Cannot start windows after trying to resize the partition.
I tried to use utility disk to increase the size of my windows partition, of course, broke TI boot camp should have read this on the community before the trial.
I use all the solitaire t controls, including the following
Fdisk e/dev/disk0
p
setpid 4
07
Pavilion 4
p
To write
There
That did not help, I don't see windows when I hold down the option key. The windows partition exist again, however, which is good. Also, I turn off csrutil, I use the latest version of Mac OS X
diskutil list
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 251,0 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_HFS Macintosh HD 165,1 GB disk0s2
3: disk0s3 Apple_Boot Recovery 650.0 MB HD
4: Microsoft database BOOTCAMP 85.0 GB disk0s4
Cs diskutil list
No logical volume group CoreStorage found
sudo TPG - vv - r see the/dev/disk0
Password:
See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752
See the TPG: / dev/disk0: MBR suspicious to sector 0
See the TPG: / dev/disk0: Pri GPT to sector 1
See the TPG: / dev/disk0: GPT Sec at sector 490234751
start index size summary
0 1 MBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 322541752 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC
322951392 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
324220928 166012928 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
490233856 863
490234719 32 table dry GPT
490234751 1 dry GPT header
Udo fdisk/dev/disk0
Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 0 0 2 - 25 127 14 [1-409639] < unknown ID >
2: AF 25 127 15 - 1023 254 63 [409640-322541752] HFS +.
3: AB 1023 254 63 - 1023 254 63 Boot Darwin [322951392-1269536]
* 04:07 1023 254 63-1023 254 63 [324220928-166012928] HPFS/QNX / TO THE
Help, please.
Please after the release of
sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C
Since there is no extra partition now, did you remove using disk utility?
Tags: Windows Software
Similar Questions
-
Cannot start Windows after trying to install the Vista SP2
I just tried to install Vista SP2 and now whenever I try to turn on the cpu it gives me a blue screen and restarts. It does allow me to start in SafeMode either. In addition, it seems to be impossible to find my restore points. I was able to stop the screen using the F8 menu and it gives me this error on the blue screen
STOP: 0X0000007E (0XC0000005, 0X81C223BB, 0X803998F4, 0X803995F0)
For some reason, when I go to the cmd prompt to advanced troubleshooting guide, I can do, he says that I am the X and not the C drive, if that has something to do with my restore points does not.
I tried to get the menu of the restoration on C manually through C:\windows\system32\restore\, but nothing was there.
Any help would be appreciated. I will not lose rather all my data in a reformat.
Thank you
MattWhat application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)? Who were these applications that run in the background when you installed SP2?
A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?
0X0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
A system thread threw an exception who did not catch the error handler. There are several individual causes for this problem, including the hardware incompatibility, service driver or defective peripheral system or software problems. Check (EventVwr.msc) event viewer for more information.
Source: http://aumha.org/a/stop.php#0x7e
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.Common exception codes are:
0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred. [emphasis]
Source & more: http://msdn.microsoft.com/en-gb/library/ms795746.aspxFree unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack).
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Cannot start Bootcamp, after you have added the partition using disk utility
My question is similar with repair Boot Camp after having created the new partition.
recently I install the el capitan + windows 7 (using bootcamp), everything works fine after I add the third partition. (I anticipate the third partition will be use for dropbox, for mac and windows can sync-ing a dropbox for each folder).
After I've done the third partition and restart the system, I want OPTION and found no windows.
My mbp spec:
MD101 2012 13 ",
SAMSUNG 850 PRO SSD 256GO,.
16 GB RAM,
elcapitan OS x + windows 7 ultimate.
Thank you
Can you post the output of the following commands in OSX Terminal?
diskutil list
Cs diskutil list
sudo TPG - vv - r see the/dev/disk0
sudo fdisk/dev/disk0
The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.
-
Cannot start windows after resizing partitions
I tried to resize the partitions of my bootcamp and mac recently
I can't start windows now
Get an error on the lack of MBR
Do you think you could help me out here?
