Cannot start the stand-alone ODI agent after activation of SSL

Similar Questions

• T400, cannot start the Catalyst Control Center - error 'GPU active not supported'.

  on a machine running vista business 64-bit current t400.

  last week all was hunky dory.  This week, when I try to open my ati catalyst (CCC) control center, I have the following error:

  "ATI catalyst control center cannot be started because the active gpu is not managed.

  I read a few posts on this problem from not using the ATI graphics card and being rather on the integrated graphics card.  indicate the positions I could reactivate CCC simply by clicking on the battery icon in the system tray and selecting "mode high performance" to force the machine to use the discreet graphics card.  After I do and then try to start the CCC, I get the same error as above.  at this point after switching to the mode high peformance, my device manager also lists "mobile Intel (r) 4 series express chipset family ' as my graphics again.  If I have left or right click on the battery icon in the status bar, I don't see any options for explicitly switching cards.

  the card driver intel 4 mobile is listed as being from ATI to version 8.520.4.4000.

  I'm not sure of my version of the driver for the ATI card.  and I don't know where to look for it.

  to my knowledge, nothing but a number of 'critical' windows updates have changed on my system between the time when CCC was working last week now.

  any suggestions on how to fix this?  and what it does to stop working?

  Thanks in advance for any help.

  I finally thought to it.  and no new drivers or relocations were necessary.  at the end of the day, all I had to do was turn on version lenovo Power Manager (which appear in my taskbar like a horizontal green battery with the number of minutes of use remaining).  from there I can left click and access the menu that has the switchable graphics option where I can choose the economy of energy or high performance.  If a from there, I select high performance, I can then open CCC.

  the important thing please note this is to access this menu, you must be using power management program of LENOVO thinkVantage (sticking the Green battery on your taskbar icon), NOT windows built in the power manager, which appears as a vertical grey/blue /? battery in the tray system (at least on mine).  Once you have, you can explicitly pass the graphics cards.

  the strange thing is, I had been accessing CCC without explicitly switching the cards without problem until last week.  so in a way that the default setting should of spent high-performance energy saving, thus putting me on the integrated graphic card unless I went it manually.  weird.

  slide, thank you for your help.  I appreciate it.  and it is an interesting note on freeing more memory by disabling the switchable graphics.  I'll probably this give it a shot and see how I like it.  memory is never bad!

  Thanks again to everyone who helped.

• Error after you start the stand-alone weblogic Server

  < 22 January 2011 19:32:36 AST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >
  < 22 January 2011 19:32:36 AST > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >
  IntegratedWebLogicServer start time: 311391 ms.
  IntegratedWebLogicServer has begun.
  Manager of the < logger > < error > ServletContainerAdapter not initialized successfully.
  
  Help, please...

  Ignore the error
  See logging and auditing 361988
  http://download.Oracle.com/docs/CD/E13217_01/WLOC/docs10/notes/known_resolved.html

• Deploying the application to the stand-alone WebLogic problem

  Hello!
  I have a problem with the stand-alone WebLogic Server applications.
  We migrated to JDeveloper 11.1.1.5 to 11.1.2.1. I followed the instructions on this page: https://blogs.oracle.com/imc/entry/standalone_weblogic_domain_for_adf to deploy our application of ADF on AdminServer. Everything worked OK.
  
  Then I followed the instructions on this page: http://docs.oracle.com/cd/E21043_01/web.1111/e13813/custom_jrf.htm to apply with our "ADF_server" the server JRF managed and got this:
  WLS: / offline > applyJRF ('ADF_server', ' / Oracle/Middleware/user_projects/domains/our_domain ')
  Read the/Oracle/Middleware/user_projects/domains/our_domain area of applyJRF
  Copy the configuration files JRF/Oracle/Middleware/oracle_common/modules/Oracle/Middleware/user_projects/domains/our_domain/config/fmwconfig/servers/ADF_server
  Components JRF target to "ADF_server".
  Update changes JRF to/Oracle/Middleware/user_projects/domains/our_domain field in offline mode
  It's probably OK?
  
