cannot update the drivers, cannot conect to the internet with them

Similar Questions

• Cannot access the internet with WRT54G hung Hughsnet Satellite HN9000 modem

  I tried to configure my router to work with my Hughesnet HN9000 satellite modem WRT54G and my desktop tray.  I have a Gateway PC and am using Windows XP. I had worked in the past but came out the router for a few months when my portable wireless is dead. Now, I can not the desktop computer to access the internet with the router in place so I can set it up. The cables are all plugged in right. Cable from the modem to the internet port on the router and the Router 1 port Ethernet cable or 4 for desktop.  I cycled all over and outside. I can access the internet fine if I have the modem connected directly to my computer so I know that I have an internet connection. Hughsnet says it's the router. Because it is out of warranty, I can't get any help from Lynksis. I ran the set up disk Lynksis. I suspect that error messages I receive it has something to do with the IP address. But if I can't access the internet how can I do anything with the IP address of the router?  I'm not very experienced when it comes to the routers and network settings. Anyone has any comments that could help. I should be able to figure it all out if I can get just the router connected to the internet. . Thank you...

  Thanks, I found the problem. The Ehernet cable plug was defective. It would work on the Satellite modem, but not the router because of the localities of diffétent and different stress on the card. Changed the cable and everything works fine now.  Thank you.

• E531 update the Bios with WIndows 10 installed?

  Is it possible to update the BIOS with 10 Windows installed on E531?

  I don't see W7, W8, and XP

  Yet once, have solved this problem, I thought I would share with others who may have the same or similar issues.

  I was able to update the BIOS on my Windows 10 install with upgrade download BIOS in Windows 8. Simply install as you normally would, and be patient for the machine to install. Installation BIOS itself is a little funky; I saw the screen go completely white for a while without message about progress or anything like that. But ultimately it ends and works well.

• Impossible to go to the internet with internet explore after a security update

  Hi all

  for some time now, I have some problems with the security update. (I don't have the butI Kbnumero it can search if you need to) I searched many forums, but the solutions does not work

  I'll show you a quick example of what I live:

  The windows update say that there are some new updates. (my internet works)

  I have install and restart my computer.

  Now, I can either go to the internet with internet explore or even google chrome. I can see my e-mail with outlook and I know when there is a few new updates.

  I do a system restore to the day before (where it works fine)

  I have check the update that is causing all the trouble and I turn it off.

  For now, it is the only solution for you that I found.

  I hope you can help me.

  If you need more information, just ask :)

  You can try to uninstall the update 974455 that came out last Tuesday, removing it seems to have resolved other

• I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code.

  I need help to activate my computer but I don't have the code. I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code. I tried to contact the guy but he won't answer. Is it possible to check the activation without the code? I need help and do not want to pay a hundred dollars more.

  Is there a COA sticker that is attached to the machine?

  If so, check to see what edition and version of Windows machine is licensed to:

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  Also:

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• How can I update the rubrics with WebServices?

  How can I update the rubrics with WebServices?

  /Anyone/ has some success with this?

  It becomes important to our business objectives in order to solve the problems within the control elements.

  I can't enter the number of line by line in order to uniquely identify it. How can I get that number, so I can send it with xml "update"?

  A little nudge in the right direction would be much appreciated.

  Aaron.

  You must use a field on the form as the one on the line items, NOT the line number that appears in the journal of the line item. If I understand correctly, the LineItemIdentifier can be any field on the form, even the short description. It is best if you know you will use web services to update the line items, you add a (potentially hidden) field to the form and fill that with unique values when positions are created. If you are working with existing elements of line, then you must choose a field that will be usually unique within a single record and hope, you don't have a lot of duplicates.

• Insert/update the column with the clob data type

  Hi all

  ORCL Version: 11g.

  I have a table with the clob data type.

  Test12

  (col1 clob);

  I'm trying to insert/update to update the column with more than 4000 characters.

  But due to the limitation of tank 4000, I could not Insert/Update.

  Need your help in resolving this issue.

  THX

  Rod.

  The limit of 4000 characters is incorrect.  That pertains only to the varchar2 data type.  A clob can hold more than 4 G.

  Here is an example that shows how to insert it, I found...

  Otherwise, here is a way 'dirty' to do.

  insert into your_table (COLA, COLB)

  values

  (PRIMARY_KEY, PART 1 OF DATA)

  ;

  Update your_table

  Define COLB = COLB | PART 2 OF BIG DATA

  where COLA = PRIMARY_KEY;

  Update your_table

  Define COLB = COLB | PART 3 OF BIG DATA

  where COLA = PRIMARY_KEY;

  .. and so on...

  I don't know that I personally recommend the second style...  But he could do the job.

• I can ONLY connect to the internet with IE7 and Outlook Express

  I have Win XP SP3, home wired network, Netgear router, cable internet, Lenovo desktop.
  I can run IE 7 and Outlook Express and connect to the internet very well with these.  However, I can not connect using FireFox.  Windows Update returns an error and does NOT connect to scan my computer and display the necessary updates.  I just installed tax program this year HR CD block and it is unable to connect to internet to download the updates.  I used IE7 to go to the web site of the tax program to download the update manually, but it doesn't connect either.  I also can't complete installation OF Adobe (Digital Editions) program because it must connect to the internet in order to make a registration.

  I have disabled the Windows Firewall, do not have a configured proxy.  So, I can browse the internet with IE7 and get email with Outlook express.  I went on the site from Google Chrome to try to download it and install it that (using IE7 of course), but after I press the "Download" button, IE7 says that it cannot connect to perform the download.

