cannot update June 8, 2012 all the day error 0x800042D fix is told that it is fixed, but it is not

Similar Questions

• The following updates 5 will be "installed successfully" but reappear on loans for the installation of all the days of updates: kb2600217, kb2533525, Ko 2468871, KB2656351, KB87367.

  Hey all,.

  The following updates 5 will be "installed successfully" but reappear on loans for the installation of all the days of updates: KB2600217, KB2533525, KB2468871, KB2656351 and KB87367. Any advice on how to fix this?

  TIP: See the first, 4 specific sub-section of .NET Framework of the method of resolution 2 (only!) on this page-online http://support.microsoft.com/kb/976982

• I just downloaded updates for 2014 PS on mac OS 10.7.5. Now, he opens all the images - error message cannot open because the open parts are incorrect?

  I just downloaded updates for 2014 PS on mac OS 10.7.5. Now, he opens all the images - error message cannot open because the open parts are incorrect?

  Hi Akash.

  Download Installer Camera Raw and it seems to have solved the problem.

  Thanks for your time.

  Concerning

  Peter DeBeer

• Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. There is no error code displayed

  Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. The error number is 0x8024400A.

  Should I turn off my Anti virus software is what could be stopping my updates? some sites would sugest that I use Kaspersky 2012, if that's the case, then why do all my other programs that are installed to date OK?

  Hello

  Check your level of service current pack...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Examine what is listed in the system: section

  If there is no service pack designated first level you must download SP2 from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28

  .. .and then run the downloaded program to install SP2.

  Once you have done this, or if you were already in service pack 1, 1a or 2, then install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  For both of the above, you can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.

  So try and get up-to-date with the Windows updates.

  Tricky

• Firefox has been well until the last updated, now it crashes all the time crazy

  It never crashed until the 9.1 update, now it just all the time, block sites, stops just no warning, nothing.

  See:

  • http://KB.mozillazine.org/Firefox_crashes
  • https://support.Mozilla.org/KB/Firefox+crashes

• I've just updated and I lost my reading later work and all the articles I've been saving. That's happened?

  I've just updated and I lost my reading later work and all the articles I've been saving. That's happened? I'm very unhappy about it. Help, please.

  Said its compatibility with the 4.0.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/read-it-later/

• Update 2.3.3 (all THE KITS) x10a and x10i

  Update 2.3.3 (all THE KITS) x10a and x10i

  http://www.topsony.com/Forum/local_links.php?CATID=4556

  Download FlashTool

  http://Forum.xda-developers.com/showthread.php?t=920746

  or

  http://Androxyde.github.com/Flashtool/

  an even easier alternative

  Download the app, upload it to your SD card

  Download Apk Manager

  W251bGwsMSwxLDEsImNvbS5tYWdtYW1vYmlsZS5hcHAuYXBraW5zdGFsbGVyIl0.

  Open 'Apk Manager' and here select the applications that you wan't to install

  Let me make it simpler

  Download the apk on your computer, send it by e-mail, make sure that you send it to your Gmail

  now on your phone

  go to settings-> applications-> check unknown sources

  wait for the mail, once you get the message, open it, and instead of download the attachment it will install it, voila, done

  Use one of these links to download the

  Backup & restore app

  http://Forum.xda-developers.com/showthread.php?t=1193802

  or

  http://www.Elita-clan.com/downloads/backup_and_restore_v010935.APK

  http://www.Elita-clan.com/downloads/backup_and_restore_v010935.APKor
  http://www.mediafire.com/?1n07llajeaoo03y

• Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Error 43 https://forums.adobe.com/thread/2070909

• My creative cloud no longer works. When I try to reinstall, I get the message "AAM cannot initialize. I tried all the instructions but it still does not work. Robert

  My creative cloud no longer works. When I try to reinstall, I get the message "AAM cannot initialize. I tried all the instructions but it still does not work. Robert

  Could you please mention the operating system?

• Function to retrieve all the days of the previous month.

  Hello
  
  Yes, it's a monthly report, I received the task at hand.
  