I read on another thread using GPT fdisk
These are the results I got her
Wanted to check before doing anything
Sanjayas-MacBook-Pro: ~ sanjaya83$ sudo fdisk/dev/disk0
Disk: geometry / dev/disk0: 38913/255/63 [625142448 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 1023 254 63 - 1023 254 63 [1-409639]
2: AF 1023 254 63 - 1023 254 63 [409640-349609376] HFS +.
3: AB 1023 254 63 - 1023 254 63 Boot Darwin [350019016-1269536]
4: 0C 1023 254 63 - 1023 254 63 FAT32L Win95 [351289344-273852416]
Sanjayas-MacBook-Pro: ~ sanjaya83$ sudo gdisk/dev/disk0
GPT fdisk (gdisk) version 1.0.1
WARNING: Open with shared lock devices will not have their
table partition automatically reloaded!
NOTE: Pass the test failed with the error number 1. It will be impossible to save
changes to the table to partition on this drive!
You may have to disable the Protection of the integrity of the system to use this program. See
https://www.Quora.com/How-do-I-turn-off-the-rootless-in-OS-X-El-Capitan-10-11
For more information.
Scanning partition table:
MBR: hybrid
BSD: absent
APM: absent
TPG: present
Found a valid GPT with hybrid MBR; using GPT.
Command (? for help): p
Disk/dev/disk0: 625142448 sectors, GiB 298,1
Logical sector size: 512 bytes
Identifier (GUID) of disc: 55739070-E42E-4414-947D-F1AAD2EB65D0
Partition table contains up to 128 entries
First usable sector is 34, last usable area is 625142414
The partitions will be aligned with the boundaries of sector 8
Space is free total 1453 sectors (726.5 KiB)
Starting number (sector) end (sector), Code name of size
409639 40 1 200.0 of MiB EF00 EFI system partition
350019015 409640 2 166.7 giB customer AF00
3 350019016 351288551 619.9 MiB AB00 Recovery HD
4 351289344 625141759 130.6 giB 0700 BOOTCAMP
Command (? for help):
My 5 hours of experience with gdisk commands, etc., rebuild your MBR is, if done correctly as the tutorials tell step by step, sorta safe. Don't take my word for it at all, but I had no problem. Here again, I have really no experience at all. Please allow someone else to answer this question as well.
Good thing that you are checking.
Jeroen M.
-
Cannot start windows after update
After you install a windows update, my computer cannot start windows, when I boot it. It seems the windows files. I don't have a recovery disk (lesson). I have windows vista, is there anyway to restore windows on my PC other than buying the software. I confess that I do not download updates often... that is why... It's always trouble.
Hi, MooreTM,
Brand and model of your computer, please. Thank you.
(1) you are able to start safe mode and do a system restore?
Start the computer
Start typing F8
Select Mode safe mode with networking
What a load Safe Mode, start > all programs > Accessories > system tools > SafeMode
Select a date and time before the Windows update that caused the problem
(2) start Windows and tapping F11 key
If the Advanced Options screen, select fix my computer
Press enter
I suggest the site of the manufacturer of the computer and purchase a reinstallation DVD software. Cost is minimal ($16.-$20.)
-
Satellite C55 - C - 1 M 0 - cannot start Windows after the installation of the Dual Boot
After I installed Ubuntu, when I try to start Windows, the process stops and says that there is a mistake: NTFS_FILE_SYSTEM. But I can't run Ubuntu without problem.
Is there any special step before installing a Dual Boot with Ubuntu system?
My laptop is a Satellite C55 - C - 1 M 0.
Thank you. Kind regards.
