Cannot start windows using Startup Repair

Similar Questions

• Cannot start Windows and "Begin repair of launch" or "Start Windows normally" did not work.

  Original title: need help URGENT

  The normal Windows Vista (Home Premium 32 Bit) updated on my DELL INSPIRON laptop... Cannot start Windows

  'Launch Startup Repair' or 'Start Windows normally' did not work.

  What to do next without deleting my data? Thank you.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  Data recovery, if required

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• Satellite L40 - cannot start Windows

  Hello

  hope you can help, my computer Toshibal L40 laptop on commissioning began by displaying the following error message:

  * "Cannot start Windows. a recent change in the software hardware might be causing... » *

  It offers the possibility of:
  "* Launch Startup Repair option" * "

  I chose this. WIndows seems to load up, but then I get the following error message:

  Installed program cannot start. Click OK to turn off the computer *.

  I lost the recovery disk, but attempted to load the recovery console by using a windows XP disk, but it gave me error message more. Advice would be very welcome.

  For the installation of Vista you don't need SATA driver but for Windows XP Home edition you need. Is no problem at all.

  The question is what you want to do now? If you want to use Vista just use recovery media and you will have factory again.
  No problem at all.

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• Vista does not start, fails to Startup Repair indicating that the version of the operating system is incompatible with Startup Repair tool

  I use a laptop Dell XPS M1330, under Vista Home Premium 32 Bit. The laptop froze, I tried to do a system restore, which did not work. Now the laptop goes into startup each time put on repair. A message window appears saying "Startup Repair cannot repair the computer automatically. Startup Repair window says "Startup Repair could not detect a problem. Diagnostics details say: Root cause found: the operating system version is incompatible with Startup Repair tool.

  I tried to use the Dell Factory Image Restore to restore the system, but it does not end. I get an error message instead. There is no details, it's just a small window with an X and the Word error.

  I also tried to use resettlement Dell DVD, but that doesn't seem to work either.

  Vista does not start at all, not in either safe mode.

  I just ran to the Dell Diagnostics tool, and that is to say that the integrity test of memory has failed... No idea how to solve this problem?

  I'm at a loss and helps woukld be appreciated.

  Hi James,

  Ø are you using the correct version of the Vista disc to run Startup Repair?

  I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.

  Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.

  A. Insert the Windows Vista installation disc.

  B. restart your computer.

  C. Si you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  D. choose your language settings, and then click Next.

  E. click on repair your computer.

  F. Select the operating system you want to repair, and then click Next.

  G. in the menu system, SelectMemory diagnostic tool Recovery Options.

  Once scanning is complete, check to see if the problem is resolved.

  Access the link below to learn more about Windows recovery options in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.

  Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.

  You can also contact Dell support and check if you need to replace any hardware.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Compaq Presario SR5130NX: Cannot start Windows Vista after failure - HELP!

  Hello! My building has undergone a complete failure so 4 days ago I used it. Power resumed 3 hours later, but I was not able to log on since.
  
  
  
  
  
  Normally, I turn on my PC, and about 30 seconds later, a window pops up asking you my password. After entering it, the PC come by my office. Now, when I turn on the PC, it brings me to a blue screen with a mouse cursor in the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  When I press F8 during the boot process and choose an option from the window "Advanced Boot Options", I still can't start my computer normally.
  
  
  
  
  
  Here's the "Advanced Boot Options" I tried, after consultation with my brother a little more PC-savvy:
  
  
  
  
  
  1 repair your computer - after I see my black screen that is usual with the words "Microsoft Corporation" under the green bars that scroll from left to right for about 15 seconds, a blue screen appears with the mouse pointer in the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  2 mode safe - while the PC display several files on start up and down, it stops on "Loaded: \windows\system32\drivers\disk.sys" for about 20 seconds, then proceeds to a black screen with the words "Safe Mode" in the 4 corners and the mouse cursor at the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  3 safe mode with network - see "Safe Mode" above.
  
  
  
  
  
  4 safe mode with command prompt - see 'Safe Mode' above.
  
  
  
  
  
  5 last known good Configuration (Advanced) - see "repair your computer" above.
  
  
  
  
  
  6 start Windows normally - see "Repair your computer" above.
  
  
  
  
  
  7 debug mode - see "Repair your computer" above.
  
  
  
  
  
  I downloaded a DVD recovery based on Linux in knopper.net, allowing me to access important files, which I copied from the desktop to an external hard drive (4.1 GB iso file).
  
  
  
  
  
  PC Windows XP of my brother has a recovery disk, but my Windows Vista PC did not come with one. I've seen a few paid versions, but looked resources due to cool weather and free shipping.
  
  
  
  
  
  I can't tell if I have the 23-bit or the 64 bit version of Windows Vista, so I downloaded both versions of an open source sourceforge.NET startup repair, which I burned on 2 DVDs. After you run the startup repair program using two DVD, the diagnostic results have been uploaded online at ubuntu.com for review and technical analysis. Here are the links:
  
  
  
  
  
  http://Paste.Ubuntu.com/16018001/
  
  http://Paste.Ubuntu.com/16019372/
  
  http://Paste.Ubuntu.com/16040380/
  
  
  
  
  
  The last report ended with the words "start managed to fix...".  You can now restart your computer. "But I always encounter a blank screen (black or blue) when I try to log on to my PC.
  
