very tiny and difficult to read.  I should also mention that this lapto came with Win8.1 and I had cleared and installed Win7.

  Very early in the morning of 12 November, I turned on my laptop for the first time in a month.  AMD Radeon wanted to download and install updates, something that I have authorized.  Since then, every time you start, I get the following error popup and it remains above it all, until I click OK.

  AccelerometerSt.exe - Application error

  The application failed to start properly (0xc00007b). Click OK to close the application.

  Exe is located in C:\Program Files (x 86) \Hewlett-Packard\HP DriveGuard\AccelerometerSt.exe 3D

  If I put this in a bar in windows Explorer and press the Enter key, I get a stays high Popup in the error page that says the following

  AccelorometerSt.exe - system error

  The program cannot start because mfc120u.dll is missing on your computer.  Try reinstalling the program to fix this problem.

  I'm not a computer scientist, but I know what he does.  This is what detects if my phone fell and snaps hard disk drive arm in its place before impact to avoid a head crash, which would destroy the hard drive of rest

  I need to know the exact page where I can go to download the installation file to resolve the problem.

  Hello

  Reinstall the player 3D guard can help:

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75979.exe

  Kind regards

• Portege Z930 cannot start with installed RAM module

  My laptop Toshiba Portege Z930-108 has stopped booting with any module of RAM installed in the support.

  If I remove RAM module, laptop computer starts and works fine, but if I install any module of RAM (4 GB 1600 original or a new 4 1600 CL9 or 1600 8 CL11) the computer cannot start.

  The screen stays black and power led flashing two green and two orange and a few seconds later, 3G indicator also on blue.

  This is the only problem I have with this computer, but it's strange.

  I updated the BIOS to the latest version and the problem is not resolved.

  I tried to reset the hardware (http://aps2.toshiba-tro.de/kb0/TSB3B03J90000R01.htm), also I tried to reset the equipment with power button 30 seconds without battery but button without success.

  Any idea on this problem of strage?

  Kind regards
  Lito.

  I guess you used bad RAM or not fully compatible modules.
  It's the only plausible explanation.

  I recommend you to order the RAM modules recommended by Toshiba that are:

  4 GB DDR3 - 1600 PA5037U-1M4G

  2 GB DDR3 - 1600 PA5037U-1M2G