Pilot LabVIEW 2010 FPGA Xilinx SPARTAN 3 Board starting

Similar Questions

• 64-bit driver for LabVIEW FPGA Xilinx SPARTAN 2009 3rd starting Board

  My dear I need this add-on

  We I install the module i hava, it seems

  Support for LabVIEW for Spartan-3E (incompatible with the 64-bit platform)
  is their a supprt 64-bit version?

  Best regards

  Hello mangood,.

  There is unfortunately no way to use the driver on 64-bit Windows. You will need to use the 32-bit operating system to use the Spartans drivers. Sorry for the inconvenience.

• Pilot LabVIEW 8.6 and FPGA Xilinx SPARTAN 3 departure Board

  Is the new LabVIEW compatible driver FPGA Xilinx SPARTAN version 8.6 3rd starting Board?

  I mean the download found here...

  http://digital.NI.com/express.nsf/bycode/Spartan3E?OpenDocument&lang=en&node=seminar_US

  Tutu

  Spartan-3F for LV FPGA 8.6 support is under development.  Contact your engineer commercial ground NOR or Sapper University if you will need a copy of the draft.

  Reid

• LabVIEW 2010 FPGA: problem with the mean and the variance Subvi

  The Subvi 'Average, Variance and standard deviation' seems to not work properly. The calculation of the average value is ok but std and variance are bad and the results change with representation in an unexpected way. Everyone knows about this problem? Is there a problem with the use of this function?

  Thank you

  Andrea

  Hello Andrea,

  Here is a test for the configuration of your VI (entered I16, 16 samples), saved in LabVIEW 2010 SP1 and the new Subvi. It is relatively simple to adapt it to other configurations, but it does not reconfigure several nodes and constants on the diagram. Let me know if it will work for you.

  Kind regards

  Jim

• Error compiling 2010 FPGA - TclTasklC:project_028: unknown property value

  Hi, I use a cRIO 9075 and a NI 9211 to measure the temperature to a project very busy with. Whenever I have try the code for compilation of t I have a compilation error which read as follows:

  Compilation failed due to an error of Xilinx.

  Details:

  ERROR: TclTasksC: project_028:Unknown 'spartan6' property value specified for "PROP_DevFamily."

  Can someone help me on how to solve this error, I'm using LabVIEW 2010 FPGA and Xilinx 11.5

  Concerning

  You are welcome! I am happy to know that everything works correctly!

  Happy Friday!

  Jordan

• Need drivers Labview 8.5 for Spartan 3rd starting Board

  Hello

  Could someone put a link to temporary download for pilots Labview 8.5 for the 3rd Spartan (Digilent) departure Board? My research project is still using Labview 8.5 and downloadable drivers are now for Labview 8.5 and 2009/2010. Thank you!

  Kind regards

  DFD

  * Bump *.

  Can an engineer OR help me with this? Thank you.

  Kind regards

  DFD

• Compilation of Xilinx not installed labview 2015 FPGA tools

  Hello

  I just installed Labview 2015 + FPGA Module on my computer with an older version of Labview 8.6.

  When I compile a labview FPGA project 2015 I got this error message "year error occurred while communicating with the server compilation" and warning "tools of Compilation of Xilinx not installed."

  I can assure you that my server of 2015 lunch perfectly and I installed everything correctly. I assure that it is a conflict between labview 8.6 and 2015 therefore uninstalled the older one.

  The problem is my build configuration is set to Xilinx 10.1 (which should be 14.7) and there is no way to change this.

  After looking around I found that Labview looking for best compilation tools then maybe this is not the problem

  Is there something I missed?

  Kind regards

  Hello

  I found the source of the problem. The FPGA, I used was based on a FPGA Virtex II matrix that is not compatible with this version of the build tools.

  Thanks for helping me!

• LabVIEW 2010 E4406 1XEVDO/CDMA2k pilot

  We recently bought labview 2010. I installed the drivers for Agilent E4406A VSA but it only installed the drivers for the GSM and WCDMA. Our product is running on CDMA2K (1xRTT) and EVDO-RA. How can I get labview 2010 drivers for it so that I can controll and acquire the data of my instrumnet. I was previously using Labview 8.6 and its drivers worked well and all of the code I have already came out on 8.6 drivers are great. The drivers that I downloaded from labview instrument driver 2010 search are Agilent PSA (W-CDMA) series and Agilent PSA (GSM). No other options for EVDO or CDMA2k appear. Help, please.

  Shad

  The dll can be anywhere on your system, perhaps in the system of windows or system32 directory

• FPGA Xilinx compilation failed. Access to the path 'C:\NIFPGA\corecache\activity.log' is denied.

  I just has my cRIO.  I installed all necessary software and drivers and have written a VI mode FPGA.  However, when I try to compile the code, I get the error of follow-up message (see attachment).  I contacted the support NEITHER and they have been unable to solve this problem at the moment.