  When I try to deploy a problem occurs on a managed server 'ADF_server':
  * [10: 55:08] Weblogic Server Exception: weblogic.application.ModuleException: could not load the webapp: "ADFMainApplication-ViewController-context-root."
  * [10: 55:08] caused by: weblogic.management.DeploymentException: error: unresolved Webapp library makes reference to ' [ServletContext@1542360219[app:ADFMainApplication_Project1_ADFMainApplication module: root ADFMainApplication-ViewController-context-path: / ADFMainApplication-ViewController-context-root spec-version: 2.5] ", defined in weblogic.xml [Extension name: jsf Specification-Version: 2, exact match: false] *.
  * [10: 55:08] see the server logs or the console of the server for more details.*
  * [10: 55:08] weblogic.application.ModuleException: failed to load the webapp: "ADFMainApplication-ViewController-context-root."
  * [10: 55:08] deployment cancelled.*
  * [10: 55:08] - incomplete deployment. *
  * [10: 55:08] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer). *
  
  What should I do to run the managed server? Help, please.
  Best regards, Marko

  You did to be sure that the 11.1.1.5.0 adf runtime has been installed on the managed server before installing Upgrade patches to 11.1.2.1.0?

  If this isn't the case, it is the problem. The new runtime environment is installed automatically if the olny one has been set up correctly, my personal conclusion from my tests. If you want to learn more about this check http://tompeez.wordpress.com/2011/06/25/upgrading-wls-10-3-5-with-adf-runtime-11-1-2-0-0-sherman-patch/ and http://tompeez.wordpress.com/2011/06/29/follow-up-upgrading-wls-10-3-5-with-adf-runtime-11-1-2-0-0-sherman-patch/.

  You can make the threethings:
  1. Open Enterprise Manager, select your managed server and hope you see a message like "JRF aply to this managed server" (don't remember the exact wording). To do this, and libraries must configure OK.
  2. open the administration console and select the necessary shared libraries and add your manages the target server. Problem is that you don't know what libs are needed. If you don't mind target libraries to the managed server. Not sure if this causes problems later.
  3 write information on the managed server as port, domain names machine name. Remove the server managed the installation of WLS. It must be very sad that you upgrade and which should be no application or shared library of your one deployed on the managed server. After removal of the old successful server closes wls and start it again (just for security). Now, create a new managed server with all names, ports, and other information like the old using the quick start tool.

  I prefer the 3 method, this one worked for me all the time.

  Timo

• 'Simulate download' option appearing only in the stand-alone Flash Player debugger

  I have a strange problem - today I seem to have completely lost the 'Simulate download' option in the menu display of the standalone Flash Player. When the problem started, I ran the last 11.5 TIME Installer Flash drive and then downloaded the latest version of the debugger, but still no dice. The stand-alone version, that I am running is called "flashplayer_11_sa_debug.exe" so it should work. Is there something special I need to do after loading a SWF file to get the ability to simulate the download? I thought that any standalone player debugger should give me the option of the simulate download once I loaded a SWF, but I tried older versions and they are also not showing this option for some reason any. :/

  FWIW, I use Flashdevelop and Flash CS5 Pro - I tried building/launch of my Flashdevelop project (which launches the debugger 11.x player) and directly from CS5 ide (which launches a debugger 10.x player), but neither has the simulation download option more. I also tried to launch another, older Flash project and I got the same results in the player.

  I can't imagine what is wrong, since this feature was yesterday in the drive and I don't have any major changes to my configuration of Flash Pro/Flashdevelop (AFAIK). Any help would be greatly appreciated, thank you!

  OK, I got it working again... I guess download simulation is only shown for me doing a release, not make a debug version. I don't understand, but I'm going with it! Thank you.

