Cannot start windows vista Basic... its keep restarting

Similar Questions

• Cannot start windows vista: bugcheck 9f

  Title: bugcheck 9f, parameters = 0x3, 0xaf5fc030, 0xaf5fc030, 0x84e6c648

  my laptop crashed and closed, and I don't know what to do. can someone help me please.
  yesterday when I turned off my laptop it's ok.but today when I pressed the power button, it started normally
  He showed only two options:
  'launch start up repair (recommended)' or 'start windows normally '. Startup Repair cannot fix the problem and start windows normally does not work, it remains just on page load for hours.
  the problem is bugcheck 9f, parameters = 0x3, 0xaf5fc030, 0xaf5fc030, 0x84e6c648
  I really need my computer soon, and I do not have the windows cd .i don't really know what to do someone help me please

  Hi Ak_609,

  1. Did you the latest changes on the computer?
  2. When you receive the error message from error checking?

  First unplug all external devices (except keyboard and mouse) and then try to boot to the desktop and let us know the status.

  Method 1

  Check if the computer starts in safe mode and after back with the results.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Method 2

  If the computer starts in safe mode then I would suggest you to perform control and clean boot if it helps.

  It is possible that some third-party programs installed on the computer is at the origin of the problem in normal mode.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Cannot start windows... hangs and restarts on step 3 of 3 Configuration

  Since I was NOT automatically accept an update a few days ago my Vista system and he went ahead and made in any CASE GOD DAMN IT my PAPER WEIGHT of a PC is screeeeeeeewwwwwweeedddd. It turns to "" configuration of updates: 0f 3 step 3-0% complete "" for a few minutes... " Then it restarts and the fact again and again and again and again... yo get the point. If I try to start in safe mode or anything else... She returned to the same screen mentioned above. It is an update that screwed my pc. What I can do... I have files on my desktop that I worked all week to finish and has 5 minutes to burn on dvd, as I do it most of the time because of the Junk the rich _ Gates and his team have never fixed, turned off. The only reason I am able to type in is because IM on a Mac Book. Need HELP I have my files before turning my pc on sale... One is interested?

  Hi Nomad7071,

  Thank you for using the Microsoft answers Forum.

  To resolve this issue, try the following methods is clearly given in the KB article 949358:

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature
  Method 2: Start the system in safe mode and then use the system restore feature
  Method 3: Rename the Pending.xml file, and then change the registry.

  http://support.Microsoft.com/kb/949358

  I hope this helps you, good luck.

  Kind regards
  Manasa P-Microsoft Support

• Cannot start windows Vista in safe mode.

  I followed these instructions to start Windows 7 in safe mode:

  I tried to start windows vista in safe mode by using the following:

  1. Click on the Windows icon in the left bottom of the screen while Windows is running in normal mode.
  2. Click on the arrow located to the right of the lock at the bottom of the popup menu symbol
  3. Choose "restart".
  4. I restart the computer, press the F8 key and hold.  I tried at the beginning of the sequence to reboot and after that the light appears on the mouse, but still before the windows logo appears.
  5. Restart the computer in normal mode.
  6. I tried the key down and also tried pressing the F8 key several times both giving the same results without success.
  7. To eliminate the possibility of a bad keyboard, I switched from keyboards with the same results.

  Can you tell me what I am doing wrong?

  You tap f8.

  You can have a F-Lock key in the upper right corner of your keyboard.

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Read the other way at the link above.

  Table of contents > Vista.

  See you soon.

  Mick Murphy - Microsoft partner

• START WINDOWS VISTA ERROR "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation.

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  Hey PeLon416

  If you have problems with the gateway recovery process, you will need to contact Gateway

  It's their recovery process not microsofts

  You may have a hardware problem

  support of bridge at the link below

  http://support.gateway.com/support/default.aspx

  Walter, the time zone traveller

• Error 0 x 00000024 cannot start Windows Vista

  Original title: 0 x 00000024 (0xFFFFFA80061c9530, 0xFFFFFFFF0000102, 0 x 0000000000190444, 0 x 0000000000000000)

  My girlfriends computer crashed last night and when trying to restart it gets just past the windows loading bar and then freezes with a black screen. I tried to restart running and loading safe mode, nothing works. I've used for a disc to boot from vista and which resulted in the freezing of the same in the same place as boot from the hard drive. I managed to get an error report which gave me the following codes:

  0 x 00000024 (0xFFFFFA80061c9530, 0xFFFFFFFF0000102, 0 x 0000000000190444, 0 x 0000000000000000)

  I am reletively in computer science, have always been able to save my computers except when something physical was wrong, but it's something that seems beyond me my DIY. I succumbed in discovering what exactly each of these codes, even though I know that they tell me what the problem is. Any help anyone could give would be appreciated that the whole College career is on the computer, including all the information it needs to complete its high seminar this semester and graduated.

