Cannot take snapshots of suspended after 6 ESXi upgrade

Similar Questions

• Cannot take snapshots

  Hi everyone, hoping to see if there is a solution to this. I have a SCO Unix VM working fine, after doing a P2V and juggle with drivers etc.

  Now on a test office system where I have ESXi 5.0 is installed, I was able to use Veeam to perform a backup.

  After using the same VM, but the only difference is that I have an old NIC crossed to the virtual machine (and on a map server) must not be snapshots (shaded out in the Client) and Veeam fails to take a backup by saying "error creating snapshot: the operation is not allowed in the current state."

  All I can do to take pictures again and therefore get Veeam working again? A pull-out decision of PCI NIC active the problem?

  Hi Aaron,

  Since you are using IO VMdirectpatch you can not take pictures and also you will lose the rest of the features of virtualization.

  • VMotion

  • Storage VMotion

  • FT

  • Add hot appliance

  • Suspend and resume

  • Record and playback

  Reference: http://communities.vmware.com/docs/DOC-11089%20

  Please go through the similar to the VMdirectpath topic thread / passthrough device + backup.

  http://communities.VMware.com/thread/260707

  I hope this helps.

• Cannot access IIS related program after than esxi 6.0 randomly rebooted itself.

  Hello, looking for help. If my only randomly restarted esxi (just upgraded to 5.5 a week ago) 6.0 server. I checked the newspaper and for some reason, he felt that he had to change all my firewall settings. I changed them back what I could say, but for reasons that both my Veeam Monitor Server and my sharepoint server no longer communicate via the corresponding applications. Even locally, I am unable to bring up veeam monitor or sharepoint sites. I get "connection failed for user nt authority system" over and over in the event logs on the server and can communicate with the mssql either part. Has anyone seen this problem? It must be a setting on the esxi server right? Can someone provide parameters to watch, things to try. I tried allowing all ports on the firewall in vsphere but no luck. Thanks for your help.

  Don't know how esxi 6.0 performed error auth, windows NT, but I did a restore to my two servers on the side of the BONE and it solved my problem. So restart must corrupt something Windows because they is not get stopped correctly.

• Cannot create snapshots of error message replica devices

  Greetings,

  I'm currently testing my recovery plans for all of my groups and I get the following error message:

  Cannot create snapshots of the replica devices. (Include a screenshot of the error) By the message, the storage Port cause is not identified, either the storage port information in NFS list is incorrect else check the option "isIP4" in the file ontap_config corresponds to the IP address in the field of the NFS.  Any suggestion? Thanks for all your comments as always!

  OK after doing some reading on the NetApp KB Portal, the problem was related to a firewall policy applied to the LIF configured for NFS traffic. After I change the firewall for data management policy, I could test my recovery plan. Jürgen Vervoort was therefore in the right direction, but it was on the storage level.

• 10 iOS cannot take screenshots

  10 iOS cannot take screenshots

  Hold the power and the "home" button until the Apple Logo appears, let it go and let the boot of the phone upwards. Try again.

• My firefox cannot connect to any network after upgrade to v36 but another browser in same PC ok

  My firefox I just upgrade automatically to v36, but borrowing is no longer able to connect to any web site after reboot. (Chrome and IE has no problem). I have try to disable the proxy and prefetch IP6 and does not help. In the even they, my PC has norton installed but does not have the configuration of the firewall. The upgrade of the software automatically, please provide fix ASAP

  HI andrewcsfan1,
  I understand that Firefox cannot connect to a network after update.

  • Difficulty of problems connecting to websites after Firefox update

  What operating system do you use? What is XP?

• iPhone 5 volume cannot be reduced with (-) button after update to 9.3.2

  Volume cannot be reduced with button after update to 9.3.2

  Can increase the volume with button until the max volume.

  Cannot lower volume in any application that has sound.

  This on the iPhone 5 with iOS 9.3.2

  Try a Reset: press and hold the sleep/wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears. -Note: no data will be lost

• Cannot open the safari link after installing the iOS 9.3

  Cannot open the safari link after installing the iOS 9.3

  This is a common problem and there is currently no permanent solution yet.