  
  
  
  
  Here are my details of PC, if it is useful:
  
  
  
  
  
  Desktop Compaq Presario SR5130NX
  
  Serial number: [personal information]
  
  Product number: GC667AA
  
  Warranty end date: October 5, 2013 (according to Compaq/HP.com)
  
  
  
  http://support.HP.com/us-en/product/Compaq-Presario-SR5100-desktop-PC-series/3436764
  
  
  
  
  
  Thanks for any help you can provide.

  Hello

  Since you already have KNOPPIX I try Gparted and use it to 'clean up' the score because it will stop in an impure State.

  NTFS

  [1]

  [11]

  NTFS-3 g / important

  GParted will try.

  Also, I would consider the old problem with fat systems, floppy disks etc. which sometimes a copy of sys files from a floppy disk to a hard drive has reactivated a bootable system.

  So, if system files have been damaged, then replace them since a Setup disk.  Because he goes to options, what kind of work.

  https://en.Wikipedia.org/wiki/Windows_Vista_startup_process

  • Windows Boot Manager (Bootmgr.exe)

  • Windows operating system loader (Winload.exe)

  • Recovery of Windows loader (Winresume.exe)

• Cannot start Windows and I can't find the Vista disc.

  Hi all, this is the problem. After his stop with the option to install updates, I restarted my laptop, then he said "Windows failed to Start. Other options include Safe Mode and last good known Configuration. The two option did not work. My Windows Vista computer came with my Sony Vaio laptop and I couldn't find the disk. After various Internet research, looks like the only one that works is to have the Vista disc.

  How can I fix this without that the disc of Vista? Any help is appreciated. Thank you.

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• Cannot start Windows Vista Home Premium. Missing or corrupted system registry file.

  And I don't have the windows installation disc to fix the problem.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• Cannot start Windows error 0xc01a001d

  original title: crashed!

  Today installed some windows updates now, I can't use the computer. It comes up with!  0xc01a001d!  28589-91333 (Registry\Machine\Components\DerivedData...)  I can it work again?

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  and you could also repost the link below in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1

• Windows 7 - Startup Repair

  Separated from this thread.

  Well, the computer had problems in the past as not having spent my home screen, but it was not too bad before. After some few downloads, the computer suddenly stopped working or has worked very slowly. Then, I turned it off. I turned on her and I couldn't get past the Windows logo without error message popping up and automatically restart my computer. I tried to run the Startup Repair tool, but there is no that get stuck on a screen. I tried the mode without failure, boot, logging, and the last known good configuration, but the same error message popped up. I even tried the option to restore memory and he has not been able to pick up something wrong. My computer is a Windows 7. Now, you will be able to help me, or is my computer gone for good?

  Hello

  Startup Repair works often from an Installation of Windows 7 or Windows 7 disc
  ERD when it does not value or a recovery disc. If necessary
  How a Windows 7 repair disk is below. An ERD can be made
  on any computer with a CD burner running Windows 7, Vista or XP because it uses
  No files from the host computer.

  You can try some of them in Mode safe - tap F8 repeatedly that you start.

  If you do not have a Windows 7 disc, you can borrow a friends who are not
  protected against copying. The manufacturer of your system will also sell cheap since physical DVD
  you already have windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at ANY time benefit you from some, but not full access to the Windows)
  Go back and try again to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
   http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you try Safe Mode restore or system recovery
  or the Windows 7 disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often, these records will help when the OEM recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs. (It can be done on any computer running XP,
  Vista or Windows 7 which has a CD/DVD burner).
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How create a Windows 7 system - free repair disc (must be made on a
  Windows 7 computer running the same 32-bit or 64-bit).
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  
  An installation disc is possible also to use for repair. Of course you would
  Use your own COST (product key).

  How to: What are my options for Windows 7 reinstall media?
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

  Welcome to the recovery of Microsoft software
  http://www.Microsoft.com/en-us/software-recovery

  See MVP Andre Da Costa message in this thread.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-can-i-download-gatewaywindows7recovery-disc/3c0ecd74-CFC1-4188-89c7-a6bbe8113ee1

  ======================================

  If necessary:

  What to do if Windows does not start correctly (applies to Windows 7 as well)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  A repair Installation allows to keep the programs and data, even if redundant backups are always a good idea.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite A660-158 - cannot start Windows

  Toshiba Satellite A660-158

  I bought a laptop Toshiba Satellite A660-158. It has served me less than a week. I think it's the broken hard drive.

  My problem:
  Once I start the computer, it started and has worked for a while, but suddenly, there was an error reading that I didn't have the time. Computer has been restarted. And does not load... Until the boot mode does not reach. But the initial test (with logo) succeeded. Takes a long time and finally gives an error:
  -----
  Cannot start Windows. Maybe it was because of the recent small difference is the hardware or software configuration. To fix this error:
  1. Insert your Windows installation disc, restart the computer (the complete transmission wasn't)
  2. choose the language settings, and then click Next.
  3. Select "repair your computer".
  If this disk is missing, contact your system administrator or computer manufacturer (he turned and said to wear to the DEPOT, but I do not have this feature).

