Cannot start the operating system preinstalled on Satellite L350-170

Similar Questions

• Cannot start the operating system

  Hi everyone, I've seen many similar scenarios. Not sure if mine is unique. I do not get a syntax error as others, and this was not due to the update of windows. Our suddenly stopped working.  I tried knocking PF12 w/out of the options for safe mode and couldn't get to a MSDOS command prompt I just get blank screen.  I have the CD to our computer that comes with it when we bought there are records of the operating system, but do not say recovery or restart the disk label so I didn't know if she would it reboot or rewrite it. All ideas and comments are greatly appreciated.

  Tell us the brand and model of the PC and what version of XP (Home, Pro, or MCE) runs as well as the Service Pack level.

  Do you have critical data on the backup computer?

  If this is not the case, press the "F8" key after the computer starts:

  support.Microsoft.com/kb/307852

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to start the installation of recovery on Satellite L350-170?

  Hello

  I'm new to this so please be gentle with me! -J' have a Toshiba Satellite L350-170 (Windows Vista SP2). I burned the recovery DVD 2 right after that I got back. I decided to get it back to factory settings, so I put the first recovery disc in the drive and... nothing. It will not automatically play/start to start the recovery process. I can access the files on the drive through "MY COMPUTER" but you can see a 'set-up '. I had already used the discs to recover and it worked then no problem.

  There is nothing wrong with the computer or the error messages

  Apologies if its been said before, but can someone help or I would like to know what is happening please?

  with deep gratitude

  Myke

  Hello Mike

  If it worked in the past that I n t see the reason why it shouldn't still works one time, except the discs are damaged.

  Anyway, try this:
  Start your laptop and press F12 repeatedly to enter the boot menu
  Insert disk 1 into the optical disc drive
  In the list, choose the CD/DVD drive and press ENTER

  ODD must start to read the disc and you should see something on the screen.

  It works for you?

• Satellite M60-167 cannot start the operating system

  The name of the model Satellite M60-167.

  Laptop turns off after a few minutes of work.
  Then I format C with Windows XP Pro, but it turns off as before.

  I did not finished the instalation and now I can't enter to finish.
  I had only blue screen same not the Toshiba screen on start.

  Can not enter the bios as well.

  Please help if you can and thanks for all!

  Post edited by: cota26

  Hello

  > Laptop computer just turn off after a few minutes of work.
  > Then I format C with Windows XP Pro, but it turns off as before.

  I think this sentence is the key description resembles your laptop could overheat and automatically stops.
  Why is this happening? Well, the laptop could overheat temperature high inside the laptop. It will stop automatically to prevent the equipment from damage.

  My long experience, a clogged cooling fans could be responsible for the bad cooling and the temperature high.

  So what to do?  :|
  In my opinion, he must clean the fans to get rid of dust and debris.

  The jet of compressed air is very useful tool and could help you to clean the fans.

  Hope this helps to get the laptop running.

• Cannot find the operating system files

  Cannot find the operating system files after system, Windows 7 error Ox490 HP Pavilion e9150t recovery

  Thank you very much I'll check on that.  Ended up doing a restore of the original.  Painful but successful.

• Update the BIOS W540 2.18 cannot start any operating system

  I try to update the BIOS of the thinkpad w540 BIOS version 2.18.
  Everything seems to work fine and it tells me the update is flashed.

  But now, when my w540 starts, it does everything as usual, but when you start to load the operatig system it turn off and restart and that is again and again.

  I can get into the BIOS setup and the version is update a (2.18)
  I can change in the BIOS options and can I choose where my w540 boots. I try to boot from the HD, a CD, a flash, but no use (using Windows 7 on HD and flash Linux and ESXi from CD).

  My problem, I can not start any operating system present.

  Can anyone help please, thank you.

  In the BIOS under startup under Startup UEFI/Legacy, set options "both", "first heritage."

• How can I identify the version of the operating system preinstalled?

