Cannot start VM due to missing file after consolidating snapshots

Similar Questions

• I tried Windows 10 and after 10 days of hell, I asked them to uninstall.  But went with is my old Acrobat Reader.  I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too.

  I tried Windows 10 and after 10 days of hell, I asked them to uninstall.  But went with is my old Acrobat Reader.  I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too.  A friend told me that I have to uninstall and then re-install again.  I am a 71 years who does not know what to do.  Help

  Hi jimm13886845,

  Of course I'll help you get this problem is resolved.

  Run this cleanup tool to uninstall any old version of Adobe Reader Download Adobe Reader and Acrobat tool - Adobe Labs.

  Restart your computer and then installer you old version of Adobe Reader using this link Adobe - Adobe Acrobat Reader DC Distribution.

  Let me know if you encounter a problem, we will be happy to help you.

  Kind regards

  Nicos

• Satellite Pro A60: Windows XP cannot start isapnp.sys driver missing or corrupt

  I had a Satellite Pro A60 for about 3 years without problems.

  Last week Toshiba touchscreen developed vertical lines of the bleeding and I got error message "Windows XP cannot start because of the missing or damaged driver isapnp.sys. I tried using the recovery disk, but it loads OK, but it fails to make a difference. Hard drive seems to work OK as slave to another computer.

  No matter what wil suggestions appreciated!

  Thank you

  Found this Microsoft Knowledge base article:
  You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup

  http://support.Microsoft.com/kb/315311/en-us/

  Can it help

• Cannot start Windows on first boot (works after restart)

  I recently removed the dust in the housing using a bellows, at the end of which I had unplugged and removed by the drive hard and video card. After reinserting the components and start the computer, I heard a continuous beep sound while the screen remains dark. After the reopening of the case I noticed that I forgot to plug a wire into the video card (PCI I think) I plugged. After you start the computer again once it wasn't a beep more and I got the video. However, Windows does not load on first boot more. He will go as far that the loading screen of the bar after which I get a 'no signal' and the computer restarts. I will get a screen with the message that Windows cannot start, probably due to software or change of material and a number of options. When I choose to start windows normally it will mostly start normally (sometimes I need to repeat the process) and I can use the computer normally (I use it now). A reboot, the computer has been shutdown very slowly and later wouldn't pass the default splash screen, but it has not reoccured.
  Another small issue, I'll have is a regular of the screen flicker.

  I used the drive control to the start of several times. I tried to address this problem by starting the computer with the Vista installation disc and select Repair, but I was not allowed to fix the menu says there where no problem. I reinstalled Windows (and I can't be fully updated all the drivers again, hance perhaps the flicker of the screen?), but to no avail. The closest thing I've met on the internet who resembled my problem was this: http://answers.yahoo.com/question/index?qid=1006011905618 so, I replaced the BIOS battery, which once again changed nothing (BIOS holds settings BTW). In fact, once I'm on Windows I would seem to have a computer that works very well. The issue doesn't bother me so much if I wasn't worried, that it could get worse.

  I have Vista 32 bit, Intel E6750 CPU, card mother Gigabyte GA-P35-DS3, Geforce 8800 GTS 320 MB video card, 2 GB of RAM, Samsung 400 GB HD Vista has been entirely updated (including SP2).

  Hi CeCoRM,

  I suggest physically wipe you the hard drive again by blowing air earlier could have pushed the dust particles away on the inside.

  I would recommend also you post your question in the TechNet forums for assistance.

  Hope the helps of information.

• RealPlayer does not open due to missing file MSVCP90.dll

  I try to open realplayer and every time I get the same error message: Realplayer does not open due to missing file MSVCP90.dll. I tried to uninstall and reinstall a clean version and it's the same result every time! What I am doing wrong? How can I solve this problem? I have a laptop HP 1030NR which uses xp edition sp3 family. Can anyone offer any suggestions?

  The problem is that RealPlayer needs pieces of Visual Studio/Visual C++ libraries and that is not finding them on your system.  You do not have to install all this junk - just distribution (like MSVCP90.dll) files.

  You can look in Add/Remove programs and see what Microsoft Visual C++ redistributes you have installed right now (you can have none).  I installed them in 2005.  You may have none or more installed.

  I would like to download the latest Package Microsoft Visual C++ 2010 redistributable and install it from here:

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=5555

  Reboot and see if RealPlayer is happy now.

• Adobe Edge animate 2014 cannot start! -"d3dx9_43.dll' missing. Several re - installed same problem. Help? :(

  It is the Dialogue I am presented after each attempt to launch Adobe Edge animate CC 2014.

