Cannot start VM after upgrade ESX 5.5.

Similar Questions

• Satellite L100 113 starts slowly after upgrade memory

  Hello

  Toshiba Satellite L100 113 PSLA3E-02401JRU starts slowly after upgrade memory with Kingston KTT533D2-512 (512 MB) of memory.
  When I press the 'power' button, it flashes, starts the fans and HARD drive several times. Then it shows BIOS start messages by memory full 768 MB and starts Windows XP without a problem.
  This behavior is noticed only after "shut down."
  It does not happen with "restart".
  What can I do to eliminate this long "attempts" to start my laptop computer?

  Thank you
  Novomir Kovalenko

  Hello

  This problem appears before upgrade memory?
  Have you used exactly the same memory modules?
  If this isn't the case, then perhaps there are a few compatibility issues.

  Usually, after the insertion of the modules you must enter the BIOS and then save the settings. Please it and eventually the laptop will start without any problems.

• do not start cc2015 after upgrading Windows 10

  Do not start CC2015 after upgrading Windows 10!

  What can I do?

  A time CC2015 open and that thr program stop and closed.

  Can I read a text at the present time it is not possible.

  What can I do?

  Best regards

  Sandte

  Hi Brucgovn, thanks for the answer! Just sorted and came here to update the post.

  My method is similar, I just do the following:

  1. Go to C:\Program Files (x 86) \Adobe\Adobe Creative Cloud\CoreSyncExtension (this was the only file on the left, all others had been removed from the CreativeCloudCleaner use of the Adobe Creative Cloud cleaning tool to solve installation problems running
  2. I came across the problem trying to remove, so used Unlocker (Download Unlocker 1.9.2 - FileHippo.com) to unlock. Then deleted. It's explorer.exe using the process, which I think caused questions... the process is using the file
  3. Reinstalled and everything seems to work.

• Cannot start windows after update

  After you install a windows update, my computer cannot start windows, when I boot it.  It seems the windows files.  I don't have a recovery disk (lesson).  I have windows vista, is there anyway to restore windows on my PC other than buying the software.  I confess that I do not download updates often... that is why... It's always trouble.

  Hi, MooreTM,

  Brand and model of your computer, please.  Thank you.

  (1) you are able to start safe mode and do a system restore?

  Start the computer

  Start typing F8

  Select Mode safe mode with networking

  What a load Safe Mode, start > all programs > Accessories > system tools > SafeMode

  Select a date and time before the Windows update that caused the problem

  (2) start Windows and tapping F11 key

  If the Advanced Options screen, select fix my computer

  Press enter

  I suggest the site of the manufacturer of the computer and purchase a reinstallation DVD software.  Cost is minimal ($16.-$20.)

• Microsoft NLB blocking after upgrade ESX 5.0

  Hi all, I'm new to vmware

  We improve all our ESX 4.1 to 5.0 in February, after that, a lot of multicast NLB Microsoft hangs before upgrade, we used about 2 years with no problems.

  After upgrade, we have 3 fixed NLB or conflict for 3 months.

  Any idea? in the VMware.log prompt, I don't see anything specific related to the networks of the time incident.

  Thank you very much

  Open the VMware folder and confirm this problem for the network card Broadcom is known

  VMware KB: 5719/5720 Broadcom network adapters using driver tg3 become unresponsive and stop traffic vSphere

• cannot start win8 after memory upgrade

  Hi I have a HP Pavilion P6813w

  It came with win 7 64 bit installed with 6 GB of ram
  I created a duel with victory 8 boot
  It was working fine until I got my 16 GB of ram today
  Well I got the 16 GB in and turn on the computer to get to this
  Recovery
  your pc needs to be repaired
  the application or the operating system could not
  be loaded because a required file is missing or
  contains errors.
  file:\Windows\system32\winload.exe
  error code 0 xC0000001
  but when I'm out of 8 GB it starts and displays the 8 gb of ram.
  I tried to do the repair installation dvd options since the win8 and even tried it recover usb option
  When I use the usb option I get error 22 grub 1.5
  so my question is why win8 will not load with additional memory
  and even win 7 does not load
  It gives me the same error
  my computer shows he takes supporting up to 16 GB
  4 GB ram sticks
  IM experience pc users and cela just stem me
  any idea what could be the problem

  Hi Wallace,

  There is a limit of memory for Windows 8. For version 512 GB for 64 - bit and 32-bit maximum 4 GB is allowed.

