Cannot start vmware - black screen

Similar Questions

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• Qosmio F50-125 starts with black screen after a BIOS update

  Hello

  After instalation if new bios (v 2.0), computer sometimes starts with black screen.
  Even the first page that show press F2 to enter the bios is not displayed.

  You have someone older version of bios?
  So, I might try if it's the fault of it.

  Hello

  I think that the old BIOS will not help you because the laptop would have known that you try to update the BIOS to the older version, and it would break to the top of the procedure.
  In addition, the older BIOS is not available on the European driver Toshiba page.
  I think just only a Toshiba ASP had an older version of BIOS.

  Anyway, you said that sometimes happens.
  This means that this issue doesn't still persist
  Hmm. in this case, I recommend the default BIOS settings and update the driver display.

  Check it out!

• MY TOP of DELL Dimension 1100/B110 DESKTOP will not start windows black screen of death.

  I had my computer when there was a power failure in a storm, it was on a surge protector but the next day I turned on the computer, it was clicking on and then he gave me a black screen with the time system and configuration system date drive and other different things, but no screen with safe MODE or something like that. and I have no enternet, here where I live. Help me please.

  MY DELL DESK TOP Dimension 1100/B110 STARTS at THE BEGINNING, GOES THROUGH THE MAIL. SO NOT ME NOT LEFT IN THE SAFE MODE SCREEN, IF I PRESS F8, IT GOES TO ANOTHER SCREEN WHICH ME SAYS THAT MY HARD DRIVE CANNOT BE FOUND. IF YOU GO TO ANYTHING ON THIS PAGE IT TELLS YOU THE "PRIMARY MASTER" PLAYER IS... HARD DRIVE. AND THE MAIN SLAVE DRIVE IS... OFFAND STUFF LIKE THAT BUT NO SAFE MODE OR ANYTHING. MY SCREEN IS A BLACK SCREEN. AND WHEN I START THE COMPUTER THERE AS A TRIGGER FOR A BIT BEFORE I GET THE SCREEN I GET. WHAT SHOULD I DO?

  Hello

  · You have the Windows XP Setup disk?

  You can follow the steps in the below links which will help you solve the problem.

  Link: "operating system not found" or "Missing operating system" error message when you start your Windows XP-based computer: http://support.microsoft.com/kb/321626

  Computer stops responding with a black screen when you start Windows XP: http://support.microsoft.com/kb/314503

  If you do not have the disk to the operating system, then you may need to contact the manufacturer of the computer. Link: http://support.dell.com/support/index.aspx?c=us&l=en&s=gen& ~ ck = mn

• Could not start - receive black screen

  Im having problems with my windows vista, I can't seem to start, I did close downs, restarts, and now I can't get it to work in safe mode. I don't know what to do, not the PC very warned.

  original title: when you start the pc, windows never starts, so I have a black screen, will only work in safe mode

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Server will start not (black screen) because the disc needs consolidation

  Hello

  I have a vsphere esxi Server 5 with 2 virtual machines. SBS 2011 and vcenter. The server started to be very slow, so that all users could not work. So I closed the two vm and restarted the esxi. The vcenter is in place, but for my sbs 2011, I have a black screen. There is a message saying 'consolidation of disks of virtual machines is necessary. " In the Snapshot Manager, there is none but I don't see where there are large files that are instant, so I have to consolidate.

  Because the server was very slow, I have no recent backup. My questions are;

  -The sbs 2011 has been the start for an hour now, it is consolidating?

  -Should I force a shutdown of the virtual machine and do a consolidation?

  I see no error messages in the vsphere client. There seems to be some ongoing writing, so I don't know if I should stop the virtual machine or not.

  Thank you

  Hey,.

  Because the server was very slow, I have no recent backup. My questions are;

  -The sbs 2011 has been the start for an hour now, it is consolidating?

  -Should I force a shutdown of the virtual machine and do a consolidation?

  The answer to the first question is no. The snapshot consolidation happen automatically after a reboot. If there is a lot of shots, the virtual machine may take a lot of time in power.

  My suggestion would be to leave the virtual machine until it either boots or dies and then do a consolidation

  The KB below should help

  http://KB.VMware.com/kb/2003638

  If it does not, next course of action would be to group manually, but for this, it is advisable to first backup the contents of the VM folder, as any mishap with the snapshot files can potentially lead to dataloss.