  Try turning off JavaScript under settings - Safari - Advanced.

  I think that apple will figure things out soon.

• Cannot record music on ipad after update to IOS 9.3.

  Cannot record music on ipad after update to IOS 9.3. In the view 'now playing' I could tap on the title that opens a window where I could score 1-5 stars. Now by tapping on the title just changes the display of the album. What can I do? I would be very unfortunate if I could rate is no longer my music while listening to it on the IPad. The 1-5 star rating still works in Itunes, but it is a great help for me. Thanks for help.

  Try this below the steps it will work!

  You must press the title to bring up the option enter a star...

  Once it is visible, touching it will bring back the title most of the time and allow entry only part of the time.

  "need to press the title of music playback and the rating stars will appear."

• Cannot take pictures iPhone 5s and hidden folders

  Husband has iPhone 5s, and it cannot take any more pictures with a storage in full.  Sometimes he wanted to completely import/erase photos off phone, sometimes import but not erase.  Apparently (according to iTunes when connected), it has an insane amount of photos stored on the phone SOMEWHERE, but his camera is COMPLETELY EMPTY! When you connect to the computer again, and she asks if we want to import photos, we say Yes (just for fun now), and he says there is still no new pictures to import. (for a good reason because he can't take pictures and the film file is empty).

  How to access or import these photos hidden this iTunes dashboard says that he has, then he can use his camera again? They must be stored somewhere on the motherboard right?  BTW his iPhone isn't a year old, but either.  Never had this problem before with sound or all other iPhones, so we are baffled.  It won't restore to factory settings due to other information that he does not want to lose in the process, even if we backed the phone up to iCloud and computer via iTunes.  ANY SUGGESTIONS PLEASE? DOES ANYONE ELSE HAVE THIS PROBLEM?

  Thank you!

  iPhone 5 s

  The images are probably corrupt and occupation of space while not clearly rendered like pictures and available in the Photos app

  This article can help

  1. What is others and what I can do about it - CSA

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

   

• Windows Update has encountered an error and cannot display the requested page after that I click on express update.

  Original title: page Web update always comes back also cannot display the Web page after that I click on express update.

  Page Web I cannot update. Obviolsy I have access to the internet. I tried this several times. I have reintalled windows and I need update Inorder for programs work. Help. I have IE8. XP pro74 free concerts on drive c 400gigs e and d

  Is this the same computer as in this thread previous & abandoned of yours? -Online http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/remote-desktop-wont-connect-win-7-to-win-xp-pro/d0995287-356b-4e1f-aa51-1813625b4014

• Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. There is no error code displayed

  Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. The error number is 0x8024400A.

  Should I turn off my Anti virus software is what could be stopping my updates? some sites would sugest that I use Kaspersky 2012, if that's the case, then why do all my other programs that are installed to date OK?

  Hello

  Check your level of service current pack...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Examine what is listed in the system: section

  If there is no service pack designated first level you must download SP2 from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28

  .. .and then run the downloaded program to install SP2.

  Once you have done this, or if you were already in service pack 1, 1a or 2, then install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  For both of the above, you can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.

  So try and get up-to-date with the Windows updates.

  Tricky

• RUNDLL - error loading c:\windows\wrypap.dll - specified module cannot be found, this happens after the windows xp registry.

  RUNDLL - error loading c:\windows\wrypap.dll - specified module cannot be found, this happens after windows xp registry

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.

  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.

  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• New hard drive try to install Windows vista but it keep suspended after 60% and collapsed them

  New hard drive try to install Windows vista, but it keep suspended after 60% collapsed I tried a few time every time I had to wait for 5 hours, but the same thing happen again and again can help you pleaaaaaaaaaaaaase

  Monastir,

  What happens when it stops it is have a Sata driver. It is on the drivers cd you received with your computer. You can also start the computer and press F2 to enter the bios. From there down to Configuration system - SATA Operation and change this to ATA. It is located to AHCI. Save the changes and restart the installation. Once you have loaded Windows and drivers installed, you will need to go back to AHCI.

  Dell-Jesse