I guess the problem is due to changes in the size of the partition. I found a few questions about google with a ubuntu - NTFS_FILE_SYSTEM query. Maybe you should take a look https://www.google.fr/search?q=ubunt...sm=93&ie=UTF-8
-
Cannot start Windows after log-in initial screening... screen is blank
Out of the Blue yesterday, I was unable to boot WIndows 7 and I've now exhausted everything that I can find to get help. Here's what happens: turned on computer, screen load with "starting windows" and windows icon hits the screen. The login page is displayed (daisy aqua orange screen). I get my login password. The next screen is "Welcome" (background aqua), then whites out screen just for one second (really a flash), which he has never done before. Then around the top of the 'Welcome' window comes with the circle of blue rotation... spins & turns but nothing going forward. Then a black screen appears after some time that says: "Please wait" in the middle of the screen (never seen it before either). While blanks on and there is nothing else but a black screen. I waited forever, thought there was a minor problem and Windows would finally load but nothing. I'm working now to try to fix it, nothing helps. I am currently in Safe Mode, which is all I can be right now, and the system does very well in this mode. I checked the bios to see if my hard drive has been registered, and it was. I "ve restored my system to 3 weeks (before some updates) and that didn't work either. I downloaded HP Vision diagnostic on a CD and that ran through the whole system and nothing has been revealed that needed fixing or change. So I did a HP recovery disk, thinking I can delete my system whole back to factory settings, but I'm afraid to do because I don't know if Windows 7 is on the recovery disk and what will I do if not? Sorry, it's very long, but I'm frustrated and don't know what to try now. Can anyone help! ?? Thanks in advance.
Hi @Annie777,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I read your post on how your desktop off intermittently when you load into windows, that the problem does not occur in Mode without failure, and I would be happy to help you!
To ensure that this issue has nothing to do with the material, I advise you to follow this document on Troubleshooting overheating and the issue of Auto Shutdown.
The next step that I suggest is to start the PC in Safe Mode of Windows 7 and uninstall the following updates:
a. KB2982791
b. KB2970228
c. KB2975719
d. KB2975331
In addition, you can also follow the steps in this document on the using Microsoft System Configuration (Windows 7). This should help to turn off non-Microsoft services or background programs.
Alternatively, you can order the CD from recovery for your computer by following this resource on obtaining a HP recovery discs or a USB HP recovery disk.
If the problem persists, I recommend to perform a backup and restore of your operating system. To do this, please follow this document on the backup of files (Windows 7), and more to perform a recovery of the system HP (Windows 7). This should help to restore your system to the factory settings.
If your laptop stops intermittently, please call our technical support at the 1-800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.
http://www.HP.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Concerning
-
Windows 8 | Cannot start windows after the mode "Eve" [Mobile]
Separated from this thread.
Hello
I have the same problem. I put my laptop (windows 8) to sleep and after a few hours when I tried to open it, it was just a white screen. I tried everything you mentioned (windows + w, windows + x, windows + r), but all in vain. Only thing that responds is increase/decrease brightness and volume. Help, please. Also when I try to stop him, he falls asleep.
Hello
Thanks for posting the query on Microsoft Community. You have reached the right place. Let us work together to find the cause of this problem and try to solve.
Update you the drivers for graphics cards?
If you have not updated the graphic card drivers, then I suggest you to update the drivers of graphics card on the manufacturers website and see if that helps.
Troubleshoot video card
http://Windows.Microsoft.com/en-AU/Windows-8/find-install-display-driversI hope this helps. Let us know if you have other problems with Windows in the future.
-
Cannot start Windows install error "3 that the system cannot find the path specified".
Original title: problem with Windows install
the installer of Windows won't work, made sure that it's automatic in services, but when I click start it says error 3, the system cannot find the path specified
Hello
- Did you changes to the computer before the problem occurred?
Method 1: I suggest you unregister and re - register the windows setup program and check if that helps you. To do this, please follow the steps below:
Unregister and register the Windows Setup program again
(a) click Start, click run and then type cmd in the dialog box, and then click command prompt.