  Concerning

  one

• MacBook (2010) starts with black screen with flashing Apple logo

  I recently got ahold of a Macbook Pro 2010 running very slow so I did a reinstall of the operating system (which was a living nightmare, Macintosh is not as easy to manage as it was at the time of PowerPC) once I got to the top and running, I decided to upgrade to the latest version of El Capitan (an update (not an upgrade I already had a version out there) once I rebooted and let the computer do its thing he began to start up normally, but after finishing the progress bar, he went to a black screen (with the screen still on) that flashed the boot from time to time Apple logo. I forced shut down the computer and start in safe mode with success (that's how I'm typing this post now).

  Thanks in advance.

  When you reinstalled, did you remove any third-party system before reinstalling.

  A Mac that runs in Mode without failure, but are generally not normally indicates some incompatible system changes.

  Software common problems are things that are intended to clean, protect, optimize, accelerate, or otherwise maintain your Mac.

• Starting on black screen (VFD002)

  My MacBook Pro (13-inch, late 2013, OS X 10.11.6, retina, Iris 1536 MB Intel graphics card) has the same symptoms covered by the repair Extension program which deals with the graphic problems:

  https://www.Apple.com/support/MacBookPro-videoissues/

  However, nothing is said about 13 '' models, which is my case. Why?

  Start up my laptop to a completely black screen. I ran the diagnostic test and it seems that there is a problem with the graphics card: VFD002

  It appeared after I closed the lid of my Macbook, sleep in battery mode implementation. When I opened the lid of my MBP display did not wake up from slumber. However, I can use an external monitor via HDMI, but if in SafeMode only (the retina display main black stills and the external screen is flickering when scrolling). In addition, this graphics card problem leads to crash the system.

  I already tried Resetting PRAM and SMS, but in vain.

  It my second time this has happened. The previous one-any return to normal until after a new OS install. But it happened again so reinstall OS X is not a solution.

  More and more users are complaining of the decline in the quality of some hardware components...

  However, nothing is said about 13 '' models, which is my case. Why?

  The reason is that they are not included in the repair Extension program. Follow the options in the process of repair anyway.

• FireFox starts a black screen after update 33

  After that set Firefox to update my version to 33, the application is launched in a black screen. I tried to uninstall my version and reinstall the current version (33) and it (Firefox) always throws a black full size window. No further questions with other applications.

  Could you try starting Firefox in Safe Mode? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  With completely closed Firefox, you can hold the SHIFT key when you start Firefox.

  A small dialog box should appear. Click on 'Start mode safe' (not reset).

  Any difference?

  If Firefox is visible, go ahead and disable the use of Firefox hardware acceleration as a workaround for incompatibility of graphics software possible driver card.

  "3-bar" menu button (or tools) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  This will indeed be the next time you go out and you launch Firefox upward.

• Satellite A200 - 1 M 4 do not start and black screen

  I really hope that someone can help you.
  After 15 months my Toshiba A200 seems to have given up the ghost.

  I tried to put it on today and although the blue LED on hold came and the orange clear hard disk there was no other sign of life.
  I tried and tried, but it just wouldn't start and the screen did nothing but remains black.
  I tried to take the battery for more than 30 minutes, pressing F4 - but nothing.
  I have no memory material inserted or additional cards as a webcam. Everything worked fine until now.

  I'm not very technical so you know how to help, then please explain as simply as possible.

  I really appreciate any help you may be able to offer!

  > I tried to take the battery for more than 30 minutes, pressing F4 - but nothing.
  Why try to press F4?
  However, remove the battery, disconnect the AC adapter, wait up to an hour and then reconnect the battery and the AC adapter.

  If the laptop doesn t boot I think that the motherboard must be replaced. Ask your local ASP for help. They can order and swap the motherboard.

• Satellite L775D-107 is not starting and black screen

  Hey
  I have a problem with my Toshiba Satellite L775D-107 and I hope you can help me.
  Since yesterday, my laptop displays a black screen. When I push the Start button, nothing happens, but you can hear it is aired but nothing more. a few hours before that I was working on it to Uni and everything was fine.