  For more information, see the links.

  Limits of memory for Windows versions 

  The memory upgrade (RAM): HP Pavilion p6813w Desktop PC support

  If you have any questions on Windows, feel free to let us know. We are happy to be of assistance.

• Impossible to get updates of Windows to work and cannot install anything after upgrading to SP3

  After the upgrade to SP3 I met many problems. Any time I go to install it I get a Windows Installer error is not installed (even if this is the case) and I have to go to start/run and type Services.msc and the go to the installer of windows and right-click on it and select start and then install what I was tring to do.  Windows Update will not update and I tried to restart the installer and it does not work.  I tried the auto fixes but cannot get them to work because they will not install either or will not run.  I had to uninstall Windows Defender as I am unable to update the definitions it is basically useless.  All this started after I did a full cleaning of the computer and then downloaded the original Windows XP that I bought from Dell.

  Try this:

  http://www.ehow.com/how_7176381_microsoft-install-after-installing-SP3.html

  I hope this helps.

• File download window cannot be resized after upgrade to Firefox 7

  After the upgrade to Firefox 7.0.1 the upload file window is small and cannot be resized.

  This looks like what is whether, as you initially specific to the site.

• Cannot set UEFI after upgrade to 8.1 Windows (P6 HP 2364ea)

  Hello

  I recently bought a HP P6 (Pavilion) 2364ea tower that came with Windows 8 is installed. When buying I could enter the parameters of UEFI at startup by pressing one of the function keys. Now that I have upgraded to 8.1 Windows no splash screen or UEFI settings are available when booting - any function keys I type.

  I tried to reboot to the Windows Advanced Boot-> troubleshoot-> advanced options-> settings for UEFI firmware road but the PC starts just to a white screen with no hard disk activity. I then reboot into Windows 8. The same thing happens if I try to change the windows startup options.

  Any help would be greatly appreciated!

  Thank you

  Gary

  I have now managed to access the UEFI settings using an old VGA monitor to start instead of my screen thanks to a post of dave2009 on another thread. For anyone having the same problem here is his message:

  I hope it will work for you or someone else. I felt the same way - try to access the settings of the PC UEFI firmware and got a screen empty every time. Tried the ridiculous press F10 every second. Nada.

  Fortunately, I came across this post that put me on my solution. It's actually the BIOS could not display on my monitor (s).

  The BIOS has been there all along, but I didn't know it.

  My setup is a HP Envy with Intel HD graphics office built in connected with DVI to HDMI cables to 2 HP w2338h monitors that have a native resolution of 1920 x 1080 or more. Solution? Unplug everything and plug an older monitor CRT HP with a VGA to DVI. Seriously. My new HP desktop cannot display the HP BIOS on my HP flat screens. Now, I'm not going to dig into this but I suspect even just plug one of the flat screens equipped with a VGA connector could do the trick.

  And wa - la. My firmware is not corrupt. I need not do anything crazy. I just needed to downgrade my video connectors in order to see the bios. And, now that I have my graphics card inherited here, I see this cute bootscreen of HP. Previously, black until the windows open. It's a whole new world!

• Cannot start the VMs on ESX 4.0 stand-alone host

  Hello

  We have two standalone ESX 4.0 host. They have recently lost power, and since then, we are unable to do anything with virtual machines.

  Security will not plug a laptop so I can't connect to a host using the vSphere Client.

  The command line, I ran:

  GetState \vm.vmx VMware-cmd < path_to_vm >

  VMware-cmd < path_to_vm > \vm.vmx start

  Both times, I get this error:

  vim.faul.HostConnectFault: unable to connect to localhost ({(vim.fault.No.Permission)

  dynamicType = < unset >;

  dynamicProperty = (vmodl. DynamicProperty) [].

  MSG = authorized to perform this operation was denied.',

  faultCause = < unset >

  faultMessage = (vmodl. LocalizableMessage) [].

  object = "vim. File: ha-folder-root',

  privilegeId = "System.View.

