Cannot use all the disk space

Similar Questions

• help I INSTALLED WINDOWS 7 32 BIT on a DELL MINI WITH the help of 7 GB AND IT has TAKEN ALL the DISK SPACE

  I installed WINDOWS & HOME PREMIUM 32 BIT on MINI DELL A WITH 7 GB OF DATA AND IT has TAKEN ALL the DISK SPACE. I HAVE A SEAGATE 90 GB USB DRIVE BUT CANT PUT ANY can I FILE ON IT help

  Windows 7 requires 8 to 10 GB of disk space, the larger page file. Cannot move files off Windows storage on the site. Try the release of disk space by using the following:

  Strategies to free disk space - Windows - Microsoft

• Cannot use all the tools in my annotations of design ideas in to work?

  Cannot use all the tools in my annotations of design ideas in to work?

  Probably because you have touch Active Mode. You can turn it off via the toolbar button or the following preference parameter: Edit > preferences > General > Mode Touch > never

• May not use all the available space in the data store

  Hello

  We have a HP DL580 G7 Server P410i raid controller with 8 x 1 TB HDD.

  I create a raid 1 with 2 hard drives (1 TB) and raid 5 with 6 hard drives (5 TB) and install ESXi 5.1 in the first data store (1 to).

  After installation when I tried to create the 5 TB data store, (ESXi detects and displays the space available 5 TB) it does use that almost 2.5 TB! and may not use all the space

  I also installed the ESXi 5.5 but still no luck.

  This Ko seems to apply to you: http://kb.vmware.com/kb/2006942

• ESXI 4.1, 348481 Question about data store, not be able to use all the free space?

  I am working on installing ESXi 4.1 on a Dell R710 with 3.7 to with SATA, RAID 5 disks. My problem is when I'm going to create my store of data it shows I have 3.7 TB of free space. I told him to use all but the data store comes out 1.63 TB. I deleted that and made a 1 TB data store, but when I went to create a new one he would not give me the ability to use the remaining free space. I'm really green when it comes to the implementation of VMWARE for any help would be greatly appreciated.

  Thank you, Don

  Hello.

  The maximum size for a single volume must be 2 TB - 512 bytes, as described in KB 3371739.  Use the RAID Dell utilities to carve up the storage volumes of that size or smaller.

  Good luck!

• Since installing CC 2014, photoshop sucks all the disk space on my mac

  I use photoshop on a daily basis for 15 years with rarely a problem.

  However since installing PS CC 2014, at least once a day I have to restart because photoshop gives me no space left on the hard disk to save the file.

  What is the solution?

  David

  Noel,.

  It was the answer. As soon as I saved and deleted a record 54 GB, everything was fine.

  David

• Advanced options of Windows 7 Search Index cannot use all the filter?

  Hello from the Germany,

  When I open the Advanced Search Options, I can add fileextensions and customize them as a filter property or goods and the contentfilter ONLY.

  There are a lot of other xml e. f. filter-filter, filter html etc.

  Is is possible to add fileextensions and use a filter more than only the cleartextfilter or properties of filter.

  Example: I add a filetype .ok. This file contains xml code. When I serch for the content, the content of the file 'ok' is not displayed.

  When I rename the file with the extension "xml", Windows Search shows me the content.

  So, if anyone has any idea I will be very grateful.

  Kind regards

  Regina

  If you are uncomfortable with changing things in the registry, you can.  (WARNING: playing with registry can destroy your computer.)  In the registry editor, see HKEY_CLASSES_ROOT\.xml.  See how there are string values called PerceivedType and Type of text/xml content with the text, and an entry named PersistentHandler with a string value named (default) set to {7E9D8D44-6926-426F-AA2B-217A819A5CCE}.  You want to go to HKEY_CLASSES_ROOT\.ok and put new it values of string such as .xml.

  You can copy the following lines, paste it into a txt file, rename with txt changed to reg, and then run the reg file.  Which will create your registry required and programming changes will appear in the Indexing Options in the way you wanted.

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\.ok]
  @= "okfile".
  "Content Type"="text/xml".
  "PerceivedType"="text".

  [HKEY_CLASSES_ROOT\.ok\PersistentHandler]
  @= "{7E9D8D44-6926-426F-AA2B-217A819A5CCE}".

• I had to reinstall windows on my Dell XPS recently. I used all the original disks and now I get an error when I try to activate it. I entered the product key and it says that it is incorrect.

  original title: Windows Visa re - install

  I had to reinstall windows on my Dell XPS recently. I used all the original disks and now I get an error when I try to activate it. I entered codes product etc. According to the disks but still no joy. How to solve this?

