Cannot start the Application Oracle SOA suite Server

Similar Questions

• Cannot start the application - error code 8

  I'm running one of my own apps and I get this message:

  "Cannot start the application - error code 8.

  What is the error code 8? Where can I find a list of all error codes?

  Thanks in advance

  If you get error 8 or 13, and that everything you did is OK for this:

  -Uninstall all versions of your application

  -Restart the playbook

  -Install and run again

• Cannot start the application... Error code 13

  I installed my real application in device playbook by using the debugging token. Request worked fine.but nw am not able to open the application. "Cannot start the application...". Error code 13 shows this error message while trying to open the application... .i don't know what to do...! Help, please...!

  Thank you

  I had solved it. It was the problem of token bug. It was expired while I have created a new and run the application .nw, it works very well.

• Cannot start the application in the Server Instance

  I use jDeveloper:
  
  Oracle JDeveloper 11g 11.1.1.0.0
  Studio Edition Version 11.1.1.0.0
  Build JDEVADF_MAIN. BOXER_GENERIC_081002.2127.5156
  Copyright © 1997, 2008 Oracle. All rights reserved.
  The IDE version: 11.1.1.0.31.51.56
  Product ID: oracle.jdeveloper
  Product version: 11.1.1.0.31.51.56
  
  Using the tutorial, I was able to create and test my WebService "HelloService". Then, I created a page of HelloClientADF. When I tried to deploy it to the Web service by default, I get this error:
  
  Redeploy the Application...
  < 19 February 2009 00:46:36 this > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the Web service application is not versioned. >
  < 19 February 2009 00:46:39 this > < error > < HTTP > < BEA-101216 > < Servlet: 'HelloServicePort' failed by preloading at startup in a Web application: "WebService-Annotation-context-root".
  java.lang.NullPointerException
  at weblogic.wsee.wsdl.WsdlTypes.collectNamespaces(WsdlTypes.java:213)
  at weblogic.wsee.wsdl.WsdlTypes.collectNamespaces(WsdlTypes.java:229)
  at weblogic.wsee.wsdl.WsdlTypes.collectNamespaces(WsdlTypes.java:229)
  at weblogic.wsee.wsdl.WsdlTypes.parse(WsdlTypes.java:151)
  at weblogic.wsee.wsdl.WsdlDefinitions.parseChild (WsdlDefinitions.java:520
  
  Now, I'm not yet able to test the Web Service as it fails with the same error.
  
  Is there any solution for this? Please give me your feedback. Thank you.

  There is a bug in JDev 11 g that prevents you to run a single application that has a Web Services and the ADF page.
  The solution is to create an application that has Web service - and run it.
  Create another application with the parts of the ADF, and then run it.

  See: http://www.oracle.com/technology/products/jdev/htdocs/11/knownissues.html#wsdl1

  Published by: Shay Shmeltzer, February 19, 2009 16:49

• Cannot open the Application Oracle (HTML) Homepage

  Hallo,

  I can't open the homepage of Oracle (HTML) Application for a specific user. After that I logged from the login page it open directly the forms (Inventory Module).

  But it is possible to open the HTML pages of forms Navigator.

  Please help me solve this problem.

  Apps - 12.0.6

  Db - Oracle Database 10 g Enterprise Edition Release 10.2.0.3.0 - 64 bit

  OS - Linux 5.4

  Thank you

  Please see (on "Starting Applications Page" profile option [729375.1 ID]), section "function disabled".

  Thank you

  Hussein

• Cannot start the application because (dacCom) is not properly installed on XP

  When I'm trying to click on component above services error I m get.

  Pls help me...

  Hi laetitia Ganji,.
   
   
  -Were you able to start Services previously with no problems?
   
  -Are you connected to any network domain?
   
  If so, contact the system admin of the respective service.
   
  If not, follow these steps and check if it helps you fix the problem:
   

  a. Click Start. Click run. Type cmd and press ENTER.

  b. at the command prompt run "msdtc - uninstall" without the quotes. This removes the MSDTC service control Panel Services and the hive of service associated with the CIDs and CID.

  c. at the command prompt run "msdtc - install" without the quotes. This will reinstall the MSDTC service and registry hives above.

• BlackBerry Smartphones cannot start the application Contact Cleaner

  App Contact Cleaner installed on my 9780. When you press the button, a message appears: "select clean up in the start menu." I don't know how to do this, it does not work.