  })

  It seems that 'root' has lost its permissions to start the virtual machines! Unfortunately, the engineer who built the servers is therefore more around and there is no documentation for them. Can anyone suggest what that might be?

  Thank you Andre,.

  This is the user-error (shame on me).

  Before discovering the fault, I checked the article kb 1031192 and permissions in the file permission (or authentication) were right. -(1).

  It's been so long that I used ESX / Service Console that I forgot to do "su-" rather than "su root" from the non-privilegie account to the root account.

  When 'esxcfg -' orders have also failed, I Googled it and found the answer on the Blog of Simon long.

  (Google 'ESXCFG Command not Found' and found on simonlong.co.uk). This machine will not let me copy / paste so that I can not paste in the link!

  Well - I had the problem solved after that. Thanks for the reply!

  Have a great weekend people.

  Alex

• Cannot start TIME after TIME

  Hello

  I need your help to find what is happening.

  VAPP was arrested, that Ant after that I can't start. The web interface error Director Cloud is:

  The operation failed because no appropriate resource was found.

  I can't create new virtual machine in this TIME, error 'failed to create. Other vApps in the same virtual organization work normal. I can create and start the virtual machine in another on the Organization even VAPP, it means that we have enough resources.

  Transport of WHAT VM to another TIME would be problematic, because of large VM disks.

  Any suggestions how to fix failed VAPP? The Director Cloud server log files when I try to power ON VM is attached. Director of cloud version 5.1.1

  Upgrade VCD 5.1.1. 5.1.2 fixed this problem. Thank you for your advice for resolving this issue.

• WebLogic 10.3.5.0 will not stop or start propperly after upgrade Jdev

  Greetings,
  
  Our developers have installed Weblogic with Jdeveloper. Now, I'm trying to set up a production environment and use only the version of the ADF.
  DOWNLOAD, ADF runtime is available in version 11.1.1.6 only.
  With that, I was able to start and stop WebLogic, connect to the console via http or https.
  
  Now, I did the upgrade to ADF 11.1.2.3 using $MW_HOME/wlserver_10.3/common/bin/config.sh.
  The weblogic process starts, but the console is not displayed. Not on the client, not the server (Oracle Linux 6.3).
  When I use stopWebLogic.sh to stop WebLogic, I get:
  
  means: PermGen space.
  
  I put the MaxPermSpace in setDomainEnv.sh to 4096 m. It always seems that the MaxPermSize value is not used.
  After this error, the java process remains. The process of java:
  
  Oracle 29419 29366 18 15:54 pts/4 00:00:43 /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/jre/bin/java-Xms1024m-Xmx5120m-Dweblogic.Name=AdminServer-Djava.security.policy=/u01/Middleware/wlserver_10.3/server/lib/weblogic.policy-Dweblogic.ProductionModeEnabled=true-da-Dplatform.home=/u01/Middleware/wlserver_10.3-Dwls.home=/u01/Middleware/wlserver_10.3/server-Dweblogic.home=/u01/Middleware/wlserver_10.3/server-Dcommon.components.home=/u01/Middleware/oracle_common-Djrf.version=11.1.1-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=/u01/Middleware/user_projects/domains/base_domain-Djrockit.optfile=/u01/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt-Doracle.server.config.dir=/u01/Middleware/user_projects/ domaines/base_domain/config/ fmwconfig/serveurs/AdminServer-Doracle.domain.config.dir=/u01/Middleware/user_projects/domains/base_domain/config/fmwconfig-Digf.arisidbeans.carmlloc=/u01/Middleware/user_projects/domains/base_domain/config/fmwconfig/carml-Digf.arisidstack.home=/u01/Middleware/user_projects/domains/base_domain/config/fmwconfig/arisidprovider-Doracle.security.jps.config=/u01/Middleware/user_projects/domains/base_domain/config/fmwconfig/jps-config.xml-Doracle.deployed.app.dir=/u01/Middleware/user_projects/domains/base_domain/servers/AdminServer/tmp/_WL_user-Doracle.deployed.app.ext=/--Dweblogic.alternateTypesDirectory=/u01/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1 , /u01/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1-Djava.protocol.handler.pkgs=oracle.mds.net.protocol-Dweblogic.jdbc.remoteEnabled=false-Dweblogic.management.discover=true-Dwlw.iterativeDev=false-Dwlw.testConsole=false-Dwlw.logErrorsToConsole=false-Dweblogic.ext.dirs=/u01/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath weblogic. Server
  
  Java $ [oracle@OL-WLS-PRI] - version
  Java version "1.6.0_24".
  OpenJDK (IcedTea6 1.11.9) runtime environment (rhel - 1.57.1.11.9.el6_4 - x86_64)
  OpenJDK 64-bit Server VM (build 20, 0 - b12, mixed mode)
  
  
  I am new to WebLogic.
  What can I check to the cause of this?
  After the start, newspapers shut up.
  