  Hello

  A "Stop: 0 x 00000024" error message occurs when Windows Vista encounters an unrecoverable error when it tries to access an NTFS partition or a volume on the hard disk. As a general rule, you receive a "Stop: 0 x 00000024" error message during Windows Vista Setup when one or more of the following conditions are met:
  The structure of the filesystem or partition is damaged.
  There is a driver compatibility problem. For example, the driver of file system for a program antivirus or other utility can cause this problem.
  To troubleshoot a "Stop: 0 x 00000024" error message when you try to upgrade to Windows Vista, use one or more of the following methods, depending on your situation.

  Attention it is recommended that you perform a backup completes before you implement one of the following methods.

  Method 1:
  Run the CHKDSK program
  To run the CHKDSK (Chkdsk.exe) program, follow these steps:
  Use the Windows Vista DVD to start the computer from Windows Recovery (WinRE). For more information on how to start the Windows recovery, refer to the Microsoft Web site at the following address:
  http://windowshelp.Microsoft.com/Windows/en-us/help/f768809f-ED90-415f-a83f-89b42108b3551033.mspx
  In WinRE, open a command prompt. To do this, follow these steps:
  (a) on the screen to install Windows, select the language to install, time and currency format and keyboard or input method options and then click Next.
  (b) click on repair your computer.
  (c) click the Vista installation you want to repair, and then click Next.

  Note Click on load drivers only if you need to load a driver to access a hard drive.
  (d) click on command prompt.
  (e) at the command prompt, type the following command and press ENTER:
  CHKDSK drive: / r
  Note in this command, drive is the hard disk where you want to install Windows Vista.
  WARNING:
  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
  If Chkdsk.exe does not and does not repair errors on the hard disk where you want to install Windows, run Chkdsk.exe on other NTFS hard drives on the computer. To check the partitions that are configured on the computer, follow these steps:
  At the command prompt, type the following command and press ENTER:
  DiskPart
  At the DISKPART prompt, type the following command and press ENTER:
  Flight list
  Note the hard disk information that is returned.
  At the DISKPART prompt, type the following command and press ENTER:
  output
  At the command prompt, type the following command and press ENTER:
  output

  Method 2: Search for driver problems
  WARNING This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this solution to workaround but are providing this information so that you can implement this workaround at your own discretion solution. Use this workaround at your own risk.

  If you upgrade to Windows Vista, follow these steps:
  (a) install updated disk controller drivers.
  (b) uninstall any antivirus or the antispyware backup programs that monitor the file system for changes.
  (c) try to upgrade to Windows Vista again.

• Compaq Presario SR5130NX: Cannot start Windows Vista after failure - HELP!

  Hello! My building has undergone a complete failure so 4 days ago I used it. Power resumed 3 hours later, but I was not able to log on since.
  
  
  
  
  
  Normally, I turn on my PC, and about 30 seconds later, a window pops up asking you my password. After entering it, the PC come by my office. Now, when I turn on the PC, it brings me to a blue screen with a mouse cursor in the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  When I press F8 during the boot process and choose an option from the window "Advanced Boot Options", I still can't start my computer normally.
  
  
  
  
  
  Here's the "Advanced Boot Options" I tried, after consultation with my brother a little more PC-savvy:
  
  
  
  
  
  1 repair your computer - after I see my black screen that is usual with the words "Microsoft Corporation" under the green bars that scroll from left to right for about 15 seconds, a blue screen appears with the mouse pointer in the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  2 mode safe - while the PC display several files on start up and down, it stops on "Loaded: \windows\system32\drivers\disk.sys" for about 20 seconds, then proceeds to a black screen with the words "Safe Mode" in the 4 corners and the mouse cursor at the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  3 safe mode with network - see "Safe Mode" above.
  
  
  
  
  
  4 safe mode with command prompt - see 'Safe Mode' above.
  
  
  
  
  
  5 last known good Configuration (Advanced) - see "repair your computer" above.
  
  
  
  
  
  6 start Windows normally - see "Repair your computer" above.
  
  
  
  
  
  7 debug mode - see "Repair your computer" above.
  
  
  
  
  
  I downloaded a DVD recovery based on Linux in knopper.net, allowing me to access important files, which I copied from the desktop to an external hard drive (4.1 GB iso file).
  
  
  
  
  
  PC Windows XP of my brother has a recovery disk, but my Windows Vista PC did not come with one. I've seen a few paid versions, but looked resources due to cool weather and free shipping.
  