  You press your Menu button (the one with the BlackBerry logo, just to the left of the trackpad) and find the "Clean" function

• Cannot start the application of space of

  My Explorer improved to 10.0

  Since then I try lanch request and a new window opens and nothing stays gray...

  EAS is connected.

  Thank you

  Yes you can downgrade to aid

  Start / programs and features / and select the program version you want to uninstall.

  I have uninstall E10 so I am runnig E9 and it works.

  After that I manually configured the windows upgrade.

  Thank you

• DPS 2015 cannot launch the application for testing in my iphone via itunes

  HI everyone the recruit again! Cannot start the application for testing in my iphone via itunes version 12.2.2 IOS 8.4 6! the test application is displayed on the screen of my iphone but there is installation and gray forever?

  Any ideas? perhaps update iphone with a new 8.4.1 version?  Thanks to everyone in advance!

  https://helpx.Adobe.com/Digital-Publishing-Suite/KB/unable-install-developer-IPA.html

  Neil

• The upgrade to Premiere Pro 2015.1 I cannot open the application

  Hello

  Today, I upgraded my first cc pro 2015 to 2015.1 version.
  Unfortunately, now I can't launch the app, and I get this error.
  «Cannot start the application properly (0xc000001d).» Please change OK to close the application.
  On the net I found only this solution on reddit:

  Could not start the first pro cc 2015 (0xc000001d) error: first

  but all my attempts are omitted.

  Please, can anyone help me?
  Best.

  Hi Mike Maxxi,.

  For a fix, update for first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Oracle SOA Suite 11 g for the payload of the Composite instance

  Hello! Im trying to run code from guide Oracle SOA Suite 11 g - get the payload instance of Composite - Part2

  IM added to the code to display the string after transformation:

  import java.io.StringWriter;

  import java.sql. *;

  import java.util.Hashtable;

  Javax.naming import. *;

  Javax.xml.transform import. *;

  Import javax.xml.transform.dom.DOMSource;

  Import javax.xml.transform.stream.StreamResult;

  Oracle.xml.binxml import. *;

  Oracle.xml.parser.v2 import. *;

  Import oracle.xml.scalable.InfosetReader;

  public class GetPayload {}

  public static connection getConnection() bird Exception {}

  Context ctx = null;

  Hashtable ht = new Hashtable();

  HT.put (Context.INITIAL_CONTEXT_FACTORY, "WebLogic.JNDI.WLInitialContextFactory");

  HT.put (Context.PROVIDER_URL, "t3://test.ru:8001");

  CTX = new InitialContext (ht);

  javax.sql.DataSource ds = (javax.sql.DataSource)ctx.lookup("jdbc/SOADataSource");

  Return ds.getConnection ();

  }

  public static String getPayload() {}

  Statement stmt = null;

  Fitting out = null;

  ResultSet rs = null;

  String query =

  'select xmldoc.document DOC' + 'from xmldoc, instance_payload inspay, composite_instance cmpins xml_document ' +.

  "where xmldoc.document_id = inspay.payload_key"+ ".

  ' and inspay.instance_id = cmpins.id "+".

  ' and inspay.instance_type = 'composite' "+".

  "and doc. DOCUMENT_TYPE = 2 "+"

  'and inspay.instance_id = 1933802 ";

  String payload = "";

  XMLDocument doc = null;

  try {}

  connection = getConnection().

  stmt = connection.createStatement ();

  RS = stmt.executeQuery (query);

  XMLDOMImplementation xmldomimpl = new XMLDOMImplementation();

  While (RS. Next {}

  BinXMLProcessor xmlprocessor = BinXMLProcessorFactory.createProcessor ();

  XMLStream BinXMLStream = xmlprocessor.createBinXMLStream (rs.getBlob ("DOC"));

  BinXMLDecoder xmldecoder = xmlstream.getDecoder ();

  XmlReader InfosetReader = xmldecoder.getReader ();

  doc = (XMLDocument) xmldomimpl.createDocument (xmlreader);

  TransformerFactory tf = TransformerFactory.newInstance ();

  Transformer transformer;

  transformer = tf.newTransformer ();

  transformer.setOutputProperty (OutputKeys.OMIT_XML_DECLARATION, "yes");