• PROTECTED 2010 cannot start the Slimline Combo drive

  Hello

  I have two Portege 2010 with two different Slimline Combo drive for Cardbus cable - no two computers are able to start readers Slimline Combo. Two computers with each different drive have been works perfectly in early September, but none now.

  A computer does not recognize the drive of all - the other answer in the hardware profile, it cannot start the drive.

  Both computers are running Windows XP 2nd edition.

  ????

  Thank you

  Best regards
  Anne Mette Voss

  Hello

  Do you mean that the external CD/DVD drive for PC card cannot be recognized in Windows XP?
  Hmm I think I have an idea.
  I think you should go to the Device Manager and remove the * Texas Instruments PCI controller card bus * and * Toshiba ToPIC100 CardBus controller *.
  Reboot the laptop.

  After restarting, the operating system must install new hardware (two controllers carbs) and after this installation, you can try to connect the external PC card, CD/DVD drives again!

  Good luck

• Unable to start the system in xp sp3 after you download windows updates

  Cannot start the xp sp3 system after downloading windows updates.  I really need to be able to save the items that were on my desk.  system does not boot in safe mode or any other mode.  just keep trying to restart.  I do not see a blue flash screen by a fraction of a second.  Cannot read anything due to the short time.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/307545

  Check if that helps.

• Windows cannot start the firewall service.

  Original title: my firewall stopped working and it won't let me turn it back on.

  My computer has alerted my that my firewall was off this morning. The alert came with the possibility to reactivate after having used the option of tis, another box emerged stating that it cannot be turned on again and try to activate it manually. I tried to turn it on manually and it still doesn't work. He is said to be the first "Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the Windows Firewall Service? "after you press 'Yes', it says"Windows cannot start the firewall service. No error message is given. Any ideas?

  Hey, bed,.

  File system (CFS) auditor scan and see if it finds a breach of integrity. If so, System File Checker will try to replace missing or damaged files.

  Information available at:

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to create multiple user login on the stand-alone machine on Windows 7 Professional

  Dear all,

  I want to implement multiple user login on the stand-alone machine of Windows 7 Professional (there is no working group or active directory).
  There are 20 users in different positions.
  I want to create each logon with different password and set user policies.
  If I create so many users there will be number of boxes. So, I want the user to type their name and the password and login.
  Please help me if I can do it, and if the issue is not clear, let me know so that I can help what I want.
  Thank you
  Gregory Mhatre

  I have not tried (not had W7 pro), but this is the info you wanted? - http://social.technet.microsoft.com/Forums/windows/en-US/d42b07fa-530f-442a-9340-7f892e22a3be/change-login-prompt

  As I say, cannot try, just found by a search. Hope that I have not misunderstood.

• Download the stand-alone host to vCenter License Server failed because the exception: vim.fault.HostConnectFault.

  Location:

  ESXi 5.5 Update 2 stand-alone host with a licnese Essentials

  vCenter Server 5.5 Update 2

  Whenever I'm going to add this host to vCenter he fails with the error: download the file < HOST IP > license to vCenter Server failed because the exception: vim.fault.HostConnectFault.

  I restarted the server vCenter, tried different credentials and looked through all the articles online that I can find online with the same question and nothing none of them suggested has worked so far.

  Thoughts?  Ideas?

  I'll leave this here in the event that it helps someone else.  I was using an administrator account on the stand-alone host in an attempt to add it via vCenter.  Once I started using the Root account on the host, I could add without problems.

• Can I save between a test and the stand alone version?

  Can I save between a test and the stand alone version?

  You're right, the CC version is activated with your Adobe ID and password once you have signed up for the plan of creative cloud. You can uninstall this CC version and install the standalone version. It of the same program and opens the same catalog. You don't need to save anything. Simply move to the standalone version and start Lightroom. Everything will work out just the same6.

• Discover the definition could not be found on the stand-alone server

  Hi all.

  I'm working on jdev 11.1.1.5

  I created the new module in the application, it works very well in integrated weblogic. But when I am deploying, it is not wrking. When I click on the page, I get the definition of reportinResultVo not found error...