  Hello

  Sorry for the stupid question, how can I identify my girlfriends preinstalled the operating system?

  Hello

  Start - Control Panel of configuration-system and safety - system, where you can see installed Os version

• Remove windows vista without starting the operating system

  Hello! IAM using windows vista. Lately, I just figured that the computer has the virus iam so think upgrade to windows7 and I want to remove vista first. Is it possible to remove vista without starting? Sombody help please! Thank you!

  Hello

  1. you must have an operating system to be upgraded; in your case vista

  You cannot delete vista

  2. an upgrade is performed from an operating system of windows in your vista case, unless microsoft advises otherwise; does not apply in your case

  solve your problem of malware or clean reinstall vista 1st - then upgrade

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ____________________________________________________

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  ___________________________________________________

  information about windows 7

  It depends on if the manufacturer of your computer/laptop has windows 7 drivers available for him as to if it will work properly

  check with them

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  _____________________________________________________________

  and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• Computer cannot start an operating system STOP error message: 0 x 00000024

  Origianal title: computer can not boot the operating system

  Appeared in my computer: STOP: 0 x 00000024 (0 X 00190203, 0X82F4D5D0, 0x00000000

  What is happen?

  Unfortunately, we know absolutely nothing about your system.

  This is because the MS Answers forum does not prompt for any information system when a new question is asked.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Method 1 - last good known Configuration will not help you (this is not what is LKGC for).
  Method 2 - a good start but only if you have already installed XP Recovery Console (extremely unlikely on this planet) or have a genuine XP installation CD bootable (most people don't).

  It makes sounds like you need to run chkdsk /r from the XP Recovery Console to repair your (NTFS) file system, but you will have to start on something for this.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  Not knowing anything about your system, I would say this:

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• How to change Windows 7 Boot Manager options to start the operating system automatically?

  I recently installed windows 7.  When boot to windows 7 my computer goes to the Boot Manager and ask me to choose the operating system.  I tried to remove the previous OS, but windows 7 does not start automatically.  What can I do?

  Hello

  To make your Windows start directly without prompting for the splash screen, follow the steps below:

  1. click on start

  2. click on Control Panel

  3. click on system and security

  4. click on System

  5. click on system settings advanced (on the left pane), and then click the Advanced tab

  6. under Startup and recovery, click settings

  7. now uncheck the box "Time to display list of operating systems" then click apply and then click Ok.

  For reference, click on the following link:

  Change the default operating system for startup (multiboot)

  http://Windows.Microsoft.com/en-us/Windows7/change-the-default-operating-system-for-startup-multiboot

• BlackBerry 9550 smartphones - cannot load the operating system and a re-boot loop

  Sorry if this is going to be a long post.

  I've been running OS 428 and a hybrid (428 based) since it was leaked without a hitch. 2 weeks ago, my 9550 rebooted on its own with a JVM ERROR 534 (I think it's the code because the screen just turned white with the error message and then rebooted on its own). He never started up properly then. The boot process dates back to about 3/4 of the way then the FMV of error appears again then re - start. A batt pull does not help.

  I wiped and loaded (loader.exe) operating system but when loading cod, it will again restart (reboot occurs when email.cod is loading). Tried several times and never loaded properly. I tried a load OS 428 right and it went well. When it is started successfully, I wiped the device and loaded the hybrid that I used before and everything was fine. When filtered 451, I upgraded and everything is fine - for a week!

  He has just restarted on its own again. I think with the same JVM error code! I'm unable to load the operating system using loader.exe. I even tried the "loader.exe /nojvm" switch does not. I wiped with Jl_cmdr or BBSAK, still no go. I then used DM BB. I loaded OS 320 and loaded correctly. Then I wiped and loaded the OS. It is not load or when it loads successfully, the JVM error still appears 3/4 of the way of the boot process.

  So when I load OS 320, it will load fine even after a battery pull. If I use OS 428 or 451 (both narrowed via Shrink-a-BONE), JVM error no longer appears when using the device or during the startup process. Don't forget not that previously I was using either straight (shrunken) 428 or 451 and a hybrid with no problems.