  The server has 8 GB of memory fysical.
  
  Java takes up 1, 6 GB of memory.
  
  Any help is very appreciated.

  Hello

  Didi you follow all the steps in the following link. (What about orders---> upgradeADF)

  http://www.Oracle.com/technetwork/developer-tools/jdev/11gr2update3-1851251.html#11.1.2.3.0ShermanUpdate3-ReleaseNotesREPOSITORY-deployment

  Download and install WLS 10.3.6. Download and install the Application Developer 11.1.1.6. For more information, see the Oracle Fusion Middleware Installation Planning Guide.
  Run the Configuration Wizard of Fusion Middleware and create a new domain or extend an existing domain using the form of statement TOGETHER, EM + GOSA field template.
  Download the Opatch beams 11.1.2.3.0 and use the opatch tool to apply the patches (see install the Patch below).
  Stop servers to domain target.
  Run the command "upgradeADF" of WLST in offline mode (see run the commands below).
  Restart the servers.

  Nilum.

• CPU is not allow to the machine after upgrading ESX 3.5 vSphere4

  I upgrade the host ESX 3.5 to the vSphere4.Upgrade process has been completed successfully, but an error message shows on the screen of welcome to vSphere 4.

  "TSC: 1256115 CPU init:461: The Execute Disable / feature no. Execute CPU is not allow the machine."

  The host machine hardware specification is blew

  Model: IBM eServer BladeCenter H...

  CPU cores: 4CPus x2.333GHz

  Process type: Intel (R) Xeon (R) CPU

  5140 @ 2.33 GHz

  Please help...

  Depending on your server, in select BIOS of the server "Advanced Setup"-> 'CPU Options', you should see 'CPU Execute Disable Bit' and 'Intel Virtualization Technology. Make sure that both are set to "Enabled".

  After you save the BIOS settings, make sure you can completely cycle the server (cold boot).

  André

• VMware Tools status shows OK after upgrade ESX

  I installed my ESX 3.5 U3 (build 123630) server to build 130756.

  All virtual machines watch tool OK status, even if they are to 123630. If I connect in a virtual machine and open VMTools plateau, the upgrade button is grayed out.

  If I manually start an upgrade VMTools, it upgrades 130756 tools.

  How to change the current version of the tools in Virtual Center?

  Some of these improvements have no change with VMware Tools. However, when you do a manual installation, they will show the new build number.

  He is allowed to stay with the version of the tools that you have at the moment. Unless VC deferred that tools are outdated.

  Hope that answers your question.

  -Surya

• Cannot start windows after trying to resize the partition.

  I tried to use utility disk to increase the size of my windows partition, of course, broke TI boot camp should have read this on the community before the trial.

  I use all the solitaire t controls, including the following

  Fdisk e/dev/disk0

  p

  setpid 4

  07

  Pavilion 4

  p

  To write

  There

  That did not help, I don't see windows when I hold down the option key. The windows partition exist again, however, which is good. Also, I turn off csrutil, I use the latest version of Mac OS X

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 165,1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 85.0 GB disk0s4

  Cs diskutil list

  No logical volume group CoreStorage found

  sudo TPG - vv - r see the/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 322541752 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  322951392 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  324220928 166012928 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  490233856 863

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  Udo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 0 0 2 - 25 127 14 [1-409639] < unknown ID >

  2: AF 25 127 15 - 1023 254 63 [409640-322541752] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [322951392-1269536]

  * 04:07 1023 254 63-1023 254 63 [324220928-166012928] HPFS/QNX / TO THE

  Help, please.

  Please after the release of

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  Since there is no extra partition now, did you remove using disk utility?