  "EdgeAnimate.exe - system error."

  "The program can't start because the C:\Program Files (x 86) \Adobe\Adobe edge animate CC 2014\cef\d3dx9_43.dll is missing on your computer." Try reinstalling the program to fix this problem. »

  I have re-installed edge animate several times now, even computer rebooting between installs. For some reason or another, whenever animate Edge is installed, this particular "d3dx9_43.dll" file will not be installed with. What can I do? I use Animate frequently enough that this will become a problem if she cannot resolve it quickly. Help, please.

  I thought about it. I just had to find my computer 'd3dx9_43.dll', then copy of System32(not cut) in the right folder edge animate. There is no need to reinstall or restart. I already had the latest version of MS Direct X installed, so all that was left was to have the file copied to the correct folder.

  Edge animate works now stellar.

• Cannot install applications he said missing files or if it install it comes up with open with dialog

  I tried to install the software after the installation of the operating system on my new internal hard drive. But whenever I have to install something it says some missing files and even if it installs I could not open the application. It popups opened with the dialog box.

  Hello sandrine,.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. After you have installed Windows on your PC, you are able to install Windows updates?
  2. Have any security software installed?
  3. What is the exact error code/message you get when installing applications?
  4. Are you logged in with an administrator account or a standard account?

  Try these steps and see if it helps you to solve the problem.

  Method 1

  First of all, try to run the fixit/convenience store described in the article mentioned below. This fixit is used to fix the below mentioned corruption.

  • Registry keys damaged on 64-bit operating systems
  • Corrupt registry keys that control the update data
  • Problems that prevent the installation of new programs
  • Problems that prevent existing programs are completely uninstalled or updated
  • Problems you block of uninstalling a program through Add or remove programs (or programs and features) in Control Panel.

  Solve problems that block the programs to be installed or removed

  Method 2

  There could be a chance that the service responsible for the installation of application does not run. So, I suggest you to check if the installation service is running and its status is automatic.

  • Press the Windows key + R to open Run box.
  • Type services.msc in the Run box and press on enter.
  • Look for the Windows service install.
  • Right-click on the service and select Properties from the list.
  • Start the service if it is not executed.
  • Make sure that the Startup type should be Automatic.

  Get back to us with all the necessary information and the result of the proposed suggestion. We will be happy to help you further.

  Kind regards

• Missing files after the update

  my laptop has been updated when we had a power cut, now it says I have missing files and will not start, I tried the restore from you and start in safe mode, and none of these options work. Please can anyone help the laptop is a Toshiba and it has windows Vista installed.

  Thank you very much

  Hello

  in Safe Mode does not work:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Missing files after system restore

  My computer crashed in what appeared to be a virus.  I did a system restore, but now I always have missing files.  I can find them if I search but I can't navigate to them.  Any ideas?

  Never mind.  The restored files were hidden... weird.

• Missing files after update CC

  Creative cloud demanded an update yesterday. Once the complete update, my Cloud Files all a designer began a process of course. Boring, I thought, but no big deal. Turn, it was a big deal. Miss me him now all older files until July 2015.

  Then I connected my online account thinking maybe it was some sort of timing issue. Shows exactly the same thing. Unable to find a single file like July 2015, I have several. The Archives section shows a handful of my missing files, but when I click on Restore, they disappear from the archives section and disappear completely.

  I contact Adobe support via online chat, and that has proved so far to be a waste of time. Can not pass on the phone as all the options related to creative cloud of the results in a message saying that there is no phone support for my product.

  -Update

  Finally received assistance via chat. Come and discover, all my missing files were contained in a file in the section of the online archives. Here, it is not possible to display the contents of the folder, size, etc. Several folders and files are duplicated on all restore. With folders, entitled source files contain only files from 8 July 2015. Duplicated, to which is added a '1', contains only files of 7 July 2015 and more. Now, to browse, comparison and merging everything back to the way his supposed to be.

  At this point, all I can say is what a waste and waste of time!

  Lessons learned: Before the creative cloud update, be sure to create a backup of all your creative cloud documents!

• Missing files after changing computer with Adobe first Elements 9

  Hello

  I recently changed my computer, and I installed Adobe first Elements 9, I had on my old computer. I actually changed my computer hoping that it would be better, because she was always crashing on my old computer. I tested it, I created a new project and everything went very well. But of course, I also want to continue my old editing projects. The problem is that, even if my library is organized as with my old computer, Adobe Premiere is not able to associate the files in my projects at their source. If each of my files (sounds, videos, music, effects) are not recognized, and I need to restore one by one by clicking on them and the research in my library. Now, I quickly realized that I could not go that way, because I'm editing of thousands of files.