  StringWriter writer = new StringWriter();

  transform. Transform (new DOMSource (doc), new StreamResult (writer));

  payload = m:System.NET.SocketAddress.ToString () .replaceAll () writer.getBuffer ("<", "& lt;"). replaceAll (">","& ;"); gt)

  }

  } catch (Exception e) {}

  e.printStackTrace ();

  } {Finally

  try {}

  If (rs! = null)

  RS. Close();

  If (stmt! = null)

  stmt. Close();

  If (connection! = null)

  Connection.Close;

  } catch (Exception e) {}

  }

  }

  return the payload;

  }

  Public Shared Sub main (String [] args) {}

  System.out.println (getPayload ());

  }

  }

  To project Im added a few jar:

  xmlparserv2.jar of middleware/oracle_common/modules/oracle.xdk_11.1.0

  wlclient.jar of /oracle/middleware/wlserver_10.3/server/lib

  When Im im project making errorrunning:

  D:\Oracle\Java\jdk1.6.0_45\bin\javaw.exe-serveur - classpath C:\JDeveloper\mywork\ParseXMLbin\.adf; C:\JDeveloper\mywork\ParseXMLbin\GetPayload\classes;D:\libs\oracle.xdk_11.1.0\xmlparserv2.jar;D:\libs\wlclient.jar-Djavax.net.ssl.trustStore=D:\Oracle\Middleware1\wlserver_10.3\server\lib\DemoTrust.jks GetPayload

  java.lang.ClassCastException: java.lang.Object incompatible with java.io.Serializable

  at weblogic.iiop.IIOPOutputStream.writeAny(IIOPOutputStream.java:1588)

  at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2231)

  at weblogic.utils.io.ObjectStreamClass.writeFields(ObjectStreamClass.java:414)

  at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:235)

  at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:225)

  at weblogic.corba.utils.ValueHandlerImpl.writeValue(ValueHandlerImpl.java:182)

  at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:1963)

  at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:2001)

  at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2266)

  at weblogic.jdbc.common.internal.RmiDataSource_WLSkel.invoke (unknown Source)

  at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)

  at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)

  to weblogic.rmi.internal.BasicServerRef$ 1.run(BasicServerRef.java:522)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)

  at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)

  at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  WebLogic journal file /oracle/middleware/user_projects/domains/ECMdomain/servers/soa_server1/logs/soa_server1.log

  # < 17 November 2015 09:44:04 EET > < WARNING > < RMI > < webtst.russvet.ru > < soa_server1 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< ad53144a2e378d05:19b7a705:15101221102:-8000-00000000002ec16c > < 1447746244170 > < BEA-080003 > < RuntimeException thrown by rmi server: weblogic.jdbc.common.internal.RmiDataSource.getConnection)

  java.lang.ClassCastException: java.lang.Object incompatible with java.io.Serializable.

  java.lang.ClassCastException: java.lang.Object incompatible with java.io.Serializable

  at weblogic.iiop.IIOPOutputStream.writeAny(IIOPOutputStream.java:1588)

  at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2231)

  at weblogic.utils.io.ObjectStreamClass.writeFields(ObjectStreamClass.java:414)

  at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:235)

  at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:225)

  at weblogic.corba.utils.ValueHandlerImpl.writeValue(ValueHandlerImpl.java:182)

  at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:1963)

  at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:2001)

  at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2266)

  at weblogic.jdbc.common.internal.RmiDataSource_WLSkel.invoke (unknown Source)

  at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)

  at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)

  to weblogic.rmi.internal.BasicServerRef$ 1.run(BasicServerRef.java:522)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)

  at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)

  at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Could help you find the solution?

  Thanks for the help guys.

  I created wlfullclient.jar and added instead wlclient.jar

  1. go to the server/lib directory.

  CD WL_HOME/server/lib

  2. use the following command to create wlfullclient.jar in server/lib directory:

  java-jar wljarbuilder.jar

  3. you can now copy and group wlfullclient.jar with client applications

  
  

  After that, I got error about not activate remote JDBC. Solution:

  /Oracle/middleware/user_projects/domains/ECMdomain/bin/setDomainEnv.sh

  WLS_JDBC_REMOTE_ENABLED = "-Dweblogic.jdbc.remoteEnabled =true"

  
  

  After these steps, I waited to succeed =) but once again an error:

  java.lang.NoClassDefFoundError: oracle/sql/BfileDBAccess

  Solution: add ojdbc6.jar to the project

  
  

  Now all the perfect job. I hope that this statement will help someone!
  