  So, all I need is every day of the previous month (even if there is no data for that day)
  
  I was instructed to use the following code, but it does not return a value any:
  

  DECLARE
     CURSOR CUR_LAST_DAY IS
        SELECT TO_CHAR (LAST_DAY (ADD_MONTHS (SYSDATE, -1) ), 'DD')
          FROM DUAL;
   
     VVA_LAST_DAY   VARCHAR2 (2);
     --
     VNU_JOUR       NUMBER       := 0;
  BEGIN
     OPEN CUR_LAST_DAY;
   
     FETCH CUR_LAST_DAY
      INTO VVA_LAST_DAY;
   
     CLOSE CUR_LAST_DAY;
   
     WHILE VNU_JOUR <= TO_NUMBER (VVA_LAST_DAY) - 1
     LOOP
        VNU_JOUR := VNU_JOUR + 1;
     END LOOP;
  END;
  --CLOSE CUR_LAST_DAY
  --DEALLOCATE CUR_LAST_DAY

  -----
  On the other end, I developed this code:
  

  SELECT TO_CHAR(SYSDATE,'dd')
  FROM DUAL
  WHERE TO_CHAR(SYSDATE,'dd') >= to_char(to_date(to_char(ADD_MONTHS(SYSDATE, -1),'yyyy-mm')||'-01'),'yyyy-mm-dd')
  AND TO_CHAR(SYSDATE,'dd') < to_char(LAST_DAY(to_date(to_date(to_char(ADD_MONTHS(SYSDATE, -1),'yyyy-mm')||'-01'),'yyyy-mm-dd')));

  Which returns a null value. :(
  
  Concerning

  Hello
  You want to retrieve whole days of the month last query... So here's...

  SELECT
  TO_DATE(LEVEL||'-'||TO_CHAR(ADD_MONTHS(SYSDATE,-1),'MON-YY'),'DD-MON-YY') COMP_DATE,
  TO_CHAR(TO_DATE(LEVEL||'-'||TO_CHAR(ADD_MONTHS(SYSDATE,-1),'MON-YY'),'DD-MON-YY'),'DD') ONLY_DD,
  TO_CHAR(TO_DATE(LEVEL||'-'||TO_CHAR(ADD_MONTHS(SYSDATE,-1),'MON-YY'),'DD-MON-YY'),'MM') ONLY_MM,
  TO_CHAR(TO_DATE(LEVEL||'-'||TO_CHAR(ADD_MONTHS(SYSDATE,-1),'MON-YY'),'DD-MON-YY'),'YY') ONLY_YY
  FROM DUAL
  CONNECT BY LEVEL <= TO_NUMBER(TO_CHAR(LAST_DAY(ADD_MONTHS(SYSDATE,-1)),'DD'))
  

  I'm not at the machine database so not tested.

  But one thing do not forget that this forum only for reports, it is a separate SQL and pl/sql instance.
  Function to retrieve all the days of the previous month.

  -Clément

  Published by: Graham on April 22, 2010 22:53
  Spelling error

• In all the hearts of Windows games, it seems that they do not know the rules. The Queen of Spades is just like a heart in the real rules

  In all the hearts of Windows games, it seems that they do not know the rules.  The Queen of Spades is just like a heart in the real rules. I don't have to play the Queen.  If hearts have been broken, and all I have left is some hearts and the Queen of Spades, I can play a weak heart rather than being forced to play the Queen.  The windows game apparently does not know this rule.

  original title: rules of hearts

  Hello

  Actually if the Queen of Spades breaks hearts and cannot therefore be considered a heart
  is optional. The basic rule is that the Queen of Spades does not break hearts and must be conducted
  If a player has the Queen of spades and still hearts if hearts have been broken.

  My preferences are the Queen of Spades or a heart can be played on the 1st round Sub in the Clubs.
  And the Queen of Spades does not break the hearts and must be conducted if only he and hearts are
  left in the hands and hearts have not been broken. Those who make for much more difficult game
  MY HUMBLE OPINION.

  Hearts
  http://www.Pagat.com/reverse/hearts.html

  Hearts, the rules
  http://www.toycrossing.com/hearts/basic-rules.shtml

  Hearts
  http://en.Wikipedia.org/wiki/hearts

  Hearts
  http://www.kemenel.org/cards/hearts.php

  Plays in the heart and stings for years, but the bridge is even more fun.

  Bridge Base online - play for free at all levels (beginner to the World Champions and yes the world
  Champions play there - it has same vugraphs live tournaments around the world - free.)
  http://www.bridgebase.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• When you try to update Windows XP, I get the message: error number: 0 x 80245001

  When you try to update Windows XP, I get the message: error number: 0 x 80245001

  Hello

  If you have configured the installation of the automatic update of your computer, the computer downloads the files necessary for the installation of Windows updates in the background and records them in certain folders on your computer. During installation, these downloaded files are extracted by the requirement by the services of update running on the computer.