  Kind regards

  John Welsh

  I had to reinstall windows on my Dell XPS recently. I used all the original disks and now I get an error when I try to activate it. I entered codes product etc. According to the disks but still no joy. How to solve this?

  Kind regards

  John Welsh

  Activate by phone

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
  Please note this step #9

  If the activation service informs you that she has failed and cannot help with activation, then STAY ON THE LINE and your call will be transferred to an operator of activation which will help you to activate your copy of Vista. The operator will give you all the numbers to ID of Confirmation if they accept that your copy of Vista is legitimate.
  NOTE: The operator just explain your situation and what you did to require activation. (EX: hardware upgrade, installed Vista on a new computer after uninstalling it from the old one, etc...)

• I want to view the properties of folders of files and the size of the files used on the right by clicking on them and the properties of the workstation to see the disk space used. __

  I have trouble finding the disk space used by files and folders individually and when I try to know how much is consumed and free by right click on my computer.  This was easy in XP, but I can't get the answers I need to analyze which uses space, where and how.  What is happening with this?

  Hi NativeLegal Eagle,

  Usually, right-click on the file or folder and clicking the properties option will give the details of the file or folder. The details include, type, size, location, size of the file on the disc etc.

  Make a right click on my computer will not give the details of available disk space on the computer.

  If you want to know the amount of space consumed by a program, then it can be found in the Add/Remove Programs window.
  a. Click Start, click Run, type appwiz.cpl, and then click ok.
  b. in the list, we can find the total space used by individual program running on the computer.

  Note: If nothing is listed in the file properties window or a file, then provide us with more information, so that we can better help you.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista PC keeps filling the disk space

  Windows Vista PC keeps filling the disk space, but programs like Treesize and Windows Explorer are not all of the additional files.

  The disc has about 45 GB of files, but the 220 GB drive is almost full. I suspect that a program will create orphaned files. CHKDSK is currently suspended from the second pass. Will try to run until the end of the day to the next.

  I turned on the hidden files and protected, it is not that I can't see the files. What can account for 150 + GB of invisible disk space?  Indexing of Windows seems to be active, although the C drive was marked to not be indexed.

  I know that a temporary internet file (content.ie5) is doubly hidden. Who had only 50 MB in it, so it's not the culprit. Any other hidden super-fichiers that everyone knows.

  Running Trend Micro PC-Cillin. The history of this creation of orphaned files?

  All the tools that look right at the MFT to see what is using the disk space and the avoidance of the directory tree?

  This isn't a matter of a few directories being wholesale, or clean old files. The space used is not anywhere to be found.

  Already run cleaning ccleaner and disk. Empty temporary files, Recycle Bin, etc. Only restore point. Registry clean with ccleaner.

  Never did anything on computer that could use 150 GB of space.

  If you look at just the computer, you can see disappearing disk space (maybe 1 GB an hour).

  Always seems to happen if you disconnect from the internet.

  Friend PC, so I did not have immediate access to it.

  Whence the free number 'space '? I'm just that an orphan file will not be displayed in a search in directories or with Treesize, but will use up to 'free space '?

  No sign of a virus.

  Hello

  Were there any changes made on the computer before the show?

  I suggest to refer to the article and try to defragment the hard disk:

  Improve performance by defragmenting your hard drive

  I understand that you have already scanned the hard drive with anti-virus software, although I suggest you try to run an online scan and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know if it helps.

• 100% use of the disk in the Task Manager when you use Photoshop CC (8.1-64-bit Windows)

  Hello

  I have been using Adobe CC for a month or two now. I have an Asus laptop with Intel Core i7 (2.4 GHz), 6 GB RAM, 1 TB hard disk space and 64 bit, almost 6 months old. Following apps are installed: Photoshop, Illustrator, InDesign, Audition, Acrobat Pro XI, Premiere Pro and Media Encoder. I recently did an update through Adobe CC for Photoshop and Illustrator, all the others are up to date.

  I think, but I could be wrong, since this update Photoshop is weird on my laptop. When I run Photoshop, my task manager immediately indicates a rate of 100% of my use of the disk. This seems to be off, after it is fully operational, but when I start to edit a file, the use of the disc immediately breaks back to 100%, while the CPU remains below 10%, RAM stays 3, 5-3, 8 GB (only 60% of total capacity) and even the actual read and write speeds of my HARD drive are not particularly high (5-10 MB max). And because of the use of the disk of 100%, Photoshop freezes in an instant and operating it is almost impossible.

  I already uninstalled Photoshop, passed all services and * that could trigger it in Windows 8.1 (Google search for: 8.1 Windows disk use 100%), re-installed Photoshop and I still have the same problem.

  So, I was wondering if there could be a solution to this problem or if anyone else has this problem as well?