• Cannot start the database the R12 DR Oracle EBS of RAC 10 g R2 using SRVCTL

  Hello
  
  I've implemented Oracle 10g R2 RAC data DR Guard for main server Oracle 10 g R2 RAC for EBS R12 (12.0.4).
  I followed Note + ' Business Continuity for Oracle Applications Release 12 on Release 10 gr 2 - Single Instance Database and RAC [452056.1 ID]. +.
  After you configure DR DG, I added DR Database to the Configuration of the Cluster. But I'm not able to start the DR Database via SRVCTL. But able to start the DR Database through Sql * more. I have already mentioned Note: + troubleshooting when srvctl cannot start the RAC instance, but sqlplus can start [ID 844272.1] + and tried to solve the problem but without success.
  
  , I opened SR but still, the problem is not resolved. Are there steps I need to do that is not mentioned in Note 452056.1.
  
  Rgds,
  Thiru

  Have you reviewed these docs?

  CRS - 215 srvctl cannot start ASM, listener, %ORACLE_HOME%/bin/ resources RDBMS with error [740319.1 ID]
  Could not start the Instance with Srvctl, no Info in the newspapers of Imon [ID 741212.1]

  Thank you
  Hussein

• Issue by starting the application server.

  I installed Tux 8.1 under windows 2003 on PT 8.48.16.
  
  Whenver I'm trying to start the application server I m getting the error message below.
  
  I had tried all the possible solution given on the support site, but no luck.
  
  Beside that, I also get a pop-up images that say ' an unhandeled win32 exception occurred in tmadmin.exe [3004]. "
  
  
  Can you please give advice about this.
  
  
  ==========
  Error: -.
  
  073656.DCB - STG-APP3! tmloadcf.4048.1592.-2: 24/04/2012: Tuxedo Version 8.1, 32-bit
  
  073656.DCB - STG-APP3! tmloadcf.4048.1592.-2: CMDTUX_CAT:879: INFO: a new file system is created. (size = 1120 blocks of 512 bytes)
  
  073658.DCB - STG-APP3! tmloadcf.4048.1592.-2: CMDTUX_CAT:871: INFO: E:\psoft\PT848\appserv\CRPROD\PSTUXCFG TUXCONFIG file was created
  
  073705.DCB - STG-APP3! PSADMIN.3964: Attempt to Begin on field CRPROD
  
  073717.DCB - STG-APP3! tmboot.3744.864.-2: 24/04/2012: Tuxedo Version 8.1, 32-bit
  
  073717.DCB - STG-APP3! tmboot.3744.864.-2: LIBTUX_CAT:681: ERROR: failed to create the message queue
  
  073717.DCB - STG-APP3! tmboot.3744.864.-2: FATAL: internal error: CMDTUX_CAT:1098: ERROR: cannot create the queue
  
  073717.DCB - STG-APP3! PSADMIN.3964: Attempt to end boot on domain CRPROD

  If you are using a terminal server server, make sure that you connect to the console on the server session (using mstsc/console or mstsc/Admin, depending on your windows version of the client).

  Kind regards
  Bob

• 101202 BPEL process (Oracle AS) of the migration to SOA Suite 11 g (WLS)

  Hi all
  
  I am looking for more information on the migration processes BPEL developed using 101202 BPEL Process Manager struggle to run on AS Oracle 10 g, Oracle SOA Suite 11 g running on Weblogic Server.
  
  Pointers is very appreciated.
  
  Thank you
  Anish.

  Looking for info on integration OSR 10 g and SOA Suite 11 g I found this link (http://docs.oracle.com/cd/E12839_01/upgrade.1111/e10127/upgrade_soa_apps.htm) that might help you.

  Published by: alfredozn on November 15, 2011 11:26

• Receive the error message cannot start the base engine, the application can not continue trying to work with Skype and Intervoip

  Original title: Intervoip and skpye does not work on my computer. When I open the PC screen, cannot start the base engine, the application can not continue. How I have this problem?

  My Intervoip and skpye does not work on my computer. When I opened the PC screens, failed to start the base engine, the application can not continue. How I have this problem?

  Base engine
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/core-engine/a18d491c-25e2-4473-A03B-1f3161c5131b

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  Two applications load mode safe mode with setting in network or a clean boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  If you test with another Windows user, have the same problem?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.