  Why it is happening.any suggeston

  Hello

  I also met this thing. But I'm sure, in my case when I create VO, I type the name of the VO. After the creation of the VO, I just rename. Somehow, rename any process is not successful. On the side of jdeveloper, I saw the name.but updated when I checked on the file system, it's always the old name. And that's why the stand-alone server does not receive the view definition. I've created VO again or try to rename according to you.its works for me.check names in your jdev and file system...

• Download the stand-alone Flash Player does not require a browser? I have ver 11.5 r502 I d/l the last year; want a more recent version.

  Download the stand-alone Flash Player does not require a browser? I have ver 11.5 r502 I d/l the last year (February 11, 2013); want a more recent version.

  Cannot find a lot on the standalone viewer, except in the docs of Flash Builder, who says a .swf can specify to use. I can't find a download link.

  Thank you, Doug

  You can download the standalone player (projector) since https://www.adobe.com/support/flashplayer/downloads.html

  Note that the download is the player, not an installer, you will need to manually .swf file association.

• Cannot start the unit because the authorization service is not running - cannot start service

  I'm weirded out. When I try to start the unit on my VM, I get the following message:

  The Virtual Machine cannot be set to Unity mode because:
  -The VMWare authorization Service is not running.

  So, after a little checking, I realize that indeed, the authorization Service is not running on my host. I am trying to launch and get the following message (translated from the french, sorry):

  Windows cannot start the VMWare authorization on your local server. For more information, see Event Viewer. If this isn't a Microsoft service, contact your service provider indicating the service specific error code: 6000002.

  Event Viewer is a little more detailed... But not really useful:

  Unable to retrieve the token for the user to VMware: unknown error 1385 (0 x 569) (1385)

  NONE of these error messages to display more than a few visits on Google, especially not in exact search (with quotes around the exact phrase) mode. I'm at a loss as to what I can operate the unit.

  Technical details:

  Host: Windows XP SP3 (French)

  Dell Optiplex 760, Intel Core 2 Duo E8600 @ 3.33 GHz. 3 GB of Ram.

  VMWare: 7.0.0 build-203739

  Client: Windows XP SP3 (English)

  I have attached my log of vmware just in case. Will be extremely grateful for any help!

  Thank you!

  The only other thing I can think is a reinstallation of the vmx86 service. Rerun the batch previously posted like this, with the extreme detail;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning vmx86

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  and repeat once more for authd thereafter;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning authd

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  If this does not help I suggest you reinstall workstation completely from your own account. Don't forget to note your serial number if your IT Department has already given it you.

  Joakim

  BTW, it might be that your group policy to prevent something. Check with your IT, if others have the same problem.

• Cannot start the database the R12 DR Oracle EBS of RAC 10 g R2 using SRVCTL

  Hello
  
  I've implemented Oracle 10g R2 RAC data DR Guard for main server Oracle 10 g R2 RAC for EBS R12 (12.0.4).
  I followed Note + ' Business Continuity for Oracle Applications Release 12 on Release 10 gr 2 - Single Instance Database and RAC [452056.1 ID]. +.
  After you configure DR DG, I added DR Database to the Configuration of the Cluster. But I'm not able to start the DR Database via SRVCTL. But able to start the DR Database through Sql * more. I have already mentioned Note: + troubleshooting when srvctl cannot start the RAC instance, but sqlplus can start [ID 844272.1] + and tried to solve the problem but without success.
  
  , I opened SR but still, the problem is not resolved. Are there steps I need to do that is not mentioned in Note 452056.1.
  
  Rgds,
  Thiru

  Have you reviewed these docs?

  CRS - 215 srvctl cannot start ASM, listener, %ORACLE_HOME%/bin/ resources RDBMS with error [740319.1 ID]
  Could not start the Instance with Srvctl, no Info in the newspapers of Imon [ID 741212.1]

  Thank you
  Hussein