  Thanks in advance!

  UPDATE: this error only applies when trying to manipulate, add, change or delete the text. All other functions (unrelated to the text) seem to work fine.

  Check out this help file: troubleshooting fonts | CS6 2014 CC, CC, Photoshop, CS5

  You can also try resetting Photoshop preferences and increasing the amount of ram available to Photoshop, if troubleshooting doesn't help.

• I want to monitor the disk space and CPU on a windows - DONT see machine

  I want to check the disk space and CPU on windows server 2003 box - DON'T see pltform for windows box all 'fileserver mount' or 'CPU '.  I do not see these services
  for my UNIX/LINUX platforms. What controls what in health platform services, and WHY doesn't show the windows platform the platform services. I have Server 3.02
  talk to the windows client running 3.02 box. I just reinstalled the client on windows
  box and still the same. Nothing in the health platformservices). I restart the HQ server and its
  client also. NOT knowing how to manage the windows box. I can go in manually and add an assembly file server service and name it and then this name appears in the services of the platform
  health. I shouldn't this for CPU, NetworkServer or mount fileserver interface. ???  I talked to John Mark Walker and is well why this is happening?

  I'm not an expert but I have encountered this problem also.  That's why I think it happened to me.

  1. I installed the server and checked it was running and I was able to connect to Headquarters.
  2. I installed my agent on another box and as soon as he said it started successfully killed him so that I could go ahead with the installation of the agent as a service.
  3. I installed the agent as a service and started it.
  4. this particular agent in central administration did not show one of the hard disks or WIN32.

  I fixed it by deleting the agent and put it back.  After you start the agent for the first time and it communicates with the server let it run for a while before you kill to install as a service.

  1. stop the service of the agent on the windows machine
  2. open your command line, change to your agents directory and run hq-agent you to uninstall as service
  3 remove the data of your agent directory folder
  4. use the download of SERVER installation to install your agent
  a. by running setup.bat - full (option 3 for the installation of the agent)
  5 finish the installation of the agent so that your window says 'agent started successfully.
  6. DO NOT CLOSE THIS WINDOW
  7. connect to your HQ and accept your inventory of auto-discovery, access this resource, and you should see that it is only partially completed
  8. Refresh every few minutes and you should see all the icons of availability to change green checks and your additional question as disks and CPU added.
  9. once filled close your agent, install it as a service, and then start it again.

  I was killing my initial discovery officer before he could finish, looks like you have the same symptoms.

• Calculate the disk space required for the INDEX

  Hello
  
  How to calculate the disk space required to create an INDEX? Please tell me where I can get the details of resources.
  
  For example:
  I need to create a non-UNIQUE INDEX on the columns, an approximate size would do.
  
  < PRE >
  NOT NULL DATE EVENT_DATE
  APPT_DATE_SLOT VARCHAR2 (15)
  EVENT_STATUS VARCHAR2 (4)
  < / PRE >
  
  The table has some 7 300 000 rows. I would like to know how to calculate too.
  
  All AIDS are very much appreciated.

  A rough estimate of the index space will need is possible by

  adding the actual length expected from each column, plus 6 for the rowid, 2 for the number of the X-header of the rows in the table that will be so an entry

  Date are 7 bytes internal + 15 + 4 + 2 + 6 = 34 X 7.3 M = 248200000 X General fresh for the block header, initrans, etc...

  We will use 20% overhead block or 1.2 X 248200000 = 297840000, which is about 285 M

  The actual distribution will vary according to your method of range tablespace.

  HTH - Mark D Powell.

• Cannot open email in Hotmail via Firefox. I have Vista installed on the pc and Windows 7 on the laptop, but cannot access all the features of Hotmail.

  Cannot open email in Hotmail via Firefox. I have Vista installed on the pc and Windows 7 on the laptop, but cannot access all the features of Hotmail. I tried to clear the cache and restart Firefox, but I still cannot use Hotmail.

  Not this problem when I go to Internet Explorer.

  Hello, it was noted that the foxit pdf plugin is causing this issue. You can disable this plugin in firefox > addons > plugin until what foxit offers a patch/update for the plugin.

• ITunes is downloading all items purchased from my iPhone, including tv shows and movies, using all the memory and batteries

  ITunes is downloading all items purchased from my iPhone, including tv shows and movies, using all the memory and batteries, does anyone know how to stop this?

  Hi anthony248,

  If you don't want the automatic downloads enabled on your iPhone, follow the steps outlined in the article below, except that you will turn off the switch rather than turn them on.  I'll also include a link about the storage capacity of your iPhone and how to delete items that you don't want.

  Turn on automatic downloads

  Check your storage space on your iPhone, iPad and iPod touch

  Take care