  I had the same problem a couple of weeks, and I read on the internet that he could help out the battery for 3 minutes and then press F2 and the Start button. Nothing happened, but after 2 hours I tried to start again and all of a sudden it started correctly and worked flawlessly.
  .
  Now I'm having the same problem again and I tried the same procedure but still nothing happens. Always the black screen and just the sound of the air coming out...

  I've got very important documents in United on this laptop, so I hope you can help me.

  Thank you in advance.

  Hey

  My L50 did the same thing. Sometimes, when an another Toshiba is nearby.

  Sombody bnows so this can't be helped?

  Mike

• Re: Satellite A100-011 does not start, a black screen at the beginning

  I have a Toshiba Satellite A100-011, which is almost 5-6 years. It suddenly started to behave abnormal.

  First of all, I started to get a 1-2 sec black screen when he was running. The screen was on and off occasionally.

  After a few days, I could not started upward from my windows xp sp3 operating system. I tried to start in safe mode with networking to see if I had a few spy, virus or something. I ran avast, hijact, ad-aware and some more, but not found anything.

  Later, I tried to format my laptop with a xp professional, but this time I can't see any reflection that passes more fun running and a black screen. I just got a black screen at the beginning and it does not start.

  I plugged on a television screen, and here I have started. I have re-installed all the drivers and formatted, but all I get is a black screen on my laptop at the beginning.

  What should I do now? Do you think I have a problem with my screen of HW or a driver problem with nvidia geforce go 7600? Maybe I'm missing something?

  Thanks in advance for all replies.

  If you can see the picture on the TV there are a few s laptop display problem. Y at - it some problem connection or display itself.

  You want to fix it yourself? You can disassemble the laptop?
  I mean if you have any experience with this kind of things that you should seek professional help.

• Satellite C660/C660D starts not (black screen)

  So this morning after having attempted to power my Toshiba Satellite C660/C660D upward I met up with a black screen.

  The power lights both work and light, fans the vortex when I turn on but nothing ever comes on the screen, I was wondering if someone could help here?

  It is less than 3 months.

  To be honest I really don t know how to help you.
  Remove the battery, leave the laptop for a while and try to start the laptop with AC power only. Try to do several times with or without battery. If nothing is done it must be a hardware problem, so I recommend you contact Toshiba service and ask for help.

  Guarantee is valid, then there is no reason to worry about this.

• Start on black screen after installing updates

  is please help because it is very annoying because I have to always use my vista recovery disk, then click on repair your computer to get my computer restart.

  * Title *.
  After that I'm going to restart my computer to apply updates my computer past the start screen and does not display the vista logo and stays on a black screen.

  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion dv7-6c75eo: 10 start Windows (black screen for about 1 min.)

  Windows 7 (System. org) was running fast and good.

  Updated to 10 and after a few reboots, it has been installed and working.

  whenever I start cold blue windows logo appears and the device goes into screen black.

  It remains so for at least 1 minute and then the login screen appears. All the drivers are updated day/install.

  I tried to do a clean 10 x 64 Windows and installed well installation and rebooted.

  This time it was much faster (a few seconds) and I went into the Device Manager.

  I could see that Windows installed the drivers for various devices like the unknown devices disappeared one by one.

  Some time after (with 1 remaining peripheral unknown not related to the problem) it restarts.

  Now I'm on the black screen again whenever I restart.

  I hope that the description of this issue is understandable

  I've updated the hard drive on a disk of 120 GB and second disk SSD Intel with a disk of 1000 GB new

  Data sheet:

  CPU: i7 [email protected]

  RAM: 8 GB DDR 665 MHz (9-9-9-24)

  MB: HP 1803

  Graphics card: Intel HD Graphics 3000 + ATI Radeo HD 6700 M

  Storage: INTEL SSDSA2CW120G3 (SSD) + Hitachi-HGST HTS541010A9E680 (SATA)

  Audio: IDT HD Audio

  Windows Pro 64-bit 10

  Temperatures: CPU: 49-51/degr. Motherboard: 51-52/degr. storage: 32 degrees.

  I hope someone can get some ideas

  PS. : I'm not a newb

  The solution is either:
  ¤ Accept the loooooong delay
  ¤ Do not upgrade for Windows 10