  I decided to try a derelict OS 451 and used the "Platform.alx" of OS 320 file. It works so far! Pulled the battery about 4 - 5 times already and loaded all my apps and no JVM error for about 2 days. I tried right OS 320 and he also re - will start on its own several times a day.

  It looks like completely wipe the device using BBSAK, Jl_cmdr and DM BB do not really completely clear the device.

  What could have caused the reboots and error JVM?

  EDIT: I tried to wipe the device using the erase option in the security options. The status bar has reached 100% and then restarting the device, the FMV of error pops up again and my 9550 goes back to a continuous process of reboot (even pulled the battery).

  EDIT: I tried the command line "javaloade.exe usb - cloth" to wipe the device and the OS loaded (using loader.exe /nojvm) very well. In the end, shippers said "updated successfully". The unit restarted and about 3/4 of the way - another jvm error! I removed the battery and wait a few minutes before re - insert and is currently the starting now... Will update what's going to happen...

  EDIT: Yes! It finally starts. Will try an another battery pull... 1/4 of the way in which the boot process - another JVM error! Pulled the battery and restart... Error JVM still about 50% in the boot process.

  EDIT: Can't get any OS to load using 'loader.exe' or 'loader.exe /nojvm. It stops during email.cod loading, then restarts. I was able to load OS 320 well via BB DM. problem is when I click on Options, error: "error starting net_rimm_bb_options_app: symbol KeywordFilteredScreen.» KeyChar "not found" is my watered device? Help, please. Thank you!

  EDIT: I tried to load the operating system by:

  -remove the battery.

  -Connect to the PC.

  -Command prompt: command /nojvm loader.exe

  -When it says connection to the device and the battery with a red 'X' icon is displayed, I re - insert the battery.

  -The operating system loads very well but are unable to properly start like 3/4 of the progress bar startup occurs an error in the JVM and then reboot again. Help!

  --> Was able to start properly after a second reboot not forced. Will try a battery pull... JVM error again... Will allow it to boot on his own w/o a battery pull...  Error JVM... Removed the battery, re - insert... Error JVM... allowed to start on its own... Error JVM!... I remove the battery and reinsert after 5 minutes... JVM error yet... What is it recharges without end?

  Just had my 9550's replaced and all of the good mother!

• Cannot save the key product for my Satellite L350-262

  I've only had the laptop for 3 weeks, that it is the model of window 7 Satellite L350-262

  I tried to register my product key and it telling me invalid what can do? Please

  He repeats to me also that some files on my c drive are corrupt I tried it backup to see if he gets rid of them but nothing happens

  Hello

  to be honest, I don't know on what product key that you say. I know, it's windows preinstalled. You can read this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53991&TSTART=0

• Satellite Pro S500-10F - cannot reinstall the operating system

  Hello

  I have a Satellite Pro S500-10F provided with Windows 7 Professional with downgrade rights (and DVD) to XP Pro. I downgraded to XP Pro and everything worked fine (I did it on a number of similar machines).

  Then Windows started to have problems and crashing with BSOD. I decided to rebuild the machine to reinstall Windows XP Pro from DVD supplied with the machine. The thing is it gets 2% and then gives the BSOD.

  I thought it was the hard drive because there was some disk errors when it removed and put it outside of another machine, so replaced. Still the same problem. I tried to connect external USB DVD drive and boot from that. He did indeed start the external drive but then for some reason, try to copy the files of its own DVD player. I tried to reinstall Windows 7 Pro of the DVD to the top together, I created, this failed. I tried to install Windows XP Pro since version box and have failed.

  At this stage do not know if DVD player or what. He tried to build start player flash, but even if the system seen as boot option, then tried to boot from the network?

  Any help much appreciated.
  Thank you
  J

  Hey Buddy,

  To be honest I put t think that it is what you can do. You have tested the recovery disk and a new HARD drive, but the same happens. So that would mean it's hardware related problem.