  I scanned this forum and not seen similar symptoms that would allow me to reach a solution.  Everyone knows about this issue and how to resolve?

  P.S. I have two other laptops Win XP which CAN completely connect to internet with IE and Firefox via the same router and the modem cable.

  I tried trojan remover and none of the things in the menu utils found any problems.

  But it turns out that my problem was a hidden/partial copy of Symantec Client Firewall that I thought was deleted.  Over the months some programs had been updated and Symantec didn't know about them, so it was blocking their access: FROM Adobe, HR Block, IE8, Firefox, etc.  Given that I have not seen it listed in the start menu and it was not listed in Add/Remove Programs, I didn't have to try to remove it.  And it was not poping up to tell me of a new program attempts to access the Internet.

  I used the Symantec tool to remove all THE stuff of Symantec and it cleared up my connection problems.  I then reinstalled Symantec Client Security (antivirus and firewall) and turned off the Windows Firewall.

• How to access Windows 8 PC on the Internet with remote desktop connection?

  Hello

  Can someone tell me how to access Windows 8 PC on the Internet with remote desktop connection?

  I'm good with the software and I have used many Microsoft software since the 1980s. So I like Microsoft products, but since they have outsourced their tech support, you can't support quality even if you pay for it. I followed all the instructions in the Windows 8 will help about DRC setting screens, but I can't connect unless I'm on the same home network. Here are the details:

  I have a desktop PC with Windows 8 Pro and I have authorized the DRC. I tried two settings in system properties:

  1. Allow connections to this computer remotely.
  2. That allow the connection of computers running Office remotely with authentication NLA.

  I also turned on both private and Public Windows Firewall settings > allow an App or feature through Windows Firewall.

  I have installation then DRC to my laptop with Windows 8 (standard edition, not the Pro version). I have a DRC using the full name of the computer and other DRC using the static IP address for my ISP Desktop connection.

  I use the user account administrator Windows for connections of DRC of the laptop.

  I cannot get this to work on the Internet from a location outside my house with another ISP connection. The only way it works if I'm uncomfortable with the laptop using the same network home.

  I called Dell tech support and it is always useless and just a more aggravating waste of an hour to talk to their support of technique outsourced in India (who barely even understand English) and then they hang up the phone as it was supposed to be disconnected. I also called Microsoft support and lost more than an hour to speak to their outsourced tech support in the Philippines (and as support of the India, they hang up or 'disconnect' when they cannot answer your question and they go account learn you more about Windows while they do). U.S. tech companies use AMERICANS more for their technical support so their customers can get people who actually care about doing a good job and can actually understand English?

  So if someone who knows using Windows 8 for DRC on the Internet has some tips, then it would be greatly appreciated.

  Thank you!!

  P.S. If anyone is offended by my comments about the ugly, incompetent, stupid providing "technical support" in India or the Philippines - Nevermind! You go ahead and waste hours of your time talking to some Morón in these countries, who barely understands English and then 'disconnects' the call when they know that you realize that they are clueless and have all the answers.

  Take a look at no - IP.com or dyndns.com, and then use your host.domain:3389 of no.-ip/dynDNS or run RelaVNc SErver that is running on port 5900 by default.  Server options allow you to change the port as well if necessary.

• Unable to connect to the internet with Foxfire. Can do with Internet Exporer

  I've been using Foxfire. After an update I can no longer connect to the internet with Foxfire. IE can connect.

  Firefox is the name. Foxfire is a bio-luminescent fungus.
  
  http://en.Wikipedia.org/wiki/Foxfire _ (bioluminescence)

  See this support article - difficulty of problems connecting to websites after Firefox update

• computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

  Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

  Hello

  Thank you for the update.

  This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

  You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

  Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• try to get on the internet with my new dongle a message continues to say that I have security certificate errors

  Dongle doesn't work, get errors certificate on the screen

  Hi I have a pc, and when I try to get on the internet with my new dongle, a message repeat myself that I have security certificate errors, so I can't get on the net to fix and I don't know how to resolve this, the pc was origanally used for a modem by my sister. Does anyone know how to solve this problem.

  Hello

  1. What is the brand and model of the dongle?

  2. have you installed the drivers from the dongle?

  If this is not the case, the same install from the manufacturer's Web site.

  I suggest you to contact or visit the site of the factory to install drivers and check if that helps.

  I hope this helps.

• Why can't I connect to the internet with Firefox with HP photo?

  When Im on the internet (with Firefox) and when I run HP photosmart... It will not open it to the internet so I can order prints online... I have ge an error saying... no internet connection... do not understand this... Help

  Thank you... but I finally goes back to a bad cable power cord printer... now, I just need to find a store to replace it... forget HP. There web site is no longer hostile user... will never buy one of there products... only helping you get from them? It is money... so thank you once again...

• Tecra M3 has ceased to connect to the internet with cable

  I have an old laptop Tecra of 3 year (out of warranty).
  Last week, he stopped to connect to the internet with a cable. I tried several cables and jacks. No idea what to do?

  LAN card is entered correctly in the Device Manager?
  LAN port has two leds, green and orange. Green LED is turned on when you connect the LAN cable?

• How can I access the internet with my Apple TV

  Is it possible to access the Internet with my Apple TV which I can do with my laptop Smart TV and my Macbook Pro?

  Do you mean to display web pages?

  If AppleTV 1-3 have thus no such ability / AppleTV 4 does not have this capability built-in, if there is an application of browser for him however, you might be in luck.