  But I have trouble believing that there is no way first can recognize files by itself, like iTunes can do when the music is missing. I mean, first knows exactly how the missing files are supposed to be, then why couldn't he find them? Does this mean that if my computer was broken, I could not able to change my old projects on a new? This makes no sense.

  Thanks in advance,

  MrJoshameeGibbs

  MrJoshameeGibbs

  Thanks for the reply.

  To check the version... Please open Premiere Elements in his chronology workspace. Go to Menu Help / about Premiere Elements. The top of the screen that opens should include a version 9.0.1 if you have downloaded and installed version 9.0.1 and work from it.

  Please consider the following strategy and see if it solves the problem... just do it for a project as a series of tests...

  1. back to the computer 1, open your project and determine that it opens with the media source associated with the project.

  2 create a folder "copied" using File Menu/project Archiver and its choice of copy a project.

  3 transfer the folder "copied" 2 hard drive... maybe with USB Flash drive.

  4. Ouvrezledossier "copied" on computer 2, find the project file (PREL), right click, select open with, and then Adobe Premiere elements 9.0.

  The project opens in the Adobe Premiere elements 9.0 on the computer 2 with all its current source media?

  RTA

• HP laptop will not start and cannot reload Windows due to corrupted files

  I have a HP laptop, (belongs to my grandson) and am not able to reinstall Windows. I get an error 0xc0000098.
  I wanted to get into the Bios to format the hard drive, but I could not.
  Any suggestion to solve this problem?
  Thank you very much.

  John

  Hello

   
  1. What is the model of the computer?
  2. Once you get the error message?
  3. What is the exact full error message
  4. have you made changes on the computer before this problem?
  5. what version of Windows you are trying to install?
   
  For the information of the BIOS:
  I suggest you to consult the manual of the computer. You can also download the manual of the laptop from this link using the laptop model.
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can contact the manufacturer of the computer for the installation of any related issue of BIOS support.

  You don't have to go into BIOS to format the hard drive.

   

  Consult the following links if you are using Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

   

  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-installation-problem-cant-boot-to-installation-disc

   

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

   

• Get a message Windows cannot start because of some dll file missing

  Original title: computer has been hacked. no longer starts, can I use a copy "bought" Windows XP SP2 disk which is not installed on a different computer?

  1.) my mother's computer was hacked and fails to start.
  2.), I have a retail disk: Disk Installation of Windows XP SP2.
  (3.) I apparently do not have the serial number of the retail disk. It was purchased when I bought a computer years and has never been used.
  4.) I need to wipe my mother's hard drive and install from the installation of Windows XP purchased disc, but I'm having a problem without the serial number of disks.

  Thanks for your support!

  Hi FrippMalover,

  You can use the following link to retrieve Windows XP if you have found the system32\hal.dll missing.
   
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.
  http://support.Microsoft.com/kb/314477
   
  Hope this information helps.

• Office files and missing files after reboot. Windows XP

  I have a user who uninstalled Acrobat 8 Professional and when they restarted and stored in their profile all the icons and files have disappeared. I tried to do a system restore to the point before the uninstall and still no luck. Everything that is related to the profile is always functional (i.e. printers network, Outlook settings, network drives.)  It's like just wiped profile or delete Desktop folder.

  Hello

  Method 1: perform the steps from the link below and see if it helps.

  Your desktop icons are missing in Windows XP

  Method 2: perform the steps from the link below and see if it solves the problem.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  Hope this information helps.

• Cannot insert pages in a PDF file after having signed with a digital signature in adobe 9

  Is there no workaround solution that allows me to insert additional pages in a SIGNED pdf file?

  Background:

  Author of a form create a form that needs multiple signatures and attached pages and converted to PDF format for the signature. Person 1 sign and sends it to the person 2. Person 2 must include additional documents and insert pages before signing.

  In the new version, I noticed that it changes the security documents that may prevent the insertion after logging it. How can I disable this?

  Hi Bob,

  You don't like the answer, but it cannot be disabled. In previous versions, when you added a page it invalidates the signature. Starting with Acrobat 9, once the PDF file is signed is no longer changes the content of the core PDF. The change was made to protect the integrity of the signature. You can still add comments, but (without being too geeky) comments are not part of the core PDF as pages are, they live in a separate level. In addition, you can always add data form, but as the comments, what you type into a form is no field not part of the core PDF.

  The main thing is, we made the change to protect the integrity of the signture, and signature protects the integrity of the document. Thus, changes made to the document are no longer allowed in signed files.

  Steve