  TOSHIBA recovery disk contains an image pre-tested all drivers and tools. This means that you can still install Windows recovery disc and it will work. If it's not (like in your case) it something wrong with the hardware.

  If your laptop is still under warranty valid, you can bring it to a service provider allowed in your country and guys can fix this for free because of the guarantee. Get in touch with technicians and explain your problem, they will sort it out for you. ;)

• Unable to run the operating system on Toshiba Satellite L500

  Hello
  I can't get my Toshiba Satellite L500 13D PSLJ3E to work. Here is the chronology:

  1. I brought with Win Vista, it worked great for about 6 months, but began to slow and I decided to change to Windows 7

  2. I installed Windows 7 using custom install (create new folder 'windows', not upgrading to Vista). Once more, it worked fine for about a month, but once more, he ran into trouble - indicating the version of Windows 7 the screen blue of death for 0.5 seconds, followed by a reboot.

  3. I've been searching the net and they said that the best way to get rid of the problem is to re - install. I did (after trying it several windows repairs), but yes, that's right, he's dead - before you start windows, it showed problems with Realtek Wireless.

  4. I had hope that this third time - will work her charm and re-re-installed W7 (each time using new installation).
  Once more time - does not work, but this time I can't even install - windows installer stops at about 60 percent of expansion records and wrote: difficulties with the media device. And after restart I can not find the Hard Drive(the BIOS shows only FDD and CD/DVD)

  Now I'm stuck here, the only way to start the windows is in Mode safe on my Wondows installed on point 3, but not all the time.
  Unfortunately, the first of my recovery DVDs cannot start and on top of that I can't get into the recovery partition by pressing 0 at first upward, but I see the recovery Partition when I go to the WIndows Installer.

  PS: I have problems with the high temperature of the laptop.
  Is it possible that HD goes out to safe the data thereon for overheating?

  Thanks in advance.

  > 4. I had hope that this third time - will work her charm and re-re-installed W7 (each time using new installation). Once more time - does not work, but this time I can't even install - windows installer stops at about 60 percent of expansion records and wrote: difficulties with the media device. And after restart I can not find the Hard Drive(the BIOS shows only FDD and CD/DVD)

  Do you mean that the HARD drive is not recognized by the BIOS?
  This would mean that the HARD disk is dead.
  This would explain the Windows installation problems
  I don't very well why the HARD drive died after a short period of use, but it turns out that HARD drive might die always head m accidents are not unusual and sooner or later would die each HARD drive

  However, I don't see a real solution that you need to replace the HARD drive
  If the laptop is under warranty, then you might ask a technician ASP replacement that should be done for free

  Good luck

• In the recovery system and he wants that I select configuration information. File, because it cannot find the operating system, but do not know what to choose

  Hello

  I am in the recovery of the system, which I have to by selecting f8 and "repair your computer", and after taking me to a window that says "select an oprerating system to repair...." If you don't see your operating system listed, click load drivers to load the drivers for your hard disks'.  Then when I click load drivers he wants me to select a file in System32 menu configuration information, but I don't know what to choose.

  Thank you

  Centi

  Hi centi,.

  1. Why did you start the windows recovery environment by pressing the F8 key?
  2. do you get an error at startup of the system?

  If you are unable to start Windows in normal mode, try the following steps:
  a. boot to the Windows recovery environment by pressing the F8 key.
  b. on the window that says "select an operating system to repair" click Cancel to see Windows Recovery Options window, and then select command prompt.
  (c) in the command prompt, type the following command and press ENTER: Bootrec.exe /RebuildBcd
  Output Type d and hit enter to close the command prompt.
  f. restart the computer in normal mode and check if the computer starts Windows successfully.

  Discover How to use the Bootrec.exe in the Windows recovery environment to troubleshoot and repair startup in Windows problems

  Visit our Microsoft answers feedback Forum and let us know what you think.