  
  
  
  
  I can't tell if I have the 23-bit or the 64 bit version of Windows Vista, so I downloaded both versions of an open source sourceforge.NET startup repair, which I burned on 2 DVDs. After you run the startup repair program using two DVD, the diagnostic results have been uploaded online at ubuntu.com for review and technical analysis. Here are the links:
  
  
  
  
  
  http://Paste.Ubuntu.com/16018001/
  
  http://Paste.Ubuntu.com/16019372/
  
  http://Paste.Ubuntu.com/16040380/
  
  
  
  
  
  The last report ended with the words "start managed to fix...".  You can now restart your computer. "But I always encounter a blank screen (black or blue) when I try to log on to my PC.
  
  
  
  
  
  Here are my details of PC, if it is useful:
  
  
  
  
  
  Desktop Compaq Presario SR5130NX
  
  Serial number: [personal information]
  
  Product number: GC667AA
  
  Warranty end date: October 5, 2013 (according to Compaq/HP.com)
  
  
  
  http://support.HP.com/us-en/product/Compaq-Presario-SR5100-desktop-PC-series/3436764
  
  
  
  
  
  Thanks for any help you can provide.

  Hello

  Since you already have KNOPPIX I try Gparted and use it to 'clean up' the score because it will stop in an impure State.

  NTFS

  [1]

  [11]

  NTFS-3 g / important

  GParted will try.

  Also, I would consider the old problem with fat systems, floppy disks etc. which sometimes a copy of sys files from a floppy disk to a hard drive has reactivated a bootable system.

  So, if system files have been damaged, then replace them since a Setup disk.  Because he goes to options, what kind of work.

  https://en.Wikipedia.org/wiki/Windows_Vista_startup_process

  • Windows Boot Manager (Bootmgr.exe)

  • Windows operating system loader (Winload.exe)

  • Recovery of Windows loader (Winresume.exe)

• Cannot start Windows vista 64-bit is not after installing SP1

  When SP1 is installed, it will ask to "restart now" click on that and it not his "disconnect", then moves to step 1 of 3. " arrives at 97% and restarts. When it starts and happens to where windows should load up, it just goes to an error screen that says...

  "Unable to start Windows. A recent hardware or software change might be the problem. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  File: acpi.sys
  Status: 0xc0000098
  "Info: Windows failed to load because a required file is missing or corrupt.

  Now I can put in the disc of windows and repair and it will load and everything is good but not SP1 and if I try to install again, the same acpi.sys error again.

  I changed the power settings for monitar and readers do not turn off if the system is idle for long periods of time. I have reformat the HD does have 2 attacked together but spent the 1 hard drive and changed RAID.  This change has been to try to understand why my computer would hard lock. So far it isn't hard lock now. just can't update vista SP1 now. No update problem when he had 2 hard drives had attacked

  Any help would be great.  THX

  Hello

  Microsoft has released the analysis tool system update to resolve certain conditions that could cause the installation of updates and other software not only not for work. You don't have to manually run this tool. This tool is offered automatically through Windows Update on computers that have a condition that the tool could solve.

  System update readiness tool is available on the Windows Update Web site. To obtain this update, follow these steps:

  1. click on start-> click on Control Panel, and then click Security.

  2. under Windows Update, click check for updates.
  Important This update is available on Windows Update only to computers that have a condition that the tool could solve

  The following files are available for download from the Microsoft Download Center:

  Download the System Update Readiness Tool for Windows Vista (KB947821) package now.

  For more information, see article http://support.microsoft.com/kb/947821

  All the best!

  Diana D D

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot start Windows Vista - ntoskrnl.exe is missing or damaged

  Hello, I am running Windows Vista. When I tried to start today I got an error message saying the ntoskrnl.exe is missing or damaged and should be replaced. How can I do that I can't use my netbook? Im not a geek, any advice would be apreciated, thanks

  Hello

  1. don't you make changes to the computer before the show?
  2. are you able to boot to the desktop?

  I suggest you try the steps from the following link:

  Windows cannot start with the error of the ntoskrnl.exe missing or damaged when the keys are pressed at the start
  http://support.Microsoft.com/kb/2022960

• Cannot start Windows Vista Home Premium. Missing or corrupted system registry file.

  And I don't have the windows installation disc to fix the problem.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• Cannot start Windows Vista after you download updates

  Original title: the last time I got a windows vista download it did.not end now if I turn off my computer it won, t wiyhout restart using a rescue disk also can, t open all files except when I connect

  Last time I had a windows down load it didn, t finished and my computer locked up had to use a rescue disk to start

  Hiartco1993,

  1. do you know what download you tried?

  2. do you receive error messages or error codes?

  3 have you tried booting in safe mode?

  You can first try to start in safe mode and try a system restore and check if it helps.