  Status: 0xc000000e

  Details: Unable to start menu, since the required device is inaccessible.
  -----
  Please help me! Idon't know what make me)
  Please write to E-Mail: [email protected]

  Post edited by: HunterS7777777

  Hey,.

  And why do you think the hard drive is faulty?
  Have you ever tried the repair your computer option? Usually with this option you can restore factory in a few minutes.

  Also if you have the Toshiba recovery disc you can also restore the factory of this disc. Just boot from it and follow the instructions on the screen. You need to do a few clicks only, installation with all the drivers and tools happen automatically.

  If you have any other questions, please let us know! :)

• Satellite L300-19F starts not-cannot start Windows

  My mobile no dΘmarre, "cannot start Windows. "To solve the problem: restart with the recovery CD.

  I can do that, but first of all, I don't want to try to save the data (and photos) from a hard disk.
  Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?

  Furthermore, all my data on E:\ partition. Will be crushed it during the installation of recovery?

  Please notify. Kind regards.

  > Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?
  No, it is not possible!
  If you should start up using recovery disc then the recovery process would be started and the whole HARD disk may be formatted!

  You can try to start by using a WinPE
  http://www.LiveCD.com/

  This allows you to start the device and access the data on the HARD drive

  You could also build own Windows live CD
  Check this box:
  http://www.MakeUseOf.com/tag/how-to-create-your-own-custom-Windows-Live-CD/

• Cannot start Windows virtual pc host (I have all the updates)

  -Cannot start windows virtual pc host - cannot start windows virtual pc host process and earlier version of microsoft virtual pc is installed on this computer.

  I have all the updates for Virtual xp downloaded from the microsoft page.  Virtualization tool runs on my system.

  What is the best?  Should I bother trying to get virtual xp installed?  Or can I just use VM ware or something similar to run a virtual system?

  Any suggestions?

  Thank you.

  SYSTEM SPECS: icor7 3.2 Ghz, 24GBz Ram, Nvidia Geforce GTX 480, Windows 7 Pro 64 bit.

  process host and earlier version of microsoft virtual pc is installed on this computer.

  You happen to have Virtual PC 2007 is installed? If so, you need to uninstall that. Click Start, type: programs and features

  Press enter on your keyboard

  See the list of program and make sure that Virtual PC 2007 is uninstalled.

  If your intention is to use Windows XP Mode, make sure that the following two files are installed:

  You must install both files:
  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run
  Restart the system, and then install:
  2 WindowsXPMode_en-we

  Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.
  For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

  Mobile: http://www.notebooks.com/2009/11/23/using-windows-virtual-pc-with-windows-xp-mode/

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Cannot start Windows RT and Reset failed (ASUS Vivotab RT)

  Hello

  I have an ASUS Vivotab RT, which cannot start Windows.

  AutoCorrect has failed, Windows/System32/LogFiles/Srt/SrtTrail.txt said each test pass, and root cause is "cannot determine the cause of the problem.

  I tried Refresh/Reset to solve problems, but they all said there is a problem and will not go forward.

  I have download a boot recovery zip someone share online (contains / Boot /sources etc., install included.) WIM), format a Fat32 drive and extract all the files, it starts (power + volume down), but after selecting the language-> troubleshooting-> reset/refresh, it's always "there is a problem".

  In addition:

  I tried bootrec /RebuildBcd, it shows the 0 found instillation. (Although my C: / he windows of course folder).

  I assigned letter of recovery in the form R, run chkdsk/f r: chkdsk C: F, no problems found.

  DiskPart:

  Volume 0 - Windows 25G

  Volume 1-300M

  Volume 2 - system-100 M

  Volume 3 - 4096M recovery Image

  ASUS support site does not help much, and it is out of warranty.

  Thank you.

  Hello

  Since Windows RT came pre-installed and require installation media to retrieve the device, you may need to contact Asus support for assistance. Please visit the link below to contact ASUS support.

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

  Since you mentioned that you can view help her out screen in your ASUS RT enrich your life, you can try the steps mentioned in the link of ASUS support below and try to reset the factory setting tab.

  http://www.ASUS.com/support/knowledge-detail/28/5/ASUS_VivoTab_RT/312D2BB3-C6EC-40F0-AFE8-90F6A0622386/

  Note: once the RESET has been performed, all data, applications, settings and personal information will be deleted after initialization.

  I'm really sorry not to be useful in this regard.

  Please do not hesitate to contact us for any further assistance on Windows.

• Acer aspier L5100 cannot start windows

  Hi, my Acer Aspire L5100 SNID [under the direction of privacy] now cannot start windows.

  Blue screen, status of the Boot Manager Oxc000000f

  required unit is not available.

  I don't have the drive to victory, what to do now?

  Advice from someone...

  probably corrupted file BCD.

  What is your operating system?