  The engineer NOR gave me the following advice:

  ' 1. start the registry editor by selecting Start ' Run and then entering the window run regedit.
  2. press the Enter key to open the editor.
  3. find the following registry key in the path below:
  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\National Instruments\LabVIEW\11.0\AddOns\FPGA\CompilerPath_Xilinx12_4
  * the Wow6432Node is not correct in all cases. on my PC, you go to HKEY_LOCAL_MACHINE\SOFTWARE. National Instruments\LabVIEW\11.0\AddOns\FPGA\CompilerPath_Xilinx12_4
  4. on the data tab, you should see the path associated with your CompilerPath_Xilinx12_4. Please confirm that it is linked to the C:\NIFGPA\programs\Xilinx12_4
  If you Xilinx 11.5 installed, make sure it is also bound to the correct path.
  5. If you have previous versions of LabVIEW installed, you will need to go to these versions as well. For example if you have LabVIEW 2010 is installed, please, go to 10.0\AddOns\FPGA
  Make sure that the CompilerPath_Xilinx12_4 or the CompilerPath_Xilinx11_5 or the CompilerPath_Xilinx10_1 are all properly placed under the drive C as seen above in step 4.
  (6) make sure that the "Working Directory" under LabVIEW 11.0 has the right path of C:\NIFPGA\
  (7) after that, close the registry editor and navigate to where is the worker to compile the FPGA. By default, it should be here: C:\Program Files (x 86) \National Instruments\FPGA\CompileWorker
  (8) here open the document "WorkerRootDirectory.txt" and change the path. Make sure that it is pointing to the C drive.
  (9) save and close the file. Restart your computer.

  It was already correct and still impossible to compile.

  Usually, a "access to the path... denied." error comes from the permissions of the user.

  What operating system do you use?

  You use this tool from an administrator account?

  Is there a security policy on your computer which determines the permissions and user rights?

  Is it possible to run LabVIEW as an administrator?  (e.g. under Windows 7, you right-click on LabVIEW.exe and choose 'Run as administrator'.)

  Best regards

• Running the latest Labview 2010 on new computers (Windows 7) but who have the older/more older material NI ELVIS

  We are running the latest Labview 2010 on new computers (Windows 7) but have more older/more old material NI ELVIS (NI ELVIS I?).

  LabVIEW works very well and the device drivers are installed.

  What NI ELVIS software move us?

  The latest version indicates that it is for ELVIS II and III hardware.

  Thank you

  Hi Tom,

  I'm sorry, I read your first post completely backward.  It's the pilot , you should try.  Sorry for the confusion!

  Kind regards

• You use HP 4156 instrument with Labview 2010 in Windows 7

  We recently bought Labview 2010 for Windows 7 and some software porting, we had on Labview 6.  These programs of control of two instruments: HP (Agilent) 4156A parameter Analyzer and the Keithley 7001 switch system.  When I looked for the drivers of instruments for these two systems, they were no longer available for Labview 2009 and associated NI-VISA 3.2 driver is not compatible with Windows 7.  You have any suggestions on how we can run Labview 2010 on Windows 7 with the ch (Agilent) 4156 A and Keithley 7001?

  A pilot in 2009 can be loaded in 2010 and this is the minimum VISA version, you can use. You need not even the driver of instruments most recent. Just run your existing code.

• [FPGA] xilinx ise?

  Hello

  I am trying to configure a component LabVIEW and xilinx coregen won't let me because «is not installed with labview fpga xilinx ise» I can't find a proper download of NOR. Is this a question expected? There is of course the xilinx website, but do I need a specific version and how can I say? The target FPGA's Virtex-6 LX195T if that's a factor. LabVIEW 2013.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/210629

  Hey, ToeCutter,.

  You have the 2013 LabVIEW FPGA Module Xilinx tools installed locally? Who has Xilinx coregen, which is what you will need to configure their intellectual property. If you are some intellectual from the LabVIEW FPGA palette, it should "work".

• The PSC-2000 is programmable with LabVIEW 2010 SP1 / Real Time 10.0.1?

  I have a PSC-2000 camera I want to use for a small project.  I see on the site OR that it is said»

• "Support for LabVIEW Real-time 8.5.1 and earlier" and "Support for Windows Vista and earlier versions.  It means that I can not use the latest version of LabVIEW (2010 SP1) with time real (version 10.0.1) running on a Windows 7 computer?  If not, what version of LabVIEW, real-time and operating system do I need?

When I tried to add a new target under LabVIEW 2010 SP1, the PSC-2000 was not among the choices.

As the support NOR documents indicate, you need LV version 8.5.1 or earlier to program the cFP-20xx devices family.  Version 8.5.1 of LabVIEW does not work under Win7.  You will need Windows Vista or something earlier like XP.

• Is there a Module NXT for LabVIEW 2010

  Is there a Module NXT for LabVIEW 2010?  If not, are there plans to bring a available and if so, when?

  Hello

  I found a link to a download for the module 2010 here.

  I hope this helps.

• I get the error indicating the niajel.dll missing for HSDIO in labVIEW 2010, can someone help how to solve this problem.

  I'm using LabVIEW 2010 and installed the drivers from device LV2010 and try to use the HSDIO functions, while setting the HSDIO function on the block diagram showing niajel.dll is missing, can someone help me fix this bug.

  I tried to uninstall and install not able to set several times.

  Hello. niajel.dll corresponds to the NOR-TClk, although NEITHER-HSDIO does not specifically use it. You use certain functions TClk?

  Also, what other PXI device driver are installed on the system? Could you give a report on the MAX system?