  Step 1:

  You can try to start in safe mode.

  Check out the link for more information on starting your computer in SafeMode below:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  You can try restoring the system to safe mode.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  You can consult the links for:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/What-is-System-Restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot start Windows Vista

  Hello

  My laptop or laptop has a good light blue screen after a few setting for the display to external display was made by me.

  I tried to play a movie from my laptop to my samsung 40 tv monitor. It does not automatically detect monitor cable is plugged.

  Windows has stopped working probably because changed my setting to 16-bit to 32-bit screen...?

  What should I do in this case?

  Thank you

  Patrick

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  See you soon.

• Cannot start Windows Vista, even dvd installation

  I started my Dell Inspiron 1420 under Windows Vista Home Premium in place and led to a warning screen indicating an error in startup.  As stated, I started from my Vista installation DVD.  I ran the Startup Repair tool, and it failed.  The event log has been as follows:

  Problem event name: StartupRepairV2

  Problem event Signature 01: external Media

  02: 6.0.6001.18000.6.0.6001.18000

  03: 0

  04: 65537

  05: unknown

  06: no Cause root

  07: 0

  08: 2

  09: WrpRepair

  10: 87

  OS version: 6.0.6001.2.1.0.256.1

  Locale ID: 1033

  I then ran the System Restore tool and it failed.  I then ran the Memory Diagnostics tool, and it found no errors.  Given the lack of success, I decided to reformat and reinstall.  I used the Advanced Options in Windows Vista Setup DVD to remove the Partitions, format the drive and install Windows.

  Post installation Windows started successfully the first time but was running slowly.  I tried to download the drivers from the CD of Installation of Dell, but automatic execution failed, and when I tried to copy individual files, it also failed.  I decided to reboot the machine, but instead of Windows, I got a blank screen with white cursor blinking in the upper left corner.  I tried to reboot from the Installation DVD and once the progress opening white Windows files completed bar, I was presented with a black screen and a cursor again.

  Since then, I was not able to start any CD/DVD successfully.  What should I do now?  I am happy to reformat and try again, but I can not even on the screen to do.

  Help!  Please?

  Hello Nick_98,

  If we are hanging up when you use the installation disc, then the installation disc has problems or hardware on the computer problems that must be addressed before moving forward, there

  I advise to use diagnostics provided by your manufacturer to check for hardware problems.

  Please note that if the equipment passes the test, it simply means that no error has been detected it.  If we turn to the top of the sensitivity on the diagnosis, we can find errors.

  Best regards

  Matthew_Ha

• After removing the Tdss rootkit, computer laptop My Windows Vista Home Premium keeps restarting after the connection. __

  I had the Tdss rootkit on my laptop and removed using TDSS Killer of Kasperky. After the reboot, I have connected and saw a box that displays "Please Wait". After 5 to 10 seconds, my computer restarts. After the reboot, it shows options for Windows Vista loading, i.e. the safe mode, safe mode with network. I chose the mode safe mode with networking and everything works fine. The system properties box opens automatically. When I try to boot into normal mode, he repeated restart after the connection. I tried to run a restore of the system into safe mode with networking, but it tells me something about the system restore is in mode offline. I hit a brick wall and don't know what to do next. I don't want to if I have more options to factory default restore.

  The TDSS rootkit is very destructive.  It is not uncommon to make a computer work is not properly after removing it.  I advise you to restore your computer to factory default.  Not only is this the best option, it's the safest option.  I wouldn't consider the computer to be trusted without going through the restore process.  Even if you can be sure that 100% of the infection has been removed, you have no way of knowing what changes the malware made to the settings on your computer, which may be exceptionally vulnerable to future malware attacks.

• Cannot start Windows Vista on Satellite Pro A40

  I haven't used my Satellite Pro A40 for awhile and I'm now greeted with a black BACK screen with an error message saying that Windows XP could not start properly.
  I have had this once before but when I waited so that Windows starts normally it was fine.

  This time he just continues to move toward opening screen windows then the Toshiba screen then back to the black screen again.

  I read somewhere here that now the key 0 when starting may solve the problem, but there is no mention of this in the manual of the A40, and when I tried it on the off-chance that is nothing past.

  Any ideas?
  Help, please!

  Thank you

  Hello

  > I read somewhere here that now the key 0 when starting may solve the problem, but there is no mention of this in the manual of the A40, and when I tried it on the off-chance that is nothing past.

  Don t think that this procedure works on your Pro A40. It is a European series and as much as I know this option (by pressing the 0) is not available on European laptops.
  What you could do is try to start in safe mode by pressing the F8 key immediately after power on.

  She she s not possible to start the operating system using the safe mode then a reinstallation of the new system would be desirable