  The error you are getting means that some of these extracted files required by Windows Update have been damaged. Now, in order to solve the problem better, we need more information about the computer that has the problem. José asked a few questions about this computer in the first reply to your message, it will be very useful if you could answer these questions.

  Here is some important information that we need:

  1. What is the level of service pack installed on your computer?
  (Click the Start button, click run, type winver, and press Enter to know that information)

  2. what update failed to install with this particular error code?
  (Please refer to the method 1: search for the installation error code in the Windows Update troubleshooting tool section of this article to learn how to check your update history to find this information)

  In the meantime, you can follow these steps on the computer and see if that helps:

  Note: These steps will give the files associated with Windows Update in your computer. Perform these steps would be clear Windows Update history on the computer.

  1. click on Start, click run , and then type Services.msc in the run box and press ENTER. This should open the windows of Services for you.

  2. then find the following three services in the list of Services and stop them (by clicking on it and click on stop) one by one:

  Automatic update service

  (BITS) Background Intelligent Transfer Service

  Cryptographic services

  3. open Windows Explorer and navigate to the following location:

  C:\Windows\

  Rename the folder C:\Windows\SoftwareDistribution in SoftwareDistribution.old

  4. go to the following location:

  C:\Windows\System32\

  Rename the Catroot2 in Catroot2.old folder

  (be careful here, do not rename the C:\windows\system32\catroot folder, you must rename the Catroot2 folder only)

  5. now go back to the Services window and start the services of three you had stopped earlier.

  Now, close all open windows, restart the computer and try updates and install them. If it fails again, please answer with the information that we requested.

  I hope that the information I provide here helps you. If you still need assistance, we know. We are happy to be of assistance.

• I am trying to update Windows and I get the 0x080072F8F error code

  I'm trying to update Windows and I get the 0x80072F8F error code.  I tried to set the time, but that did not help.  I unchecked the revocation of the certificate and that did not help.  I can't go beyond a step at the entrance to .dll.  The one on the list has worked but when I tried as wintrust.dll he asks me what program to use to open this and others.  I even downloaded and bought RegCurePro, but which is not made and will ask for my money back because he did what he was supposed to.  Can I PLEASE get help on this?

  How many copies of Windows that you downloaded?

  First of all, I would like to inform you that only one copy of Windows can be installed and activated on a single computer.

  Follow the steps below to solve the problem;

  
  Method 1: Verify that your Internet connection is working

  This method is rated: moderately easy.

  To run this method, follow these steps:

  (a) click Start and then click Help and Support.
  (b) in the search help box or in the search online help box, type troubleshoot network and Internet connection problems, and then click Search Help.
  (c) in the list of topics, click on solve the network and Internet connection problems.
  (d) click the link that best describes the problem you are experiencing.
  (e) follow the suggestions to solve the problem you are experiencing.
  (f) when you are done, follow the steps in method B to reactivate Windows 7.

  If this method does not work for you, go to method 2.

  
  Method 2: Activate Windows 7 using the automated telephone system

  This method is rated: easy.

  To run this method, follow these steps:

  (a) click Start, and then click computer.
  (b) click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation section.
  (c) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (d) click on show me other ways to activate.
  (e) click on use the automated telephone and then follow the instructions that are provided.

  
  Method 3:

  Reset your TCP/IP stack

  (a) click Start

  (b) type in the box search command

  (c) right click command and select run as administrator

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

• Cannot open the title, errors have been encountered at that point.

  Cannot open the title, errors have been encountered at that point. bought 3 Google books give all 3, same problem, ordered same title on one of Kobo store and have the same problem. No problem with no DRM products or small book DRM I bought. With the help of windows 10.

  And what error message you get exactly?

• I was handed this software this morning which is installed at the end of the day and I have never delt with cloud based adobe installation, I created the package this morning and have it installed on a machine but I'm not sure how to enable it

  I was handed this software this morning which is installed at the end of the day and I have never delt with cloud based adobe installation, I created the package this morning and have it installed on a machine but I'm not sure how to enable it

  Creative cloud learn & support

  http://helpx.Adobe.com/creative-cloud.html

  Cloud creation help / install, update or uninstall applications

  http://helpx.Adobe.com/creative-cloud/help/install-apps.html