(b) at the command prompt, type the following and press ENTER after each line:
MSIExec /Unregister
MSIExec/regserver
Method 2:
Also I suggest you to update your installation Package of Windows with the latest version of Windows Installer available in the link below.Windows Installer 4.5 Redistributable:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=enHope this information is useful.
-
Cannot start windows after Windows update
Dear support team,
I can't boot my system after updates since yesterday. She is hit on the blue screen of death after giving BAD_POOL_HEADER. It works fine in safe mode, but in normal mode, it is showing blue fill Θcran again and again. I used (F8) at startup boot in the last known configuration it shows the windows failure recovery changes update configuration.
Please help me to solve the issue.
Concerning
Aditya Asati
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Satellite L40 - cannot start Windows
Hello
hope you can help, my computer Toshibal L40 laptop on commissioning began by displaying the following error message:
* "Cannot start Windows. a recent change in the software hardware might be causing... » *
It offers the possibility of:
"* Launch Startup Repair option" * "I chose this. WIndows seems to load up, but then I get the following error message:
Installed program cannot start. Click OK to turn off the computer *.
I lost the recovery disk, but attempted to load the recovery console by using a windows XP disk, but it gave me error message more. Advice would be very welcome.
For the installation of Vista you don't need SATA driver but for Windows XP Home edition you need. Is no problem at all.
The question is what you want to do now? If you want to use Vista just use recovery media and you will have factory again.
No problem at all. -
I tried Windows 10 and after 10 days of hell, I asked them to uninstall. But went with is my old Acrobat Reader. I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too. A friend told me that I have to uninstall and then re-install again. I am a 71 years who does not know what to do. Help
Hi jimm13886845,
Of course I'll help you get this problem is resolved.
Run this cleanup tool to uninstall any old version of Adobe Reader Download Adobe Reader and Acrobat tool - Adobe Labs.
Restart your computer and then installer you old version of Adobe Reader using this link Adobe - Adobe Acrobat Reader DC Distribution.
Let me know if you encounter a problem, we will be happy to help you.
Kind regards
Nicos
-
I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help
1. did you remove Bootcamp using disk utility?
2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.
-
I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do?
Hello
Your question is beyond the scope of these forums.
Please use the following links for that matter.
Network Infrastructure servers Forum:
http://social.technet.Microsoft.com/forums/EU/winserverNIS/threadsCategory of the Windows Server:
http://social.technet.Microsoft.com/forums/EU/category/WindowsServerConcerning
-
When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.
Hey Abdul HamidNagoor,
· Did you do changes on the computer before the show?
· You get the error message?
· What is the brand and model of the computer?
Follow the steps in the article.
Advanced Troubleshooting for General startup problems in Windows XP
If the problem persists, follow the steps in the article.
How do I recover from a corrupted registry that prevents Windows XP startup
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756
Maybe you are looking for
-
Have the new Apple Watch series 2 so I can swim with it. Swimming is my main activity during the week. Is there something special I need to do when I swim? I know how to start the activity. I didn't know if there was a setting I have to change t
-
Tecra A9 accident using Windows 7 Ultimate
Crash my computer laptop windows 7 ultimate 32 bit, 0 error instalation 00000124 x (0 x 00000000, 0 81487024, 0xb2000040, 0 x 00000800)I replace hd and result from memory, with ditto
-
HP ENVY bow 27-k127c TouchSmart all-in-One desktop PC
Hello I just bought this pc all-in-one touchsmart from costco. I noticed that I can't adjust the brightness of the screen. I went from that some forum messages that had similar problems for other hp computers, but none seem to work on this one. Anyon
-
Pavilion Entertainment PC: HP Pavilion Entertainment PC - administrator password
I have HP Pavilion laptop for my daughter. She forgot the password to start. I get the 66137279 code You have a code to unlock the system?
-
Dear users, dear experts, I fight for the list of my contacts in the Contacts app for all my accounts. I'm new to BB OS10 terminology, so please be patient with me - I try my best to explain my problem in detail. * contacts does not show for the emai